Remko Grelec Remko Clk 70 - Letnik 2025 nakup rabljenega (18.141)

Stanje: dober (rabljeno), Heater blower, mobile heater, gas heater, gas blower - Output: approx. 30 kW Lodpfeb A Hyujx Al Nork - Dimensions: 620/340/H540 mm - Weight: 20 kg

Stanje: dober (rabljeno), Heating blower, mobile heater, gas heater, gas blower - Power output: adjustable up to 50 kW - Connection pressure: 0.35–1.5 bar - Air flow rate: 1,000 m³/h - Weight: 20 kg Ledpfx Aleb A Iwas Njrk

Stanje: dober (rabljeno), Hot air blower, mobile heater, gas heater, gas blower - Output: adjustable, 30 kW - Consumption: 2.3 kg/h - Connection pressure: 0.35–1.5 bar - Air flow rate: 1,000 m³/h - Weight: 21 kg Lsdpfx Ajb A S Dbjl Nerk

Stanje: dober (rabljeno), Heater blower, mobile heater, gas heater, gas blower Lrodob A S Daepfx Al Nsk - Output: adjustable, 50 kW - Consumption: 2-4 kg/h - Connection pressure: 0.35-3.0 bar - Air flow rate: 1,570 m³/h - Weight: 32 kg

Stanje: pripravljen za uporabo (rabljen), Siemens 1FK7063-2AF71-1RH0 SN: YFP0640542025005 Motor - Encoder AM20DQ IP56 / Zavora 24VDC 18W 13Nm, strokovno popolnoma obnovljen in testiran, z 12-mesečno garancijo, 100% delujoč. Obseg dobave v skladu s fotografijami. Na ta artikel dogovorjeni prodajni popusti ne veljajo. Za ceno prosimo povprašajte posebej! Lrsdpjx Duifsfx Al Njk

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Lrjdpjxdi Ezofx Al Nok • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Leto izdelave: 2002, Neat used press brake from Safan Lrsdpfx Alowz I Eko Nok Model CNCL K 170 3100 TS1 Safan TS1 control unit Capacity: 3100 mm x 170 tons CNC-controlled Y1, Y2, X, R, Z1, and Z2 axes CNC crowning Wila New Standard tool clamping

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: K 3945, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, hod: 300 mm, delovna širina: 3.100 mm, TECHNICAL DETAILS Pressing force: max. 1,700 kN Operating pressure: max. 345 bar Connected load: 11 kW WORKING AREA Working length: max. 3,100 mm Stroke: max. 300 mm Lrjdpowlqa Ssfx Al Nok MACHINE DETAILS Rated voltage: 3×400 V 50 Hz Weight: 12,500 kg Upper beam stop time: < 94 ms

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: H21279V00104, Leto izdelave: 2019, obratovalne ure: 15.226 h, nosilnost: 7.000 kg, dvižna višina: 5.250 mm, prosto dvigovanje: 150 mm, dolžina vilic: 2.000 mm, 7,000kg S+UVV 02/2026 Electric Forklift Truck 3rd+4th Valve No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 7,000 kg Lift height: 5,250 mm Ljdjyzfu Nspfx Al Nork Overall height: 3,780 mm Fork length: 2,000 mm Free lift: 150 mm MACHINE DETAILS Mast type: Full view Drive type: Electric Dimensions & Weight Dimensions (L x W): 6,000 x 1,700 mm Weight: 13,500 kg Battery: Hawker Ironclad 80V/8PzS/1376Ah (measured 82.35V) Operating hours: 15,226 h EQUIPMENT Former Linde full-service unit UVV certificate valid until 02/2026 Service valid until 02/2026 or within 1,000 operating hours Full view mast without central hydraulic cylinder Fully enclosed cab with heating, air conditioning, and wipers Facelift model with tilt angle display 3rd + 4th hydraulic valve Note: The forklift is sold without a fork positioner (inside 22-172 cm). The seller can optionally offer mast removal for €950 net. All measurements are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00-16:30. If the mast is too high for transport, it can be dismantled on request. If not collected on time, a storage fee of €20 per day per machine applies (payment must be settled before collection).

