Rem Navpična Stružnica Za Struženje nakup rabljenega (84.693)

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Notranji premer: 63 mm Zunanji premer: 800 - 320 mm Globina brušenja: 380 mm Dimenzije brusnega kolesa: Ø 65 x 25mm (posodasto kolo) Podajalna hitrost: 0,05 - 0,40 obr/min / 8-stopenjska obr/min Skupna potrebna moč: pribl. 1,1 kW Teža cca: 1060 kg Mere stroja cca. DxŠxV: 1,1 x 1,1 x 1,4 m Stružnica in brusilni stroj za zavorne bobne in kolute - Max./min. premer struženja in brušenja: 800 / 320 mm - Vpenjanje zavornega bobna: 63 mm, hod pinole 120 mm - Vzdolžna pomikalna miza: vzdolžna pot 380 mm; prečna pot 200 mm - Nosilec za brušenje: prečni hod 60 mm; motor = hitrost vrtenja 3410 obr/min - Upravljanje preko kontrolne plošče Nwjdpfeu Ngausx Ah Uog

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres Nwjdpfx Ahju Ix Arj Ueg

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Nwjdpju Ix Dcofx Ah Ueg Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Accessories: - Chuck key - Tool holder - 2 gears Nwedpfju Ix E Hex Ah Ujg

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment Njdpfjvadd Isx Ah Ujwg

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Nwodpovvrpkefx Ah Ueg Live centre in tailstock 4-way quick-change tool post Coolant system Accessories: various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations!

Stanje: rabljeno, Leto izdelave: 1998, Tehnični podatki: Notranji premer: 63 mm Obodni premer: 320 - 800 mm Globina brušenja: 380 mm Skupna potrebna moč: ca. 1,1 kW Pomik: 0,05 - 0,40 mm/ob / 8 stopenj U/min Teža pribl.: 1060 kg Dimenzije stroja (D x Š x V): 1,1 x 1,1 x 1,4 m Stružnica za zavorne bobne in kolute - Največji/najmanjši premer struženja: 800 / 320 mm - Nosilec zavornega bobna: 63 mm, hod pinole 120 mm - Premik prečnega sanika: vzdolžni hod 380 mm; prečni hod 200 mm - Nosilec orodja: 180 x 140 mm, nosilec orodja 58 mm, stružni nož za držalo izmenljivih ploščic 20 x 20 mm Nodpju Ngciefx Ah Uowg - Upravljanje preko nadzorne plošče

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 460 mm Nodpfx Ahewa Nwfo Ujwg Premer struženja nad suportom: 350 mm Dolžina struženja: 1500 mm Višina konice: 250 mm Vrtina delovne vretena: 52 mm Območje vrtljajev: 35 - 1800 min⁻¹ Hod pinole konjička: 230 mm Konjičkovo vpenjanje MK: MK4 Približna teža stroja: 2,7 t Dimenzije stroja pribl. D x Š x V: 2,88 x 1,2 x 1,5 m Črpalka za hladilno tekočino z dovodom do ročnega ventila Pribor: luneta D = 130 mm zaprta 3-čeljustna vpenjalna glava D = 315 mm Forkhardt F315

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 97.593 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 65 mm, izvrtina vretena: 79 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 25 obr/min, For sale: Gildemeister MF Sprint 65 CNC Lathe with 3-meter bar feeder, as shown in the pictures. The machine was dismantled from our workshop in fully functional condition. A video of the machine in operation prior to disassembly can be provided upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (main spindle side) were renewed, including bearings and belts. A new HMI interface was recently installed. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: SIMAG 65.1-3200G, Year 1998 Bar length: 3 m Bar diameter/spindle bore: 65 mm Main drive Nsdewym Nfspfx Ah Uowg Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Thread cutting rapid feed rate: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool turret Number of tools: 8 Shank Ø according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Coolant system - Chip conveyor - Documentation

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, A mechanically refurbished vertical pick-up turning center VSC 250 by EMAG is being offered. All control components of the Siemens 840 Dsl CNC system have been tested. Depending on your requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, part turner) and additional peripheral equipment such as chip conveyors, coolant systems, etc. CONTROL SYSTEM Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-axis travel: 860 mm Z-axis travel: 200 mm Nwsdpfx Ahjh Ryp Ss Ujg MAIN SPINDLE Power: 28 kW TOOL TURRET EMAG disc-type turret, 12 stations, VDI 40 Delivery time and additional machine options upon request.

