Omec 650 M nakup rabljenega (74.449)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Edge Thickness in Strips (min/max) mm: 1 Panel Thickness (min/max) mm: 8 - 60 Control Unit: ICOS Open Compact Feed Speed m/min (adjustable): 6 - 30 Top Pressure: Belt-driven Spraying Unit (for liquid non-stick agent) Adjustable Fence, CNC controlled Pre-milling Unit with CNC control 08.378 (2 x 4.5 kW) Iisdpjm Udfwefx Abxoc Lamps for panel side heating Gluing Unit (Hot Melt Glue + pre-melter) 04.1570 Spraying Unit (for separating fluid) Edge Pressure Zone Edge Magazine for Rolls (compartment no.): 16 Cross-cutting Unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile Milling Unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying Unit (for sliding fluid) Contour Trimming Unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping Copy Milling Unit 08.604 (4 x 0.25 kW) Spazzola Multi-profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.521 Spraying Unit (for polishing fluid) Buffing Unit 08.617-4 (4 x 0.18 kW) Surface Smoothing Unit 08.53

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Used machine Manufacturer: Kallfass GmbH Model: Fully automatic side sealing machine Universa 500 Year of manufacture: 2016 Dimensions: approx. 2150 x 1800 x 1550 mm (L x W x H) Weight: approx. 1050 kg Transverse sealing bar: 500 mm Film: center-folded film, approx. 12 - 80µm Maximum film roll outside diameter: 400 mm Maximum film roll width: 600 mm Min. product length: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power supply: 400 Volt three-phase current, 50 Hz with protective earth Rated output: 3.5 kVA Iodpsyw Rn Tofx Abxjic Rated current: 5.1 A Fully automatic bagging machine for packaging products – regardless of their length – with full wrapping and without film overlap. Product infeed is via a conveyor belt while simultaneously enclosing the product in center-folded film by means of a forming shoulder. Product indexing is performed via a photoelectric sensor. The feed belt is smoothly adjustable for different product widths. Longitudinal sealing is achieved by a continuous side sealing unit. The height position of the forming shoulder and sealing units is manually adjustable. Manufacturer: Kallfass GmbH Model: Shrink tunnel Compact 650 S Year of manufacture: 2016 Dimensions: approx. 1850 x 1400 x 1450 mm (L x W x H) Weight: approx. net 580 kg / gross 630 kg Technical data: Tunnel inside width: 650 mm Tunnel inside height: fixed at 200 mm Heated tunnel hood length: 1200 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in standalone operation Compact and economical shrink tunnel featuring the patented ring nozzle heating system with particularly effective air volume regulation. Fitted with continuously adjustable plastic link conveyor. This tunnel is especially suited for shrinking small to medium-sized products with medium throughput requirements. Offer valid for 30 days, subject to prior sale Functional guarantee, no warranty

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, številka stroja/vozila: 7203065, +++Demo machine, year of manufacture 2017+++ +++alternative color+++ Light soiling in the dirty water tank. Extremely maneuverable – turns on the spot - Multiple small disc brushes with increased contact pressure - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact design gives this model the necessary agility to work in confined spaces, as obstacles can be easily bypassed - Control panel with operating elements - Mechanical operation of brush, suction bar, and water quantity via lever - Tiltable dirty water tank for easier cleaning - Several small disc brushes with a suction bar directly behind them enable a short construction and an extremely tight turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the suction bar upon accidental impacts to prevent damage #scrubber dryer #cleaning machine #Cleancraft #cleaning equipment #cleaning device #ride-on scrubber dryer Ijdpefzk Ezjfx Abxsic #ride-on machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 670 mm, pomik po osi Z: 625 mm, hitro pomikanje X-os: 45 m/min, hitri pomik os Y: 45 m/min, hitri pomik na osi Z: 45 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC530, širina mize: 1.200 mm, dolžina mize: 540 mm, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 8.500 h, nos vretena: SK40, število vreten: 1, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, transportni trak za ostružke, S transportnim trakom za ostružke in stožčastimi nosilci orodij. Iiedpsx Ttd Nefx Abxec

