Brema (Biesse Group) N.c. Vrtanje In Dugi Vstavljanje Line nakup rabljenega (123.693)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs. Number of vertical drilling heads: 4 pcs. Weight: 1,500 kg Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm Width with table extension: 2,300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on the setup and configuration, you can: - Drill for handle olives in the loose frame part or for finished sashes, with multi-spindle drilling head, quick-changeable, also for routing of lock case recesses for RC 2/security transmission - Drill for corner bearings in the loose frame part, with multi-spindle drilling head, quick-changeable, orientation by stop or measuring (tilt windows) - Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part - Milling vertically from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, different drill diameters, dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions, corner joints, front doors etc. - Horizontal milling for lock case / hardware etc. Machine Description - Base frame in robust welded construction, linear guide for X-axis - Table support 3,000 x 200 mm - 6 pneumatic clamping cylinders with automatic retraction - 2 side stops for end grain machining, manually retractable - 2 longitudinal stops manually extendable/retractable Travel Ranges: - X-axis – 3,000 mm effective length - Y-axis – 180 mm - Z-axis – 105 mm Units: - 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 - 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor, speed 3,000 rpm, with quick-change drilling head system - 1 drilling head BKF 3, for olives, quick-changeable - 1 drilling head BKF 3/2 for corner bearings, quick-changeable - 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor, 1,500 - 16,000 rpm, collet chuck ER 25 - 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm, collet chuck ER 20 - 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control X, Y, Z NC Position Controller by B + R, input via 10" TFT display Machine complete with 1 set of drill tools Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm, Rodpfx Aed Ih Hqjmfjcf CE compliant, ready to connect Extraction connection: 1 x Ø 120, 1 x Ø 80 mm Power supply: 1 x 400 V, 16 Amps Air supply: 1 x Ø 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable, dimension input by rebate or light measurement possible Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg ----- Total price in the above configuration, ex-works: upon request Plus delivery and installation/training (Technical information according to manufacturer – without guarantee!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Production Line for NBR and PVC Insulation Sheets for Rubber Extrusion / Immediately Available The production line is in like-new condition, has very few operating hours, and is available for immediate delivery. Components of the production line: 1. 150 mm 20D cold vacuum extruder (standard) 2. Pneumatic rubber sheet die head 3. 6 m infrared curing oven (width 1000 mm) 4. 6 m hot air curing oven (width 1140 mm) 5. 6 m hot air curing oven (width 1440 mm) 6. 6 m hot air curing oven (width 1600 mm) 7. 6 m hot air curing oven (width 1800 mm) 8. 6 m hot air curing oven (width 2000 mm) 9. 6 m hot air curing oven (width 2300 mm) 10. 6 m hot air curing oven (width 2500 mm) 11. 6 m hot air curing oven (width 2800 mm) 12. 36 m (in 3 sections of 12 m each) conveying and cooling system 13. Automatic sheet cutting and edge trimming machine (one) 2000 mm 14. Large cooler with water tank 15. Gas heating unit 16. PLC control system Rcedpfxjy Exrpe Amfsf If you are interested, we will gladly send you a detailed description and the corresponding technical data.

Stanje: novo, Leto izdelave: 2026, CNC-krmiljen stroj za vrtanje in montažo okovja z magazinom za samodejno obdelavo pokrovnih spon in montažnih plošč. Robustnost, dolga življenjska doba in enostavno upravljanje so značilnosti naših avtomatskih CNC-krmiljenih strojev za vrtanje in montažo. Kratek opis: • CNC-krmiljen avtomat za vrtanje in vtiskovanje pokrovnih spon za visoko kapaciteto • Fleksibilnost zaradi CNC-krmiljenja • Masivni in robustni vrtalni agregati GANNOMAT • Vtiskovalna matrica iz jekla za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostno krmiljenje z detektorjem kovin (opcijsko) Rcsdpfsdx A U Hex Amfof

Stanje: novo, Leto izdelave: 2026, Avtomatski vrtalni in montažni stroj z magazinom za avtomatsko obdelavo skodeličnih spon in montažnih ploščic. Naši avtomatski vrtalni in montažni stroji odlikujejo robustnost, dolga življenjska doba in enostavno upravljanje. Kratek opis: • Avtomat za vrtanje in vtiskovanje skodeličnih spon za visoko kapaciteto • Masivne in robustne vrtalne enote • Jeklena vtiskovalna matrica za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostno krmiljenje z detektorjem kovin (opcijsko) Rcjdpsdx A U Dsfx Amfjf

