Donau Danusys 1510 S nakup rabljenega (86.355)

Stanje: zelo dobro (rabljeno), LOMILNIK / DROBILEC / MLIN ZA ODPADNI STIRENPEN – GRINDER N. 1 Na prodajo profesionalni, zmogljivi drobilec (lomilnik/mlin) za odpadni stiren, namenjen delu v neprekinjenem tehnološkem procesu. Za razliko od samostojnih strojev, kjer je treba odpad ročno ali s transportnim trakom dovajati, je ta naprava konstrukcijsko prilagojena za vgradnjo neposredno pod linijo za rezanje stirena. Samodejno prejema, drobi ter zmanjšuje prostornino odpadkov (bočnih in spodnjih), ki med procesom rezanja pristanejo na transportnem traku. Cena: 5.900 EUR (znižano iz 6.500) Tehnične specifikacije: Zunanje dimenzije (d x š x v): 191 cm x 120 cm x 64 cm Kjdpfx Aszc Hnlobyjdr Dimenzije dovodne odprtine: 148 x 38 cm Pogon: motor-reduktor 7,5 kW Obe gredi sta gnani (z zobniki) Tagi: drobilec, drobilec stirena, mlin, mlinček za stiren, naprava za recikliranje, reduktor prostornine, uničevalec stirena, kompaktor, konverter odpadkov.

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Kdsdpfsu Et Nbox Abysr Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 2355-2, Offer 24416 Technical Specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm Ksdpfeufw S Rox Abysdr - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: rabljeno, Leto izdelave: 2013, Leto proizvodnje: 2013 Kdedpszrglzefx Abysr 240 V, zaščitni razred IP 65 Delovni tlak: 6–8 bar

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 Kdodpev If T Tsfx Abyer T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW Kdsdpfx Abot Hwwqsyjr - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- Kjdpfxot Hxage Abyedr This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2016, Transportador de rodillos de desvío Transnorm 3715-1050-1030 RA1854 Fabricante: Transnorm Kedpfxjk Abhhe Abyedr Ancho de rodillos (RB): 1030 mm, rodillos de acero Ancho nominal/exterior (NB): 1050 mm Longitud: 3715 mm Altura del bastidor: 250 mm Diámetro de rodillo: 50 mm Ángulo de desvío: 30° a ambos lados 7 filas de rodillos de desvío controlables individualmente Motor: MOVI-Mot 3x300-500V 1,5 kW Velocidad de transporte: regulable libremente mediante convertidor de frecuencia Alcance de la entrega: sin soportes (consultar si se requieren) Para un asesoramiento individual y profesional, no dude en contactarnos. Comuníquese con nosotros por teléfono o correo electrónico. Estaremos encantados de ayudarle en la planificación y realización de sus proyectos. Esperamos su contacto. Atentamente, El equipo de Dr. Sonntag GmbH & Co. KG Su especialista y contacto para intralogística