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 17 kW (23,11 KM), vrsta goriva: dizel, lastna masa: 1.228 kg, Leto izdelave: 2016, obratovalne ure: 1.197 h, gradbena višina: 1.800 mm, vrsta pogona: Diesel, Loader backhoe Condition, technical: normal Front tyres type: solid rubber Front tyres condition: 60 - 80% Rear tyres type: solid rubber Rear tyres condition: 60 - 80% Description: BOBCAT Skid Steer Loader S70 incl. bucket - Year of manufacture: 2016 - Model year: 2017 - 1197 operating hours (according to display) - Mechanical quick coupler - Tipping load (ISO 14397-1): 686 kg Ledpfjy E D H Sox Al Nerk - Rated operating capacity (ISO 14397-1): 344 kg - Hydraulic flow: 37.00 L/min - System pressure at quick couplers: 20.7 MPa - Max. travel speed (low range): 9.8 km/h - Kubota diesel engine D1005-E4B-BC-3 - Coolant: water - Power at 2400 rpm: 17.5 kW - Torque at 1425 rpm (SAE J1995 gross): 62.8 Nm - Number of cylinders: 3 - Operating weight: 1268 kg - Transport weight: 1109 kg - Width: 90 cm - Height: 1.80 m - Length: 2 m

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 25.000 € Leasing obrok: 480 € Pritisna sila: 70 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 25 mm/s Delovna hitrost: 5 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Lodpfx Aljynnd Es Nerk Višina: 2250 mm Teža: 1900 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), - RABLJENO - 7-OSNA SINHRONIZIRANA CNC HIDRAVLIČNA UPIGALNA STISKALNICA OSI: Y1 - Y2 - X - X1 - R - Z1 - Z2 DOLŽINA UPIGANJA: 3150 mm Lrjdpfxork Shco Al Nok PRITISK: 70 ton GLOBINA VRATU: 400 mm RAZDALJA MED STOJALI: 2640 mm ODPRTA VIŠINA: 450 mm HITROST PRIBLIŽEVANJA: 160 mm/sek HITROST POVRATKA: 160 mm/sek DELOVNA HITROST: 0-10 mm/sek MOČ MOTORJA: 15 kW KRMILNA ENOTA: ESA KVARA TEŽA: 7800 kg SKUPNE DIMENZIJE: 3400 x 2100 x 2650 mm

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW Lrodpjiq Uz Rsfx Al Nok ✔ Dolžina rotorja: 650 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 28 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 5 m3/h* ✔ Vsipna odprtina: 1446 x 1342 mm ✔ Dimenzije D/Š/V: 1,92/1,55/1,79 m ✔ Teža: 1750 kg 2 leti garancije ali 2000 delovnih ur

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 5.000 kg, dvižna višina: 7.270 mm, skupna dolžina: 5.670 mm, - Load capacity: 4,999 kg - Load center: 500 mm - Load distance: 540 mm - Axle load with load, front: 10,468 kg - Axle load without load, front/rear: 2,956 / 3,635 kg - Tire size front: 355/45-15 - Tire size rear: 250-15 - Number of wheels front/rear: 2x/2 - Track width front, single tires: 1,210 mm - Track width front, twin tires: 1,364 mm - Track width rear: 1,120 mm - Mast/fork carriage tilt, forward/backward: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm - Fork carriage: Category 3 / Type A - Aisle width with 1,000 x 1,200 mm pallet, crosswise: 4,470 mm - Aisle width with 800 x 1,200 mm pallet, lengthwise: 4,670 mm - Turning radius: 2,730 mm - Minimum pivot point distance: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load (at min. fan speed): 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: />30 % - Service brake: mechanical - Engine manufacturer/type: Deutz TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - No. of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Towing coupling: pin Lredpfxey E Uiks Al Nok