Stanje: dober (rabljeno), Leto izdelave: 2013, Schleifdurchmesser 390 mm Schleiflänge 650 mm Spitzenhöhe 200 mm Gesamtleistungsbedarf 46 kW Iisdpfx Abow Inr Noxoc Maschinengewicht ca. 6 t Raumbedarf ca. 3x3x2,4 m Universal-Rundschleifen - Typ WUG21 (W27) Schleiflänge 650 mm EMAG Weiss steht für High-End-Technologie beim Universal-Rundschleifen zwischen Spitzen. Von der CNC-gesteuerten Maschinen WUG 21 bietet EMAG Weiss die passende Lösung für nahezu jeden Anwender. --> Technische Daten Schleiflänge max.: 650 mm --> Spitzenhöhe: 200 mm --> Schleif-Ø außen: 1-390 mm --> max. Gewicht fliegend MK4: 100 kg --> max. Werkstückgewicht zw. Spitzen: 250 kg --> Zustellung: --> X-Achsenweg: 480 mm --> Z-Achsenweg: 1.150 mm --> Werkstückspindelstock --> Reitstock --> Schleifspindelspindelstock --> Kühlmitteleinrichtung, Fabr. HYFRA --> Bandfilter, Fabr. Knoll, Typ KF 200/1600 - Baujahr 2012, --> Ölnebelfilter, Fabr. Cobaron

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 0-261-20-5976, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 20 m/min, model krmilnika: POWER CONTROL PC 20+, TEHNIČNI PODATKI Višina panela: 60 mm Debelina robu PVC-ABS: 3 mm Debelina robu iz masivnega lesa: 12 mm Dovodna hitrost: 20 m/min PODROBNOSTI STROJA Krmiljenje: POWER CONTROL PC 20+ Obratovalni tok pri polni obremenitvi: max. 33 A Največji motor: 9,7 A Največje gretje: 2,7 A Varovalka: 35 A Frekvenca: 50 Hz OPREMA Zgornji motorizirani gumirani pas Ročno vodilo za dovod Skupina proti sprijemanju Iedpjyzm E Njfx Abxjic Pravilna skupina Lepljenje z EVA-lepilom Držalo za robove Skupina za končno obrezovanje z avtomatsko nastavitvijo nagiba Izmenična obrezovalna in kotnikova skupina z dvema motorjema Linearno zaoblitvena enota z 2 motorjema Enota za strganje roba Enota za strganje lepila Krtačna enota Zunanja referenca: MMG014

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Transportni trak EP 650/3 – 800 mm – 6+3 – 15 MPa – PE/PA Na prodajo je visokokakovosten transportni trak z naslednjimi tehničnimi podatki: Širina: 800 mm Tip: EP 650/3 Poliestrska/poliamidna ojačitev 650 N/mm natezna trdnost 3 plasti ojačitve Pokrovne plasti: 6 mm zgoraj / 3 mm spodaj Kakovost gume: 15 MPa (standardna industrijska kakovost, odporna na obrabo) Material: PE/PA Iijdsxy Nr Topfx Abxsc Stanje: novo / neuporabljeno Dolžina: 196 m Področja uporabe Idealno za uporabo v: Kamnolomih in peskokopih Reciklažnih obratih Kmetijstvu Industriji in transportni tehniki na splošno Prednosti Visoka natezna trdnost Trpežne pokrovne plasti Dobra odpornost proti obrabi Primeren za srednje do težje transportne naloge

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.250 mm, skupna dolžina: 11.000 mm, skupna višina: 2.550 mm, Autoclave for Tyre Retreading SCHOLZ Year of manufacture: 2011, in good condition, dismantled and stored Heating type: Steam (steam generator not included) Length: approx. 11,000 mm Width: approx. 2,250 mm Height: approx. 2,550 mm Total weight: approx. 7,000 kg Internal diameter: 1,650 mm Isdpfxetph H Sj Abxsic Cylindrical length: 9,500 mm Usable length: 24 tyres

Stanje: zelo dobro (rabljeno), Steady rest made of steel Centre height: 650 mm Clamping diameter: 650 mm Height from base: 1190 mm Iisdpfx Aegzhbzebxsc Total height and centre height can optionally be reduced by 100 mm each by removing an intermediate plate For further details, see pictures

