Kubota Kx 060-5 - 5,6 Ton.- Powertilt + Hydraul. Schnellw nakup rabljenega (69.458)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Nassandres sur Risle
1.118 km
Tereni viličar 5 ton - višina dviga 4,7 m
Mast explorerH 50 DA
Pokliči
Stanje: skoraj kot novo (rabljeno), Teren viličar MAST Explorer H50 DA, letnik 2008, v izjemnem stanju. Le 3.000 ur delovanja. Dvižna zmogljivost: 5 ton. Zanesljiv in zmogljiv Perkinsov motor. Hidravlični pogon. Stroj je bil skrbno vzdrževan. Popolno delovanje. Terenske pnevmatike. Idealen za gradbišča, kmetijstvo, industrijo ali zahtevna terena. Viličar je pripravljen za takojšnjo uporabo. Robusten stroj z znanim ugledom zanesljivosti in zmožnostjo uporabe na vseh vrstah terenov. Odlična kombinacija moči, okretnosti in udobja pri uporabi.
Crodpfx Ajy Ubc Ajm Tjc
Mali oglas
Hessisch Lichtenau
682 km
Enostebrni hidravlični stiskalnik 20 t, hitrodelujoča stiskalnica
EXNEREEX 20 S
Pokliči
Stanje: rabljeno, Single-column hydraulic press EXNER Type EEX 20 S
Machine No. 1615 Year of manufacture: 1980
Pressing Force: 20 tons
Throat Depth: 180 mm
Csdpfx Amsyz Dtde Torc
Table Surface: 380 x 350 mm
Table Opening: Ø 50 mm
Ram Surface: 310 x 250 mm
Clamping Pin: Ø 35 mm
Ram Stroke: 100 mm
Max. Installation Height: 250 mm
Table Height above Floor: 900 mm
Downward Speed: approx. 480 mm/s
Upward Speed: approx. 480 mm/s
Working Speed: 20 mm/s
Hydraulic Tank Capacity: 110 liters
Hydraulic Operating Pressure at 20 tons: 200 bar
Motor Power: 4 kW
Power Supply: 400 Volt, 50 Hz
- Stroke release via two-hand control or light barrier
- Operating modes: setup, two-hand operation, BWS
- SICK light barrier, Type LVU, with single- and double-stroke and safety function
- Rapid traverse and working stroke
- Stroke limitation dependent on pressure or travel
- Mechanically adjustable fixed stop
- Pressing force manually adjustable via knurled wheel
- Control cabinet mounted on side of the machine
- Operating manual and electrical wiring diagram included
- Stroke counter
Required space (L x W x H): 1250 x 750 x 2000 mm
Weight: 1.4 tons
Good condition.
Mali oglas
Wiefelstede
932 km
Prevozni voziček za težke obremenitve 5 ton
KTSDSL 2000/1000/H610 mm
Pokliči
Leto izdelave: 2009, stanje: dober (rabljeno), Flatbed trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer
- Manufacturer: KTS, Heavy-duty transport trolley industrial trailer Type DSL with single-axle turntable steering
- Type: DSL
- Platform dimensions: 2000/1000/H610 mm
- Load capacity: max. 5000 kg
- Tyres: Solid rubber
- Overall dimensions: 3560/1000/H610 mm
- Dead weight: 300 kg
Csdjl Tuu Djpfx Am Torc

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Turčija
1.244 km
320-tonska x 3-metrska hidravlična preša za upogibanje
CRONOSSTECHHPB 3100X320
Pokliči
Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features
• Y1, Y2, X, R 4-Axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC control unit
• Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm
• European type Promecam quick-release clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam lock)
• Narrow lower table (European type)
• GIVI linear scales
• Standard upper die (H:67, 850 R:08)
• Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4-6-8 axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic tool clamping
• WILA hydraulic upper and lower tool clamping
• Wide lower table for multi-groove tools
• Backgauge X distance 1000 mm
• AKAS or DSP laser beam front safety system
• Additional backgauge fingers
• Additional backgauge support
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 320
Bending Length (mm) 3100
Distance Between Side Frames (mm) 2600
Crsdpfx Ajx Nn Eaom Tec
Stroke (mm) 310
Open Height (mm) 535
Throat Depth (mm) 410
Table Height (mm) 955
Approach Speed (mm/sec) 150
Return Speed (mm/sec) 110
Pressing Speed (mm/sec) 10
Oil Tank (Liters) 290
Machine Weight (kg) 14,700
Main Motor (kW) 22
CNC Control Unit ESA S640
CNC Axis Count Y1-Y2-X-R (4 Axis)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA cam lock)
Safety System Front laser safety
Origin Turkey
Mali oglas
Turčija
1.244 km
H-TIP 500 TON ENAKOSMERNA HIDRAVLIČNA STISKALNICA
CRONOSSTECHCHP 500
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides
General Description
The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage.
CHP Series – Structural Features
The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke.