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Belt Curve Conveyor Left GKF 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the delivery scope, but are optionally available upon request. Kedpfjk Abtpjx Abyjdr Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guiding system ensure the smoothest possible operation. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Frame width (NB): 775 mm Belt width (GuB): 600 mm Height (BH): 190 mm Inner radius (IR): 600 mm Conveying angle: 90° Incline: 191 mm / 90° = 764 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): Please contact us Drive: SEW gear motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of manufacture: 1999 Optionally available: Supports Lateral guide (one-sided or double-sided) All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a personalised, professional consultation, please get in touch with us. Contact us by phone or e-mail. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: zelo dobro (rabljeno), Ponujamo profesionalni hladilni agregat Hyfra Chilly 08/1-S, namenjen hlajenju strojev, industrijskih naprav, laserjev, varilnih aparatov in drugih sistemov, ki zahtevajo stabilno temperaturo tekočine. Naprava je popolnoma delujoča, preizkušena in pripravljena za uporabo. Med testiranjem doseže temperaturo 8,3 °C, kar potrjuje pravilno delovanje hladilnega sistema (vidno na fotografiji). Tehnični podatki: * Proizvajalec: Hyfra GmbH * Model: Chilly 08/1-S * Leto proizvodnje: 2006 * Hladilna moč: 890 W (pri 37 °C) * Hladilno sredstvo: R407C * Količina hladilnega sredstva: 0,67 kg * Napetost: 230 V / 50 Hz * Maksimalni tok: 5,10 A * Priključna moč: 1,20 kW * Maksimalni delovni tlak: 29,5 bar * Maksimalna temperatura okolja: +42 °C * Masa naprave: 49 kg * Masa z vodo: 67 kg Stanje: Kedpozmdtfefx Abyedr * Rabljen. * Tehnično brezhiben. * Običajne sledi uporabe na ohišju. * Opremljen z vodnim filtrom, indikatorjem nivoja tekočine, manometrom in hitrimi spojkami. Idealen je za industrijsko uporabo, laboratorije in povsod, kjer je potrebno učinkovito in zanesljivo hlajenje vodnega kroga.

Stanje: dober (rabljeno), Oprema: Na voljo je tipska ploščica, Used stainless steel container / pressure vessel Previous use: Pharmaceuticals, cosmetics Ksdpfsr A Embsx Abyjdr Item number: 10806 Volume: 5,700 liters Type: Vertical, on 4 legs Leg height: 1,700 mm Product-contact material: 1.4571 / AISI 316 Lid: Ø 720 mm Design: Single-walled Operating pressure (as per nameplate): -0.3 / +3 bar Container dimensions: Outer diameter: 1,600 mm Overall width: 2,200 mm Overall length: 2,200 mm Overall height: 2,940 mm Cylindrical height: 2,500 mm Materials: Internal: 1.4571 / AISI 316 External parts: 1.4301 / AISI 304 Features: Nameplate: Yes Sight glass

Stanje: dober (rabljeno), Oprema: Na voljo je tipska ploščica, Used stainless steel tank with agitator Previous application: Pharmaceuticals, cosmetics Kdedpfxjr A Emxo Abyjr Article number: 10801 Volume: 5700 liters Type: Standing on 4 legs Leg height: 1700 mm Product-contact material: 14571 / AISI 316 Lid: Ø 720 mm Design: Single-walled Operating pressure (according to nameplate): -0.3/+3 bar Tank dimensions: Outer diameter: 1600 mm Overall width: 2200 mm Overall length: 2200 mm Overall height: 2940 mm Cylindrical height: 2500 mm Materials: Internal: 14571 / AISI 316 External parts: 14301 / AISI 304 Features: Nameplate: Yes Sight glass Side-mounted agitator

Leto izdelave: 2025, stanje: zelo dobro (rabljeno), Mobilni sistem za čiščenje s toplo vodo pod visokim tlakom, namenjen težkim delom, letnik 2025. Pred kratkim je bil odstranjen iz zaprte tovarne za predelavo hrane, kjer je bilo več takšnih sistemov nameščenih zunaj glavne stavbe za čiščenje različnih območij tovarne. Tlak 175 barov, maksimalni pretok 1.260 litrov na uro. Motor z močjo 8,2 kW in kotel z močjo 115 kW. Zaščiten pred zmrzaljo do -20 stopinj Celzija. To je najnovejši model, ki je bil uporabljen le kratek čas. Imamo tudi dva sistema, letnika 2017 in 2019, oba sta v odličnem stanju. Kdedozt N R Njpfx Abyor