Stanje: rabljeno, Further technical data available on request Ride-on Scrubber Dryer KKI ASSM 650 with automatic drive and disc brushes Demo special price EUR 6,899 Product Information KKI 650 Ride-on Scrubber Dryer - Ride-on scrubber dryer Very compact ride-on scrubber dryer with a 65 cm working width and an extremely small turning radius for cleaning in confined spaces - Extremely maneuverable – on-the-spot turning - Multiple small disc brushes with increased contact pressure Description: - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact size provides this model with the necessary agility to operate effectively in tight spaces, allowing for easy navigation around obstacles - Control panel with operating elements - Manual operation of brush, squeegee, and water flow via levers - Tiltable dirty water tank for easier cleaning - Multiple small disc brushes with directly mounted squeegee enable a short design and a very small turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the squeegee upon accidental collisions to prevent damage Features: - Drive motor - Central, curved squeegee - 2-tank system - Hour meter - Fresh water tank with quick-fill hose - Automatic speed regulation - Automatic water and brush stop - Battery charge indicator Scope of delivery: - 4 disc brushes - Battery - Charger - Cleaning area: 3,000 sqm - Working capacity: 3,250 sqm/h - Brush working width: 650 mm - Suction width: 750 mm - Speed: 5 km/h - Brush diameter: 4 x 180 mm - Brush pressure: 22 kg - Brush speed: 190 rpm - Fresh water tank: 65 l - Dirty water tank: 65 l Iisdpol Iir Iofx Abxsc - Power supply: 24 V battery - Total power: 1,650 W - Rated voltage: 24 V - Length: 1,150 mm - Width/Depth: 780 mm - Height: 1,425 mm - Weight (net): 220 kg

Stanje: rabljeno, Krauss Maffei main board Isdpfx Aou Axihobxoic

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Komplet vsebuje vijačni kompresor LUFT 700 in hladilni sušilnik zraka N10S. Vijačni kompresor poljske znamke CORMAK serije LUFT je najsodobnejša rešitev, ki se uporablja v pnevmatiki v kombinaciji z uporabo visokokakovostnih materialov in komponent. Nizki obratovalni stroški, enostavna uporaba, ergonomska in trdna zasnova ter velika zmogljivost naprave zagotavljajo učinkovito in nemoteno delo. Iiedpfxsrh E Dio Abxjc Tehnične specifikacije LUFT 700 COMPACT Kompresor Moč motorja: 5,5 kW Sušilnik Moč motorja: 0,29 kW Splošni podatki Zmogljivost pri 0-6 bar: 690 l/min Zmogljivost pri 6 bar: 650 l/min Zmogljivost pri 8 bar: 650 l/min Zmogljivost pri 10 bar: 630 l/min Izhod: G3/4" Skupne dimenzije: 1250 x 600 x 895 mm Teža: 380 kg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 Iijdpfxew U N Ixe Abxoc • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Žaga za kosti Berkel / Mado MKB 650 16A, 380V. Pregledano v delavnici, napake odpravljene. Motorna zavora. Novo žagin trak Leto izdelave: 2002 Ogled in preizkus možna po telefonskem dogovoru! Plačilo z gotovino ali predplačilo! Iijdjy Du T Tjpfx Abxoc Prodaja samo podjetjem. Brez garancije, brez jamstva za napake.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.300 mm, pomik osi Y: 650 mm, pomik po osi Z: 625 mm, hitro pomikanje X-os: 24.000 m/min, hitri pomik os Y: 24.000 m/min, hitri pomik na osi Z: 20.000 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: Series 21i-MB, obremenitev mize: 1.000 kg, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: - Length: 4,110 mm - Width: 3,190 mm - Height: 3,100 mm Spindle - Taper: ISO 40 - Spindle speed: 8,000 rpm - Spindle motor power (continuous/30 min): 11/15 kW Working Capacity - X axis: 1,300 mm - Y axis: 650 mm - Z axis: 625 mm Iedpfx Aoxxlifjbxsic - Spindle center to table surface: 75 / 775 mm - Spindle nose to table center: 150 / 775 mm Table - Table size: 1,400 x 650 mm - Table load capacity: 1,000 kg Feed Rates - Rapid traverse X/Y axes: 24,000 mm/min - Rapid traverse Z axis: 20,000 mm/min - Linear interpolation max. feed X/Y/Z: 8,000 mm/min Tool Changer - Tool taper: DIN 69871-A40 - Shank: DIN 69872-A40 - Tool magazine capacity: 30 stations - Max. adjacent tool diameter: Ø 90 mm - Max. alternating tool diameter: Ø 150 mm - Max. tool length: 300 mm - Max. tool weight: 8 kg Other Features - Manuals, Electrical diagrams, CE Declaration, - Chip conveyor, Coolant tank (300 L) - High-pressure coolant system via spindle line (20 bar) - Transformer MACHINE OVERHAULS CARRIED OUT: - New Y-axis ballscrew, including bearing replacement - Overhauled X-axis ballscrew, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with replacement of belts, seals, and bearings - Full replacement of the X and Y axis lubrication circuit - Complete internal repainting and replacement of Lexan - Complete overhaul of the X/Y/Z axes telescopic covers

