Druge Naprave In Dodatki nakup rabljenega (124.494)

Stanje: rabljeno,

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG komplet zavor lahka široka KB80/KB100/KB125/KB140/KB160 za dvigala DH in P. Drugi motorji KBH / KBF / KBV / K-Motor, rezervni deli, zavore in drugo na zahtevo. Rodpfoxxrvrsx Agtet Pošljite nam e-pošto ali nas pokličite. Račun z DDV.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Vodilo za vrv za DEMAG DH Redoxu Di Aspfx Agtet levo 5-6/14 levo 1/7,5 levo 3-4/11 desno 5-6/11,3 levo 10/20 levo 20/25 Na zahtevo so na voljo številni drugi motorji KBH / KBF / KBV / K-Motor, nadomestni deli, zavore in drugo. Račun z vključenim DDV.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Verižni ohišji PK1-PK10 Na zahtevo so na voljo tudi drugi motorji KBH / KBF / KBV / K-Motor, rezervni deli, zavore in še veliko več. Rsdpfxsxxtdkj Agtot Pošljite nam e-pošto ali nas pokličite. Račun z DDV.

Leto izdelave: 2020, stanje: novo, številka stroja/vozila: 126752771, 6x idler wheels for Caterpillar D10 crawler * NEW * Rodpsmwit Njfx Agtet Further information Type: Undercarriage part, Overall condition: very good, Technical condition: very good, Visual condition: very good,

Leto izdelave: 2011, stanje: novo, številka stroja/vozila: 935714526, new reconditioned gearbox for Caterpillar D11 N R with Prefix 74Z Further information Rsdpehd I R Tjfx Agtet Type: gearbox, General condition: very good, Technical condition: very good, Visual condition: very good,

Leto izdelave: 2020, stanje: novo, številka stroja/vozila: 311345882, Atlas Copco Secoroc DTH Drill Rods 102 / 114mm Unused 4x 102mm / L = 5000mm 4x 114mm / L = 6000mm 3x shank adapters 114mm Redpfxemwitto Agtet 1x drill bit 140mm Additional Information Intended use: Construction Overall condition: Very good Technical condition: Very good Visual condition: Very good

Stanje: rabljeno, številka stroja/vozila: 419032539, Caterpillar D11 N R torque converter * overhauled * Further information Redpfx Aemwitzjgtjt Type: Transmission,

Leto izdelave: 2016, stanje: novo, številka stroja/vozila: 180147360, D10 control coupling Redpfxehyuy Ee Agtjt * newly overhauled * Further information Type: Transmission, General condition: very good, Technical condition: very good, Visual condition: very good,

Leto izdelave: 2018, stanje: novo, številka stroja/vozila: 781363111, CAT 3304 Cylinder Head * New * Rodpfx Agshyx U Djtjt Further information Type: Engine, Overall condition: very good, Technical condition: very good, Visual condition: very good,

Stanje: novo, številka stroja/vozila: 944460433, Remanufactured torque converter for Caterpillar D11 N R with prefix 74Z Rodpfsmwit Ejx Agtot Further information Type: Transmission, General condition: very good, Technical condition: very good, Visual condition: very good,

Stanje: zelo dobro (rabljeno), Indramat DDS02.2-W100-BE12-01-FW Digital AC-Servo Controller DDS02.2-W100-BE12-01-FW Indramat Redpfod Ndy Ujx Agtst Digital AC Servo Controller 100A Cooling type: Air More items – new and used – available in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Schleich GLP2-E Safety Tester, Insulation Testing Device GLP2E Test Equipment Item condition: Used, in perfect working order REGAL-B-PD(BOR) Redpfx Ajivd I Segtst You can find more testing equipment – new and used – in our shop! International shipping costs available on request!