Stanje: dober (rabljeno), Pnevmatska stiskalnica Cauhe S-IV A 120×160 za vročo žigosanje Stroj je v popolnoma delovnem stanju, kot nov. Izdelan v Španiji. Format: 1200 x 1600 mm Teža: 10.000 kg Napetost: 380 V Motor: 11 kW Udarna sila: 2 Tm/dm² Ksdpfxozlaito Abyjdr Oprema: – Pnevmatska sklopka in zavora – Nadzorna plošča – Grejna plošča v polnem formatu s 3 grelnimi segmenti – 3 načini delovanja: neprekinjen, časovno zamaknjen, ročni – 3 neodvisni sistemi za podajanje folije – Osrednje samodejno mazanje – Dodatni varnostni elementi – Orodja za delovanje – Stiskalna plošča

Stanje: dober (rabljeno), MBO K760E S-KTL/6+ – stroj za zlaganje s stiskalnico SBAP 82ME Proizveden leta 2016. Format papirja: 760 x 1100 mm Največja hitrost: 180 m/min Visok sistem za podajanje skladov, podajalnik palet FP-95 6 vložkov na prvi enoti 2 noža 1 stranski vložek za nožem Dodaten vložek za furnir. Zvočna izolacija na vseh enotah MBO SBAP-82ME – stiskalnica za zlaganje Vključeni rezervni deli in dokumentacija. Stroj je v odličnem stanju in pripravljen za delo. Kdodpfxszlaims Abyjr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vijačni kompresor ALUP SCK15-10 Kjdjzmw A Hjpfx Abyjdr Tehnični podatki: zmogljivost: 1510 m3/min; motor 11 kW; maksimalni tlak: 10 bar; delovni čas: 12437 ur; kompresor je v popolnoma delujočem stanju; neto cena: 5200 PLN bruto cena: 6396 PLN Spodaj je video.

Stanje: rabljeno, konfiguracija osi: 1 os, dovoljena osna obremenitev (os 1): 10.000 kg, prva registracija: 02/2012, skupna dolžina: 10.850 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, vzmetenje: zrak, velikost pnevmatike: 275 / 70 / R22.5, medosna razdalja: 7.060 mm, barva: zelen, Leto izdelave: 2012, Oprema: dvižna zadnja plošča, Splošne informacije Letnik modela: 2026 Konfiguracija osi Velikost pnevmatik: 275 / 70 / R22.5 Znamka osi: BPW Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Zadnja os: Dvojna montaža; Najv. obremenitev osi: 10.000 kg; Krmiljena; Profil pnevmatike levo znotraj: 25%; Profil pnevmatike levo zunaj: 25%; Profil pnevmatike desno znotraj: 25%; Profil pnevmatike desno zunaj: 25% Teže Lastna teža: 6.080 kg Nosilnost: 18.920 kg Dovoljena skupna masa: 25.000 kg Funkcionalnosti Dvižna ploščad: Dhollandia DHLSU.40, zadnja vrata, 2.000 kg Kdedozrtrbepfx Abyer Zgodovina Število lastnikov: 1 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Optično stanje: povprečno Varnost proizvoda Proizvajalec: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Depo ZPS Tip MCFV 1260 S Leto izdelave 2010 Transporter za ostružke Krmiljenje: -Heidenhain iTNC 530 -Elektronski ročni kolesnik Glavno vreteno: -Maks. hitrost vrtenja 8000 obr/min -Orodni držalo SK50 Miza: -Vpenjalna površina 1450 x 590 mm -Maks. obremenitev mize 1350 kg Izmenjevalec orodij: Kdedpfx Abjzdrahjyjr -24 mest v magazinu Pomiki: -X - 1270, Y - 610, Z - 760 mm Dodatna oprema: -Infrardeča 3D merilna tipala Rok dobave: -Takoj