Stanje: rabljeno, Manual folding machine KRAMER Type AMS 650 x 1.5 Manual folding machine, bending bench Iiedpfxjdzqaas Abxec Year of manufacture: approx. 1985 Working length: 650 mm Sheet thickness at 40 kg/mm²: 1.5 mm Upper beam opening: approx. 60 mm Folding beam adjustment: approx. 0–25 mm Bending angle: 0–180° - Upper beam adjustment via hand crank - Clamping rail for the folding beam - One-piece sharp rail 135° Space requirement (L x W x H): 1200 x 600 x 1100 mm Weight: 160 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 0-261-04-6588, Funkcionalnost: popolnoma funkcionalen, moč: 21 kW (28,55 KM), višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, skupna dolžina: 6.060 mm, skupna masa: 2.600 kg, The machine has the following configuration: Emulsion spray at infeed and outfeed Edge preheating Pre-milling unit: Tool diameter: 100 mm, tool height: 63 mm, diamond tool with interchangeable knives, motorized distance adjustment Glue application unit: Glue and hot air application, heated applicator roller, quick change of the entire unit, automatic positioning via motor, 3 pressure rollers, edge feed speed: 14 m/min Cut-off unit: Twin-motor unit with automatic tilting up to 15°, THK prism guides Radius milling unit: 2 tools, automatic adjustment in two axes, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL SPECIFICATIONS Workpiece thickness: 8–60 mm Feed speed max.: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h Isdpeyu If Nsfx Abxoic EQUIPMENT Double upper pressure for part stability Electronic thickness control Frequency inverter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control panel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Fully automatic flow wrapping machine for packaging products – regardless of their length – with complete wrapping and without film overlap. Product feeding is carried out via a conveyor belt while simultaneously enclosing the product in a center-folded film using a forming shoulder. Product indexing is achieved through a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is carried out by a continuous side sealing unit. The height position of the forming shoulder and sealing units can be manually adjusted. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Technical data: Cross sealing bar: 450 mm Film: center-folded film, approx. 12–80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 120 mm Min. product width: 80 mm Pass-through height: 200 mm Working height: 780–930 mm Power supply: 400 V three-phase, 50 Hz, with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Isdpfew U A Eqox Abxeic Tunnel pass-through width: 650 mm Tunnel pass-through height: 200 mm Inspection and demonstrations can be arranged by appointment at our premises. Functional guarantee, no warranty.

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Iedpfxew Hwths Abxoic

Stanje: rabljeno, Leto izdelave: 2012, Control: POWER CONTROL PC 20+ Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid edge thickness (mm): 12 Feed speed (m/min): 20 Upper motor-driven rubberized belt Ijdpfxjwwk Due Abxjic Manual infeed guide Anti-adhesive unit Straightening unit Bonding with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset end trimming and corner rounding unit with two motors Linear 2-motor rounding unit Edge scraper blade Glue scraper blade Buffing unit

Stanje: rabljeno, Leto izdelave: 2007, Technical Details: Machine weight approx.: 3 t Measuring range X: 650 mm Measuring range Y: 1200 mm Iodsvap Skepfx Abxeic Workpiece weight: 700 kg Travel speed: 200 mm/s Power consumption: 1000 VA Design: Gantry measuring center with fixed measuring table and side-driven gantry; measuring table, crossbeam, and quill all made of granite. All axes are equipped with high-precision air bearing guides. The drive is provided by DC servo motors. Control: 3-5 axis microcontroller with vectorial path control Measuring system: Incremental length measuring system, resolution 0.5 µm Computer: Industrial PC, Pentium class, operating system Windows 2000, multilingual Software: MarSoft Vision 3D-Multisensor 3D measuring software

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 670 mm, pomik po osi Z: 625 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 1.270 mm, dolžina pomika po osi Y: 670 mm, dolžina podajanja os Z: 625 mm, nazivna (navidezna) moč: 37 kVA, proizvajalec krmilnikov: Fanuc, model krmilnika: i Series, teža obdelovanca (maks.): 1.000 kg, skupna višina: 2.815 mm, skupna dolžina: 3.350 mm, skupna širina: 3.760 mm, širina mize: 650 mm, dolžina mize: 1.300 mm, obremenitev mize: 1.000 kg, skupna masa: 8.500 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, nos vretena: BT40, število vreten: 1, število mest v zalogovniku orodij: 30, dolžina orodja: 300 mm, premer orodja: 125 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Doosan DNM 650 Vertikalni obdelovalni center – 2011 Krmilje Fanuc i-Series | 12.000 obr/min | Priprava za 4. os 2011 Doosan DNM 650 vertikalni obdelovalni center s krmiljem Fanuc i-Series. Vreteno BT40 s 12.000 obr/min, obnovljeno vreteno, priprava za 4. os, 30-pozicijski menjalnik orodij (ATC), notranje hlajenje skozi vreteno (TSC), hladilnik ter transporter ostružkov. Na voljo pri Used Machine Tools Ireland. Proizvajalec: Doosan Model: DNM 650 Tip stroja: 3-osni vertikalni obdelovalni center s pripravo za 4. os Leto: 2011 Krmilje: Fanuc i-Series Stanje: Zelo dobro – vreteno obnovljeno leta 2026 Razpoložljivo: marec 2026 Ponujamo zelo cenjen in robusten Doosan DNM 650 iz leta 2011, idealen za natančno kooperantsko strojno obdelavo, orodjarstvo in proizvodna okolja. Stroj je opremljen s krmiljem Fanuc i-Series ter na novo obnovljenim vretenom, kar zagotavlja odlično zmogljivost, zanesljivost in dolgo življenjsko dobo. Stroj je pripravljen za 4. os z vmesnikom Nikken, kar omogoča nadgradnjo za rotacijsko ali večosno delo. Glavne tehnične značilnosti Proizvajalec: Doosan Model: DNM 650 Leto: 2011 Krmilje: Fanuc i-Series Hitrost vretena: 12.000 obr/min Stožec orodja: BT 40 Pomiki X / Y / Z: 1270 / 670 / 625 mm Velikost mize: 1300 × 650 mm Maks. nosilnost mize: 1.000 kg Hitri pomiki: X / Y: 36 m/min Z: 30 m/min Menjalnik orodij (ATC): 30 pozicij Največji premer orodja: Ø80 mm ob sosednjih orodjih / Ø125 mm brez Največja dolžina orodja: 300 mm Največja teža orodja: 8 kg Dimenzije stroja (pribl.): 2760 × 3350 × 2815 mm Teža stroja (pribl.): 8.500 kg Oprema in lastnosti Na novo obnovljeno vreteno Priprava za 4. os Nikken 30-pozicijski avtomatski menjalnik orodij (ATC) 20 bar notranje hlajenje skozi vreteno (TSC) Hladilnik za hladilno tekočino Transporter ostružkov LNS Možnost povezave s podatkovnim strežnikom / omrežjem Popolnoma zaprta robustna konstrukcija Opomba Iijdpfx Aboyfh Ixjxjc Držala orodij, primeži in zaboj za ostružke niso vključeni Idealno za: Natančno strojništvo CNC kooperantsko obdelavo Avtomobilske in letalske komponente Splošne in visokohitrostne rezkalne aplikacije Doosan DNM 650 je znan po izjemni stabilnosti, natančnosti in zanesljivosti, zaradi česar je eden najbolj priljubljenih vertikalnih obdelovalnih centrov v svojem razredu. Opombe: *Tehnične specifikacije so navedene v dobri veri, vendar niso zagotovljene*

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motorized decoiler Iiodpfx Aefn Aqlsbxoc

Stanje: novo, Leto izdelave: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC Turning/Milling Center with tailstock, driven tools, and real Y-axis travel of ± 70 mm, 35° slant bed, and linear roller guides. Available for viewing in showroom. Max. swing diameter: 600 mm Max. turning diameter: 320 mm Iiodeqa Dtfspfx Abxjc Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 driven Max. rotational speed: 4,000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options: 65, 75, and 91 mm) Spindle bore diameter: 66 mm Direct drive motor power: 22/30 kW Max. speed: 4,000 rpm Tailstock diameter: 110 mm / MK 3 Tailstock travel: 850 mm Dimensions (WxDxH): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard equipment: Coolant system 3-color warning light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Tools and tool box CE compliance Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Iiedpotunccefx Abxec Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production