Stanje: kot nova (razstavni stroj), Ogrevanje: para Krmilna plošča: ADITEC Osnovna širina: 157 cm Osnovna globina: 240 cm Višina korpusa: 264 cm Minimalna višina prostora: 320 cm Priporočena višina prostora: 330 cm Dimenzije dimnega vozička (VxŠxG), cm: 200x100x100 Priključna moč za HP ogrevanje: 60,5 kW Rodpfxjphnz No Agtst Širina generatorja dima: 50,0 cm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo komplet orodij in dodatkov za upogibne stroje, predvsem PROMECAM. Prodaja v enem ali več manjših kompletih. Cena na zahtevo. Rodpfxjxvxkqe Agtet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Všetky dopravníky vyrobené spoločnosťou Cefla. Pracovná šírka všetkých dopravníkov je 1 400 mm. Všetky dopravníky s frekvenčným meničom. Valčekový dopravník TN 4600 Valčekový dopravník TN 2000 Pásový dopravník TN 5000 Pásový dopravník TN 5000 Pásový dopravník TN 4500 Valčekový a priečny dopravník GT 180/4500/3600/C3 Valčekový a priečny dopravník GT 180/4500/3600/C3 Pásový dopravník TN 11600 Všetky dopravníky vo veľmi dobrom stave, pochádzajú z ukončenej výroby. Umiestnené v Nórsku. Pre ďalšie informácie prosím kontaktujte Rekman Maskin & Service. Séria Cefla TN je priemyselný systém dopravníkov vyrábaný spoločnosťou Cefla Finishing, ktorý sa primárne využíva na automatizovanú prepravu obrobkov v lakovacích a povrchových linkách. Tieto zariadenia sú často integrované do rozsiahlejších výrobných celkov na presun panelov alebo častí nábytku medzi striekacími strojmi, sušiacimi pecami a stanicami nakládky/vykládky. Redpoymfu Eofx Agtot

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder KÖLLE F45 with Power Feed and Integral Fence Very good condition; the machine comes from a small model-making workshop and has only seen light use. Everything functions flawlessly. All bearings and guides are in good shape, and the machine runs extremely smoothly. Year of construction: 1992. The fence features a jaw that can be adjusted in depth with fine adjustment and a scale, allowing for jointing tasks (e.g., when creating a gluing profile). The entire fence can be precisely and rapidly set using a handwheel and leadscrew, with cutting depth displayed on a digital gauge. Includes spindle lock via lever. The control panel is at eye level. Equipped with AIGNER integral fence. Efficient chip extraction possible with two extraction ports (125 mm and 100 mm). Comes with a 30 mm spindle, continuously tiltable from -5° to 45°. Spindle tilt is motorized, with fine adjustment via handwheel and digital gauge. A 40 mm spindle can also be installed. Reversible spindle rotation (clockwise/anticlockwise). Nationwide personal delivery and demonstration in Germany for €220. Shipping to Austria and other EU countries is available on request. Large table opening, which can be reduced with various rings—allowing safe operation with both large and small tooling. Speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment by handwheel and digital readout. Includes extendable auxiliary support (2,200 mm long). Very robust and durable build—designed for heavy-duty milling, suitable for any routing task. Optimal power transmission via V-belt drive. Supplied with manual. Comes with 4-roller power feed HAFFNER, type 904. Feed offers both directions and 4 speeds, with individually mounted feed rollers. The machine table is 1,200 mm wide by 1,000 mm deep, with 500 mm table extensions on both sides. Ready for immediate use. 380 V, 6,000 W and 8,600 W via two speeds; equipped with extra powerful motor. Redpfxjy Hxtpj Agtot Fitted with all necessary safety features, motor brake and emergency stop. Approved by the Wood Trade Association (Holz-BG) and carries the GS safety mark. Machine weight approx. 1,000 kg. Motor protection switch against overload. Professional-grade equipment—not DIY store quality. Optimal, simple, fast, and safe to operate.

