Ntn Uc320 nakup rabljenega (156)

Stanje: novo, moč: 125 kW (169,95 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, barva: bela, število sedežev: 16, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Sprinter 515/517 Low-Entry Front M2 Permissible Gross Weight 5,000 kg / Capacity 19 passengers Optionally available as M3 with up to 6,400 kg / up to 30 passengers Interior conversion as follows: - Cash desk instead of passenger seat - Double-width electric passenger door with 1250 mm opening width - Manual wheelchair ramp - 13 city bus seats / sleeper seats optional (can be secured upon request) - Wheelchair / stroller space - 6 standing places (including 3 folding seats) in addition --> Total capacity 19 plus driver (additional standing places possible on request) - Passenger compartment air conditioning Webasto 12 kW plus MB 7 kW front A/C at driver’s workstation - Convector heating in passenger area (up to behind the last seat row), thermostatically controlled Gedpfx Aey Rhrioi Aeiu - Length 7,367 mm with original rear wing doors --> length of 7,500 mm or longer available on request - Double-glazing, VIP tinted, in original cut-out (optional panoramic glazing) - Optional extra-large windscreen with electric sunblind and destination display preparation - Eligible for subsidies in most federal states (please contact us for details) - Complies with §30d section 4 of the German Road Traffic Licensing Regulations (StVZO) Base vehicle, e.g. equipped as follows: Standard Mercedes-Benz equipment with 150 hp (optional 170 hp), including driver’s comfort seat (optional suspension seat), optional auxiliary heater, front air conditioning, MB radio, cruise control, 9-speed automatic transmission, optional parking package, ... GSR 3 systems included as standard: - Reversing camera - Blind spot assist - Turning assistant - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure monitoring system - Attention assist - Active lane keeping assist - Start information assistant - Intelligent speed assist - Distance assist - Rain sensor - Electric exterior mirrors This is a sample vehicle. It is not in stock. Delivery time is approximately 4 months. Base price without destination displays in the aforementioned configuration from EUR 104,990.00. Net export possible.

Stanje: novo, moč: 132 kW (179,47 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, barva: bela, število sedežev: 13, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Opel Movano (identical to Ducato / Jumper / Boxer) Front low-floor lead vehicle – base vehicles available - Acoustic and thermal insulation of the passenger compartment - Grey/black glazing in original cutout - 13 sleeper seats plus individual passenger seat (or tooth cabinet) + driver's seat - 2 folding seats (folding seats count as standing places) - 7 standing places / Total capacity 20/21 - Wheelchair space / stroller space in special use area - Convector heating in the passenger compartment - Auxiliary heater - Air conditioning in the passenger compartment - Multi-level night lighting white/orange - Roof hatch - Double-width passenger door with manual wheelchair ramp - Electric step at the original sliding door - Reinforced rear axle / Gross permissible weight 4,500 kg Base vehicle with air conditioning, manual transmission, PDC with reversing camera, auxiliary heater, radio with hands-free system, multifunction steering wheel, ... Wheelbase: 4,035 mm Overall length: 6,223 mm Height: 2,522 mm Width: 2,050 mm Optional: - Extra extra large windshield Gsdpfx Aozbqacsi Aoiu - Automatic transmission (then 130 kW engine) - Air heater Special equipment: Driver's/passenger airbag, Cool & Sound package, electrical interface for further conversions, driver assistance: parking system with reversing camera, lighting package 1, tyre repair kit, cab seats: individually adjustable passenger seat, cab seats: heated driver's seat Additional equipment: Exterior mirrors, single tires on 2nd/rear axle, driver assistance system: side wind assist, 185 A alternator, rear doors with windows (opening angle 180°), high roof H2, permissible total weight 4.5 t, body design: high-capacity van, body variant: vehicle length L4, body variant: high roof (H2), fuel tank: 80 liters, adjustable steering column (steering wheel), headlight range control, model update, engine 2.3 L – 121 kW CDTI, pollen filter, long wheelbase, low emissions Euro 6d-TEMP, sliding door right loading/passenger compartment, side marker lights, visibility pack, steel wheels 6.5x16, LED daytime running lights, permissible gross weight 4.5 t, speed limitation 90 km/h Net export possible All information given without guarantee German vehicles / no re-imports Order on request also possible for Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipment worldwide

