Holzkraft Vsa 48 L nakup rabljenega (66.941)

Stanje: rabljeno, prevoženi kilometri: 887.015 km, moč: 310 kW (421,48 KM), prva registracija: 10/2012, vrsta goriva: dizel, lastna masa: 9.730 kg, največja dovoljena obremenitev: 16.270 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.900 mm, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, nizka raven hrupa, parkirni grelec, računalnik na krovu, servovolan, spojka prikolice, spojler, tempomat, zapora diferenciala, Vehicle location: Bovenden, StreamSpace, Active Brake Assist, Mercedes PowerShift 3, Large cab, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, electric sunroof, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, roof spoiler, lift + lower function, differential lock, fog lights, work lights, stowage box, air suspension, trailer coupling air+light, aluminum tank, low noise G1, underrun protection, side aluminum underride guard, green emission sticker. Wheelbase: 4900 mm. Body: Mildner BDF swap chassis, volume front axle air-suspended, 8t front axle, rear axle crown wheel 440 hypoid 13t, 7.5t lift axle (relievable), electronic braking system with ABS and ASR, disc brakes on front and rear axles, secondary water retarder, condensate monitoring for compressed air system, aluminum front underride guard, SoloStar Concept, residual heat utilization, auxiliary hot water heater, extra thermal insulation, electric lifting roof, hill-start assist, StreamSpace, comfort locking system, economy driving program, Mercedes PowerShift 3, pre-installation for toll recording, fuel tank capacity: 500l, on-board diagnostics, Active Brake Assist 2, ESP, anti-roll control assistant, lane-keeping assistant, distance control assistant, attention assistant, driver airbag, refrigerator, Safety Pack Top, Climate Pack. Hsdevhiyqjpfx Aiqeu Matching swap body trailer -85015- available for an additional €6,900 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, Hydraulic unit, hydraulic pump, universal hydraulic power unit, hydraulic station - Manufacturer: HAWE, hydraulic power unit with chassis - Motor: kW - Pressure: up to 200 bar Hedpfx Aispz Sf Nsqou - Flow rate: 48 l/min - Individual components: see photos - Dimensions: 1580/1040/H1200 mm - Weight: 632 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Der Labcycler Gradient verfügt über die gleichen technischen Merkmale wie sein Pendant, der Labcycler Basic. Zusätzlich ist die Gradient-Funktion aktiv, die für Thermoblock 48, Thermoblock 96, Thermoblock 96 alu und Thermoblock 384 genutzt werden kann. Temperaturgradienten von 8 bis 24 Zonen sind möglich, um die optimale Annealing-Temperatur zu ermitteln. Thermoblock 96 und 384 eignen sich für den Hochdurchsatzbetrieb. Der Triple Block kann im Labcycler Gradient ohne Gradient-Funktion eingesetzt werden. Das Paket Labcycler Gradient mit Thermoblock 96 und Triple Block stellt ein interessantes Werkzeug für alle Standardlabore dar. Bestellinformationen Der Labcycler Gradient muss in Kombination mit mindestens einem Thermoblock bestellt werden. Zusätzlich können ein zweiter oder mehrere Thermoblocks geordert werden, da das System ein Schnellwechsel-System für Thermoblocks bietet. Ein Thermoblock kann innerhalb weniger Sekunden gewechselt werden. Der Labcycler Gradient arbeitet an allen globalen Netzspannungen. Technische Daten Netzspannung: 85 V bis 265 V, 50 bis 60 Hz Leistungsaufnahme: maximal 350 W, Standby 25 W Geräuschpegel: Leerlauf 38 dBA, typisch 44 dBA, maximal 48 dBA Display: TFT-Farbdisplay, hintergrundbeleuchtet, ¼ VGA, 5,7" Diagonale, 320 x 240 Pixel, Touchscreen Beheizter Deckel: programmierbar, Anpressdruck 0 bis 120 N, Temperatur Raumtemp. bis 110 °C Tastatur: numerische und virtuelle Tasten Sprachen: Englisch, Deutsch, Spanisch Programme: 680 Standardprogramme bzw. mindestens 3000 Schritte; die letzten 16 Programmabläufe sind jederzeit einsehbar, Neustartfunktion, programmierte und manuelle Pausen Passwortschutz: konfigurierbar für bis zu 64 Benutzer Hodpfsu Tkbnsx Aiqou Administration: Administratorrechte zum Lesen & Schreiben Kopierfunktion: Intersystem-Kopierfunktion mit Labcycler 48 & 192s, Labcycler Basic und Labcycler Gradient Guter Zustand. Bitte beachten Sie auch unsere weiteren Angebote.