⚙️ Standard Equipment
- Steel construction, 8-guide H-frame press body
- Stress-relieved frame and carrier components via vibration
- Zr14 bronze slide bearings
- WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Machine structure designed and manufactured in compliance with CE standards
- PLC-controlled hydraulic system
- Touchscreen display (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- Ability to monitor hydraulic unit oil temperature and system status on display
- Cooling system
- Offline filtration
- Two-hand control system
- Light curtain (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear
📐 Technical Specifications – CHP 500
- Type: Steel construction, 8-guide H-frame press type
- Frame Material: St52 – ERDEMIR
- Slide Bearings: Zr14 bronze
- Capacity (Ram): 500 Tons
- Moving Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/m
- Squareness Tolerance: 60 micron/m
- Stroke (Ram): 1000 mm
- Min. Daylight: 100 mm
- Max. Daylight: 1100 mm
- Stress Relief: Vibration stress relief
- Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731)
- Max. Operating Pressure: 250 Bar
- Total Motor Power: 45 kW – IE3
- Main Pump: 70 cm³ – REXROTH or PARKER
- Moving Table Rapid Down Speed: 150 mm/sec
- Moving Table Drawing Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Main Cylinder Bore: Ø500 mm – Ck45
Cedsx N T H Aspfx Am Tjrc
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Press Height: 5800 mm
- Approx. Press Width: 3250 mm
- Approx. Press Depth: 2200 mm
- Distance from Floor to Lower Table: 1400 mm
- Pre-fill Valve: NG 150
- Hydraulic Power Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Offline Filtration: REXROTH or PARKER
- Linear Measurement Scale: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touchscreen Display: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 23 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H TIP 1000 TON ENODEJSTVENI HIDRAVLIČNI TISK
CRONOSSTECHCHP 1000
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.000 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1000
H-Type Single-Acting Hydraulic Press – 8 Guideways
General Description
The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guideway H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long lifespan. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines.
CHP Series – Structural Features
CHP series presses are designed with consideration for heavy industrial environments. The frame and main support structures are stress-relieved via vibration. The Bronze Zr14 slideway bearings provide uniform load distribution and high precision throughout the ram stroke.
Credpfx Ajx N T Rbem Tsc
⚙️ Standard Equipment
- Steel construction, H-type press frame with 8 guideways
- Vibration stress-relieved frame structure
- Bronze Zr14 slideway bearings
- Welding applications approved by WPQR & WPS under TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing compliant with CE standards
- PLC-controlled hydraulic system
- Touchscreen panel display (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination alert
- Hydraulic unit oil temperature and system status monitoring on screen
- Cooling system
- Off-line filtration
- Dual-hand control system
- Light barrier (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear
📐 Technical Specifications – CHP 1000
- Type: Steel construction, H-frame press with 8 guideways
- Frame Material: St52 – ERDEMİR
- Guideway Bearings: Bronze Zr14
- Capacity (Ram): 1000 Tons
- Moving Table Dimensions: 1500 × 2000 mm
- Fixed Table Dimensions: 1500 × 2000 mm
- Parallelism Tolerance: 120 micron/m
- Squareness Tolerance: 60 micron/m
- Stroke (Ram): 1000 mm
- Min. Daylight: 100 mm
- Max. Daylight: 1100 mm
- Weld Stress Relief: By vibration
- Welding Application: WPQR and WPS approved, certified by TÜRK-AK per EN ISO 15614-1/2017
- Max. Operating Pressure: 250 Bar
- Total Motor Power: 75 kW – IE3
- Main Pump: 70 cm³ – REXROTH or PARKER
- Movable Table Fast Down Speed: 150 mm/s
- Movable Table Pressing Speed: 12 mm/s
- Movable Table Return Speed: 170 mm/s
- Main Cylinder Bore: Ø500 mm – Ck45 (2 units)
- Auxiliary Fast Forward Cylinders: 2 units
- Approximate Height: 6000 mm
- Approximate Width: 3450 mm
- Approximate Depth: 2400 mm
- Lower Table Height from Floor: 1450 mm
- Pre-fill Valve: NG 200
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Distance Ruler: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touchscreen Panel: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 55 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H TIP 1200 TON ENODELNI HIDRAVLIČNI STISKALNIK
CRONOSSTECHCHP 1200
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type hydraulic deep drawing presses are specially designed for deep drawing, flow forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame design, it delivers maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model provides reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame with vibration technique - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press body Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,200 tons Moving Table Dimensions: 1,500 × 2,000 mm Fixed Table Dimensions: 1,500 × 2,000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Clearance: 100 mm Max. Clearance: 1,100 mm Stress Relief: Vibration stress relief Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding certification Max. Working Pressure: 250 bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,100 mm Approx. Press Width: 3,550 mm Approx. Press Depth: 2,400 mm Lower Table Height From Floor: 1,450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.
Csdsx N T Ruspfx Am Tsrc
Mali oglas
Turčija
1.244 km
H-tip 2500-tonski enodejavni hidravlični stiskalnik
CRONOSSTECHCHP 2500
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500
H-Type Hydraulic Press – 8-Guided
General Description
The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke.
The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-guided H-frame body type
- Stress-relieved frame structure by vibration
- Bronze Zr14 slide bearings
- Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing conforming to CE standards
- PLC-controlled hydraulic system
- Touchscreen panel (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- Ability to monitor hydraulic unit oil temperature and system status on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHP 2500
Type: Steel construction, 8-guided H-frame body type
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 2500 Tons
Movable Table Size: 1800 × 2600 mm
Fixed Table Size: 1800 × 2600 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 1000 mm
Min. Daylight: 200 mm
Max. Daylight: 1200 mm
Stress Relief: Vibration stress relieving
Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017
Max. Operating Pressure: 250 Bar
Total Motor Power: 180 kW – IE3
Credox N T S Eepfx Am Tsc
Main Pump: 140 cm³ – REXROTH or PARKER
Movable Table Fast Descent Speed: 150 mm/sec.
Movable Table Drawing Speed: 12 mm/sec.
Movable Table Return Speed: 170 mm/sec.