Stanje: dober (rabljeno), Leto izdelave: 1997, Also available: CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis CNC lathe is a robust and precise medium-sized slant bed CNC lathe with an approximate turning length of 700mm, a bar capacity of 42mm, and a 12-position automatic turret with live tooling. It features a FANUC 18-T CNC control with a color LCD screen and an RS232 serial interface for data transfer. ASA 5″ spindle Max speed: 4,200 rpm Continuous C axis Spindle power: 20HP Njdevtrc Sopfx Ah Ujwg X-axis travel: 172mm Z-axis travel: 575mm Machine weight: 4,000 kg The machine comes complete with a 210mm AUTOBLOCK hydraulic chuck, tool presetting system, programmable tailstock, 2 live tool holders (1 axial and 1 radial), chip conveyor, a set of fixed and manual tool holders, and backup disk. Year of manufacture: 1997. CE compliant and in excellent condition.

Stanje: rabljeno, Leto izdelave: 2010, Technical details: Nsdpetpq Urefx Ah Uowg Swing diameter: 260 mm Control: 840 D SIEMENS Speed: 3,500 rpm Spindle motor: 36 / 28 kW Chuck diameter: 260 mm Travel distance - X axis: 900 mm Travel distance - Z axis: 400 mm Turret: 12 positions Tool holder: VDI 40 Rapid traverse in X and Z direction: 100 / 30 m/min Space requirement approx.: 5.3 x 2.4 x 3.31 m CNC vertical turning machine with 2 spindles, 2x RÖHM power chucks D 315 mm,

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: 104113, sestavljen iz: CNC stružnica EMAG VL3 V6.1, letnik 2012, serijska št. 104113 ter CNC stružnica EMAG VL3 V6.1, letnik 2012, serijska št. 104114, vsaka z CNC krmiljenjem FANUC SERIES 32i-MODEL A, robotskim sistemom za nalaganje z FANUC M10iA, letnik 2012, vsaka stroj dodatno z filtrirnim sistemom WW ME-FI 600, sistemom za odsesavanje odrezkov Sermeto HENNIG 30 S, hladilno enoto EMAG, napravo za hlajenje, sistemom za transport obdelovancev in ročno upravljalno ploščo. Nsdpfey Sqgxox Ah Ujwg

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Turning length 600 mm Control system FANUC, 18i-TB Nwodjy Tpliepfx Ah Usg Swing over cross slide 230 mm X1-axis travel 165 mm Z1-axis travel 700 mm X2-axis travel 190 mm Z2-axis travel 720 mm Y-axis travel +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Sub-spindle bore 76 mm Sub-spindle speed 5,000 rpm Sub-spindle motor 22 kW Spindle torque 208 Nm Turret 2 x 12 stations Number of driven tool stations 2 x 12 Driven tool speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y-axis 7.5 m/min Total power requirement 68.4 kVA Accessories: Collet chuck KITAGAWA, CRS 66, on main spindle; Hydraulic 3-jaw chuck KITAGAWA, BB208, 210 mm dia., on sub-spindle; Various tool holders for turret; Short bar loader by HYDRAFEED, type MULTIFEED MX-1B for bar diameters 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor; Coolant system with belt filter unit