Stanje: rabljeno, Leto izdelave: 2022, Rabljen stroj Letnik izdelave: 2022 nerabljen tehnični podatki: dimenzije mize za obdelavo: 630 x 1.000 mm širina stroja: 630 mm glavni motor: 9 kW maks. višina obdelave: 300 mm maks. odvzemanje materiala: 8 mm maks. dolžina obdelave: 210 mm min./maks. višina obdelave: 3,5 / 300 mm Hsdpfsz Dlmljx Aiqeu pogonski dvig mize za obdelavo z 2 hitrostmi hitrost podajanja: 5 / 8 / 12 / 18 m/min število vrtljajev: 4.500 vrt/min premer stružnega valja: 120 mm število Tersinih rezil: 4 kos nastavljiv pritisk valja sprednji valj za podajanje z diagonalnimi zobmi izmetni valj z gumijasto oblogo premer priključka za sesalnik: 150 mm motor 400 V / 50 Hz: 9,0 kW teža: 750 kg razpoložljivost: kratkoročno lokacija skladišča: Saška-Anhalt

Stanje: rabljeno, prevoženi kilometri: 688.020 km, moč: 335 kW (455,47 KM), prva registracija: 11/2006, vrsta goriva: dizel, lastna masa: 11.350 kg, največja dovoljena obremenitev: 14.650 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, zavore: stalna plinska ročica, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, dodatne luči, greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, nizka raven hrupa, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, zapora diferenciala, Vehicle location: Bovenden, on company premises. 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, wood trim, Telligent gearshift, 16-speed manual, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, fog lights, work lights, leaf/air suspension, last axle liftable and steerable, tow hitch air+electric, aluminum tank, underbody protection, side aluminum underrun protection, hydraulic cross-lock, roof hatch, green environmental sticker. Hodpfsvhix Tsx Aiqeu Wheelbase: 4800 mm. Body: 20t Meiller RK 20.70 hooklift system for containers up to 7m. Disc brakes on front and rear axles, front axle 7.5t, rear H6 axle 13t with 440mm crown gear. Telligent trailing axle, hydraulically steered and liftable. Telligent braking system with ABS and ASR, additional stabilizer for rear/trailing axle, PSM, hill start assist, pre-installation for toll recording, distribution cockpit, Telligent gearshift II, pollen filter, reverse warning system, transmission oil cooling, fuel tank capacity: 400l, PTO MB 124-10c MPA N-/M rpm, hooklift system. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Hjdpfx Aiecnwydsqou Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Hjdjr A Eq Repfx Aiqou Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Hodsbuldyjpfx Aiqeu Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Leto izdelave: 2022, stanje: rabljeno, Rabljen stroj Letnik izdelave: 2022 Oprema in tehnični podatki: - Omogoča eni osebi enostavno nalaganje plošč na okvir platforme in njihovo obračanje iz navpične v vodoravno lego. - Uporaba na strojih za rezanje plošč ali velikih formatov, na regalih ali na poti med delovnimi postajami. - Obračalni okvir z dvema blokadama v navpični in vodoravni legi. - Prilagoditev višine mize na želeno delovno višino s pomočjo nožne hidravlike. - Konstrukcijski princip z enostavno gibljivo škarjasto mehanizmo zagotavlja, da je platforma dvigana in spuščana v popolnoma vzporedni legi. - Stabilni podporni valji na spodnjem nosilcu in več večsmernih valjev zagotavljajo ergonomsko enostavno gibanje. - Protiteža na spodnjem okvirju za varno stabilnost in največjo stabilnost pri premikanju mize. - Nogi pedala za upravljanje delovne mize je v celoti dostopen. - Enostavno manevriranje zaradi štirih vrtljivih koles s premerom 125 mm. - Dve kolesi opremljeni z zavorami. - Enostavna montaža in demontaža okvirja za obračanje plošč na osnovnem okvirju platforme z nekaj preprostimi koraki. - Izpolnjuje varnostne kriterije standarda EN 1570-1. - Nosilnost 300 kg - Višina mize maks. 1010 mm - Višina mize min. 400 mm - Širina obračalnega okvirja 1800 mm, dolžina 1500 mm - Premer koles 125 mm Hsdpfx Ajzk Nqdsiqou Mere: 1200 x 740 x 400 mm Teža: približno 80 kg Teža obračalnega okvirja: 10 kg Razpoložljivost: v kratkem času Lokacija skladišča: 63934 Röllbach

