Kolenski Vzvodni Stiskalnik nakup rabljenega (199)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 28.973 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.750 kg, skupna dolžina: 2.800 mm, skupna širina: 1.150 mm, skupna višina: 1.770 mm, moč: 132 kW (179,47 KM), volumenski pretok: 1.630 m³/h, vrsta hlajenja: voda, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, obratovalna temperatura: 201 °C, pritisk: 2,75 letvica, največja hitrost vrtenja: 12.874 obr/min, vrsta vhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, kompresor, 4 kompresorji Aerzen VM 30 z vijaki Uporabljeni so bili za pnevmatično praznjenje železniških vagonov. Proizvajalec: Aerzen Pgjdpfx Alsrkpp Hstjp Tip: VM 30 Volumski pretok: 27,17 m³/h (1630,2 m³/min) Povečanje tlaka: 2,75 bar Hitrost kompresorja: 12.874 obr/min Moč na gredi: 105 kW Moč motorja: 132 kW Končna temperatura: 201 °C Hlajenje stisnjenega zraka poteka z vodo preko cevno-snopnega izmenjevalca. Leto izdelave: 1998 Dimenzije: Dolžina: 2800 mm Širina: 1150 mm Višina: 1770 mm Teža: približno 2750 kg Obratovalne ure: Kompresor 1: 28.109 ur Kompresor 2: 28.222 ur Kompresor 4: 28.973 ur Redno vzdrževanje je izvajalo strokovno servisno podjetje! Od leta 2019 niso bili več v uporabi. Od takrat skladiščeni na suhem in ogrevanem prostoru.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 80.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.550 kg, skupna dolžina: 3.700 mm, skupna širina: 2.120 mm, skupna višina: 2.400 mm, proizvajalec motorjev: Siemens, moč: 315 kW (428,28 KM), volumenski pretok: 46 m³/h, obratovalni tlak: 10 letvica, raven hrupa: 72 dB, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, 2 kosa vijačnih kompresorjev s posebnimi napetostmi 6000 voltov Proizvajalec: Atlas Copco Tip: ZR 315-10-50/E Obratovalni tlak: 10 bar Pedpfxeywcr Re Altsgp Volumenski pretok: 46 m³/min Letnik: 1998 Obratovalne ure: približno 80.000 ur Hlajenje: vodno hlajenje Proizvajalec motorja: Siemens Moč: 315 kW Št. obratov: 1482 obr/min !!! Napetost: 6000 voltov !!! Dimenzije: Dolžina: 3700 mm Širina: 2120 mm Višina: 2400 mm Teža: 6550 kg

Stanje: novo, Leto izdelave: 2026, Dimenzije (dolžina/širina/višina) 1400x2450x2800 mm Skupni pritisk stiskanja 400 t Teža stroja pribl. 12.000 kg Kratkohodna pretočna stiskalnica WINTER TA513B-400T/1 - Površina stiskanja: 4000 x 1600 mm - Višina odprtine: 300 mm - Robustne jeklene grelne plošče debeline 45 mm z oljnim ogrevanjem - Skupna sila stiskanja: 400 t (6,3 kg/cm²) - 15 hidravličnih valjev Ø 125 mm - 2 kratka hidravlična valja Ø 80 mm - Hitrost zapiranja: 20–60 mm/s - Hitrost podajanja: 20 m/min - Moč grelnih plošč: 54 kW - Največja temperatura grelnih plošč: 120 °C - Skupna moč: 12 kW - Vključno z vhodnim in izhodnim trakom z varnostno vrvjo - Dimenzije: D = 14.000 mm, Š = 2.450 mm, V = 2.800 mm - Teža: pribl. 12.000 kg Pedjyk H Twspfx Altogp