Main Cylinder Bore: Ø565 mm – Ck45 (4 units)
Auxiliary Acceleration Cylinders: 2 units
Approximate Press Height: 6500 mm
Approximate Press Width: 3950 mm
Approximate Press Depth: 2600 mm
Height of Lower Table from Floor: 1500 mm
Pre-Fill Valve: NG 200
Hydraulic Power Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touchscreen Panel: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 120 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H TIP 100/40 TON HIDRAVLIČNA GLOBOKA VLEKA
CRONOSSTECHCHSP 100/40
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 40 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 100/40
H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Slideways
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-slideway H-frame structure, maximum rigidity is ensured throughout the pressing process and parallelism and perpendicularity tolerances are consistently maintained along the stroke.
The CHSP 100/40 model is designed for precise deep drawing and spinning operations with a main ram capacity of 100 tons and a cushion (pot) capacity of 40 tons. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-slideway H-frame press body
- Vibration stress-relieved frame structure
- Bronze Zr14 slideway bearings
- WPQR and WPS certified welding by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- Touch screen panel (DELTA 7”)
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Monitoring of hydraulic unit oil temperature and system status via screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 100/40
Type: Steel construction, 8-slideway H-frame press body
Frame Material: St52 – ERDEMİR
Slideway Bearings: Bronze Zr14
Capacity (Ram): 100 Ton
Capacity (Cushion): 40 Ton
Moving Table Dimensions: 1000 × 1200 mm
Fixed Table Dimensions: 1000 × 1200 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 600 mm
Stroke (Cushion): 200 mm
Min. Daylight: 100 mm
Max. Daylight: 700 mm
Weld Stress Relief: Vibration stress relief
Welding Application: WPQR and WPS certified by TURK-AK
EN ISO 15614-1/2017 (Inspected by welding coordination engineers certified to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 11 kW – IE3
Main Pump: 22 cm³ – REXROTH or PARKER
Moving Table Fast Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Cushion Table Forward Speed: 30 mm/s
Main Cylinder Inner Diameter: Ø230 mm – Ck45
Cushion Cylinder Inner Diameter: Ø140 mm – Ck45
Auxiliary Accelerating Cylinders: 2 units
Approx. Press Height: 3400 mm
Approx. Press Width: 2950 mm
Approx. Press Depth: 2000 mm
Lower Table Height from Ground: 1250 mm
Pre-fill Valve: NG 100
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Distance Scale: NOVATECHNIK or TURCK
Crsdox N T Uyjpfx Am Tsc
PLC Application: DELTA
Touch Screen Panel: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 9 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H tip 400/150 ton hidravlična globoka vleka
CRONOSSTECHCHSP 400/150
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150
H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke.
The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-gibbed H-frame press body type
- Stress-relieved frame by vibration
- Bronze Zr14 slide bushings
- Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and pot stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Monitoring of hydraulic unit oil temperature and system status via screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 400/150
- Type: Steel construction, 8-gibbed H-frame press body
- Frame Material: St52 – ERDEMİR
- Slide Bushings: Bronze Zr14
- Capacity (Ram): 400 tons
- Capacity (Pot): 150 tons
- Moving Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Stroke (Ram): 1000 mm
- Stroke (Pot): 350 mm
- Min. Daylight: 100 mm
- Max. Daylight: 1100 mm
- Stress Relief: Vibration stress relief
- Welding Application: WPQR and WPS certified by TÜRK-AK
EN ISO 15614-1/2017
(Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731)
- Max. Working Pressure: 250 bar
- Total Motor Power: 37 kW – IE3
- Main Pump: 45 cm³ – REXROTH or PARKER
- Moving Table Fast Down Speed: 150 mm/sec
- Moving Table Spinning Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Pot Table Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø450 mm – Ck45
- Pot Cylinder Bore: Ø280 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Press Height: 5600 mm
- Approx. Press Width: 3250 mm
- Approx. Press Depth: 2200 mm
- Bottom Table Height from Floor: 1400 mm
- Pre-Fill Valve: NG 150
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Position Sensor: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touchscreen Panel: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 24 tons
Production Note
Crsdpfxox N Uhhs Am Tec
This machine is manufactured in Turkey by CRONOSSTECH.
Mali oglas
Turčija
1.244 km
H TIP 1500/500 TON HIDRAVLIČNO GLOBOKO VLEČENJE
CRONOSSTECHCHSP 1500/500
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.400 mm, sila umika: 500 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1500/500
H-Type Hydraulic Deep Drawing (Drawing) Press – 8-Guided
General Description
The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are engineered to provide maximum frame rigidity, precise parallelism, and long-term operational reliability for deep drawing applications that require very high tonnage and large bolster areas.
Cedpfx Ajx N Ukism Tjrc
Thanks to the 8-guide H-frame press structure, ram and bolster movements are controlled and stable throughout the pressing process.
The CHSP 1500/500 model has been developed for large-dimension dies, deep drawing, and controlled forming operations, with a main ram capacity of 1500 tons and a cushion capacity of 500 tons. The vibration-stress-relieved welded steel frame offers high strength and reliability for heavy-duty industrial conditions.
⚙️ Standard Equipment
• Welded steel construction, 8-guide H-frame body
• Vibration stress-relieved frame structure
• Bronze Zr14 slide bearings
• WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” DELTA touchscreen panel
• Adjustable ram and cushion stroke control
• Adjustable ram and cushion tonnage (pressure) control
• Automatic lubrication system
• Electronically monitored filter contamination alert
• Display of hydraulic unit oil temperature and system status
• Off-line filtration and industrial cooling system
• SIEMENS – SCHNEIDER switchgear components
• Industrial safety systems for operator protection
📐 Technical Specifications – CHSP 1500/500
Type: Welded steel construction, 8-guide H-frame body
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram / Cushion): 1500 / 500 Ton
Moving / Fixed Bolster: 1500 × 2400 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Cushion): 1000 / 350 mm
Daylight (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 90 kW – IE3
Main Pump: 101 cm³ – REXROTH or PARKER
Main Cylinder: Ø620 mm – Ck45 (2 units)
Cushion Cylinder: Ø360 mm – Ck45 (2 units)
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 87 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
220 TON 3 METRSKA HIDRAVLIČNA PREŠA ZA UPUGANJE
CRONOSSTECHHPB 3100X220
Pokliči
Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features
• Y1, Y2, X, R – 4-axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC control unit
• Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm
• European-type Promekam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam-type)
• Narrow lower table (European type)
Credsx Nnzbopfx Am Tjc
• GIVI brand linear scales
• Standard upper tool (H:67, 850 R:08)
• Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4, 6, and 8-axis backgauge configurations starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping systems
• Wide lower table for multi-way dies
• Backgauge X travel: 1000 mm
• AKAS or DSP laser-guided front safety system
• Additional backgauge fingers
• Additional backgauge tongues
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 220
Bending Length (mm) 3100
Distance Between Side Frames (mm) 2600
Stroke (mm) 310
Open Height (Daylight) (mm) 515
Throat Depth (mm) 410
Table Height (mm) 940
Approach Speed (mm/s) 180
Return Speed (mm/s) 140
Pressing Speed (mm/s) 10
Oil Tank Capacity (L) 290
Machine Weight (kg) 11,300
Main Motor Power (kW) 18.5
CNC Control Unit ESA S640
CNC Axis Count Y1-Y2-X-R (4 Axis)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA cam-type)
Safety System Laser front safety
Origin Turkey
Mali oglas
Turčija
1.244 km
175 TON x 3 METER HIDRAVLIČNA PREŠA ZA UPOR
CRONOSSTECHHPB 3100X175
Pokliči
Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 175 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features
• Y1, Y2, X, R 4-Axis CNC (X+R Servo)
• 410 mm stroke, 510 mm throat depth
• ESA S650 CNC Control Unit
• Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promecam quick-release die clamping system
• Sliding front support system
• Manual crowning system (Original WILA wedge type)
• Narrow bottom table (European type)
• GIVI brand linear scales
• Standard top punch (H: 67, 850 R:08)
• Standard bottom die (60x60 mm, 4 channels V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4-6-8 axis backgauge options starting from X+R
Crjdpox Nn U Usfx Am Tsc
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic top and bottom die clamping
• Wide bottom table for multi-channel tooling
• Backgauge X-axis travel up to 1000 mm
• AKAS or DSP laser front safety system
• Additional backgauge fingers
• Additional backgauge stop
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 175
Bending Length (mm) 3100
Clearance Between Side Frames (mm) 2600
Stroke (mm) 310
Open Height (mm) 515
Throat Depth (mm) 410
Table Height (mm) 935
Approach Speed (mm/s) 180
Return Speed (mm/s) 130
Pressing Speed (mm/s) 10
Oil Tank Capacity (L) 180
Machine Weight (kg) 9700
Main Motor Power (kW) 15
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 axes)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA wedge type)
Safety System Laser front safety
Origin Turkey
Mali oglas
Turčija
1.244 km
H-tip 100-tonska enojnega delovanja hidravlična stiskalnica
CRONOSSTECHCHP 100
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 100
H-Type Single-Acting Hydraulic Press – 8-Guided
General Description
The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures high stability and repeatable precision during pressing operations.
CHP Series – Structural Features
The CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved via vibration. Bronze Zr14 material is used for the slide bearings, providing long-lasting and stable operation.
Key Advantages
- 8-guided H-frame structure
- Vibration stress-relieved steel construction
- Welding applications in compliance with ISO standards
- PLC-controlled operation with touch screen interface
- Design focused on operator safety and process stability
⚙️ Standard Equipment
- Steel construction, 8-guided H-type press frame
- Stress-relieved frame and support components by vibration
- Bronze Zr14 slide bearings
- WPQR & WPS certified welding, accredited by TÜRK-AK
(EN ISO 15614-1:2017 / EN ISO 14731)
- Machine structure designed and manufactured to meet CE standards
- PLC-controlled hydraulic system
- Touch panel (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination indicator
- Monitoring of hydraulic unit oil temperature and system conditions via display
Crjdex N Tx Sspfx Am Toc
- Cooling system and off-line filtration
- Two-hand control system
- Light curtain (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 100
Type: Steel construction, 8-guided H-frame press
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 100 Ton
Moving Table Dimensions: 800 × 1000 mm
Fixed Table Dimensions: 800 × 1000 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 500 mm
Min. Clear Opening: 100 mm
Max. Clear Opening: 600 mm
Stress Relief Method: Vibration stress relief
Welding Certification: Accredited WPQR and WPS by TÜRK-AK; welding application certificate per EN ISO 15614-1/2017 (monitored by welding coordination engineers certified to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 11 kW – IE3
Main Pump: 22 cm³ – REXROTH or PARKER
Moving Table Fast Approach Speed: 150 mm/s
Moving Table Pressing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Main Cylinder Bore: Ø230 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 3400 mm
Approx. Press Width: 2950 mm
Approx. Press Depth: 2000 mm
Lower Table Height from Floor: 1250 mm
Pre-Fill Valve: NG 100
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approximate Weight: 6.5 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H-tip 200 ton enodelni hidravlični stiskalnica
CRONOSSTECHCHP 200
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200
H-Frame Single-Acting Hydraulic Press – 8-Guided
General Description
The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life.
CHP Series – Structural Features
CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision.
⚙️ Standard Equipment
- Steel construction, 8-guide H-frame press body
- Vibratory stress-relieved frame and load-bearing components
- Bronze Zr14 slide bearings
- WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Machine design and production in compliance with CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7")
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- Display of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Two-hand control system
- Light curtain (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 200
Type: Steel construction, 8-guide H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 200 Tons
Movable Table Size: 800 × 1000 mm
Fixed Table Size: 800 × 1000 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 600 mm
Min. Daylight: 100 mm
Max. Daylight: 700 mm
Stress Relieving: Vibration stress relief
Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 22 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Movable Table Fast Down Speed: 150 mm/s
Movable Table Drawing Speed: 12 mm/s
Movable Table Return Speed: 170 mm/s
Main Cylinder Inner Diameter: Ø320 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Cjdpfxex N T D Uj Am Torc
Approximate Height: 3800 mm
Approximate Width: 2950 mm
Approximate Depth: 2200 mm
Lower Table Height from Floor: 1350 mm
Pre-fill Valve: NG 125
Hydraulic Power Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Displacement Scale: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel Display: DELTA 7"
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 8 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
60/20 TONSKI STEBRNI TIP HIDRAVLIČNEGA TISKALNIKA
CRONOSSTECHCHKSP 60/20
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 60 t, hod: 400 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 20 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 60/20 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 60/20 ton four-post hydraulic deep drawing press is a robust and compact solution designed for precise metal forming, deep drawing, and spinning applications. The four-post construction ensures stable parallelism and perpendicularity tolerances are maintained throughout the pressing process.
The frame is manufactured from St52 grade steel and undergoes stress relief treatment via vibration. The ram and blankholder systems are independently controllable; stroke and pressure adjustments can be set precisely via the touchscreen panel.
Outfitted with REXROTH or PARKER brand hydraulic components, IE3 class motors, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. Operator errors are minimized with its PLC-controlled system.
This model is an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications.
Key Advantages
- Rigid four-post press frame
- Independent stroke and tonnage control for ram and blankholder
- Adjustable system via touchscreen panel
- High precision and repeatability
- Low maintenance requirement, long service life
Applications
- Metal spinning operations
- Deep drawing processes
- Die testing and prototype productions
- Metal processing and auxiliary production lines
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-Post
FRAME MATERIAL: St52 – ERDEMİR
POST DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 60 Ton
CAPACITY (BLANKHOLDER): 20 Ton
DISTANCE BETWEEN POSTS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 400 mm
STROKE (BLANKHOLDER): 100 mm
MIN. CLEARANCE: 100 mm
Credsx N Ulgopfx Am Toc
MAX. CLEARANCE: 500 mm
WELD STRESS RELIEF: Vibration stress relieving
WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, complies with EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 7.5 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT SPEED: 150 mm/sec
MOVING TABLE PRESSING SPEED: 12 mm/sec
MOVING TABLE RETURN SPEED: 170 mm/sec
BLANKHOLDER TABLE ADVANCE SPEED: 30 mm/sec
MAIN CYLINDER BORE: Ø 175 mm – Ck45
BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 pcs
APPROX. PRESS HEIGHT: 3100 mm
APPROX. PRESS WIDTH: 1050 mm
APPROX. PRESS DEPTH: 1050 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm
PRE-FILL VALVE: NG 100
HYDRAULIC POWER UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable from screen)
RAM/BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Displayed on screen
DIE MEMORY: Adjustable via screen
LINEAR SCALE: NOVATECHNIK or TURCK
PLC SYSTEM: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 5 Tons
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Mali oglas
Turčija
1.244 km
80/30 TONSKE KOLONSKI TIP HIDRAVLIČNEGA PREŠANJA
CRONOSSTECHCHKSP 80/30
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, hod: 500 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 30 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press
General Description
The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution designed for metal spinning, deep drawing, and die trial applications that require high precision. It features a rigid four-column body structure.
The body is constructed from St52 grade steel, stress-relieved by vibration to ensure high parallelism and perpendicularity tolerances during pressing. The ram and die cushion systems operate independently; stroke and pressure settings can be precisely controlled from the operator panel.
Crjdpsx N Ultefx Am Toc
Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled architecture, the press offers long life, safety, and energy efficiency. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts.
This model is an ideal solution for small and medium batch production, die trials, and precision forming operations.
Key Advantages
- Rigid four-column press frame construction
- Independent stroke and tonnage adjustment for ram and die cushion
- Full control via touchscreen panel
- High repeatability and accuracy
- Low maintenance cost, long service life
Application Areas
- Metal spinning
- Deep drawing operations
- Die trials and prototype manufacturing
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction-hardened, chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 80 tons
CAPACITY (DIE CUSHION): 30 tons
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 500 mm
STROKE (DIE CUSHION): 150 mm
MIN. DISTANCE BETWEEN TABLES: 100 mm
MAX. DISTANCE BETWEEN TABLES: 600 mm
STRESS RELIEVING: Vibration method
WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 11 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST APPROACH SPEED: 150 mm/sec
MOVABLE TABLE SPINNING SPEED: 12 mm/sec
MOVABLE TABLE RETURN SPEED: 170 mm/sec
DIE CUSHION TABLE ADVANCE SPEED: 30 mm/sec
MAIN CYLINDER BORE DIAMETER: Ø 200 mm – Ck45
DIE CUSHION CYLINDER BORE DIAMETER: Ø 125 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROXIMATE MACHINE HEIGHT: 3300 mm
APPROXIMATE MACHINE WIDTH: 1050 mm
APPROXIMATE MACHINE DEPTH: 1050 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm
MAIN FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (Adjustable via screen)
RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Viewable via screen
DIE MEMORY: Adjustable via screen
LINEAR POSITION SENSOR: NOVATECHNIK or TURCK
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 5.5 tons
Mali oglas
Turčija
1.244 km
250/80 TON KOLIČNI TIP HIDRAVLIČNEGA GLOBEGA VLEČENJA
CRONOSSTECHCHKSP 250/80
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 800 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 80 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 250 / 80 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications.
The ST52 grade steel frame undergoes stress relief via vibration treatment to ensure long-term high parallelism and perpendicularity tolerances. The ram and cushion systems operate independently, allowing precise adjustment of stroke and pressure via the touchscreen panel.
Featuring REXROTH or PARKER hydraulic components, IE3 class motors, and PLC-controlled structure, this model delivers high efficiency and reliable operation. Automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements.
With its 250 / 80 ton capacity, this model is ideal for medium and heavy-duty metal forming, deep drawing, and die applications—making it the perfect industrial press solution.
Key Advantages
- High-rigidity four-column frame design
- Independent stroke and tonnage adjustment for ram and cushion
Crsdpfjx N Um Rjx Am Tsc
- Full control via touchscreen panel
- High precision and repeatability
- Long service life and low maintenance design
Application Areas
- Metal forming applications
- Deep drawing operations
- Die testing and production lines
- Auxiliary pressing processes
⚙️ STANDARD & TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts
SLIDE BEARINGS: Bronze Zr14
CAPACITY (RAM): 250 Ton
CAPACITY (CUSHION): 80 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 800 mm
STROKE (CUSHION): 200 mm
MIN. CLEARANCE: 100 mm
MAX. CLEARANCE: 900 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 22 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT: 150 mm/sec
FORMING SPEED: 12 mm/sec
RETURN SPEED: 170 mm/sec
CUSHION TABLE ADVANCE SPEED: 30 mm/sec
MAIN CYLINDER BORE: Ø 360 mm – Ck45
CUSHION CYLINDER BORE: Ø 200 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm
LOWER TABLE HEIGHT FROM GROUND: 1300 mm
MAIN FILL VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 16 Tons
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Mali oglas
Turčija
1.244 km
320 TONSKI 4-METRSKI HIDRAVLIČNI PREŠA-UPOGIBNI STROJ
CRONOSSTECHHPB 4100X320
Pokliči
Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features
• Y1, Y2, X, R 4-Axis CNC (X+R Servo)
• 410 mm Stroke, 510 mm Throat Depth
• ESA S650 CNC Control Unit
• Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promekam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam type)
• Narrow lower table (European type)
• GIVI brand linear scales
• Standard upper tool (H: 67, 850 R:08)
• Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4-6-8 axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide lower table for multi-groove dies
• Rear gauge X travel 1000 mm
• AKAS or DSP front safety system with laser beam
• Additional backgauge fingers
• Additional backgauge tongues
TECHNICAL SPECIFICATION VALUE
Codpfsx Nn I Usx Am Tsrc
Bending Force (Ton) 320
Bending Length (mm) 4100
Distance Between Side Frames (mm) 3600
Stroke (mm) 310
Open Height (mm) 535
Throat Depth (mm) 410
Table Height (mm) 955
Approach Speed (mm/s) 150
Return Speed (mm/s) 110
Pressing Speed (mm/s) 10
Oil Tank (L) 290
Machine Weight (kg) 16800
Main Motor (kW) 22
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 Axes)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA cam type)
Safety System Front laser safety
Origin Turkey
Mali oglas
Turčija
1.244 km
400 tonski x 6 metrov hidravlični prečni stiskalnik
CRONOSSTECHHPB 6100X400
Pokliči
Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 1.055 mm, globina grla: 510 mm, delovna širina: 6.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 5.100 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features
• Y1, Y2, X, R – 4-Axis CNC (X+R Servo)
• 410 mm Stroke, 510 mm Throat Depth
• ESA S650 CNC Control Unit
• Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm
• European type Promekam quick die clamping system
• Sliding front support system
• Manual crowning system (Original WILA cam type)
• Narrow lower table (European type)
• GIVI brand linear scales
• Standard upper tool (H: 67, 850 R:08)
• Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60)
• LED lighting
Optional Features
• 4-6-8 axis backgauge options starting from X+R
• ROLLERI Roll200 hydraulic die clamping
• WILA hydraulic upper and lower die clamping
• Wide lower table for multi-channel dies
• Backgauge X travel up to 1000 mm
• AKAS or DSP front laser safety system
• Additional backgauge fingers
• Additional backgauge supports
TECHNICAL SPECIFICATIONS VALUE
Bending Force (Ton) 400
Bending Length (mm) 6100
Distance Between Side Frames (mm) 5100
Csdpfjx Nn Syox Am Tjrc
Stroke (mm) 310
Daylight (mm) 535
Throat Depth (mm) 510
Table Height (mm) 1055
Approach Speed (mm/sec) 100
Return Speed (mm/sec) 80
Pressing Speed (mm/sec) 8
Oil Tank (Lt) 400
Machine Weight (kg) 33000
Main Motor (kW) 30
CNC Control Unit ESA S640
Number of CNC Axes Y1-Y2-X-R (4 Axes)
Backgauge X (mm) 750
Backgauge R (mm) 250
Crowning Manual (WILA cam type)
Safety System Laser front safety
Origin Turkey
Mali oglas
Turčija
1.244 km
H-TIP 150 TON ENODEJNO DELOJOČA HIDRAVLIČNA STISKALNICA
CRONOSSTECHCHP 150
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150
H-Type Single-Acting Hydraulic Press – 8 Guides
General Description
The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life.
CHP Series – Structural Features
CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance.
⚙️ Standard Equipment:
• Steel construction, H-type press body with 8 slide guides
• Stress-relieved frame and load-bearing parts (vibration treated)
• Bronze Zr14 slide bushings
• WPQR & WPS certified welding, accredited by TÜRK-AK
(EN ISO 15614-1:2017 / EN ISO 14731)
• Machine frame designed and manufactured according to CE standards
• PLC-controlled hydraulic system
• Touch panel display (DELTA 7”)
• Adjustable ram stroke and tonnage control
• Automatic lubrication system
• Electronic filter contamination warning
• Monitoring of hydraulic oil temperature and system status on screen
• Cooling system
• Off-line filtration
• Two-hand control system
• Light curtain (standard operator safety)
• SIEMENS and SCHNEIDER electrical switchgear
📐 Technical Specifications – CHP 150
• Type: Steel construction, 8-guide H-frame press
• Frame Material: St52 – ERDEMİR
• Slide Bushing: Bronze Zr14
• Capacity (Ram): 150 Tons
• Movable Table Dimensions: 800 × 1000 mm
• Fixed Table Dimensions: 800 × 1000 mm
• Parallelism Tolerance: 120 micron/meter
• Squareness Tolerance: 60 micron/meter
• Stroke (Ram): 500 mm
• Minimum Daylight: 100 mm
• Maximum Daylight: 600 mm
• Weld Stress Relief: Vibration treated
• Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731)
• Max. Working Pressure: 250 Bar
• Total Motor Power: 18.5 kW – IE3
• Main Pump: 32 cm³ – REXROTH or PARKER
• Movable Table Fast Descent Speed: 150 mm/sec
• Movable Table Pressing Speed: 12 mm/sec
• Movable Table Return Speed: 170 mm/sec
• Main Cylinder Inner Diameter: Ø280 mm – Ck45
• Approx. Height: 3650 mm
• Approx. Width: 2950 mm
• Approx. Depth: 2000 mm
• Lower Table Height from Floor: 1250 mm
• Pre-fill Valve: NG 100
• Hydraulic Unit: REXROTH or PARKER
• Cooling System: EMMEGI – CIESSE – PARKER
• Off-line Filtration: REXROTH or PARKER
• Linear Distance Encoder: NOVATECHNIK or TURCK
• PLC: DELTA
• Touch Panel: DELTA 7”
• Switchgear: SIEMENS – SCHNEIDER
• Approximate Weight: 7 Tons
Crsdpex N T Dzefx Am Tec
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Turčija
1.244 km
H-TIP 400 TON ENODELNI HIDRAVLIČNI STISKALNIK
CRONOSSTECHCHP 400
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 400
H-Type Single-Acting Hydraulic Press – 8-Guided Slides
General Description
The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions designed with high rigidity for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 slide guides ensures that high forces generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting and reliable performance for heavy-duty applications requiring high tonnage.
CHP Series – Structural Features
CHP series presses are engineered for heavy-duty operations. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide even load distribution throughout ram movement, which ensures sustained precision over time.
⚙️ Standard Equipment
- Steel construction, H-type press frame with 8 slide guides
- Stress-relieved frame and supporting components by vibration
- Bronze Zr14 slide bearings
- WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Machine structure designed and produced in accordance with CE standards
- PLC-controlled hydraulic system
- Touch screen panel (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- Hydraulic unit oil temperature and system status monitoring on display
- Cooling system
- Off-line filtration unit
- Two-hand control system
- Light curtain (standard for operator safety)
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 400
Type: Steel construction, 8-slide H-frame press
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 400 Ton
Moving Table Size: 1200 × 1500 mm
Fixed Table Size: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/meter
Squareness Tolerance: 60 micron/meter
Stroke (Ram): 800 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Weld Stress Relief: Vibration stress relief
Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 welding practices (certified welding coordination engineers according to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Moving Table Fast Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Crsdpfx Aex N T Hpom Toc
Main Cylinder Bore: Ø450 mm – Ck45
Auxiliary Acceleration Cylinders: 2 pcs
Approx. Press Height: 5600 mm
Approx. Press Width: 3250 mm
Approx. Press Depth: 2200 mm
Lower Table Height from Floor: 1400 mm
Pre-Fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Sensor: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 19.5 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H-TIP 800-TONSKI ENODEJSTVENI HIDRAVLIČNI TISK
CRONOSSTECHCHP 800
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, hod: 800 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 800
H-Type Single-Acting Hydraulic Press – 8-Guided Slides
General Description
Csdjx N T Nkepfx Am Terc
The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slider H-frame design ensures balanced distribution of high forces generated during pressing, offering maximum rigidity and long-lasting use. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines.
CHP Series – Structural Features
CHP series presses are engineered with the demands of heavy industry in mind. The frame and main load-bearing components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise operation throughout the ram movement.
⚙️ Standard Equipment
Steel construction, 8-guide H-type press body
Stress-relieved frame by vibration
Bronze Zr14 slide bearings
TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731)
Design and manufacturing in compliance with CE standards
PLC-controlled hydraulic system
Touch panel display (DELTA 7”)
Adjustable ram stroke and tonnage control
Automatic lubrication system
Electronically monitored filter contamination warning
Display of hydraulic unit oil temperature and system status on screen
Cooling system
Off-line filtration
Two-hand control system
Light curtain (standard for operator safety)
SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 800
Type: Steel construction, 8-guided H-frame press type
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 800 Tons
Moving Table Dimensions: 1500 × 2000 mm
Fixed Table Dimensions: 1500 × 2000 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 800 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Stress Relief: Vibration stress relieving
Welding: WPQR and WPS certified, EN ISO 15614-1/2017, accredited by TÜRK-AK (welds are supervised by certified welding coordination engineers in accordance with EN ISO 14731)
Max. Operating Pressure: 250 Bar
Total Motor Power: 75 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Moving Table Rapid Descent Speed: 150 mm/sec
Moving Table Drawing Speed: 12 mm/sec
Moving Table Return Speed: 170 mm/sec
Main Cylinder Bore: Ø390 mm – Ck45 (2 units)
Auxiliary Acceleration Cylinders: 2 units
Approximate Height of Press: 6000 mm
Approximate Width of Press: 3350 mm
Approximate Depth of Press: 2700 mm
Lower Table Height from Floor: 1450 mm
Pre-fill Valve: NG 200
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Sensor: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Screen Panel: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 45 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H TIP 2000 TON ENODELNI HIDRAVLIČNI TISK
CRONOSSTECHCHP 2000
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.000 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2000
H-Type Hydraulic Press – 8 Guideways
General Description
The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame construction ensures maximum rigidity during pressing, maintaining parallelism and perpendicularity tolerances throughout the long stroke.
The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor structure, is a reliable and long-lasting solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame is stress-relieved by vibration to ensure stable operation.
⚙️ Standard Equipment
• Steel construction, 8-guideway H-frame press type
• Frame stress-relieved by vibration
• Bronze Zr14 guideway bearings
• Welding applications approved by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731)
Crodpex N T Srjfx Am Tsc
• Design and production in accordance with CE standards
• PLC-controlled hydraulic system
• Touchscreen panel (DELTA 7”)
• Adjustable ram stroke and tonnage control
• Automatic lubrication system
• Electronic filter contamination warning
• On-screen monitoring of hydraulic unit oil temperature and system status
• Cooling system
• Off-line filtration
• Safety systems for operator protection
• SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHP 2000
• Type: Steel construction, 8-guideway H-frame press type
• Frame Material: St52 – ERDEMİR
• Guideway Bearings: Bronze Zr14
• Capacity (Ram): 2000 Tons
• Moving Table Dimensions: 1500 × 2500 mm
• Fixed Table Dimensions: 1500 × 2500 mm
• Parallelism Tolerance: 120 micron/m
• Perpendicularity Tolerance: 60 micron/m
• Stroke (Ram): 1000 mm
• Min. Daylight: 200 mm
• Max. Daylight: 1200 mm
• Weld Stress Relief: Vibration stress relief
• Welding Certification: EN ISO 15614-1/2017, WPQR, and WPS approved by TURK-AK accredited certification
• Max. Operating Pressure: 250 Bar
• Total Motor Power: 180 kW – IE3
• Main Pump: 140 cm³ – REXROTH or PARKER
• Fast Descent Speed (Moving Table): 150 mm/s
• Spinning Speed (Moving Table): 12 mm/s
• Return Speed (Moving Table): 170 mm/s
• Main Cylinder Bore: Ø720 mm – Ck45 (2 units)
• Auxiliary Acceleration Cylinders: 2 units
• Approximate Press Height: 6300 mm
• Approximate Press Width: 3850 mm
• Approximate Press Depth: 2500 mm
• Bottom Table Height from Floor: 1500 mm
• Pre-fill Valve: NG 200
• Hydraulic Unit: REXROTH or PARKER
• Cooling System: EMMEGI – CIESSE – PARKER
• Off-line Filtration: REXROTH or PARKER
• Linear Scale: NOVATECHNIK or TURCK
• PLC Application: DELTA
• Touchscreen Panel: DELTA 7”
• Switchgear Components: SIEMENS – SCHNEIDER
• Approximate Weight: 95 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Mali oglas
Turčija
1.244 km
H TIPA 150/50 TON HIDRAVLIČNA GLOBOKA VLEČNA STISKALNICA
CRONOSSTECHCHSP 150/50
Pokliči
Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 50 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 150/50
H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-guided H-frame structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently upheld throughout the stroke.
The CHSP 150/50 model is specially engineered for precise and repeatable deep drawing operations, with a 150-ton main ram and a 50-ton cushion (die cushion) capacity. The frame construction undergoes stress-relieving via vibration, ensuring reliable and long-lasting performance.
⚙️ Standard Equipment
- Steel construction, 8-guided H-frame press type
- Vibration stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in accordance with CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Display of hydraulic unit oil temperature and system status on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHSP 150/50
Type: Steel construction, 8-guided H-frame press type
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 150 Ton
Capacity (Cushion): 50 Ton
Movable Table Size: 1000 × 1200 mm
Fixed Table Size: 1000 × 1200 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 600 mm
Stroke (Cushion): 200 mm
Min. Daylight Opening: 100 mm
Max. Daylight Opening: 700 mm
Stress Relief: Vibration stress relieving
Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 18.5 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Movable Table Fast Down Speed: 150 mm/sec
Movable Table Drawing Speed: 12 mm/sec
Movable Table Return Speed: 170 mm/sec
Csdox N T U Hspfx Am Torc
Cushion Table Forward Speed: 30 mm/sec
Main Cylinder Internal Diameter: Ø280 mm – Ck45
Cushion Cylinder Internal Diameter: Ø160 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Height of the Press: 3650 mm
Approx. Width of the Press: 2950 mm
Approx. Depth of the Press: 2000 mm
Lower Table Height from Floor: 1250 mm
Pre-fill Valve: NG 100
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Scale: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel Display: DELTA 7”
Electrical Components: SIEMENS – SCHNEIDER
Approx. Weight: 11 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Olajšamo vam iskanje: "kubota kx 060-5 - 5,6 ton.- powertilt + hydraul. schnellw"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