Stanje: delavnici obnovljeno (rabljeno), Mechanically refurbished machine with new LTG control system StoreControl L External dimensions: Installation height: 8,760 mm Installation width: 2,778 mm Installation depth: 2,800 mm 2 identical machines available 48 carriers, each with a load capacity of 340 kg with clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 20,000 kg Access opening starts at 900 mm above finished floor level, then 750 mm high Colour scheme GREY / BLUE, carriers Sendzimir galvanized, surfaces cleaned, signs of use possible Performance data: Vertical drive 1 x 3.0 kW / 400 Volt Horizontal drive 1 x 0.37 kW / 400 Volt Hodpfx Aed Rh Dvoiqju Subject to errors, technical modifications, and detail variations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination Machine 4-in-1 HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at parallel fence: 820 mm Saw blade tilt: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./Max. working height: 3 / 230 mm Hjdpfx Aisci Tvheqsu Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. cutter diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables Hsdpfx Aisvwd U Ijqou - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, delovna širina: 1.650 mm, skupna masa: 8.000 kg, velikost zadnje pnevmatike: 15/55-17, 48 m³, 6 grebenov, hidravlični krmilni sistem, 7 rezil. Hodpfx Aszrzd Ssiqou

Stanje: novo, Leto izdelave: 2026, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Hedeff Hdfjpfx Aiqju Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Hjdpfocnw U Dox Aiqou Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment Hsdpfx Aiezlbq Sjqeu - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2018, Nosilnost 350 kg, minimalna višina mize 757 mm, maksimalna višina mize 1157 mm, dolžina mize 3000 mm, širina mize 1000 mm. Dolžina ca. 3010 mm, širina/globina ca. 1040 mm, višina ca. 1157 mm. Priporočena zmogljivost odsesavanja 2200 m³/h, število priključnih nastavkov 3 x 220 V, premer priključnih nastavkov 140 mm. Teža: 130 kg. Skladišče: Nattheim. Hsdpfxoxnlavs Aiqou