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. Pedow R Ranopfx Altsgp The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Leto izdelave: 2026, stanje: novo, MSP 700 Belt Filter Press The entire system can be disassembled down to the base frame in just a few minutes! Fully automatic fruit and vegetable press with a closed working chamber to minimize oxidation. Two high-pressure nozzles are mounted underneath the machine, rotating continuously to ensure optimal performance. Thanks to the minimal distance between the pressing rollers and the juice collection tray, foam formation is no longer an issue. Most parts of the machine can be disassembled without tools, making cleaning easy. Fitted with heavy-duty, vibration-damping machine feet. Requires only minimal maintenance. Technical specifications: - Capacity: 700 kg/hour - Power requirement: 1.5 kW, 400 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200x1300x1200 mm - Filling height: 1200 mm - Wastewater connection: 40 mm - Dry matter discharge height: 470/770 mm - Weight: 890 kg - With integrated juice pump, collection tank, and level switch - With touchscreen control - Electronics conforming to IP65 Pgjdpfxjrz I Dko Altop - Extra high juice yield: 75% (depending on freshness and quality of the fruit) - Air requirement: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency converter: Speed adjustment for even more professional processing - High-strength, food-grade polyester pressing belt, fiber thickness: 2 mm, weave density: 6×16 fibers/cm², ½-twill weave (suitable for juicing without large fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Rotating brush roller for belt cleaning A high-pressure washer and air compressor are required for operation.

Stanje: dober (rabljeno), Leto izdelave: 1985, Proizvajalec: RADAELLI Model: 1000/S2 Leto: 1985 Stanje: Rabljeno Številka zaloge: 0388 Tlačna sila: 1000 t Število tlačnih točk: 2 Pgsdpfx Ajyrigpsltep Dimenzije drsnika: 2.820 x 2.200 mm Dimenzije mize: 3.150 x 2.200 mm Hod drsnika: 500 mm Odmik orodja pri PMI: 1.000 mm Nastavitev drsnika: 190 mm Udarcev na minuto: 15 ud/min Prisotna pnevmatska blazina

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: NAVA Model: 2MI1600DE/SE Podpfsx R U Nusx Altsgp Leto: 1998 Stanje: Rabljeno Skladiščna številka: 0367 Tlačna sila: 1.600 ton Število tlačnih točk: 4 Hod drsnika: 1.200 mm Hod zgornjega prebijala: 1.500 mm Dimenzija drsnika: 4.500 x 2.500 mm Dimenzija mize: 4.500 x 2.500 mm Pritiskalna blazina – skupna sila: 400 ton Hod spodnje pritiskalne blazine: 500 mm Izvlečni voziček: Prisoten spredaj

Stanje: rabljeno, številka stroja/vozila: 27742, vrsta vhodnega toka: trifazni, stiskalna sila: 200 t, širina mize: 1.200 mm, dolžina mize: 1.000 mm, širina plošče bata: 160 mm, tabela razdalj do bata: 500 mm, skupna masa: 23.600 kg, razdalja med stojali: 350 mm, nastavitev hidravličnega cilindra: 100 mm, maksimalna frekvenca hodov: 35 obr/min, Ekscentrična mehanska stiskalnica MINALI model 2MI 200, zmogljivost 200 ton, dvostebrična visoko toga konstrukcija, italijanska industrijska izdelava. Robustni in težki stroj (pribl. 23.600 kg), idealen za: Rezanje Preoblikovanje pločevine Upogibanje Lažja vtiskovanja Splošna mehanska dela Opremljen z: Hod batnice 250 mm Nastavitev kladiva 100 mm Delovna miza 1200 x 1000 mm 35 udarcev/min Glavni motor 20 KM Pgodpfjyutk Dsx Altep Pnevmatski sistem Centralizirano mazanje Upravljanje s pedalom in komandno ploščo Sistem proti ponovnemu udarcu Nujna zaustavitev Stroj je popoln z originalno električno omarico in tehnično dokumentacijo.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. The powder is loaded into a hopper and conveyed through a stainless steel tube from the feed hopper into the die. The adjustable punch compresses the powder, and the finished tablet is subsequently ejected from the machine. The machine operates in continuous motion using eccentric cams. It features a control panel equipped with a tablet counter. Up to 3,000 tablets can be produced per hour. The tablet press can be fitted with round, oblong, or oval tooling sets. Tool changes, including punch replacement, can be carried out easily and quickly. All parts in contact with powder are made of AISI 316 stainless steel. Technical Specifications Pgjdpfx Aeykukqsltsp Machine dimensions CPR1: 350 x 500 x 720 mm Net machine weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V, 50 Hz Power consumption: 1.20 kW Tablet ejection rate: max. 3,000 tabs/h Tablet diameter range: 4–20 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, številka stroja/vozila: P0220118, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 9 t, število valjev: 6, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.300 mm, višina obdelovanca (maks.): 200 mm, Oprema: CE označba, TEHNIČNE PODROBNOSTI Maks. dolžina obdelovanca: 2.500 mm Maks. širina obdelovanca: 1.300 mm Maks. višina obdelovanca: 200 mm Število cilindrov: 6 Skupni delovni pritisk: 90.000 N Delovni pritisk: 294.200 N/m² PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 3.000 x 2.070 x 1.670 mm Lastna teža: 4.000 kg OPREMA CE-označba Podpfxey Akuks Altogp

