Cronosstech Cronoss 300X560 Ydg nakup rabljenega (162)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 5 kW (6,80 KM), STANDARDNA OPREMA Varjeno ohišje iz jeklene konstrukcije Trije valji z motornim pogonom Iz posebnega visoko odpornega materiala, kaljeni in brušeni valji Horizontalni in vertikalni delovni položaj Kaljeni standardni valjčni koluti Ločena premična upravljalna plošča 3-smerne mehanske ročne stranske podpore Natančno upogibanje z motorjem z zavoro 2 digitalna prikazovalnika IZBIRNA OPREMA Valjčni koluti za krivljenje cevi in profilov Izbirne dvoosne hidravlične stranske podpore Avtomatizacija z NC krmiljenjem TEHNIČNE LASTNOSTI Premer zgornje gredi: 80 mm Premer spodnje gredi: 70 mm Premer valjčnega kolesa: 245 mm Delovna hitrost: 7 m/min Moč motorja: 4,75 kW Dolžina: 1500 mm Lasdpfjw Smibex Al Noa Širina: 1000 mm Višina: 1400 mm Teža: 1645 kg

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 76 mm, radij upogibanja (maks.): 200 mm, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 76 x 3 mm Maximum: 200 mm Capability to bend tight CLR up to 2 x Ø Bending angle programming via touchscreen with multi-language system diagnostics Quick-change tooling system Digital display of bending angle Material springback compensation Foot pedal control for hands-free operation Laedpovn Euwofx Al Nja

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings Lodexbzr Uopfx Al Noaa * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.500 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması Laedpfx Aoxrbpnol Noa -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 400 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 500X4500MM ALT TABLA ÖLÇÜSÜ : 400X4500MM MOTOR : 30 KW MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Ljdpfx Aow Slxzol Noaa Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending Laodpfow Sl I Nex Al Noa * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg Laedpfxow Smb Re Al Noa

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Lsdpow Smfcjfx Al Nsaa Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 8 kW (10,88 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebenega visokotrdnega materiala, termično obdelane in brušene Vodoravni in navpični delovni položaj Kaljeni standardni valjčni elementi Ločena premična upravljalna plošča Mehanski ročni stranski nasloni, premični v 3 smereh Natančno krivljenje z motorjem z zavoro Dva digitalna prikazovalnika IZBIRNA OPREMA Valjčni elementi za krivljenje cevi in profilov Opcijski dvoosni hidravlični stranski nasloni Avtomatizacija z NC-krmiljenjem Lasdpfx Asw Smi Iol Nea TEHNIČNE KARAKTERISTIKE Premer valjev: 100 mm Premer valjčnih elementov: 315 mm Delovna hitrost: 7 m/min Moč motorja: 7,5 kW Dolžina: 2000 mm Širina: 1450 mm Višina: 1700 mm Teža: 3650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, Premer cevi (maks.): 65 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of workpiece length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Emergency-stop mobile foot pedal • Remote assistance • Mandrel and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic gripper clamp • Electric panel safety lock and key lockable panel • Electric system cooler • Overload protection • Detailed operation reports sent automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Extra mandrel length (up to 6 m) - per meter • Ball mandrel and wiper die Lasdpfx Aexircgsl Noa • Automatic mandrel lubrication system (for suitable pipe diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum Capacity mm Ø65x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances Adjustable Bending Power kW 22.5 Dimensions (LxWxH) mm 6350x1400x1600 Weight kg 3950