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414 Hsdpfsvwga Hox Aiqsu

Stanje: rabljeno, Leto izdelave: 2023, Rabljen stroj Letnik proizvodnje: 2023 Stanje: kot nov, stroj ni bil uporabljen Oprema in tehnični podatki: - Število vrtljajev vretena: 3.500 / 6.000 / 8.000 / 10.000 vrt/min - Nagib vretena: 0 do -45° - Uporabna dolžina vretena: 125 mm - Premer vretena: 30 mm - Kazalnik vrtljajev: LED-prikaz na sprednji strani stroja - Največji premer orodja (standard): 240 mm - Največji premer orodja, ki ga je mogoče spustiti: 230 mm - Največji premer orodja za profilno frezanja: 240 mm - Največji premer orodja za čelnično frezanja: 320 mm - Dolžina delovne mize: 1.200 mm - Širina delovne mize: 530 mm - Višina mize: 900 mm - Dolžina drsnega nosilca: 1.200 mm - Širina drsnega nosilca: 360 mm - Višina drsnega nosilca: 142 mm - Premer odvodne cevi: 2 × 120 mm - Moč pogonskega motorja: 5,0 kW - Napetost: 400 V Hjdpfxozk Nn Ao Aiqju - Frekvenca omrežja: 50 Hz Mere: 1.200 × 2.000 mm Teža: 510 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: rabljeno, prva registracija: 12/2000, barva: sivo-črna, Leto izdelave: 2000, vrsta prenosa: drugo, REGISTRACIJA: XA236BD NASLOV: PRIKLOPNA PRIKOLICA ATLAS ZA PREVOZ KONTEJNERJEV ŠTEVILKA: 26R13 LETO: 12/2000 ŠTEVILO OSI: 2 MEDOSNA RAZDALJA: 4900 MAKSIMALNA DOLŽINA: 8,960 m DRŽAVA: Italija NOSILNOST: 16400 kg - PRIKLOPNA PRIKOLICA: 20000 kg pri polni obremenitvi VRSTA NADGRADNJE: za prevoz kontejnerjev MODEL NADGRADNJE: ATLAS ADR: da DOLŽINA KAROSERIJE OD: 5,00 m + 0,20 m DO: 7,00 m + 0,20 m VZMETENJE: listno ZAVORE: bobnaste PNEVMATIKE: 265/70 R19.5 Hjdpfx Aisz Hf Rvsqju OPREMA - delovanje s hidravličnimi cevmi vlečnega vozila - 4 notranje sponke + 4 zunanje sponke PRENOVLJENO: ne REVIZIJA: 30.09.2025 STANOVANJE PNEVMATIK: 30 % CENA: 4.650,00 € + DDV. Pridržana pravica do sprememb in/ali napak. Navedene cene ne vključujejo DDV. Za posodobljeno primerjavo cen in pogojev se obrnite na komercialnega predstavnika. Za več informacij: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA deluje na področju prodaje in nakupa industrijskih in gospodarskih vozil, s posebnim poudarkom na sektorju ravnanja z odpadki. Specializirani za tovornjake, priklopne prikolice in opremo za prevoz kontejnerjev. Ponujamo širok izbor vozil, ki so na voljo za takojšen odvoz, z več kot 50 tovornjaki in več kot 150 nadgradnjami, kontejnerji z in brez žerjva za prevoz kontejnerjev. S.E.&O. Glede na veliko število oglasov in podrobnosti, Aurora vas naproša, da preverite pravilnost podatkov pri prodajnem osebju.

Stanje: novo, Description Surface and Thickness Planer with TERSA Quick-Change Cutter System - Equipped with TERSA cutter block for lightning-fast knife changes - TERSA cutter system ensures particularly quiet operation - Helically toothed steel infeed roller for consistent and even feed of timber - Exceptionally long, one-piece surfacing tables for easy planing of workpieces - Large planing fence remains in position when opening the surfacing tables - Surfacing tables open towards the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Special Features - Work tables made of stress-relieved cast iron, guaranteeing lasting flatness and high resistance to distortion - Table lips ensure silent operation Equipment Details TERSA Cutter Block - No more adjustments or screwing required - Knife replacement in seconds - Self-locking - Exceptionally quiet - Perfect planing result Extraction Hose Connection - Both surfacing and thicknessing extraction ports face the same direction Hjdou Diwlopfx Aiqju - Hose connects from one side only; no need for a hose to run around the machine Drive System - Rugged chain drive - Drive wheels made of steel - Heavy-duty cast iron bearing mounts Planing Mechanism - Heavy anti-kickback fingers prevent workpiece kickback - 3-knife TERSA cutter block ensures optimal planing finish Material Feed - Helically serrated steel feed rollers guarantee a consistent, even material feed with no impressions - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data Surfacing table overall length: 1510 mm Surfacing working width: 300 mm Surfacing depth of cut, max: 4 mm Thicknessing table dimensions: 565 x 300 mm Thicknessing working height, min: 3 mm Thicknessing working height, max: 230 mm Thicknesser feed speed: 7 m/min Cutter block speed: 5200 rpm Cutter block diameter: 72 mm Number of knives: 3 pcs. Electrical connection: 400 V Motor power: 4.0 kW Extraction port diameter: 2 x 120 mm Weight: 270 kg Long-hole mortising unit (optional): Table size 470 x 220 mm Long-hole mortising unit travel, cross/longitudinal: 160 mm / 110 mm Long-hole mortising unit vertical travel: 120 mm Scope of Delivery & Equipment - TERSA cutter block - Anodized aluminium planing fence