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 5.000 kg, dvižna višina: 6.050 mm, skupna dolžina: 6.450 mm, - Load capacity: 4,999 kg Lrodpoy E Uf Eefx Al Njk - Load center: 500 mm - Load distance: 540 mm - Axle load with load, front: 10,468 kg - Axle load without load, front/rear: 2,956 / 3,635 kg - Tire size front: 355/45-15 - Tire size rear: 250-15 - Number of wheels front/rear: 2x/2 - Track width front, single tires: 1,210 mm - Track width front, twin tires: 1,364 mm - Track width rear: 1,120 mm - Mast/fork carriage tilt, forward/backward: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm - Fork carriage: Category 3 / Type A - Aisle width with 1,000 x 1,200 mm pallet, crosswise: 4,470 mm - Aisle width with 800 x 1,200 mm pallet, lengthwise: 4,670 mm - Turning radius: 2,730 mm - Minimum pivot point distance: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load (at min. fan speed): 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: />30 % - Service brake: mechanical - Engine manufacturer/type: Deutz TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - No. of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Towing coupling: pin

Stanje: rabljeno, 70-metrska linearna lakirna veriga s sklopnim sistemom za prevoz več izdelkov v omejenem prostoru (glej video) Lrodpfxsivur Aj Al Nok

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 840D, premer vrtljive mize: 800 mm, največja hitrost vretena: 14.000 obr/min, dovod hladilne tekočine: 20 letvica, vhodna napetost: 400 V, DMU 70 3+2 osi Lrsdpfeyx Am Rox Al Nek Stroj je trenutno v prenovi. Novo vreteno Nova vodila osi Y in Z Zaščitni mehovi Opozorilna okna Meritve z BallBar vključno s protokolom Siemens 840D s Shopmill - ročno kolo Vreteno SK40, 14.000 rpm Menjalec orodij za 30 orodij Notranje hlajenje 20 bar Rezervoar s trakom filtrom 600l Transporter za ostružke Kabinska streha Merilna tipalka Izpiralna pištola Način delovanja 4 Dokumentacija Na voljo od 04/2026

Stanje: novo, Za ventil Herion 70322..... 1 set sestavljen iz: 1 bat 34,9/16,5/0/37 POM 1 obroč R15 20,5/32/4 FPM raven 2 tesnilna obroča K1 35,2/25/6,5 FPM utorni Lrsdev D U H Iepfx Al Nok 1 O-tesnilo 67 x 3 mm

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 4090, Width: 70 cm Thickness: approx. 1 cm Lrodpfeh Ek Saex Al Nek

Stanje: rabljeno, številka stroja/vozila: IntNr231520, A used 5-axis CNC machining centre, CHIRON FZ 08 S, manufactured in 1998, is available for sale. Technical Data: Machine type: 5-axis CNC machining centre / vertical machining centre CNC control: FANUC 21i-M (depending on version) Travel paths: X-axis: approx. 300–350 mm Ledpfoy Eid Njx Al Nork Y-axis: 250 mm Z-axis: 250 mm A-axis: 360° (with appropriate 5-axis/rotary axis configuration) B-axis / swivel axis: -20° / +110° Table size / clamping area: 550 x 300 mm Max. workpiece weight: up to approx. 50 kg (as per market indications) Tool magazine: 12 tools Spindle taper: HSK-A 40 Spindle speed: up to 10,000 rpm Spindle motor power: 3.7 kW Machine weight: 1,820 kg Dimensions (L x W x H): 2,050 x 2,250 x 1,900 mm The machine may be inspected under power by appointment. Subject to prior sale. Technical data and information are subject to change and correction.

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: IntNr231553, used CNC Swiss-type automatic lathe STAR SR20R, year 1999 Control: Fanuc, Series 18i-T 7 axes (X/Z/Y/C1/X1/Z1(C2)), max. bar diameter: 20 mm, max. turning length: 205 mm, Main spindle, max. speed: 10,000 rpm, C-axis increments: 0.001°, Sub-spindle with collet, max. speed: 8,000 rpm, with C-axis, Ledpfx Aljy Eh H Ao Nerk Tool holder for up to 19 tools (linear tool holder, front tool post, rear machining), parts conveyor belt, standard guide bushing unit Bar feeder FMB turbo 3-26/3200 / A /, year 1999 Coolant used: oil. Fire extinguishing system by Kraft & Bauer The machine can be inspected under power by prior appointment. Technical data and information subject to change and error; machine may be sold prior to completion of sale!