Stanje: rabljeno, Leto izdelave: 2011, Technical details: Standard turning diameter: 200 mm Turning length: max. 810 mm Control: MSX-701 MAPPS IV Swing diameter over bed: 800 mm Max. distance between centers: 1130 mm Max. turning diameter: 320 mm Max. workpiece diameter: 300 mm Bar diameter: 65 mm X-axis travel 1: 210 mm X-axis travel 2: 210 mm X-axis travel 3: 210 mm Y-axis travel 1: 110 mm (+65/-45) Y-axis travel 2: 110 mm (+45/-65) Z-axis travel 1: 300 mm Z-axis travel 3: 300 mm Z-axis travel 2: 810 mm B-axis travel: 870 mm Spindle speed range: 5,000 rpm Number of spindle speed ranges: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Spindle bearing diameter: 120 mm C-axis: 0.001° Spindle speed range: 5,000 rpm Spindle nose: JIS A2-6 Spindle bore: 73 mm Max. bar diameter: 65/52 mm Spindle bearing diameter: 120 mm C-axis: 0.001° Number of turrets: 3 Number of tool stations: 16 x 3 = 48 positions Shank height for square tool: 20 mm Shank diameter for boring bar: 32 mm Turret indexing time (4 stations): 0.18 sec Number of driven tools: 16 x 3 = 48 positions Max. speed of driven tools: 6,000 rpm Machining capacity of turning tool: M16 / Ø16 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 20 m/min Nwsdpfx Asy S Tm Uoh Ueg Rapid traverse Z-axis: 50 m/min Drive power - spindle motor: 25 / 22 kW Drive power - driven tools: 7.5 / 5.5 kW Total power requirement: 92.7 kVA Machine weight approx.: 9.4 t Space requirement approx.: 4.0 x 2.8 x 2.4 m Accessories: Chip conveyor Coolant system C-axis main and sub spindle 2 x Y-axis Part counter Total counter Tool measurement system Parts catcher from above with conveyor belt Spindle 1: power chuck SMW KNCS-N 210 / 52 mm Spindle 2: collet chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann loading robot with infeed and outfeed conveyor for shaft parts The NZ2000 T3Y2 features 2 spindles and 3 turrets. Two turrets are equipped with Y-axis function and built-in milling motors. This enables simultaneous machining with 3 turrets. High-performance and high-speed machining can be achieved using up to 48 driven tools. For automatic loading, a Lehmann robot with infeed and outfeed conveyors for shafts is used. The machine has been maintained by the in-house maintenance department and Mori Seiki. The machine can also be sold without the robot.

Stanje: rabljeno, Leto izdelave: 1957, Premer struženja nad posteljo: 800 mm Premer struženja nad suportom: 540 mm Dolžina struženja: 4000 mm Višina konic: 400 mm Nwodoxwp Ehopfx Ah Ujg Razdalja med konicama: 4000 mm Vrtljaji vretena: 9 - 1140 o/min Premer vretena: 96 mm Teža stroja pribl.: 8,5 t Dimenzije stroja (D x Š x V): 7,0 x 1,70 x 1,70 m - z mostom - Oprema: Trivrata vpenjalna glava FORKARDT 400 mm, štirivrata vpenjalna glava 500 mm, čelna plošča 800 mm, digitalni prikaz na oseh X in Z ACU-RITE, Glava MULTIFIX z več vložki, 2 fiksna luneta, 1 gibljiva luneta, sredinski konic, naprava za hlajenje

Stanje: rabljeno, Swing diameter over bed: 410 mm Swing diameter over cross slide: 240 mm Turning length: 1000 mm Centre height: 205 mm Centre distance: 1000 mm Nwodpjvcrmcefx Ah Uog Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpm Feeds - longitudinal: 0.03 - 8.8 mm/rev Feeds - cross: 0.006 - 1.84 mm/rev Threads - metric pitch: 0.25 - 76 mm Threads - imperial: 1/2 - 152 TPI Threads - module: 0.25 - 22 mm Bed width: 320 mm Tailstock quill diameter: 55 mm Tailstock taper: MT 4 Cross slide travel: 290 mm Top slide travel: 120 mm Total power requirement: 5.5 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 2.32 x 1.15 x 1.22 m Accessories: RÖHM 3-jaw chuck 160 mmø, MULTIFIX toolpost with 2 tool holders, stationary steady rest, centre, coolant system