Stanje: rabljeno, prevoženi kilometri: 249.000 km, moč: 205 kW (278,72 KM), prva registracija: 06/2004, vrsta goriva: dizel, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 11/2026, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 5, skupna širina: 2.500 mm, skupna višina: 3.430 mm, Leto izdelave: 2004, Oprema: pogon na vsa štiri kolesa, žerjav, Grove GMK 2035, year of manufacture 2004, exceptionally well maintained, 48 meters: 29 meters main boom, 19 m fly jib, new UVV inspection, new TÜV inspection. For sale is an excellently maintained Grove GMK 2035 (German specification), second owner, complete service history, well-cared for and reliable condition, professionally operated, regularly serviced. Technical Highlights & Features Grove GMK 2035 – Year: 2004 * Operating hours: approx. 21,400 h Hedsz Hd Hispfx Aiqeu * Original 48-meter ship fly jib * Two-stage hydraulically folding jib, can be mounted without needing counterbalance * Telescopic main boom: up to 29 m * 4x4 all-terrain chassis * Mercedes powertrain (robust, reliable) Maintenance Carried Out Complete rope winch overhaul – cost €14,800, with invoices available * One of the most critical components on the GMK 2035 – fully serviced and inspected New UVV inspection, all safety-related tests recently completed New TÜV inspection, full vehicle and crane inspection newly approved Meticulously maintained, fully documented service history with records * No outstanding repairs * Mechanics, hydraulics, boom and electrics in very good condition Documentation * All inspection reports readily available * Load charts for main boom and fly jib * Winch documentation and €14,000 invoice as proof * Complete German machinery history * Operation manual and service booklets Condition Technically: very good * Hydraulics: dry, clean, powerful * Boom: in very good condition, no play * Visually: clean and well cared-for * Fully operational, no investment necessary – ready for immediate use Despite utmost care, errors in this advertisement cannot be ruled out. Subject to prior sale and changes.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 1.442 h, nosilnost: 800 kg, dvižna višina: 1.580 mm, vrsta goriva: električni, gradbena višina: 1.860 mm, vrsta prenosa: samodejen, skupna masa: 679 kg, lastna masa: 495 kg, skupna dolžina: 1.777 mm, barva: rdeča, prevoženi kilometri: 1.442 km, prva registracija: 09/2016, vzmetenje: drugo, število sedežev: 1, voznikova kabina: drugo, emisijski razred: noben, gorivo: elektrika, The BT SWE 080L is a compact and reliable pedestrian stacker, specifically designed for professional use in warehouse and logistics environments. Thanks to its robust construction and proven BT technology, this vehicle offers an ideal combination of performance, efficiency, and durability. Equipped with an automatic transmission, the stacker enables particularly comfortable and precise operation. Travel and lift movements can be controlled with great sensitivity, ensuring safe and efficient working even in narrow warehouse aisles. This significantly streamlines workflow, especially during frequent transport and storage tasks. With only 1,442 operating hours, the vehicle is in excellent working condition, making it an attractive solution for companies seeking reliable warehouse equipment at economical terms. First registered in September 2016, it features modern technology and a long-lasting design, built for daily use. Hsdpfeyigptsx Aiqou Another advantage is the battery from 48/2022, which guarantees stable power supply and a high level of operational readiness. This ensures reliable work cycles and efficient usage in everyday operations. The BT SWE 080L also impresses with its compact design and high maneuverability. These characteristics make it an ideal solution for fast and safe pallet handling as well as internal material transport. Sale to business customers only (agriculture, freelancers, small and large enterprises) or export. Subject to errors and prior sale.

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Hedpfx Ascnxayjiqsu Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: novo, Leto izdelave: 2026, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Mains frequency: 50 Hz Sanding Unit Hjdpfoff Hdbjx Aiqou Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.