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge. Kodpszgvmqefx Abyodr

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 7 m/min, teža obdelovanca (maks.): 1.000 kg, delovna širina: 2.500 mm, volumenski pretok: 8.000 m³/h, leto zadnje generalne obnove: 2025, skupna masa: 3.200 kg, vrsta vhodnega toka: trifazni, prehodna višina: 210 mm, skupna višina: 2.350 mm, skupna dolžina: 2.450 mm, skupna širina: 3.500 mm, delovna višina: 950 mm, Ceetec DuoFlex Spray – The Spraying Machine for Joiners, Furniture Manufacturers, CLT and Glulam Suppliers, and much more. Wherever a solid, simple yet exceptionally well-equipped machine is needed, the DuoFlex Spray Surface Spraying System comes into play. Painting can be so easy when you not only have a robust, long-lasting spraying machine (made in Denmark, electronic components from Germany (Beckhoff, etc.)), but above all one that puts you, the operator, at the center: Everything is intuitive and easy to use, while still offering functions you would look for in vain on other machines, or only find in far higher price ranges. Here are some hard facts about the DuoFlex Spray Surface Sprayer: 1. Color change in 3–5 minutes 2. System capacity just 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings Kdodpfx Ajffc Tyjbyor 4. Two 100% separate circuits: For water/solvent or clearcoat/color lacquer 5. Maximum reproducibility: Thanks to smart programs where ALL important parameters are saved automatically. 6. Easy to learn: After 4-6 hours of training, even a baker can spray better than a manual coater with 10 years of experience. 7. Modular expandability: Drying system, sanding machine, pre-heating, robotic mechanization—all from a single source. 8. Service: We know our field. Our owner worked nearly 10 years as a coatings manager and brings this hands-on expertise to your advantage even after the purchase. The machines are extremely robust and durable; if service is ever needed, we keep a well-stocked spare parts inventory in Germany and Denmark. Processing dimensions of the DuoFlex Spray Coating Machine: 1. Standard: 1,300 mm width and 200 mm height 2. Larger: 1,800 mm width and 200 mm height 3. Up to: 3,200 mm width and 330 mm height Length: From 250 mm to virtually unlimited. If you need to coat glulam ceiling elements 16, 18, or 20 meters in length, we will simply tailor the mechanization to your needs. Does this sound interesting? Would you like to try out the machine in our technical center? Do you have specific requirements and are unsure if we can meet them? I would be happy to assist you personally! Yours, Martin Bruhn Owner, Bruhn Coating Systems // Exclusive Sales Partner of ceetec A/S – Middelfart, Denmark.

Stanje: pripravljen za uporabo (rabljen), Schmidt 32-151-01 Toggle Press Press PressControl 60 Kdodpfx Abeulf A Eoyjr Pressing force: 15 kN Stroke: 40 mm Overrun time: 0.07 sec Overrun distance: 15 mm PressControl 60 Two-hand operation You are welcome to visit and inspect the machine. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued. A valid VAT-ID is required. Subject to prior sale. Visit our shop and browse our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as errors in the article description may occur and are subject to change.

