Günther Dp15/10 nakup rabljenega (29.762)

Stanje: dober (rabljeno), Included in the delivery: Fgjdpfei A Ik Ijx Aplsb 01x Mounting bracket, used Surface: hot-dip galvanized Weight: 2.26 kg | each Mounting plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) Mounting flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Inventarna št.: 503657 Tip stroja/opreme: Naprava za regulacijo vročih kanalov Proizvajalec: Günther Tip: DPT 5 Leto izdelave: 2017 Fsdexx Tmrepfx Aplogb Priključne vrednosti: Napetost na priključku: na fazo 200–250 V AC, 50 do 60 Hz, tipična zvezdna vezava Zvezdna vezava: 3-fazno omrežje z ničlo, 200–250 V med L in N Trikotna vezava: 3-fazno omrežje brez ničle, 200–250 V med dvema fazama Priključek bremena: IOA na kanal (varovalko 10A zelo hitra = FF 10A) ter po en kanal na fazo z 16A (glej največjo obremenitev faze!). Obremenitev faze (5 kanalov na fazo): največ 25A Zaščitni razred: IP 20 Dimenzije (Š x V x G): 468 mm x 142 mm x 345 mm Teža: 13,0 kg Barva ohišja: siva/modra (RAL 9018 / RAL 5015)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine/Device Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical Fgodpfx Ajxx Ti Teplob Star connection: 3-phase network with neutral, 200–250 V between L and N Delta connection: 3-phase network without neutral, 200–250 V between two phases LOAD CONNECTION 16A per channel (fuse 16A super rapid “FF 16A”) Phase load: max. 32A Phase L1: channels 1–6, 19–24 Phase L2: channels 7–12 Phase L3: channels 13–18 MAXIMUM OUTPUT DPT 6: 7.3 kW (1 x 32A) TYPE OF LOAD Only resistive loads permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free NO contact (max. 230V/1A, not fused) LOWERING INPUT Connection for a potential-free NO contact MAINS CABLE CEE plug 32A (prepared for star wiring) HOT RUNNER CONNECTION Power connection: 2 x 24-pin HAN-E socket connectors Thermo connection: 2 x 24-pin HAN-E pin connectors FUSES Load output fuse: FF 16A, 6.3 x 32mm, type Schurter SA Control fuse slow blow 2A, 5 x 20mm INTERFACES RS232, TTY (RS422, RS485) Interface protocols for Arburg, Mannesmann, Krauss-Maffei, Engel, and others available. OUTPUT Continuous via pulse group controller CONTROL RANGE Adjustable from 0–700°C / 0–999°F LOWERING Adjustable from 0–200°C / 0–360°F BOOST Adjustable from 0–100°C / 0–180°F SAFETY SHUTDOWN Adjustable from 0–700°C / 0–999°F DATA BACKUP Power failure safe, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C AIR HUMIDITY Storage: 30% – 80%, non-condensing Operation: 40% – 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (WxHxD) 362mm x 180mm x x mm Approx. 16.0 kg HOUSING COLOR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Fodpsw E Hpvjfx Aplegb Year of manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: Fedpfx Aow H I R Roplegb • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: novo, Leto izdelave: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 mm (W) x 1300 mm (H) x 900 mm (D) External dimensions: 980 mm (W) x 2100 mm (H) x 1600 mm (D) Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter surface area: 22.5 m² Fan: Aluminium Fan noise level: 74 dBa Air consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available on request Fgodpfxsb Al Sbo Aplsb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 1.000 kg, vhodna frekvenca: 50 Hz, nazivna (navidezna) moč: 250 kVA, vrsta izhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, 6 months warranty Fgsdpfswnfupex Apljb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 1.410 kg, vhodna frekvenca: 50 Hz, nazivna (navidezna) moč: 500 kVA, vrsta izhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, 6 months warranty Fgjdpfswnfx Uox Apleb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Modular plant growth chambers Fitotron®, type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300 l Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers are based on modular construction. Individual modules can be added or replaced as needed, allowing adaptation to various applications. They are suitable for plants with high light requirements such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% r.h. Fresh air supply up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.h.: approx. 0.8 kW Technical data for climate tests with irradiation: Temperature range: +10°C to +45°C with lights on Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% r.h. Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition 50 mm pipe feedthrough Air cooling Refrigerant: R404A Fgsdsv Ivn Uepfx Aplob Weight: approx. 480 kg + 130 kg lighting module