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.400 mm, skupna širina: 1.400 mm, število valjev: 8, TEHNIČNI PODATKI Pjdjy Akihepfx Altegp Število etaž: 1 Število cilindrov: 8 PODROBNOSTI O STROJU Vrsta ogrevanja: olje Dimenzije stroja (D x Š): 4.400 x 1.400 mm OPREMA Valj za lepilo Vhod/izhod

Stanje: skoraj kot novo (rabljeno), 11 zgornjih hidravličnih pritisnih elementov 5 sprednjih pnevmatskih pritisnih elementov Možnost izklopa posameznih cilindrov Največja delovna višina 124 cm Širina pritisnih elementov 16 cm Največja delovna dolžina 13 m Dolžina stroja 15 m Širina stroja 110 cm Višina stroja 270 cm Črpalka z močjo 3 kW Nastavljiva sila stiskanja Teža 5000 kg Pjdpfexrtl Usx Altogp

Stanje: rabljeno, Machine not operational – Control system not functioning Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column spacing front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram return force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressurization up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main drive motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-way flat guide for the ram - Hydraulic ram locking at top dead center - Separate control cabinet (200 x 50 cm) - Electrical control SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - Adjacent two-hand control console Pedsdzqptepfx Altegp - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons. The machine was used for straightening red-hot steel flanges. From insolvency – in good condition

Stanje: rabljeno, Single-column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clear opening at rear: 735 mm Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Shut height at 160 mm stroke: max. 355 mm (without bolster plate) Shut height at 20 mm stroke: max. 425 mm (without bolster plate) Pgodpfx Aou Rwa Ijltsp Strokes per minute: 60 Bolster plate surface: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping pin bore: 50 mm Motor power: 11 kW Mains connection: 400 Volt, 50 Hz - Hydraulic overload protection in the ram - ORTLINGHAUS pneumatic clutch-brake combination - Motorized ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear drive with enclosed oil-bath gearbox - Two pneumatic ram balance cylinders - Automatic central lubrication system WOERNER - Stroke release via electric foot switch or two-hand control desk - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram - UVV safety for hand-insertion operations Space requirements L x W x H: 2200 x 1600 x 3250 mm Weight: 8.3 tons Good condition

Stanje: rabljeno, Single-Column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very little used eccentric punch press in original condition Machine no. 5250686 Year of manufacture: 1986 As new condition Pressing force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Drop-through hole in table: 300 x 200 mm Table surface, intermediate plate: 740 x 560 mm Drop-through hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height max.: 275 mm (with intermediate plate) Installation height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 spm Motor power: 3 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic control - Spring-loaded single-disc brake operated by cam disk - Stroke release via pneumatic foot switch - Overload protection with shear plate in ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system BEKA Lubrication Technology Podoi A A Tbspfx Altsgp - Operating manual and pneumatic diagram available Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Very good condition, as new

Stanje: rabljeno, Okvirni stiskalnik NICO DUIN Pgjdpfxsytc Snj Altsp

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1593, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 400 t, hod: 300 mm, širina mize: 1.200 mm, dolžina mize: 800 mm, širina plošče bata: 1.150 mm, dolžina plošče bata: 600 mm, skupna masa: 44.000 kg, DMS 40 Mehanska stiskalnica 400 kN 25 udarcev na minuto Maksimalna zmogljivost 9500 kg Psdpfxjzhuk Rj Altjgp Maksimalne dimenzije orodja 1150x500 mm