Stanje: rabljeno, Premer struženja nad posteljo: 460 mm Premer struženja nad prečnim suportom: 256 mm Dolžina struženja: 1250 mm Razdalja med konicama: 1250 mm Višina konice: 230 mm Premer vretena: 55 mm Hitrosti vretena: 35 - 1800 min⁻¹ Teža stroja: ca. 2,7 t Nodexwp Ebopfx Ah Uewg Dimenzije stroja D x Š x V: 2,75 x 1,20 x 1,42 m Oprema: Tročeljustna glava Ø250 mm, MULTIFIX glava s 3 vložki, fiksna luneta

Stanje: rabljeno, Premer struženja nad posteljo: 430 mm Premer struženja nad podporo: 230 mm Dolžina struženja: 1000 mm Njdpoxwp Enofx Ah Uowg Višina konice: 215 mm Razdalja med konicami: 1000 mm Vretenina odprtina: 56 mm Število vrtljajev vretena: 19 - 2000 min⁻¹ Skupna potrebna moč: 7,5 kW Teža stroja pribl.: 1,9 t Dimenzije stroja D x Š x V: 2,78 x 1,25 x 1,40 m Oprema: 3-čeljustna vpenjalna glava 250 mmø, 4-pozicijska glava za orodja, fiksna luneta

Stanje: rabljeno, Leto izdelave: 2007, CNC stružno-rezkalni center CTX 410 - leto izdelave 2007 Krmiljenje Heidenhain Plus IT Nsdpfx Aoxy Nqcoh Uowg - 3-čeljustni vpenjalni tulec - Pogonska orodna mesta - Konjiček - Transporter za ostružke - Rezervoar za hladilno tekočino

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Hello, I am offering for sale a renowned brand CNC LATHE DMG GILDEMEISTER CTX 420 Linear V4 with C and Y axes, and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS overlay for program generation Country of origin: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tool positions for VDI 40 holders (all stations driven) - Max spindle speed: 5000 rpm - C axis Nwedpfx Ajxcupcsh Uog - Y axis - Driven tools - Max turning length (Z axis): 635 mm - Max turning diameter (X axis): 325 mm - BERG spindle chuck, diameter 200 mm - Max bar diameter: 66 mm - Cooling system - Hydraulic tailstock – programmable - Chip conveyor - Spindle motor power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own service team — both stationary and mobile - We have sold over 700 DMG machines - Possibility to commission the machine at the customer’s site - Operator training and delivery to the customer included in the price - All our machines have undergone a professional technical inspection — ready for operation - Machine purchase possible via installment plan or leasing.

Stanje: dober (rabljeno), Premer struženja nad ležiščem: 430 mm Premer struženja nad supportom: 220 mm Dolžina struženja: 1500 mm Premer pinole: 80 mm Hod pinole: 200 mm Stožčasta vpenjalna v pinoli zadnjega konjička: MK-5 Hitrost vrtenja: 14 - 2240 obr/min Moč: 12,4 kVA Premer vretena: 60 mm Teža stroja cca. 2800 kg Ta stružnica L&Z TOS Trencin je v dobrem stanju. Dodatki: - 3-osni digitalni prikazovalnik - 9 nosilcev rezil - Sledilna luneta - Luneta do D=110mm - 3-čeljustna vpenjalna glava Njdey Hxq Uepfx Ah Uswg

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated Njdpfx Ahjxp Hmae Uowg - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: rabljeno, Leto izdelave: 1995, Machine for sale in parts / spare parts ..... CNC lathe, manufacturer: GILDEMEISTER Type: CTX 600, year 1995 Chuck: Forkardt 315 mm Tool turret Tailstock Steady rest Headstock Way covers and sheet metal panels Motors Machine is being sold as individual parts ..... Nwsdpfx Aenximush Uog Please ask for the parts you need, and we will send you an offer.

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Njdsu Eug Ispfx Ah Uswg Includes extensive accessories.