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Modular plant growth chambers Fitotron®, type HGC 1014 V including HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300L Simpac control system Network connection USB interface The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as required, allowing adaptation to a wide range of applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4-plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% rH Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% rH: approx. 0.8 kW Performance data for climate tests with irradiation Fgjdpfsv Ivnzsx Aplob Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% rH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: -10°C to +45°C for temperature testing Test chamber volume: approx. 1300 L Simpac controller Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added or replaced as needed, allowing customization for various applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temperature deviation over time: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ±3 to 5% r.h. Fresh air supply up to 7.5 m³/h Power consumption without fresh air mode at 25°C / 75% r.h.: approx. 0.8 kW Specifications for climate tests with irradiation: Temperature range: +10°C to +45°C with lights on/+10°C to +45°C Temperature deviation over time: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ±3 to 5% r.h. Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm x Depth 750 mm x Width 1270 mm External dimensions: Height 1985 mm x Depth 980 mm x Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, excellent condition Pipe port: ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module Fgjdpfx Ajv Ivn Ieplob

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, V ponudbi je salamurni injektor znamke Günther PI-17 Nadel, letnik 2000. V dobrem stanju, 380V, 16A. Dodatne informacije na zahtevo. Fgsdpfx Apew R Tv Seljb Plačilo z gotovino ali predplačilo. Prodaja samo pravnim osebam, brez garancije, brez odgovornosti za stvarne napake.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, A brine injector by Günther, model PI-17 Needle, is being offered. The machine is in good condition; the impeller as well as the pressure gauge are new. 380V, 16A. Further details available upon request. Payment in cash or advance payment. Fodpfev Saflsx Aplsgb Sale to commercial customers only. No guarantee, no warranty.

Stanje: rabljeno, Nordson Problue vroča talilna črpalka Model – Problue 10 Možnost priklopa do 6 cevi Fgsdpjwq Suuefx Aplsb Kapaciteta rezervoarja: 10 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1963, skupna masa: 3.000 kg, skupna dolžina: 3.900 mm, skupna širina: 800 mm, skupna višina: 1.850 mm, TEHNIČNE PODROBNOSTI Hod: 1.500 mm Kapaciteta: 10 t Moč motorja: 7,5 kW PODROBNOSTI STROJA Krmiljenje: konvencionalno Fedpfx Apjy Himmslegb Dimenzije & Teža Dimenzije (D x Š x V): 3.900 x 800 x 1.850 mm Lastna teža: 3.000 kg Transportni paketi: 2 OPREMA Dokumentacija

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.800 kg, Leto izdelave: 2024, obratovalni tlak: 400 letvica, številka stroja/vozila: S10 00164, Škarje so bile uporabljene samo za en projekt! TEHNIČNE PODROBNOSTI Delovni tlak: 400 bar Pretok olja v cilindru: 200 L/min Tlak rotacije: 110 bar Pretok olja pri rotaciji: 20 L/min PODATKI O STROJU Teža: 1.800 kg Kompatibilni bagri: teža roke min. 10 t, maks. 20 t Fodpfx Apsy Ia Iwjlogb

Stanje: novo, Screw Compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor system including refrigerated dryer and 270 L receiver tank. Belt-driven. Space-saving. Cost-effective. Simple operation thanks to Infologic² Basic control. Efficient compression stage. The perfect solution for industrial and craft businesses. Outstanding compressed air quality. Integrated refrigerated dryer. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerated dryer: Integrated, refrigerant R513A Receiver tank: 270 L horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 L/min Fodpfshun Tzsx Aplogb Including timed condensate drain Dimensions (L x W x H): 1500 x 1350 x 600 mm

Stanje: novo, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Simple operation. The perfect solution for industrial and craft businesses. Outstanding compressed air quality. Integrated refrigeration dryer. Fedpfx Apsixt H Nsljgb Sound-insulated screw compressor with V-belt drive mounted on a 270 l air receiver, featuring an integrated refrigeration dryer, built-in cyclone separator, electronic condensate drain, and graphic C55 controller. Detailed specifications: Compression system: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt-driven Control: Fixed speed Controller: Aircontrol 5.0 Refrigeration dryer: Integrated, refrigerant R513A Filtration: Including cyclone separator Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min./max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 10.2 kW Motor rated power; IP55: 7.5 kW Oil volume: 4 l Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Air receiver capacity: 270 l