Stanje: rabljeno, Sick gubalnik kapsul Pgjdpfx Alexyt Rgetop

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 2.375 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 175 t, hod: 160 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, širina mize: 3.400 mm, dolžina mize: 3.400 mm, skupna dolžina: 4.400 mm, skupna širina: 1.800 mm, skupna višina: 2.950 mm, skupna masa: 12.500 kg, Oprema: CE označba, BOSCHERT – GIZELIS G-BEND PLUS 3175 CNC Controlled Press Brake Machine ready for collection in June. 1. Features and Capabilities: ■ Modern machine frame design for optimal installation footprint. ■ Compact construction ensures high operational safety and resistance to external disturbances. ■ Additional, heavy-duty side wall reinforcements. ■ Maintenance-free, bilateral ram guiding system, independent for Y1 and Y2 axes. ■ State-of-the-art hydraulic system with proportional multi-valve configuration and pressure control, featuring an energy-saving STOP&GO operation mode. ■ Precision bilateral active ram displacement measurement system guaranteeing top bending accuracy. The system comprises min. 2 independent, high-precision linear scales mounted on brackets separated from the machine frame. Ram positioning accuracy: +/- 0.01 mm. Provides full electro-hydraulic frame synchronization (Y1, Y2). ■ Ram parallelism to the bending axis is secured by a double roller guide system on both sides of the inner frame, and by additional transverse ram reinforcement. ■ Cylinders and pistons made of high-strength steel; chrome-plated piston surfaces. ■ Machine and accessories are user- and service-friendly. ■ Machine prepared for future technical upgrades. ■ All numerically controlled axes powered by high-grade, maintenance-free AC servo motors. ■ Rear backgauge guided on both sides by double linear guides. ■ Extensive and versatile tooling system delivers high flexibility, allowing for processing a wide variety of parts. ■ Machine design and build meet all EU health and safety requirements (CE marked); in accordance with Directive 2006/42/EC. Pjdpfjy Am Nqjx Altjgp 2. Technical Data: Model / Data: 3175 Pressing force: 175 ton Max. working length: 3,400 mm Working length between side walls: 3,050 mm Throat depth in side walls: 400 mm Table-to-ram clearance: 615 mm Ram stroke: 350 mm Maximum backgauge range (X axis): 1,200 mm Ram speeds: Y, idle: 0–160 mm/s Y, under load: 10.0 mm/s Y, return: 0–140 mm/s Electrical equipment (others on request): 400 Volt / 50 Hz 1 flanged AC motor (inc. control equipment): 22 kW Approximate Dimensions: Height: ca. 2,950 mm Width: ca. 1,800 mm Length: ca. 4,400 mm Max. machine weight (depending on extras): 12,500 kg 3.6. 5-Axis CNC Backgauge System: X–ΔX–R–Z1–Z2 Axis X: Parallel travel of the backgauge beam Axis ΔX: Movable backgauge finger for non-parallel (skew) bends. Adjustment range: +/-175 mm (total 350 mm) Axis R: Backgauge beam height adjustment Axes Z1, Z2: Automatic finger travel along the backgauge beam All axes powered by AC servo motors. Two backgauge fingers mounted on the beam, with sheet support feature. Axes controlled by the machine DNC. Tooling: Punches: TOP.175.60.R08 60° R0.8MM H=175 L=5x525mm TOP.175.60.R08 60° R0.8MM H=175 L=1x495mm Sectioned: 25/30/35/40/45/50/100/170mm TOP.175.60.R08 60° R0.8MM H=175 L=1x500mm Sectioned: 100/300/100 mm Die: Multi-V Die M.460.60 V=10-16-22-35 (60°), L=4x835mm

