Demag Ergotech - Sistem 250/280-80 nakup rabljenega (35.080)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 80 kosov novih DEMAG vodil za vrv / vodilo vrvi za dvigala žerjavov Iodpfx Asv T Tq Degteat za DH2000, DH1000, DH500, DH300 in 30x vodila vrvi P-Zug P200 do P1000 plus 50 zavor (npr. novi zavorni diski, zavorne obloge, zavorni ščiti, pokrovi za zavore) vse novo Tovarniška cena cca 300.000,00 € Informacija: na zalogi imamo več kot 20.000 DEMAG rezervnih delov! Oglejte si tudi druge ponudbe iz moje zaloge!

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Iajdpfeylz Aiex Agtjt

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler Isdjx D Rqrjpfx Agtoat • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Kontaktirajte nas za ponudbo Iaedpfx Ageyycihstet

Stanje: dober (rabljeno), Overall height: 2960 mm Iaedpfjik E S Dex Agtot Lifting range: 1100-2400 mm Boom length: 900 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Iodpfsrgw Exjx Agteat Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Leto izdelave: 1990, stanje: nepreverjeno (rabljeno), The crane is dismantled. Location: Oebisfelde. Iaedpfef Sftlex Agtst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGOTECH 200 - 840, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 560 mm, delovna prostornina: 442 cm³, minimalna višina orodja: 340 mm, širina plošče: 860 mm, višina plošče: 860 mm, moč črpalke: 30.000 W, Stroj je popolnoma delujoč, do konca je deloval na brizgalnem stroju. Iedpfx Aeyxn Tvjgtoat

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: MBxx-25, DEMAG KBK 2 – Overhead Crane System, Crane Runway, Indoor Crane We assemble your crane runway to the desired dimensions – please inquire! Load capacity/hoisting capacity: 80, 125, 250, 500 up to 1000 kg Iaodpfewq A Avex Agtot Technical data of the system: Profile: Demag KBK 1, 2L, and 2 rails Also available as a single-girder runway with curved sections, turntables, and switches! Variable installation height The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, energy chains, brackets/hangers, etc. All sizes of chain hoists available as options Various systems available Very good used condition Rails available in yellow or red! Shipping via freight forwarding possible, collection preferred Demag KBK1, KBK2, and KBK3 rails kept in stock!

Leto izdelave: 1998, stanje: rabljeno, številka stroja/vozila: MBMAKZDoppel, 1 piece - Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 10 units available 250kg / 0.25t load capacity / lifting capacity - single strand Distance between the two lifting chains variable: 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both chain return pulleys incl. blue mounting plates is sold Iedpjtn Ritefx Agteat Total weight approx. 50kg, connection: 400V 50Hz TOP condition, fully functional. No worn-out or used-up unit! Connect and put into operation. Taken directly from ongoing operations Item location: 75053 Gondelsheim See pictures

Stanje: rabljeno, Leto izdelave: 1978, Doseg 5.500 mm Nosilnost 250 kg Višina 3.800 mm Dvižna višina 3.800 mm Številka žerjava 1.30 Iodpfx Agoyqvlijtsat Tehnični podatki so podatki proizvajalca ali upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naše poslovne in prodajne pogoje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: rabljeno, Nosilnost: 250 kg Dvig / mm Dovoljena obremenitev: 250 kg Dolžina verige: 2,5 m Teža: ca. 30 kg Iajdjykvbqspfx Agtet

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 862-1053, Stroj za brizganje plastike | Mannesmann DEMAG - Ergotech 5000-2300 Zapiralna sila [kN]: 5.000 Število komponent: 1 Širina zapiralne plošče [mm]: 1300 Višina zapiralne plošče [mm]: 1200 Horizontalna razdalja med vodili [mm]: 900 Vertikalna razdalja med vodili [mm]: 800 Premer centrirnega obroča [mm]: 200 Najmanjša vgradna višina [mm]: 400 Isdpfx Aeygikwsgtjat Največja vgradna višina [mm]: 880 Največja razdalja odprtja [mm]: 810 Največji izmetni hod [mm]: 230 Navoj [M]: 24 Največja teža orodja [kg]: 6.700 Največja teža orodja premikajoča stran [kg]: 4.400 Premer polža [mm]: EE1:60 Maksimalna brizgalna masa [g] PS: EE1:800 Razporeditev agregata: EE1: vodoravno Oprema: 2-kratni izvlek jedra, z robotom Ogled je možen kadarkoli po predhodnem dogovoru. Prosto naloženo na tovornjak (Butzbach).

