Multicar M30 6X4 Eev Saugwagen Mit Spüleinrichtung nakup rabljenega (10.507)

Stanje: rabljeno, prevoženi kilometri: 252.560 km, moč: 310 kW (421,48 KM), prva registracija: 06/2018, vrsta goriva: dizel, lastna masa: 15.150 kg, največja dovoljena obremenitev: 10.850 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x4, medosna razdalja: 4.500 mm, naslednji pregled (TÜV): 03/2025, zavore: zaviranje z motorjem, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 2, dolžina tovornega prostora: 6.510 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 950 mm, Oprema: ABS, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, zapora diferenciala, žerjav, Vehicle location: Bovenden. Features: ClassicSpace cab, Mercedes PowerShift 3, installation/home location, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left/right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off (PTO), differential lock, work lights, leaf suspension, trailer coupling (air+electric), aluminum fuel tank, lashing eyes, underrun protection, side aluminum underride guard, swing flaps, roof hatch, rear-mounted crane, emergency stop, grapple control, elevated seat, 2-point hydraulic support, 2x hydraulic extensions, environmental sticker (green). Wheelbase: 4500 mm. Body: flatbed with aluminum side walls & Atlas AK 186.3 V-2 rear crane with elevated seat. 8 t front axle, rear axle bevel gear set 233 planetary, 13.4 t. Electronic brake system with ABS and ASR, disc brakes with partial protection on front and rear axle, condensation monitoring for compressed air system, aluminum front underrun protection, stabilizer front and rear axle, smoker package, residual heat utilization, construction site filter, additional thermal insulation, PSM, reversing alarm, ClassicSpace, comfort locking system, drive program Power, Mercedes PowerShift 3, pre-installation for toll recording, LED daytime running lights, high-performance engine brake, transmission oil cooling, ESP, lane keeping assist, attention assist, refrigerator, MB 131-2c PTO pump. Ledpfovhnypsx Al Nerk Load diagram: 5.9 m – 3200 kg, 8.5 m – 2120 kg, 11.2 m – 1600 kg! Pallet fork available at extra cost: €2,900.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted.

Stanje: rabljeno, prevoženi kilometri: 253.000 km, moč: 257 kW (349,42 KM), prva registracija: 07/2005, vrsta goriva: dizel, lastna masa: 13.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315 / 80 R 22,5, konfiguracija osi: 6x4, medosna razdalja: 3.600 mm, zavore: stalna plinska ročica, barva: rumena, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 3, vzmetenje: jeklo, število sedežev: 2, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, kabina, nizka raven hrupa, tempomat, zapora diferenciala, Vehicle location: Belgium 1, steel body, design: house, 1x air suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, radio, cruise control, 16-speed manual gearbox, ABS (anti-lock braking system), constant throttle, exhaust routed upwards, differential lock, rotating beacon, leaf suspension, Bordmatik on left side, low-noise G1, grain outlet, flap, portal doors, yellow environmental sticker. Wheelbase: 3600 mm. Body: Meiller three-way tipper with Bordmatik, towbar pre-installed, combination tailgate with double grain chute, Bordmatik on left, fixed side wall on right, approx. EUR 2,000 invested in maintenance! Location: Ronny Schoutteet, Brugsesteenweg 213, B-8460 Oudenburg, Belgium, tel. no.: ! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Lredpfx Aovhhkusl Nsk

Stanje: rabljeno, prevoženi kilometri: 197.730 km, moč: 265 kW (360,30 KM), prva registracija: 02/1993, vrsta goriva: dizel, skupna masa: 27.500 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x4, medosna razdalja: 3.850 mm, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 2.500 mm, skupna širina: 3.900 mm, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 350 mm, Oprema: dodatne luči, kabelska vitla, kabina, meglenke, servovolan, spojka prikolice, zapora diferenciala, žerjav, Vehicle location: Bovenden, with tool house, 1x comfort seat, double passenger bench, rear window, 16-speed gearbox, constant throttle, PTO (power take-off), front exhaust, tachograph, central lubrication system, differential lock, fog lights, work lights, rotating beacon, storage box, leaf suspension, trailer coupling (air + electrics), alloy wheels, underrun protection, folding aluminum sidewalls, detachable side panels, roof hatch, rear-mounted crane, elevated operator station, 4-point hydraulic outriggers, 5x hydraulic extensions, jib, winch. Wheelbase: 3850 mm. Body: Flatbed with crane Palfinger PK 68000 TAKA V42.3, aluminum folding sidewalls, 13t rear axles, central lubrication system, reinforced rear suspension (stage 1), PTO gearbox lock, engine speed governor for PTO, double wooden floor with storage space, MB 1b intermediate shaft PTO. Load diagram: 9.1m–2670kg, 12.6m–1830kg, 16.1m–1400kg, 19.7m–900kg, 23.2m–570kg, 26.7m–390kg! with winch. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Lrodpfovhhqhsx Al Njk

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Ledpfsx A Nn Tex Al Njrk Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W Lredpex A Npdofx Al Nek 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double-axle single reduction, hypoid type. Differential locks longitudinal and crosswise. Max. front axle load: 10.0 t (technical) Max. rear axle load: 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank right side Usable AdBlue tank capacity: 64 liters Rockinger 50 trailer coupling for drawbars with 50 mm diameter Electrical trailer connection, 15-pin Euro 6, Stage E - onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors both sides, ramp mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight leveling Daytime running lights LED, "V-light" Front LED fog lights Static LED cornering light Two LED revolving beacons (orange), mounted at front of cab roof Cable ducts on both sides of cab roof. Wiring for roof-mounted headlights, up to 280 W 2 compressed air horns on the roof, controllable from the steering wheel. Roof antenna and CB radio preparation Front roof bar for accessories Emblems/type designations factory mounted. Emission type plate (Euro...) L-plate (low-noise vehicles -96) Body configuration in steel/welded construction, fixed mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, brand Suer, height 600 mm, anodized finish each side (R and L) Removable aluminum sideboards, brand Suer, height 600 mm, anodized finish each side (R and L) Recessed lashing rings 2500 daN and 6500 daN each side, in perforated rail with flexible arrangement 6 stake pockets for stanchions (3 per side) Hydraulic extension of the platform to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and collision protection, recessed as low as possible, operable by remote control Sturdy front wall consisting of welded frame with recessed stanchion depot pockets Cladding plates, fenders made of tread plate, sandblasted and powder coated, painted in vehicle color. Lredpfxjx A Nnts Al Nok Toolboxes between rear axles fitted with tread plate. 5 toolboxes, natural tread plate finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on the wheelbase or available space. Sandblasted and powder coated, painted in vehicle color. Mounting of rear underrun protection and additional outrigger, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding sheave and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome plated Double knuckle boom system with PROLINK (overbending jib up to 15°) Electronic overload shutdown device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shut-off and optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied piped Separate hydraulic tank (180 l) with filter

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. Ljdpfx Aeyq Rdyjl Nerk The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please send inquiries or offers by email only, not by phone.

Stanje: rabljeno, prevoženi kilometri: 115.556 km, moč: 107 kW (145,48 KM), prva registracija: 07/2014, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: oranžna, naslednji pregled (TÜV): 06/2026, vrsta prenosa: mehanski, emisijski razred: Euro 5, širina tovornega prostora: 1.500 mm, dolžina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2014, število sedežev: 5, Oprema: ABS, parkirni grelec, pogon na vsa štiri kolesa, * Nemško vozilo iz občinske lasti, 1. lastnik * Zelo dobro stanje, servisna zgodovina popolnoma izpolnjena * Priklopljiv 4x4 pogon na vsa kolesa * 5-stopenjski ročni menjalnik * Webasto parkirno ogrevanje * Diferencialna zapora * Polžji prenos * 5 sedežev * Rotacijska luč Lrodpfx Alsyy Tu Is Nok * Balonske pnevmatike 315/55 R16, 70-80 % * Kroglična vlečna kljuka, 3.500 kg vlečne zmogljivosti * Nosilnost 2.355 kg * WhatsApp: * Kontakt v poljščini: * Prodaja samo podjetjem, brez garancije, vse informacije brez jamstva, pridržana vmesna prodaja

Stanje: rabljeno, prevoženi kilometri: 71.886 km, moč: 90 kW (122,37 KM), prva registracija: 08/2013, skupna masa: 5.600 kg, vrsta goriva: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2013, skupna dolžina: 5.165 mm, skupna širina: 1.710 mm, skupna višina: 2.210 mm, število sedežev: 2, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, Multicar M30 FUMO Carrier H FH1 Hydrostatic 4x4 Long Wheelbase 3.0l Diesel Engine 90KW/122HP Euro 5 with Ball Hitch System and Large Municipal Hydraulic System in Municipal Orange RAL 2011 ---- First registration: 23.08.2013 Mileage: 71,886 km Hydraulic operating hours: 3,446 hrs Previous owner: Municipal vehicle, single owner ---- * Iveco engine 3.0 90KW/122HP EURO 5 with DPF * Permissible gross weight 5,600 KG * Standard cab * Air conditioning * KWS ball hitch system * Preparation for two towing hitches: ball and jaw coupling – Towing capacity 3,500 KG * Switchable all-wheel drive with mechanical differential lock and low range Lredpfx Aleyk N Ecs Nok * Large municipal hydraulic system with all available additional options * Equipment control panel wiring kit with power supply * Yellow rotating beacon * Heated and electrically adjustable exterior mirrors * Additional mirrors, left and right * Lighting carrier and auxiliary headlights * Radio with CD player * Adjustable air-suspended driver’s seat ISRI * Front mounting plate for attachments, quick-change device SWV 500 * Wide-profile winter tires 285/65R16 Goodyear Winter service equipment: * New professional snow plow for municipal use, 2.00 m width * Alternatively with Fiedler V-snow plow FKP1710 * Stainless steel gritter body Schmidt Stratos B11-18 VAX with control unit ---- Immediately drivable and operational vehicle from first owner, good condition! Technical inspection/emissions test new ---- Your contact for this vehicle: Daniel Seidler Tel: Mobile: also WhatsApp Email: ----Errors and changes excepted!

Stanje: rabljeno, prevoženi kilometri: 170.543 km, moč: 110 kW (149,56 KM), prva registracija: 06/2013, vrsta goriva: dizel, lastna masa: 3.650 kg, največja dovoljena obremenitev: 3.850 kg, skupna masa: 7.500 kg, konfiguracija osi: 4x2, medosna razdalja: 3.400 mm, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 6.250 mm, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, spojka prikolice, zapora diferenciala, Meiller kiper, neobvezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja brez kakršnega koli jamstva – vsi podatki brez jamstva! Lodpfx Aox Tpp Iol Nork

Stanje: rabljeno, prevoženi kilometri: 74.178 km, moč: 90 kW (122,37 KM), prva registracija: 08/2013, skupna masa: 5.600 kg, vrsta goriva: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2013, skupna dolžina: 5.165 mm, skupna širina: 1.710 mm, skupna višina: 2.210 mm, število sedežev: 2, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, Multicar M30 FUMO Carrier H FH1 Hydrostat 4x4 Long Wheelbase 3.0l Diesel Engine 90kW/122HP Euro 5 with Quick-Change Ball System and Large Municipal Hydraulic System in Municipal Orange RAL 2011 ---- First Registration: 23.08.2013 Mileage: 74,178 km Operating Hours Vehicle: 6,841 h Operating Hours Hydraulic System: 4,550 h Previous Owner: Municipal Vehicle, First Owner ---- * Iveco engine 3.0l 90kW/122HP EURO 5 with DPF Lredpfx Alsxyr Uqe Nsk * Permissible total weight 5,600 kg * Standard cab * Air conditioning * KWS quick-change ball system * Preparation for 2 x trailer coupling: ball and tow hitch – trailer load 3,500kg * Selectable all-wheel drive with mechanical differential lock and reduction gear * Large municipal hydraulic system with all available additional options * Equipment console mounting kit with power supply * Amber beacon * Electrically adjustable and heated exterior mirrors * Additional mirrors left and right * Lighting carrier + auxiliary headlights * 2 rear work lights * Radio with CD player * Adjustable ISRI driver’s suspension seat * Front mounting plate for attachments, quick-change mount SWV 500 * Wide winter tyres 285/65R16 Goodyear Winter Service Equipment: * New professional snow plough for municipal use, width 2.00 m * Alternatively with Fiedler V-plough FKP1710 * Spreader unit Epoke S2400 HS with brine tank and with control system ----Immediately ready-to-drive and operational vehicle from first owner, good condition! New inspection (TÜV/emissions test) ----Your contact for this vehicle: Daniel Seidler Tel: Mobile: also via Whatsapp Email: ----Subject to errors and changes!

Stanje: rabljeno, prevoženi kilometri: 786.068 km, moč: 324 kW (440,52 KM), prva registracija: 04/2011, vrsta goriva: dizel, lastna masa: 18.470 kg, največja dovoljena obremenitev: 7.530 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22,5 156/---G, konfiguracija osi: 3 osi, gorivo: dizel, barva: drugo, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 5.660 mm, širina tovornega prostora: 2.460 mm, velikost sprednje pnevmatike: 315/80R22,5 156/---G, velikost zadnje pnevmatike: 315/80R22,5 ---/145G, Oprema: ABS, klimatska naprava, spojka prikolice, tempomat, zapora diferenciala, žerjav, Nakladalna dvigalka Palfinger PK53002-SH, 4x izvlek, nosilnost 11,2 t pri 4 m, 8 t pri 6 m, 6 t pri 8 m, 4,75 t pri 10 m, 3,9 t pri 12 m, z hidravlično vitlo, vključno z daljinskim upravljalnikom in polnilno postajo v voznikovi kabini, -- Tiskarske napake, zmote in spremembe pridržane, vzorčne slike --, Več podatkov na zahtevo!, Več podrobnosti na zahtevo! Ledpfeyw Nqmjx Al Njrk

Stanje: rabljeno, prevoženi kilometri: 786.068 km, moč: 324 kW (440,52 KM), prva registracija: 04/2011, vrsta goriva: dizel, lastna masa: 18.470 kg, največja dovoljena obremenitev: 7.530 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22,5 156/---G, konfiguracija osi: 3 osi, gorivo: dizel, barva: drugo, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 5.660 mm, širina tovornega prostora: 2.460 mm, velikost sprednje pnevmatike: 315/80R22,5 156/---G, velikost zadnje pnevmatike: 315/80R22,5 ---/145G, Oprema: ABS, klimatska naprava, spojka prikolice, tempomat, zapora diferenciala, žerjav, Nakladalna dvigalka Palfinger PK53002-SH, 4x izvlek, nosilnost 11,2 t pri 4 m, 8 t pri 6 m, 6 t pri 8 m, 4,75 t pri 10 m, 3,9 t pri 12 m, z hidravlično vitlo, vključno z daljinskim upravljalnikom in polnilno postajo v voznikovi kabini, -- Tiskarske napake, zmote in spremembe pridržane, vzorčne slike --, Več podatkov na zahtevo!, Več podrobnosti na zahtevo! Lodpfx Aloyux R Ns Njrk

Stanje: rabljeno, prevoženi kilometri: 431.000 km, moč: 265 kW (360,30 KM), prva registracija: 10/2009, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: mehanski, dolžina tovornega prostora: 6.600 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2009, Oprema: ABS, klimatska naprava, parkirni grelec, žerjav, MAN TGS 26.360 / 6x4 PLATFORM 6,60 m + DIZALICA + DALJINSKO UPRAVLJANJE UVEZEN / BEZ NESREĆA U DOBROM STANJU! GODINA PROIZVODNJE: 2009 KILOMETRAŽA: 431 000 km OPREMA: - ABS - ASR - SERVO UPRAVLJAČ - ELEKTRIČNI PROZORI - ELEKTRIČNI RETROVIZORI - MOTORNA KOČNICA - TAHOGRAF PLATFORMA: 660 x 245 x 60 cm (D x Š x V) NOSIVOST: 10 000 kg UKUPNA TEŽINA: 26 000 kg MEĐUOSOVINSKO RASTOJANJE: 515/135 cm DIMENZIJE GUMA: 315/80R22,5 OVJES: PREDNJI: OPRUGE ZADNJI: ZRAČNI DIZALICA: PM 30 SP + DALJINSKO UPRAVLJANJE Lredpfx Alsrkyrms Nsk KONTAKT: * KUBA – POLJSKI, ENGLESKI, NJEMAČKI, ITALIJANSKI * SEBASTIAN – POLJSKI, NJEMAČKI, ITALIJANSKI, ????? * LASZLO – MAĐARSKI * COSTEL – RUMUNSKI (sve formalnosti za izvoz uključujući brojeve) * RADEK – ?????

Stanje: rabljeno, prevoženi kilometri: 445.996 km, moč: 294 kW (399,73 KM), prva registracija: 02/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 10/2024, zavore: retarder, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: ABS, klimatska naprava, žerjav, * Sun visor * ABS * ASR (traction control) * Radio Lrsdpfx Alew Sbqgs Nok * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air suspension seat (driver) * Differential lock, rear axle * Lift/steerable axle * Top air intake * Air dryer * Trailer coupling * 2-line air connection * HydroDrive front axle drive * 16-speed gearbox * Suspension: leaf/air * Payload: 11,550 kg * Continuous brake: intarder ----Special body: Crane: Hiab Jonsered 1420, high seat with seat heating, pilot control, fully hydraulic stabilizers, 6th + 7th control circuit for slewing and grab operation. Read load diagram: Lifts 4.25 t at 3 m, 3.24 t at 4 m, 2.68 t at 5 m, 2.28 t at 6 m, 1.95 t at 7 m, 1.65 t at 7.9 m. ----Body: Meiller roll-off tipper RK 20.70 for 5.5–7.4 m container/total container length, 20,000 kg lifting capacity, pusher arm, extendable rear underrun protection, internal controls. Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions form the basis of all purchase contracts, invoices, proforma invoices, orders, and sales discussions (see legal notice/imprint).

Stanje: rabljeno, prevoženi kilometri: 445.996 km, moč: 294 kW (399,73 KM), prva registracija: 02/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 10/2024, zavore: retarder, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: ABS, klimatska naprava, žerjav, * Sun visor * ABS * ASR (traction control) * Radio * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Driver's air suspension seat * Differential lock, rear axle * Lift/steering axle * Top-mounted air intake * Air dryer * Trailer coupling Lodpfx Aow Sbqasl Njrk * 2-line air connection * HydroDrive front axle drive * 16-speed * Suspension: leaf/air * Payload: 11,550 kg * Continuous brake: Intarder --- Special equipment: Crane: Hiab Jonsered 1420, elevated operator seat with seat heating, remote control, fully hydraulic outriggers, 6th and 7th control circuits for rotator and grapple operations. Load graph (read): lifts 4.25t at 3m, 3.24t at 4m, 2.68t at 5m, 2.28t at 6m, 1.95t at 7m, 1.65t at 7.9m. --- Body: Meiller roll-off tipper RK 20.70 for 5.5-7.4 meter containers/total container length, 20,000 kg lifting capacity, sliding arm, extendable rear underrun protection, internal controls. Sale to trade customers only. FOR EXPORT, ONLY NET PRICE TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCL. SPECIFICATIONS + ACCESSORIES. All contracts, invoices, proforma invoices, orders, and sales discussions are based on our General Terms and Conditions (see Imprint).

Stanje: pripravljen za uporabo (rabljen), Mitsubishi SE-EV-FV AC spindle motor, serial number as per photo, bolt hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, without cooling fan, normal signs of wear, 100% functional. NOTE: Please enquire separately for packaging and shipping costs! Lrodoi D I S Tjpfx Al Nek

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Originalno le 15.020 km Ljdpoyzrp Hefx Al Nerk Popolno za predelavo v avtodom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector Lredpfx Aljh R Taqj Nek = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) Ljdpfx Aemhhy Nsl Nork - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: rabljeno, Multicar M25 Year of manufacture: 1986 - with water tank (water tanker body) - with spreader body Lredpfx Alev Dwrae Nsk

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Lrodpfx Aewauaxol Nsk

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Lrjdpfx Alsx Ta Nxj Njk Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Lsdpfsyktv Sox Al Nsrk Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Ledpfx Aljyktrte Nork Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control