Stanje: rabljeno, Leto izdelave: 1990, Nosilec MK 3 Serijska številka 4131 Domet 1000 mm Dokumentacija je na voljo Hidravlično vpenjanje, moč kW Masa stroja približno 2,6 t 3 metri tovornega prostora v tovornjaku Ksdpfx Abjzkbqvoyjdr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Working width 4500 mm Working height 3000 mm Number of pressing cylinders 6 pcs. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S Frame Press Bavaria 2000 L, Year 2026 ----- AVAILABLE AT SHORT NOTICE from stock Engelfried, 73447 Oberkochen! INNOVATION for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of the vertical pressing cylinders 1, 2 and 3 via enabling button, incl. selector switch ON/OFF for beam 2 With automatic pressing cycle + manual control for corner joints (tenon & mortise and dowel joint/mortised tenon), switchable via selector switch on the control cabinet. Comes standard ready for optional use of counter profiles if sashes are folded on the loose part. CE version Base machine in heavy-duty welded frame construction with thick-walled special hollow profiles. Guide rails for pressing beams at the press corners in wear-resistant, machined design. Fast, smooth, manual width adjustment via ball-bearing mounted carriage; fixable in 50 mm grid, optionally motorized width adjustment with hydraulic clamping (at extra charge). Height adjustment and pressing by long-stroke cylinders in one operating cycle. Right press corners with integrated horizontal cylinders, thus no vertical positioning of horizontal pressing cylinders necessary, preventing cylinder collisions. Lower abutment adjustable to optimal insertion height in several positions. 3 kW compact hydraulic unit with integrated control block, variable pressure regulation 20-120 bar, pressure gauge. Control via pushbutton with separate circuits for vertical and horizontal pressing cylinders, mounted on mobile operating desk. 2 vertical double-acting pressing cylinders, stroke adjusted to working height, piston diameter 60 mm, max. pressure per cylinder 2100 kg 2 horizontal double-acting pressing cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure per cylinder 1250 kg Abutment and pressure plate depth 100 mm Control cabinet at the left foot of the machine, 400 V, 50 Hz Machine supplied with ready-to-connect 16 A plug Paintwork: RAL 7035 light grey with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm Note: actual working size 4,500 x 3,000 mm (L x H) Required space: 5,600 mm x 1,400 mm x 3,550 mm (L x W x H) Article: Medium pressure beam complete with pressing cylinder, pressure hose and shut-off valve up to 2,750 mm height Note: actual working height: 3,000 mm Article: Single-pressure regulation for medium pressure beam, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Continuously height-adjustable cross-pressure device, complete with pressing cylinder and abutment, throttle and shut-off valve Kdsdpfx Ajyyqnfebysr Article: Single-pressure regulation for cross-pressure device, adjustable up to max. 100 bar (for pressing cross-bar windows) Article: Shut-off valve at the 3rd vertical cylinder Article: Shut-off valve at the upper horizontal cylinder Article: Shut-off valve at the lower horizontal cylinder

Stanje: dober (rabljeno), 1 rabljena hitra radialna vrtalna naprava Kdsdozl Ufcepfx Abyer Proizvajalec: Donau Tip: DR 28 Z Letnik: 1985 Tehnični podatki: - Vrtalna zmogljivost v jeklu ST 60: 28 mm - Vrtalna zmogljivost v litini GG 25: 40 mm - Rezkanje navojev v jeklu ST 60: M 30 - Rezkanje navojev v litini GG 25: M 40 - Nastavek za vreteno: MK 3 - Premer vretena: 50 mm - Gib pinole: 150 mm - 18 vrtljajev vretena: 45 – 2240 vrt/min - 4 podaji za vrtanje: 0,1 – 0,45 mm - Min./maks. razdalja vreteno – miza: 300 / 700 mm - Vrtalni radij min./maks.: 305 / 1005 mm - Višina mize: 820 mm - Velikost mize: 1200 x 600 mm - Pogon: 400 V / 6 kW - Potrebna površina: pribl. Š 1300 x V 2800 x G 2300 mm - Teža: pribl. 1500 kg - Vključno z: - Napravo za rezkanje navojev - Hidravlično podpora stebra + objemka za podaljšek - Napravo za hlajenje - T-utori, nameščeni vertikalno na levi strani stroja

Stanje: zelo dobro (rabljeno), PFAFF 122-6B S je visokokakovosten nemški šivalni stroj, namenjen delu z debelejšimi materiali. Opremljen je s trojnim transportom (hoječa tačka), ki omogoča enakomeren pomik materiala med šivanjem. Stroj je odličen za šivanje: - usnja, - pohištvenega tapetništva, - tehničnih materialov, - ponjav, - pasov, - prevlek. Tehnični podatki: Proizvajalec: PFAFF Model: 122-6B S Trojni transport Upravljanje z nožno pedalko Delovna miza vključena Stojalo za tuljave Pogonski jermen Nemška proizvodnja Kdsdpfx Abozgm Sdeyor Stanje: Stroj je rabljen, ohranjen v dobrem vizualnem stanju. Stanje je razvidno s fotografij. Prodaja se natanko v stanju, kot je prikazano na slikah.