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 13 mm Upogib 10 mm Premer zgornjega valja 300 mm Premer spodnjega valja 270 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Dimenzije stroja 5600 x 1800 x 1500 mm Teža stroja cca. 8.800 kg Dodatna oprema: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Konstrukcija stroja iz jekla - Ločena nadzorna konzola - Dve hitrosti Fgedpfeyv Nh Nex Apljb - Vsi valji na krogličnih ležajih - Nosilna in preklopna ležaja zgornjega valja se upravljata iz kontrolne enote. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konična nastavitev valjev preko nadzorne enote - Osrednji valji so poganjani s hidravličnim motorjem in planetnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine: 1050 mm Debelina pločevine: 3,3 mm Upogibna zmogljivost: 3,0 mm Premer valjev: 90 mm Najmanjši premer: 130 mm Fgsdeyv Nfbspfx Aplsb Skupna priključna moč: 1,1 kW Teža stroja: ca. 570 kg Prostorske zahteve: ca. 2100 x 800 x 1130 mm Oprema: - Asimetrični 3-valjni okrogli stroj z motornim pogonom - Zgornji valj izklopljiv - Naprava za konično upogibanje - Glavni motor z zavoro Posebna oprema: - Motorno nastavljanje zadnjega valja - Digitalni prikaz nastavitve zadnjega valja - Indukcijsko kaljeni valji

Stanje: novo, Širina pločevine: 1050 mm Debelina pločevine: 1,8 mm Upogibanje: 1,5 mm Premer zgornjega valja: 70 mm Najmanjši premer upogiba: 105 mm Skupna potrebna moč: 1,1 kW Teža stroja pribl.: 320 kg Fgedpfxeyv I U Ij Apleb Potrebni prostor pribl.: 1700x700x1100 mm Oprema: - Asimetrični trivaljni okroglinski stroj z motornim pogonom - Zgornji valj z možnostjo nagiba - Glavni motor z zavorno napravo Posebna oprema: - Motorizirano nastavljanje zadnjega valja - Digitalni prikaz za zadnji valj - Indukcijsko kaljeni valji

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 13 mm Upogibanje 10 mm Premer zgornjega valja 230 mm Premer spodnjega valja 210 mm Premer stranskega valja 190 mm Skupna potrebna moč 7,5 kW Teža stroja cca 4.750 kg Prostorske zahteve cca 4150x1400x1300 mm Dodatna oprema/konfiguracija: - Naprava za stožčasto krivljenje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Ležaj za odpiranje in podporo zgornjega valja se upravlja iz upravljalne enote Ko se ležaj odpre, se valj samodejno dvigne. Fgedoyv I Ubspfx Aplsb - Stožčasta nastavitev valjev preko upravljalne enote - Centralni valji so gnani s hidravličnim motorjem in planetarnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine 1050 mm Debelina pločevine 1 mm Fedpfx Apoyvvn Aologb Premer valjev 56 mm Potrebni prostor cca 1600 x 700 x 1050 mm Oprema: - Zgornji val ročno izklopljiv Posebna oprema: - Kaljeni valji

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Fsdpfxoyhbt Hs Aplsgb Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line

Stanje: dober (rabljeno), Peskalni stroj z visečo progo 150kg Fsdpswm Ar Nsfx Aplsgb TOSCA TS-150 Tip stroja: Viseča proga Max. premer odbelovanca: 600 mm Max. višina obdelovanca: 1000 mm Max. teža posameznega obdelovanca: 150 kg Odprtina v ohišju stroja: 800x1200 mm Število instaliranih turbin: 2 Tip turbine: 320 Premer rotorja turbine: 320 mm Moč turbine: 4 kW Max. pretok turbine: 56 kg/min Tip proge: Y proga Tip čistilca: zračni Montaža stroja: talna Ohišje: Mn + guma Filtrirna naprava: 2.000 m3/h Teža stroja: kg Širina stroja: mm Višina stroja: mm Dolžina stroja: mm Stroj bo v celoti obnovljen. Vsi obrabljeni deli bodo zamenjani z novimi. Stroj bo prebarvan v novo barvo.