Stanje: novo, Gantner ISM 112 Inteligentni senzorski modul SN: 085055, neuporabljen v odprti originalni embalaži, 100 % delujoč, dobava skladno s fotografijami. Godpoy Np Ucofx Ai Asiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Measuring machine with table and base frame Garant Ident N1 / HDI V1.35 Granite measuring plate 1200 x 800 x 125 mm (Neydorff) Maximum measuring height approx. 600 mm see photos collection only (EXW) Gedpov T Tbcefx Ai Asiu

Stanje: dober (rabljeno), Leto izdelave: 2015, Dvižna zmogljivost: 900 kg Naprava z zaščitno rešetko Širina: 3150 mm Višina: 2000 mm Globina: 550 mm Lastna teža: pribl. 200 kg Stanje: dobro, rabljeno Godpjy S R Icofx Ai Aeiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 2.600 mm, Geiger LR16 Handling v dobrem stanju naprodaj. Vključno z električno omaro. - Tip: LR16 EC Giedpfxexba Dcs Ai Aeu - Različica: V221 - Leto izdelave: 2009 - Serijska št.: 1724580904245 - Pomik v osi X: 500 mm - Pomik v osi Y: 1000 mm - Pomik v osi Z: 2600 mm Pošiljanje oziroma dostava možna po dogovoru. Za dodatna vprašanja smo na voljo kadarkoli.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 855 mm, skupna širina: 880 mm, skupna dolžina: 2.120 mm, transportna dolžina: 2.120 mm, razmak osovin: 125 mm, višina okvirja: 80 mm, vrsta pogona: Schwerkraft, Pallet Removal Unit / Pallet Roller Conveyor / Roller Conveyor Manufacturer: BITO Condition: Used Model/Type: Roller Total length: approx. 2120 mm Total width: approx. 880 mm Conveyor/roller width: approx. 855 mm Roller diameter: approx. 60 mm Axle spacing: approx. 125/145 mm Frame: Steel / galvanized Frame height: approx. 80 mm Includes one brake roller per unit (diameter: approx. 80 mm) Stock: 22 units Price per unit Feet must be ordered separately Gisdpfxjuh Tlrs Ai Aeu Features: Condition: fully functional with signs of wear Ideal for rapid material transport Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst, Germany) The conveying equipment was in operation until dismantling. Thanks to the excellent build quality, your materials will glide smoothly to their destination—even under heavy loads. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom quote or advise you regarding system design or installation questions. Simply let us know your requirements and onsite conditions. Benefit from our many years of experience and excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, and electronics. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable way. We can also supply fully automated sorting technology or supplementary components such as picking racks or containers.

Stanje: rabljeno, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture approx. 1997, machine overhauled in 2020 Travels: X: 600 mm, Y: 350 mm, Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (drawbar DIN 69872 A) Spindle speed: 20–5000 rpm Max. spindle torque: 150 Nm Max. spindle nose to table distance: 660 mm Feed rate X, Y, and Z: 0 – 5000 mm/min, stepless Rapid traverse X, Y, and Z: 15,000 mm/min Tool change time: approx. 5 sec Chip-to-chip tool change time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Thread cutting capacity in St 60: M24 Spindle motor power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control: Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing attachment on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Rotation speed approx. 25 rpm, transmission ratio 1:180 Gjdpfx Aju Tln Nei Ajiu - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Max. bending diameter: 30 mm, on-site inspection is possible. Giodpforc Hiiex Ai Aou

Stanje: rabljeno, Proximity switch, proximity sensor, position switch - Manufacturer: Pepperl+Fuchs, inductive proximity switch - Model: Varikont NJ15 + 27819S - Voltage: U=10-60VDC Gijdpfx Aijh Rf Iys Aju - Quantity: 7 switches available - Price: per unit - Dimensions: 140/40/H40 mm - Weight: 0.3 kg/unit