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Lajdpow Slcgefx Al Nea Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload Lsdpfx Alexw Eble Njaa * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 125 t, širina mize: 700 mm, dolžina mize: 900 mm, prebojna odprtina v mizi: 210 mm, nastavitev hidravličnega cilindra: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame, o Stress relief with vibration will be applied to the frame and welded components. o Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide supported by 8 guides Ljdpfxevxhqvo Al Njaa o Slide equipped with cushion cylinder o Components such as slide, connection rod, and ram nose of cast steel, GS52 o High-strength solid crankshaft – 4140 o Bronze bushing in connection rod (Zr14) o Rear flywheel placement o Spare table set o Hydraulic overload protection o Motorized adjustment of bed-slide o Automatic central lubrication o Pneumatic pedal with latch and double hand control with timer o Electronic counter o PLC control system with touchscreen - DELTA o Electrical switchgear by SIEMENS-SCHNEIDER o CE conformity - OPTIONAL o Finger safety light barriers - SICK, LEUZE o Safety PLC (controls all electric system, valves, double-hand, and pedal) - PILZ o Dual-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in accordance with CE regulations. TYPE: D-TYPE MONOBLOCK FRAME Capacity: 125 Ton Distance Bed to Slide: 500 mm Distance Between Uprights: 1000 mm Slide Adjustment: 100 mm Approx. Press Width: 1250 mm Approx. Press Depth: 1750 mm Approx. Press Height: 2850 mm Bed Bore Diameter: 210 mm Bed Size: 700 / 900 mm Die Holding Bore Diameter: 55 mm Slide Size: 340 / 550 mm Table Height from Floor: 850 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approx. Weight: 8,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 900 mm, dolžina mize: 1.200 mm, prebojna odprtina v mizi: 260 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded parts by vibration - Table parallelism and squareness tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Parts such as ram, connecting rod, and slide block made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushing in connecting rod (Zr14) - Rear-mounted flywheel - With spare bolster table - Fitted with hydraulic safety devices - Motorized die height adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - With electronic counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE certification - OPTIONAL - Light curtain finger protection barriers – SICK, LEUZE - Safety PLC (monitors all electrical system, valves, dual-hand and pedal controls) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective safety guards per CE norms to be included TYPE: D TYPE MONOBLOCK FRAME Capacity: 300 Tons Ledpfx Asvyr Eaol Nsaa Shut Height (Table to Ram): 530 mm Distance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Slot Diameter: 60 mm Ram Size: 470 x 900 mm Table Height from Floor: 1000 mm Stroke Adjustment: 20–200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 18,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings Lsdpfxsw Slf Us Al Neaa * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) Laedpfx Aexd S T Uel Noa * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft Laedexw Ecvjpfx Al Nja * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 300 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.200 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri Lodpfxoxrbn Rs Al Neaa BASIN : 300 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 400X3000MM ALT TABLA ÖLÇÜSÜ : 400X4200MM MOTOR : 22 KW MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 4 kW (5,44 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebnega visoko trdnega, kaljenega in brušenega materiala Vodoravni in navpični delovni položaj Standardni kaljeni valji Ločena premična upravljalna plošča Mehanski ročni bočni omejevalniki v 3 smereh Natančno krivljenje z zavoro na motorju 2 digitalna prikazovalnika OPCIJSKA OPREMA Laodpfx Aow Smhwol Nsa Valji za krivljenje cevi in profilov Dvodimenzionalni hidravlični bočni omejevalniki po izbiri Avtomatizacija z NC krmilnikom TEHNIČNE SPECIFIKACIJE Premer zgornje osi: 60 mm Premer spodnje osi: 50 mm Premer valja: 180 mm Delovna hitrost: 6 m/min Moč motorja: 3,75 kW Dolžina: 1200 mm Širina: 850 mm Višina: 1200 mm Teža: 955 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option Lajdpfx Alew Slbvs Nea TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet, aluminum, or stainless steel materials Ideal for bending round and various diameter materials Lower and side rolls move vertically by direct hydraulic linear movement Protected against overloading The upper roll is driven by an electric motor and planetary reducer. The lower roll is powered via a cardan coupling system. Two rolls have powered rotation Positions of the rolls can be easily read via three digital displays The hydraulically opening head allows easy removal of the bent part Very easy operation with mobile control panel Laodpjw Slkkefx Al Nja Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel shaft movement Complies with EU safety standards and is CE marked Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via body-mounted hydraulic cylinders * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC automation with control panel * Upper crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll Diameter: 380 mm Lajdpfxsw Smc Ie Al Nsa Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.070 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 130 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS Lsdpfxjvyr Die Al Nsaa GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES • Steel construction frame • Stress relief by vibration for body and welded parts • Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards • Pneumatic clutch and brake combination – OMPI-Italy • Ram mounted on 8 sliding guides • Ram with cushioning cylinder • Ram, connecting rod, and ram nose made from cast steel GS52 • High strength one-piece crankshaft – 4140 • Bronz bushing inside the connecting rod (Zr14) • Rear flywheel configuration • Spare bolster • Hydraulic overload protection • Motorized die height (ram) adjustment • Automatic central lubrication system • Pneumatic pedal with latch and dual-hand control with timer • Electrical counter • PLC control and touch screen – DELTA • Electrical switchgears by SIEMENS-SCHNEIDER • CE application – OPTIONAL • Finger safety light curtains – SICK, LEUZE • Safety PLC (controls all electrical system, valves, dual-hand, and foot pedal) – PILZ • Dual-coil safety valve – GPA , TOPAIR • Locked position switch and control panel • Safety block • Protective guards within CE requirements TYPE: D-TYPE MONOBLOC FRAME Capacity: 200 Tons Distance Table to Ram: 500 mm Distance Between Uprights: 1150 mm Ram Adjustment: 130 mm Approx. Press Width: 1500 mm Approx. Press Depth: 2000 mm Approx. Press Height: 3200 mm Bolster Hole Diameter: 240 mm Bolster Size: 800 x 1070 mm Die Clamping Slot Diameter: 60 mm Ram Size: 450 x 800 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 / 160 mm Strokes Per Minute: 40 SPM Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 14,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 850 mm, dolžina mize: 1.150 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration for frame and welded parts - Parallelism and perpendicularity tolerance between tables complies with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram guided on 8 slides - Ram cushioning cylinder - Parts such as ram, connecting rod, and slide are steel cast, GS52 - High strength one-piece crankshaft – 4140 - Connecting rod inner bronze (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication - Pneumatic foot pedal with latch and time-controlled dual-hand operation - Electronic counter - PLC application and touchscreen – DELTA - Electrical switchgear components SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Finger guard light barriers – SICK, LEUZE - Safety PLC (monitors complete electrical system, valve, dual-hand, and pedal) – PILZ - Double coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective guards in compliance with CE standards TYPE D-TYPE MONOBLOCK FRAME Capacity 250 Ton Table-to-Ram Distance 520 mm Clearance Between Side Frames 1230 mm Ram Adjustment 150 mm Approx. Press Width 1600 mm Approx. Press Depth 2100 mm Approx. Press Height 3400 mm Table Bore Diameter 240 mm Ledpfx Asvyr D Asl Neaa Table Dimensions 850 x 1150 mm Die Clamp Slot Diameter 60 mm Ram Dimensions 470 x 900 mm Floor-to-Table Height 950 mm Stroke Adjustment 20–160 mm Strokes per Minute 40 SPM Motor Power 22 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 16,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 40 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly by means of pistons hydraulically attached to the frame. * Protected against overload. * The upper roll and side rolls are driven by a hydromotor and planetary gearbox (all three rolls are motor-driven). * The positions of the rolls are easily readable via three digital displays. * Easy removal of the rolled part thanks to the hydraulically opening head and the automatically lifting shaft. * Very easy operation with a movable control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Cone bending system. * Central lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * NC and CNC control for automation. * Top crane (elevator) for supporting large diameter bending. * Hydraulic side supports for supporting large diameter bending. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Ljdoxw Ebxjpfx Al Noaa Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg