Kröger Pnevmatska Pištola nakup rabljenega (532)

Stanje: pripravljen za uporabo (rabljen), Schmidt 24-041-89 Pneumatikprés Sila lisovania: 9 kN Dočasný chod (nábeh): 15 mm Pedpfx Ahexxaz Aj Usgl Obsluha oboma rukami Max. menovitý tlak: 9 bar Zdvih: 50 mm Radi vás privítame na obhliadke. Rovnako vám môžeme zaistiť cenovo výhodnú prepravu! Dostanete riadnu faktúru. Pre zahraničných zákazníkov vieme vystaviť aj faktúru bez DPH, za predpokladu platného IČ DPH. Predmetom medzičasného predaja. Navštívte náš obchod a pozrite si aj naše ďalšie ponuky. Uvedené obchodné názvy a ochranné známky sú majetkom ich príslušných vlastníkov a slúžia len na identifikáciu a popis produktov. Odchýlky od technických údajov a chyby v popise položky môžu nastať a sú vyhradené.

Stanje: pripravljen za uporabo (rabljen), Schmidt 33-156-01 kolenasta stiskalnica PressControl 500 Tlačna sila: 15 kN Hod: 40 mm Zakasnitev zaustavitve: 0,07 s Pot zaustavitve: 15 mm PressControl 500 Pgjdpfx Ahjxcn Apo Uel Dvo-ročno upravljanje Vabljeni na ogled stroja. Po želji lahko za vas organiziramo cenovno ugoden prevoz! Prejeli boste ustrezen račun. Za tuje stranke lahko izdamo neto račun, če je zagotovljena veljavna ID za DDV. Pridržujemo si pravico do predhodne prodaje. Obiščite našo trgovino in poglejte še druge naše ponudbe. Navedena podjetja in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možna so odstopanja v tehničnih podatkih ter napake v opisu artikla, pridržujemo si pravico do sprememb.

Stanje: zelo dobro (rabljeno), Pnevmatsko upravljene, vodno hlajene točkovne varilne klešče Blagovna znamka DALEX, tip 3238-4 z dvojnim hodom valja Dolgi hod: 75 mm predhod: 50 mm delovni hod z nastavitvijo: 0-25 mm ročni krmilni ventil Nazivna moč pri 50 % ED: 16 kVA sekundarni kratkostični tok: 13,5 kA sekundarna napetost v prostem teku: 3,4 V Razdalja med rokami: 130 mm moč elektrode: 270 daN Pgodpfsynl Tkjx Ah Ujl doseg: 500 mm z 10 m priključnim kablom vključno: sinhrono varilno krmiljenje RS 12 z glavnim stikalom z kardanom in obešalom

Stanje: zelo dobro (rabljeno), ročna, vodno hlajena točkovna varilna klešča Proizvajalec: DALEX Tip: 3218-4 z dvojnim hodnim mehanizmom kardanska obešanka in nosilna zanka Pgjdpfx Aheynl Sgo Uol Nazivna moč pri 50 % ED: 16 kVA Sekundarni kratkostični tok: 13,5 kA Sekundarna prostovrtna napetost: 3,4 V Sila elektrode: 240 daN Izpust roke: 500 mm z 10 priključnimi kabli vključno s sinhronim dodatnim krmiljenjem 1=01 TT s 3 m napajalnim kablom in CEE vtikačem

Stanje: novo, Leto izdelave: 2025, Rated power at 50% duty cycle: 2.5 kVA Short-circuit current: 8.2 kA Electroforce: max. 120 daN (at 125 mm arm length) Weight: approx. 11 kg --- with 125 mm electrode arms --- Welding control integrated Thyristor-based power, time, and pulse controller --- Warranty: 12 months Pgedpfx Ahoxl Uqxo Uol --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Leto izdelave: 1990, stanje: Okvarjen nosilec rezervnih delov (rabljen), I am selling a dowel insertion machine Cerisola Savona. Vibration magazine with insertion head suitable for 8mm dowels. Insertion gun is missing! Available immediately. 220V connection. Pjdpfx Ahogzlrbj Ujgl

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: nepreverjeno, - Total lift: 300 mm - Maximum pressing force: 68.9 kN - Power: 0.3 kW - Min./max. air pressure: 3 - 6 bar - Machine weight: 1,250 kg Pgsdowxvwijpfx Ah Uol

Stanje: dober (rabljeno), Manufacturer: Unknown Press Type: P 14 (?) Type: Table-Mounted Press Dimensions: 150 x 220 x 750 mm Pgjdpfx Ahert Imms Uel Table Dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg

Stanje: zelo dobro (rabljeno), Ročna, vodno hlajena punkt varilna klešča Blagovna znamka: DALEX, Tip: 3218 Pedpfx Aoykvd Esh Usgl Nazivna moč pri 50 % ED: 16 kVA Sekundarni kratkostični tok: 13,5 kA Sila elektrod: 270 daN Razdalja med rokama: 130 mm Izvleček roke: 500 mm z mehanizmom dvojnega hoda kardanska obešanka in obešalni kavelj 10 m priključni kabel Asinhronski varilni krmilnik RB 11 z 8-stopenjskim stikalom Čas toka: 3-100 period

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Control panel: Siemens SIMATIC HMI, operating hours: 2169 h, with MHG 1703-2.2 dust extractor and extensive accessories. Pgjdpfxslubvbe Ah Uel

Stanje: rabljeno, Pnevmatska enostebrna stiskalnica RECTUS - FRIEDMANN & MAIER tip K3000 / 50 / 6A Pgjdpjw A Srwjfx Ah Usl Pnevmatska stiskalnica Tov. št.: 3437 Leto izdelave: ca. 1990 Tlačna sila: 3,0 t pri 6 bar Tlačna sila: 2,6 t pri 5 bar Tlačna sila: 2,2 t pri 4 bar Tlačna sila: 1,6 t pri 3 bar Tlačna sila: 1,0 t pri 2 bar Razpon: 150 mm Tehnični hod: 6 mm Predhod: 50 mm Skupni hod: 56 mm Površina bata: Ø 100 mm Vpenjalo za orodje: Ø 12 mm Vgradna višina: max. 180 mm Namizna površina: 200 x 200 mm Potreba po stisnjenem zraku: max. 6 bar - Pnevmatski močnik z mehanskim ojačevalcem sile (klinasto vzvodno načelo) - Pritisni valj nastavljiv po višini preko navojne vretena na stojalu (50 mm) - Brez pnevmatskega krmiljenja - Dušilni ventil za nastavitev hitrosti hoda Dimenzije (d x š x v): 440 x 230 x 750 mm Teža: 127 kg Dobro stanje

Stanje: rabljeno, Single-column pneumatic press, hydraulic press PAUL ANTON model PVT 2 Pneumatic bench press, stamping press Serial no. 97148 Year of manufacture: approx. 1980 Pressing force: 10 tons Throat depth: 100 mm Ram stroke: approx. 25 mm Ram face: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - very robust construction - hydro-pneumatic press with air-to-oil pressure amplification Pgedpfxjtrpiie Ah Usl - pneumatic foot switch - ram with M12 internal thread - metal base frame Space requirements (L x W x H): 850 x 620 x 1560 mm Weight: approx. 200 kg Good condition

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 20010329, Offer 17500 Technical data approx.: - Rated power approx. 100 kVA - Reach approx. 350 mm - Throat depth approx. 200 mm - Arm diameter approx. 50 mm - Double-action cylinder Type X - Z force at 10 bar approx. 2400 daN - Stroke approx. 20 mm - Throat depth approx. 200 mm Pgodpfxev Eak Io Ah Uol - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Stanje: novo, Pneumatic Strip Nailer 6512/130 SQ for nails up to 130 mm length Pgsdpfxevcl Sls Ah Ujl Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battening, crate and pallet construction, fence construction, load securing, etc. • Sequential trigger • For paper-collated safety strip nails • Eurocode 5 nails according to DIN EN 14592 • User-friendly depth adjustment • Robust and high impact • Optimally sound-dampened and well-balanced Technical data: • Trigger type: Sequential trigger • Air consumption per drive: 5.40 liters • Nail lengths: 90 to 130 mm • Nail diameter: 3.4 – 4.2 mm • Nail type: 34° safety strip nails • Magazine capacity: 75 nails • Weight: 6.60 kg • Dimensions (L x W x H): 470 x 150 x 460 mm The nailer is new and unused. Only minor showroom wear may be present as the tool was on display. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer – NO PAYPAL! If you have any questions, please feel free to contact us.

Stanje: kot nova (razstavni stroj), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to fasten as close as 6 mm from the edge. Its primary application is in work on metal framing. Thanks to its compact nose, you can also use the HN25C2 with thin metal profiles. Using special nails, the tool can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12-25 bar • Nail length: 15-25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore considered used, but it is in perfect technical condition. It comes supplied in a carrying case with user manual. Pjdsyizrfepfx Ah Uogl Please refer to the photos for further details. You will receive an invoice with VAT shown separately. Payment is by advance bank transfer only – no PayPal! Collection from our store is of course possible as well. Shipping is via UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Pjdpsvxtcqsfx Ah Usgl Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, globina grla: 160 mm, vrsta hlajenja: voda, Oprema: dokumentacija / priročnik, Handbetätigte, wassergekühlte Punktschweißzange Hersteller: DALEX Typ: 3116 Anschluss: 400 V, 50 Hz Nennleistung bei 50 % Einschaltdauer: 6,35 kVA Sekundär-Kurzschlussstrom: 8,3 kA Elektrodenkraft: 180 daN Pgsdpfer Iynfox Ah Ujl Armabstand: 120 mm mit 5 m Anschlusskabel mit Steuerleitung mit asynchroner Schweißsteuerung RA (RB 11) 8-stufiger Schalter zur Leistungsregelung Stromzeit: 2–100 Per Wenig benutzt, aus Schulbetrieb.

Stanje: zelo dobro (rabljeno), Pnevmatsko upravljene, vodno hlajene točkovne varilne klešče Proizvajalec: DALEX Tip: 3328-6 Nazivna moč pri 50 % ED: 25 kVA Sekundarni kratkostični tok: 22,5 kA Sekundarna napetost brez obremenitve: 4,75 V Moč elektrod: 600 daN Pgjdpfjvurw Eex Ah Uel Posebna izvedba z razdaljo med rokami 248 mm Z dvojnim dvigalnim cilindrom – dolgi hod 51 mm – predhodni hod 33 mm – delovni hod 0-18 mm z nastavitvijo hoda S kardansko obešanko in obešalnim vijakom Priključni kabel dolžine 10 m Širina roke: 350 mm Sinhrono upravljanje varjenja MPS 1536

Stanje: skoraj kot novo (rabljeno), Vodno hlajene, pnevmatske točkovne varilne klešče s 5/2 magnetnim ventilom. Znamka DALEX, tip 3228-4. Nazivna moč pri 50 % ED: 16 kVA. Sekundarni kratkostični tok: 13,5 kA. Sila elektrod: 270 daN. Razmik rok: 130 mm. Doseg rok: 350 mm. Z dvojnim hodom valja: dolgi hod 75 mm, predhodni hod 50 mm, delovni hod z nastavitvijo 0–25 mm. Kardanska obešalna in obešalni nosilec. 10 m priključnega kabla in krmilnega voda. Vključuje: dodatni varilni krmilnik MPS 15033. Točkovne varilne klešče imajo komaj kakšne sledi uporabe in so kot nove. Psdjxwlzljpfx Ah Usgl

Stanje: zelo dobro (rabljeno), Pnevmatsko vodno hlajene klešče za točkovno varjenje Znamka: DALEX Tip 3328-4 S 5/2 magnetnim ventilom – dvižni valj z dvojnim hodom, dolgi hod 60 mm, predhod 40 mm Delovni hod z nastavitvijo 0-20 mm Nazivna moč pri 50 % ED: 25 kVA Psdpfjxywt Eox Ah Usgl Sekundarni kratkostični tok: 16,5 kA Sekundarna prostovolna napetost: 4,7 V Elektrodna sila: 280 daN Razdalja med rokami: 140 mm Izvlek rok: 500 mm S kardanskim obešanjem in obešalnim lokom 10 m priključnega in krmilnega kabla Vključeno: regulacija varjenja MPS 15036 z glavnim stikalom po VDE 0/100

Stanje: zelo dobro (rabljeno), High-performance spot welding tongs with double-stroke cylinder Manufacturer: DALEX Model: 3528 - 4 Rated capacity at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60–730 daN Double-stroke cylinder: long stroke 62 mm, pre-stroke 40 mm Working stroke with adjustable lift: 0–22 mm Pgedpfx Ahjki Tkpj Uel Equipped with 5/2-way solenoid valve Cardan suspension and suspension bracket 10 m connection cable with control line Arm reach: 170 mm Arm spacing: 170 mm Complete with 1 pair of electrode arms, straight top and bottom, 170 mm Synchronised welding control MPS 1036 Sample photo

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1998, Machine after technical inspection and complete overhaul - Year of manufacture: 1998 TECHNICAL SPECIFICATIONS: Main saw blade diameter: ⌀ 350 mm Max. cutting height: 70 mm Max. cutting width: 150 mm Motor power: 3 kW Spindle speed: 4500 rpm Spindle end diameter: ⌀ 30 mm Nominal compressed air pressure: 0.6 MPa Operating cycle frequency: 0 - 28 cycles/min Max. saw stroke: 100 mm Pjdpfx Ast Dxwash Ujgl Extraction port diameter: 1 x ⌀ 125 mm Air flow requirement (dust extraction system): 1300 m³/h Table height: 850 mm Weight: 160 kg The DMDK-35 circular saw is designed for cross-cutting wood. Maximum cutting width is 220 mm at a height of 35 mm. The saw is operated via a foot switch. The saw guard assembly is fitted with safety curtains. The workpiece is secured by two point clamps. This is an efficient saw with stepless feed speed adjustment in the range of 0–28 cycles/min. The saw is often used for manual removal of material defects. Net price, VAT invoice

Stanje: zelo dobro (rabljeno), Tucker Nimak MF180: Robotic spot weld guns for single-sided resistance spot welding The robotic spot welding guns for single-sided resistance spot welding from NIMAK are equipped with the latest medium frequency transformers, a controller featuring adaptive weld current regulation, and finely adjustable welding cylinders for smooth power delivery. The key is precise control, enabling reliable joining of materials without deformation or leaving marks on visible surfaces. Our systems excel at this task. Tucker Stanley Riveting Machine C-Frame With the Tucker® SPR system, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel, and high-strength steel, by combining two technologies in one modular system: clinching with semi-tubular rivets and solid self-piercing rivets. AEG SVS Welding Technology Electrode Milling Unit EF310-01E-S-D-Fix For milling spot welding electrodes Pgedpfjrqfk Aex Ah Uel Automatic rivet feeder With controller: The brain of any SPR system. It manages, processes, records, and communicates within an Industry 4.0 environment. The lung – compact, quiet, and fast rivet feeder for your SPR tool. Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and errors!) For further questions, we will be happy to answer you by phone.

Stanje: rabljeno, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The unit heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and serves as a universal solution for various applications. The display is user-friendly. Intended use: This heat-sealing press is particularly suitable for industrial use where precise temperature control and the option to use smaller sealing plates (140 x 140 mm) are required. Common fields of application include attaching patches, transfers, or embroidery to textiles. Key features: Robust and durable: The machine is designed for heavy-duty use and is popular not only in the textile industry but also in other sectors requiring high throughput at medium to high processing temperatures. High flexibility: The temperature range from 25 to 210°C and the adjustable timer from 1 to 240 seconds provide flexibility for a wide range of materials and applications. Podpfjwif Rgox Ah Ujgl Efficient: The air pressure range of 3 to 6 bar and air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat-sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25–210°C Timer: 1–240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3–6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Ytterbium Fiber Laser. The LSS5 M laser welding clamp complements the product range as a compact welding tool. With laser power from one to four kilowatts, integrated cooling technology and a user-friendly control unit, this combined welding and clamping tool is an ideal solution for welding high-strength steels, galvanized sheet pairings or aluminum. Trifocal Technology 3500W Laser Clamp Controller 3F Operating Mode: CW/Modulated Wavelength: 1070 nm Main Beam Laser Power: 3.0 kW Auxiliary Beam Laser Power: 2 × 0.25 kW Spot Size (depending on fiber and optics), µm: 250 – 600 Power Requirement: 3500 W Laser Power Laser Duty Cycle: 30% (with chiller) 3.5 kW Dimensions, Controller (W × D × H), mm: 608 × 808 × 1335 Weight: 250 kg LSS-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser Welding Clamp LSS-5M-3500-3F Condition: used Psdohh H Rmspfx Ah Ujgl Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors may occur!) If you have further questions, we are happy to assist you by phone.