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: IntNr231552, STAR CNC Swiss-type lathe SB 16C, year 2004 CNC control: FANUC 18i-TB Technical data - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm Lredpfx Alsy Eh Hie Nsk - Minimum C-axis resolution: - Number of tool positions: 8 - Number of driven positions: 3 Bar loader: FMB Minimag /3200 / A Bar diameter: 2 - 16 mm Bar length: 3200 mm Kraft & Bauer compact fire suppression system Operating manual The machine can be inspected under power by appointment. Subject to prior sale and to changes or errors in technical data and specifications!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 43.000 h, številka stroja/vozila: IntNr231372, STAR SA 16-12 CNC lange draaislijpmachine, bouwjaar 2000 CNC-besturing: FANUC 18i-T Bedrijfsuren: 43.000 Technische gegevens - Aantal assen: 5 - Aantal spindels: 2 HOOFDSPINDEL - Max. stafdiameter: 12 mm - Z-as verplaatsing: 140 mm - Spilsnelheid: 8.000 tpm - Spindelaandrijfvermogen: 2,2 kW - Aantal gereedschapsposities: 13 TEGENSPINDEL - Max. stafdiameter: 10 mm - Spilsnelheid: 8.000 tpm - Aantal gereedschapsposities: 4 Lodpfxey Eh E Ss Al Nerk FMB Minimag stangenaanvoermagazijn De machine kan na afspraak onder stroom worden bezichtigd. Wijzigingen, vergissingen in technische gegevens en specificaties, alsmede tussentijdse verkoop voorbehouden!

Leto izdelave: 1977, stanje: rabljeno, številka stroja/vozila: IntNr231519, A used Jung HF 40 surface grinding machine, year of manufacture 1977, is for sale. This is a robust, heavy-duty model. Technical data: - Type: hydraulic - Table size: 400 x 150 mm - Grinding length: 400 mm - Grinding width: 150 mm - Grinding wheel diameter: 200 mm Lrjdjy Ehh Topfx Al Njk - Grinding wheel width: 16 mm - Spindle speed: approx. 2,800 rpm - Table speed: stepless, 2–20 m/min - Automatic vertical feed: 0.002–0.013 mm - Machine weight: approx. 900 kg - Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and to alterations and errors in the technical data and specifications!

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 145.113 h, številka stroja/vozila: IntNr231565, Zu verkaufen: Hochdynamischer CNC-Produktionsdrehautomat Gildemeister Speed 12-5 mit Lademagazin IEMCA Smart 316 Baujahr: 2004 Steuerung: Fanuc 16i-TB Technische Daten: HAUPTSPINDEL - Max. Stangendurchmesser: 12 (15) mm - Verfahrweg: 120 mm - Spindeldrehzahl: 12.000 U/min - Spindelantriebsleistung: 3,7 kW - Drehmoment: 6 Nm GEGENSPINDEL - Max. Stangendurchmesser: 12 (15) mm - Spindeldrehzahl: 12.000 U/min - Spindelantriebsleistung: 3,7 kW - Drehmoment: 6 Nm Angetriebene Werkzeuge: Leistung Werkzeugantriebe: 1,1 kW Maximale Drehzahl: 6.000 U/min Werkzeugbestückung: Gesamtwerkzeugplätze: bis zu 20 (davon mehrere angetrieben) Angetriebene Werkzeuge: 4–6, geeignet für Fräs-, Bohr- und Gewindeschneidoperationen Werkzeugaufnahme: ER-Spannzangen oder vergleichbare Systeme Rückseitenbearbeitung: 4 Stationen Stangenlademagazin IEMCA Smart 316 / 32L Baujahr: 2006 Lrsdsy Ehdbjpfx Al Nok Stangendurchmesser: 5–32 mm Stangenlänge: 3.200 mm Weitere Ausstattung: - Kompaktlöschanlage / Objektlöschanlage Kraft und Bauer - Betriebshandbuch - Teileseparator - Späne-Ausschwemmanlage Besichtigung nach Terminabsprache unter Strom möglich. Technische Änderungen, Irrtümer und Zwischenverkauf vorbehalten!