Stanje: rabljeno, Leto izdelave: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Tie bar spacing (vertical): 520 mm Tie bar spacing (horizontal): 520 mm Iasdsvurhqopfx Agtst Shot volume: 106 cm³ Design: Horizontal Drive type: Hydraulic

Leto izdelave: 1999, stanje: rabljeno, DEMAG KBK 2 - Crane Runway Ceiling System Hall Crane Please inquire about crane runways according to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg Technical data of the system: Demag KBK 2 profile rails Also available as single-rail tracks with curve sections and switches! Mounting height variable The system can be supplied complete, including: KBK rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, etc. All electric chain hoists are optionally available. Thanks to the low dead weight, installation is also possible in lightweight constructions, timber halls, or older buildings. Very good used condition Rails available in yellow or red! Shipping by freight carrier possible, but collection preferred Demag KBK1, KBK2, and KBK3 rails are in stock! Contact: Mr. Goepferich Iaedpfx Agjct Dhastjt info[at]mobatgg.de

Stanje: kot nova (razstavni stroj), Leto izdelave: 2010, Unidad de inyección secundaria independiente DEMAG Multi-plug 80 L para montaje lateral en máquina de moldeo por inyección. Máquina de laboratorio "como nueva". Isdpoiwx T Esfx Agtsat

Stanje: pripravljen za uporabo (rabljen), Clamping force: 350 kN, tie bar spacing: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, min. mould installation height: 180 mm, max. opening stroke: 350 mm, max. platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. Inspection on site is possible. Iaodpfx Agewaa H Detot

Leto izdelave: 1996, stanje: rabljeno, številka stroja/vozila: MBMAKZ, Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 250 kg / 0.25 t load capacity / lifting capacity – single-strand Distance between the two lifting chains approx. 1.2 m (can also be shortened) Lifting height approx. 3.5 m Complete with pendant control (approx. 3 m) Total weight approx. 60 kg, connection 400V 50Hz TOP condition, fully functional. Not a worn or used-up device! Connect and start operating. Taken from running operation Iasdpfotn Rirox Agtst Item location: 75053 Gondelsheim See pictures

Leto izdelave: 2000, stanje: rabljeno, Demag Chain Hoist Crane Lifting Unit 250Kg DKUN 2-250 K V1 F4 Approx. 20 units available!!! 250KG / 0.25t rated load / lifting capacity – single-strand Equipped with 2 lifting speeds, lifting height approx. 4 m Complete with pendant control (approx. 3 m) and load hook Total weight approx. 40 kg, connection to 400V 50Hz, connector included Top condition, fully functional. Not a worn or used-up device! Simply connect and put into operation. Taken from ongoing operations. Item location is 75053 Gondelsheim Ijdpfx Ageg Nyyneteat See pictures

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Screw diameter: 45 mm Shot weight in polystyrene: 149 g/PS Clamping force: 100 kN 9302423 INJECTION MOLDING MACHINE, DEMAG CONVEYOR TECHNOLOGY, year of manufacture 1999 9307836 TEMPERING UNIT, PIOVAN GMBH GARCHING, THW9, year of manufacture 2011 Ijdpfx Aswvkggogtjat 784065 TEMPERATURE CONTROL UNIT, PLASTIC SERVICE GMBH, HRS 24I, year of manufacture 2003

Leto izdelave: 2016, stanje: kot nova (razstavni stroj), številka stroja/vozila: KBK FFM, DEMAG KBK 2 - Overhead Crane Track Indoor Crane The images show a sample crane runway with the components listed below. These are also available individually! Please inquire about your crane runway according to your required dimensions. Safe working load / lifting capacity from 80, 125, 250, 500 up to 1000 kg KBK 2-R switches left and right (with conductor line) KBK 2-R swivel discs 890mm (with conductor line) KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with conductor line) KBK 2-R rails (with conductor line) Isdpfsmmbn Tjx Agtjat The system can be delivered complete according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, accessories are available. Chain hoists available on request. Very good, almost like-new condition Shipping by freight carrier possible Demag KBK1, KBK2, and KBK3 rails are in stock!

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 67.553 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 30 mm, razmak između stupova: 355 mm, delovna prostornina: 106 cm³, injekcijska masa: 96 g, minimalna višina orodja: 210 mm, odmični hod: 400 mm, širina plošče: 480 mm, višina plošče: 480 mm, vgradna višina: 400 mm, ogrevalna zmogljivost: 8,3 kW (11,28 KM), moč: 11 kW (14,96 KM), Stroj DEMAG Ergotech Extra 50-200 z rokovalnim robotom SEPRO Axess S3. Pripravljen za proizvodnjo in na voljo za ogled kadarkoli. 2 pnevmatski kaskadi, 1 izvlek jedra AS, 6 integriranih ogrevalnih con. Iasdpox Ex R Ejfx Agtjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between platens: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Iajdeww H Nyspfx Agtet Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history – available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Iedpfx Aoww H S Iogteat Injection unit – two-component First unit (horizontal): Nitrided screw Screw diameter: 22 mm Second unit (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heating power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history – available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7154-0118, vpenjalna sila: 800 kN, odmični hod: 500 mm, širina plošče: 590 mm, višina plošče: 600 mm, TECHNICAL DETAILS Control type: NC 4 control system Locking system: Hydraulic Clamping force: 800 kN Clear distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Minimum mold size: 250 mm Maximum opening stroke: 500 mm Iodpfxswp I Syo Agtsat Maximum distance between plates: 750 mm Screw diameter (horizontal): 18 mm Screw diameter (vertical): 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating units: 8.8 kW Dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg Main connection: 400 V, 50 Hz, 135 A Maximum pressure: 210 bar Maximum flow rate: 130 l/min FEATURES - Two-component machine - Horizontal nitrided system - Vertical configuration with bimetallic screw - Complete machine documentation available