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 13350686, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), stiskalna sila: 400 t, hod: 150 mm, število valjev: 10, premer cilindra: 120 mm, TEHNIČNI PODATKI Tlačna sila: 400 t Maksimalne dimenzije stiskanja: 1.500 x 4.400 mm Maksimalni hod: 150 mm Število cilindrov: 10 Pgjdpfx Alsyuxh Uetop Premer cilindra: 120 mm Material plošč: masivni aluminij Debelina zgornje in spodnje plošče: 90 mm PODATKI O STROJU Moč: 7,5 kW Napetost: 380 V Dimenzije in teža Transportne dimenzije (D x Š x V): 13.000 x 2.400 x 2.400 mm Skupna masa: 25.000 kg OPREMA Dovodna in izhodna tračna transporta Ogrevanje z oljem Oljni kotel

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 54 A, vhodna frekvenca: 50 Hz, kapaciteta rezervoarja za olje: 300 l, model krmilnika: DNC 900 PS, delovna širina: 4.050 mm, upogibna sila (maks.): 175 t, Ponujamo ta rabljeni upogibni stroj EHT VARIOPRESS 175-40, letnik izdelave 1998. Tip stroja: VARIOPRESS 175-40 Serijska številka: 211030 Letnik izdelave: 1998 Delovna dolžina: 4050 mm Prisilna sila: 1750 kN Kapaciteta olja: 300 l Frekvenca: 50 Hz Vrsta toka: 3~ Obratovalna napetost: 400 V Krmilna napetost: 24 V Nazivni tok: 54 A Glavno varovalo: 63 A Moč glavnega motorja: 15 kW Št. električne sheme: 11702 Vrsta krmiljenja: DNC 900 PS Za vprašanja ali dodatne informacije nam pišite ali nas pokličite. Podpfx Aoyw Rbyoltegp

Leto izdelave: 2026, stanje: novo, Tračni stiskalnica PT-1050 je naprava za pridobivanje jabolčnega mošta. Postopek poteka med trakom stroja in ustrezno razporejenimi stiskalnimi valji. Iztisnjen sok se črpa v rezervoar pasterizatorja. Tehnični podatki: Zm ogljivost: do 2000 kg jabolk/h Izplen soka iz stisnjenih jabolk: do 75 % Vgrajena moč: 2,5 kW, 230 V Mere D × Š × V (mm): 2650 × 1650 × 1650 Teža: 1500 kg Širina traku: 750 mm Pedpfx Aeukq Taeltegp Hitrost traku: nastavljiva Posoda za sok s sitom, velikost očes Ø 2 mm Črpalka za sok

Leto izdelave: 2026, stanje: novo, Trakast stiskalnik PT-1200 je naprava za pridobivanje jabolčnega mošta. Postopek stiskanja poteka med trakom naprave in ustrezno razporejenimi stiskalnimi valji. Iztisnjen sok se črpa v rezervoar pasterizatorja. Tehnični podatki: Kapaciteta: do 4000 kg jabolk/uro Izplen soka iz stisnjenih jabolk: do 75 % Podpfsukq T Hox Altjgp Vgrajena moč: 3,4 kW, 230 V Dimenzije D × Š × V (mm): 3100 x 2190 x 1650 Teža: 2000 kg Širina traku: 1200 mm Hitrost traku: nastavljiva Posoda za sok z sitom Črpalka za sok

Stanje: generalkompletno obnovljen (rabljeno), Rabljeno, popolnoma obnovljeno, 1 leto garancije, format plošč 250 x 250 mm ali 300 x 300 mm, 15 plošč, odprt iztek, debelina pogače 20 mm, maks. tlak 10 bar, prostornina 10 litrov, filtrirna površina 1,5 m², mere 1300 x 500 x 1300 mm, teža 300 kg, po izbiri z ročno ali motorno hidravliko, z ali brez črpalke za napajanje in cevovodom, možen tudi najem majhne preše za poskuse. Podofbbpwspfx Altsgp

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1990, Various chamber filter presses from Rittershaus & Blecher, Netzsch, and Passavant available. Plate sizes: 1200 x 1200 mm and 1500 x 1500 mm; number of polypropylene plates: 40–145; capacity: 1,000–4,500 liters; length approx. 6–13.6 m. All presses require refurbishment and will be sold with a 1-year warranty after reconditioning. A piston diaphragm pump for feeding can be offered as an option. Location: 58762 Altena. Pgedpfsgpxg Sex Altjp