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Redpfxjyv E Ais Agtot Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Rsdpfx Asm Nntyegtjt Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Rjdpewrkctjfx Agtjt Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: zelo dobro (rabljeno), Ponujam profesionalno vakuumsko črpalko priznane nemške znamke Becker, model VT 4.40. Naprava je namenjena industrijski uporabi, odlikujejo jo visoka zanesljivost in brezvzdrževalno delovanje. Črpalka deluje v suhi, oljeprostorski tehnologiji, zato ne potrebuje olja in zmanjšuje obratovalne stroške. Idealna je za aplikacije, kjer sta zahtevani čistoča ter stabilen vakuum. Zunanji videz je zelo dober. Naprava je kompletna. Tehnični podatki: Proizvajalec: Becker, Nemčija Model: VT 4.40 Leto izdelave: 2007 Kapaciteta: pribl. 40 m3/h pri 50 Hz Vakuum: do pribl. 150 mbar absolutnega tlaka Moč motorja: pribl. 1,25 kW Trifazno napajanje Št. obratov: pribl. 1420 – 1700 obr/min Teža: pribl. 38 – 40 kg Uporaba: - CNC stroji in vakuumske mize - Vakuumsko pakiranje - Lesnopredelovalna industrija - Tiskarne in grafika - Transport materialov Prednosti: - Suho, brezoljno delovanje – brez vzdrževanja olja - Tiho in stabilno delovanje Rodpfx Agjyxgt Ietjt - Robustna industrijska konstrukcija - Dolga življenjska doba lamel Izdelano v Nemčiji.

Stanje: rabljeno, Leto izdelave: 2005, TAKISAWA TC 350M CNC stružniški center Proizvajalec: TAKISAWA, izdelano na Japonskem Rsdpfoy Eyb Eox Agtjt Model: TC – 350M L5 Krmiljenje: FANUC 21-iTB Leto: 2005 Revolver: 12 postaj Maksimalni premer obdelave: 700,0 mm Največji stružni premer: 460,0 mm Največja stružna dolžina: 510,0 mm Hodi: X-os – 440,0 mm / Z-os – 550,0 mm Obratno število vretena: do 2.500 min⁻¹ Kapaciteta palic: 80,0 mm (potrditi) Dodatno: C-os Rezkanje Konjiček Tipalo za nastavljanje orodij Transportni trak za ostružke 10'' 3-čeljustna vpenjalna glava Orodja za revolversko glavo

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč in malo uporabljen tračni sušilnik podjetja New eco-tec naprodaj. Po želji je možen tudi z izpiralnikom zraka in silosom 180 m³ za posušene materiale. Naprava je bila do nedavnega v obratovanju in je takoj pripravljena za uporabo. Sistem obsega 2 kontejnerja in ima dolžino traku 24 m, projektirano za toplotno moč 1,5 MW. Tračni sušilnik je v kontejnerjih v celoti izdelan iz nerjavečega jekla. Rjdeyr Aiqepfx Agtjt Ogled možen po dogovoru.

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Rodowzzzfjpfx Agtot Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: zelo dobro (rabljeno), For sale: Professional positive pressure ventilator TEMPEST DD21, commonly used by fire brigades, industrial plants, paint shops, warehouses, for emergency ventilation, and wherever high airflow performance and reliability are required. The equipment is fully functional, powerful, and ready for operation. Motor and controls are built in EX (explosion-proof / ATEX) version – premium equipment, rarely available on the secondary market. — Technical data: • Brand / model: TEMPEST Power Blower – DD21 • Manufacture: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX Class: EEx e II T3  – Speed: 2850 rpm • Certifications:  – AMCA CERTIFIED (certified airflow performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large, high-performance metal impeller — Rjdpfx Aexyugpogtot General condition: Well-maintained, fully functional equipment previously operated in a municipal unit. Normal signs of use, but structurally and technically in very good condition. — Applications: • Fire brigades – positive pressure ventilation • Industrial halls, warehouses, paint shops • Smoke, dust, and vapor extraction • Cooling of machinery and processes • Blowing during maintenance operations