Stanje: rabljeno, Used membrane filter press Anlage Type: Passavant Noggerath Application: Sludge dewatering Design: Side bar Filter plate size: 1200x1200 mm Number of plates: 100 pieces / membrane mix Gijdpfx Aowy H Nrei Asu Filter plates: PP (polypropylene) Filter cloths: optionally available, tailored to the specific medium Press volume: approx. 2900 dm³ Filtration pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the equipment possible by arrangement at our site.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 6.875 h, številka stroja/vozila: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal cylindrical grinding machine – Year of manufacture: 2020 A used EMAG WEISS W11 CNC SL650 is available for sale – a powerful universal cylindrical grinding machine with CNC control. The machine is ideal for demanding grinding tasks on individual parts, prototypes, and small to medium series. Machine specifications: Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of manufacture: 2020 Operating hours: approx. 6,850 spindle hours / approx. 20,422 switching hours Condition: Used, well maintained, ready for immediate use Technical data: Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on version) Max. grinding length: 650 mm (between centers) Center height: approx. 200 mm External grinding diameter: up to approx. 390 mm Max. workpiece weight (overhung): approx. 100 kg (MK4) Max. workpiece weight between centers: approx. 250 kg X-axis travel: approx. 380 mm Z-axis travel: approx. 1,150 mm Gsdpfx Aezcfgmji Aeiu Grinding wheel diameter: 400 – 500 mm depending on configuration Rated power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral speed: 20 – 50 m/s Features and performance: - Windows-based CNC touchscreen operation – convenient programming via dialogue or DIN/ISO (optional) - Two-in-one concept: machine can be operated conventionally and with CNC control - High-precision linear and ball screw guides for maximum accuracy - Direct measuring system (glass scales) (optional for many machines) - Automatic dressing of the grinding wheel with compensation - Crash-control & GAP monitoring for machine and process safety - Coolant system, emulsion separator and chip conveyor included (depending on equipment) - Preparation for automation / robot interface possible The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical details and information!

Leto izdelave: 2024, obratovalne ure: 100 h, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 500 kg, vhodna napetost: 230 V, obratovalni tlak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, številka stroja/vozila: 2K.MA.WPE.241, Used 2-component mixing and dosing system Mur.Tech KMD-3000 V1 (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material delivery thanks to eccentric screw pump. Prior to delivery, as the original manufacturer, we carry out a complete factory refurbishment of all material-contacting components: pump, material containers, mixing head, hoses, and valves are rebuilt or renewed. The wear condition of all media-carrying parts thus corresponds to a new system. The frame and sheet metal parts show signs of use consistent with previous operation. Highlights: - Factory refurbishment of all media-contacting components before delivery - Modular design: entire delivery chain from pump head to mixing gun can be exchanged without tools (clamp technology) - Material change in minutes – minimal material loss - Stator can be replaced with only 3 screws – service possible without production downtime - Mixing tube can be changed tool-free in seconds - Lightweight, ergonomic mixing head made of carbon/aluminium/GRP - Swivel arm for fatigue-free operation - Mobile thanks to wheeled chassis Technical data: Giodjzabnzjpfx Ai Asu Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year: 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, continuously adjustable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: static or dynamic possible Operation: gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement throughout the entire material path - Clogging detection - Flow measurement and bubble detection Discharge modes: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on images: The pictures show the system in its current state before factory refurbishment. The material-contacting components will be renewed before delivery. Fields of application: adhesive dosing, electronic potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, circuit diagrams. Commissioning and training optional. From manufacturer: spare parts supply and service by the original team. Sale as seen, with exclusion of any warranty. Price: on request Location: 8811 Scheifling Viewing on site possible by appointment.

Stanje: zelo dobro (rabljeno), Weishaupt RGMS 40 dvokomponentni gorilnik plin + težko olje. 2700 kW Gedpfx Aemnqbtji Aoiu

Stanje: rabljeno, Leto izdelave: 1994, Maks. prehodna višina: 160 mm Giedpfsy Naq Ujx Ai Aou Dolžina brusnega traku 1. agregata: 1900 mm Maks. delovna širina: 1350 mm Število trakov: 2 trakova 1. agregat: kalibrirni valj, utorjen, gumijasta izvedba 1. agregat: utorjeno jeklo Širina brusnega traku 1. agregata: 1350 mm 2. agregat: kombinirani brusni agregat Izvedba 2. agregata: valj/čevelj Upravljanje: ročna upravljalna plošča El./pnevm. oscilacija traku: pnevmatska Vstopna višina: fiksna (zgornji del se pomika) Dvig mize: elektromotorski Prikaz mize: mehanski številčni prikaz Delovna višina oziroma višina podajalne mize: 900 mm Skladišče: Nattheim

Leto izdelave: 2007, stanje: rabljeno, številka stroja/vozila: IntNr231611, NILES-SIMMONS N30/3-3500 CNC lathe, year of manufacture 2007 High-precision double-sided heavy-duty machining 2 spindles, 2 turrets Technical details & performance data Gsdpfjza D E Nex Ai Aoiu Control: Siemens Sinumerik Si 840D Max. turning length (nominal length): 3,500 mm Swing diameter over bed: approx. 780 mm Swing diameter over cross slide: approx. 720 / 750 mm 1st and 2nd spindle: Max. spindle speed: up to 3,000 rpm (stepless) Drive power (S1-100% / S4-40%): approx. 64 kW / 78 kW Max. torque: up to 3,135 Nm Tool system: Tool holder / turret: 12-position / 16-position turret (VDI 50 / 60 or axial/radial) Travel ranges & dynamics: X-axis: -12 to +423 mm Rapid traverse speeds (X / Z): 18 / 30 m/min 2 x NC-controlled steady rest slides for optimal support High-performance hinged belt chip conveyor with coolant system Documentation, electrical diagrams, and CE certificate included The machine can be inspected under power by prior appointment. Technical specifications and details subject to change or error. Machine subject to prior sale!

Stanje: novo, Navorni motor kot prikazano zgoraj, stanje izdelka novo, originalno zapakirano Gisdpfx Aiszcgtze Aeu Proizvajalec: Siemens Serija: SIMOTICS T Tip izdelka: Navorni motor Tip: 1FW6090-0PB15-1JC2 Dodatna oznaka: YFED6 133380 05 003 Tip motorja: Trajno vzbujen sinhronski navorni motor Področje uporabe: Neposreden pogon za industrijske aplikacije in obdelovalne stroje Stanje: Novo

Leto izdelave: 2026, obratovalne ure: 5 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 500 kg, vhodna napetost: 230 V, obratovalni tlak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, številka stroja/vozila: 2K.MA.WPE.261, As-new 2-component mixing and dosing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), direct from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material conveyance thanks to eccentric screw pumps. This V2 version additionally features vessel heating (30–150 °C per container) and vacuum degassing of materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: entire feed path from pump head to mixing gun can be exchanged without tools (clamp technology) - Material tempering throughout the complete feed path - Material change in just minutes – virtually no material loss - Stator replacement with only 3 screws – service without production interruption - Pinch valve and mixer tube can be exchanged in seconds tool-free - Lightweight mixing head made of carbon/aluminium/GRP – ergonomic - Swivel arm for fatigue-free handling (robot interface retrofittable) - Mobile thanks to chassis with castors Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100 infinitely adjustable Selectable stator materials: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, pressure/vacuum-resistant, with electric inclined-blade agitator Container heating: heating sleeve per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers switchable (individually with full power or simultaneously at half power) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the vessels - Temperature measurement along entire feed path - Level monitoring of the containers - Blockage detection - Pinch valve status monitoring - Flow measurement and bubble detection Discharge modes: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air minimum 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and storing of potting data in the Mur.Tech Cloud available on request. Long-term analysis supports efficiency improvements and early detection of maintenance intervals. Integration into company network possible via wireless or wired connection. Applications: adhesive dosing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: system, user manual, circuit diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by original team. Sale as inspected, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment. Giedpfey Txfxjx Ai Asu

Stanje: novo, Proizvajalec: Siemens Serija: SIMOTICS T Tip: navorni motor Model: 1FW6090-0PB15-1JC2 Serijska številka: YFED6 133380 02 002 Gjdpfx Aijzcgt Ue Aeiu Tip motorja: trifazni sinhronski motor Hlajenje: zunanji hladilni plašč Izvod kabla: aksialni Premer: 230 mm Dolžina: 190 mm Maks. navor: 537 Nm Maks. hitrost: 150 vrt/min Maks. tok: 26 A eff Teža: 27,2 kg Razpoložljiva količina: 2 kosa

Stanje: novo, Proizvajalec: Siemens Serija: SIMOTICS T Tip: navorni motor Model: 1FW6090-0PB15-1JC2 Tip motorja: trifazni sinhronski motor Hlajenje: zunanji hladilni plašč Izhod kabla: aksialen Premer: 230 mm Dolžina: 190 mm Največji navor: 537 Nm Največje število vrtljajev: 150 vrt/min Največji tok: 26 A Giodozcgt Ispfx Ai Asu Količina: 2 kosa

Stanje: rabljeno, Leto izdelave: 2023, številka stroja/vozila: IntNr231583, CNC-Kurzdrehautomat – Citizen Miyano BNE-65 MYY Zustand: Sehr gut, betriebsbereit Verfügbarkeit: Kurzfristig Technische Kurzbeschreibung Fabrikat: Miyano Typ: BNE 65 MYY Baujahr: 2023 Steuerung: Mitsubishi M800 Ausstattung: Haupt- und Gegenspindel 2-Y-Achse (Y1 & Y2) Angetriebene Werkzeuge Mehrkanalsteuerung Späneförderer Stangenlader-Schnittstelle Verfahrwege: X-Achse: ca. 260 mm Y-Achse: ca. ±50 mm Z-Achse: ca. 800 mm Drehzahlen & Leistungen: Hauptspindel: bis ca. 5.000 U/min, ca. 15–18 kW Gsdpfozaktmex Ai Aeiu Gegenspindel: bis ca. 5.000 U/min, ca. 11–15 kW Angetriebene Werkzeuge: bis ca. 6.000 U/min, ca. 3–5 kW Die Maschine ist mechanisch und elektrisch voll funktionsfähig. Die vollständige technische Dokumentation liegt vor. Eine Besichtigung unter Strom ist nach Terminvereinbarung möglich. Zwischenverkauf, Irrtümer und Änderungen der technischen Angaben vorbehalten!

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: IntNr230445, Used CNC Swiss-type lathe Citizen L520-VII, year 2003 Control: Cincom Mitsubishi Meldas 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Main spindle: - Max. speed: 10,000 rpm - C-axis: 0.001° Sub spindle: Gisdey U Hlcopfx Ai Aou - Max. speed: 10,000 rpm - C-axis: 0.001° Tool capacity for up to 18 tools (includes linear tool holders, front attachment, and backworking stations) Parts conveyor belt Integrated fire extinguishing system Chip conveyor Loading magazine: IEMCA BOSS 432r The machine can be inspected under power by appointment. Technical specifications are subject to change and errors. Prior sale reserved.

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travels & Axes X-axis (longitudinal): 2,200 mm Y-axis (cross): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping area: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 – 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 to DIN 69871 Tool Changer Number of magazine positions: 30-fold magazine Tool change time (chip-to-chip): approx. 4–6 seconds (model dependent) Dimensions & Weight Required floor space approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by prior appointment. Specifications and details may be subject to change and errors; prior sale reserved! Gjdpfx Ajy U Hklei Asiu Refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: Travel X: 2,500 mm. Travel Y: 920 mm. Travel Z: 820 mm. B-axis: x/- 105° Work table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer: 30 positions Equipped with: – Chip conveyor – Through-spindle coolant, 40 bar – Operating instructions Country of origin: Germany Motor power: 35 kW Machine dimensions LxWxH: 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Specifications and details subject to change and error, as well as prior sale!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 43.000 h, številka stroja/vozila: IntNr231372, STAR SA 16-12 CNC lange draaislijpmachine, bouwjaar 2000 CNC-besturing: FANUC 18i-T Bedrijfsuren: 43.000 Technische gegevens - Aantal assen: 5 - Aantal spindels: 2 HOOFDSPINDEL - Max. stafdiameter: 12 mm - Z-as verplaatsing: 140 mm - Spilsnelheid: 8.000 tpm - Spindelaandrijfvermogen: 2,2 kW - Aantal gereedschapsposities: 13 TEGENSPINDEL - Max. stafdiameter: 10 mm - Spilsnelheid: 8.000 tpm - Aantal gereedschapsposities: 4 Gijdpfx Aoy U Hizoi Asu FMB Minimag stangenaanvoermagazijn De machine kan na afspraak onder stroom worden bezichtigd. Wijzigingen, vergissingen in technische gegevens en specificaties, alsmede tussentijdse verkoop voorbehouden!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 44.000 h, številka stroja/vozila: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar feeder High pressure unit, 40 bar The machine can be inspected under power by prior arrangement. Technical data and specifications are subject to change, errors, and prior sale. Gjdpfxey U Hiue Ai Aeiu