Stanje: novo, Leto izdelave: 2020, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52AMG162, priključek za stisnjen zrak: 6 letvica, delovna širina: 560 mm, trajanje garancije: 12 meseci, obratovalna hitrost: 400 mm/s, Komfi Laminator Amiga 52I (Inteligentno linijsko podajanje) Nov, proizveden leta 2020 Tehnične specifikacije: Maks. hitrost laminacije: 25 m/min Maks. izhodna zmogljivost: 8.000 pol/uro Min. dimenzije pol: 200 × 250 mm Maks. dimenzije pol: 560 × 800 mm (ali do 1.016 mm) Gramatura papirja: 115-600 g/m² Debelina papirja: maks. 0,7 mm (pri prekrivanju > 0) / maks. 1,4 mm (pri prekrivanju < 0) Maks. višina kupa papirja: 6 cm (odvisno od dolžine pola) Debelina laminirne folije: 24–50 μm; OPP, PET, Nylon Natančnost prekrivanja pol: ± 1 mm Podajalnik: Inteligentno linijsko podajanje (povezava s tiskalnikom) Laminacijska enota: Nastavljivi omejevalniki razdalje na laminacijski enoti omogočajo obdelavo debelejših materialov in laminacijo oken. Med delovanjem bočno nastavljiva odpenjalna gred z nastavljivo zavorno silo. Višinsko nastavljiv in odstranljiv razmazni valj popolnoma odstranjuje gube v laminatu. IR gretje za laminacijski valj. Temperaturni senzor znotraj valja za natančno regulacijo. Pritisk valja prekrit z gumo. Močan pnevmatski tlačni sistem zagotavlja enakomeren pritisk in popolne rezultate laminacije. Separator in odlagalna enota: Rjdpfxszb Db Ho Amfocf Enota za ravnanje (decurling) iz prečke in valja z možnostjo pozicijskega nadzora za samodejno prilagoditev točke upogiba ob spremembi položaja. vgrajen perforator folije za ločevanje pol. Odmično gnani ločilni valj z nastavljivo silo trganja, izhodni valj in kolesce za poravnanje pol. Fiksna odvodna miza z nastavljivimi zračnimi šobami.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20241202, skupna višina: 860 mm, skupna masa: 320 kg, skupna dolžina: 1.170 mm, skupna širina: 1.170 mm, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 150 l, uporabna prostornina rezervoarja: 100 l, vhodna napetost: 400 V, širina obdelovanca (maks.): 170 mm, višina obdelovanca (maks.): 170 mm, zunanji premer: 170 mm, dolžina obdelovanca (maks.): 170 mm, notranja širina: 260 mm, moč: 2,2 kW (2,99 KM), vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, nosilnost: 60 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The Vibra-Line DK rotary vibrator features an open, domed chamber with a capacity of 150 liters. This model is equipped with a pneumatically controlled automatic discharge system and a sound-insulated cover, ensuring comfortable and quiet operation. Rcodpsviu Ehefx Amfsf The U-shaped inner chamber is lined with a 22 mm thick polyurethane (PU) coating, providing exceptional resistance to process wear. The 150-liter capacity allows for loading approximately 50 to 100 liters of metal parts per batch, depending on their shape and size. The wide drum and low discharge height make it significantly easier to unload processed parts. Machine control is managed via a frequency converter with stepless speed regulation, operated through a 5.5-inch touchscreen. Process times, languages, and speeds can be quickly and easily adjusted here. Additionally, the control unit manages two external connections, which can be used for process water and compound dosing. The Vibra-Line 150DK rotary vibrator is delivered as a plug-and-play solution and requires only a 16-amp CEE plug, 4 bar compressed air, and a water connection for commissioning. Our equipment complies with EC machinery/device directives and is supplied with a manufacturer's declaration of conformity and CE marking.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Maier ML 32 D pro Line s priključkom FMB Rcjdjy D Nwaspfx Amfof je visokoprecizen CNC stružni avtomat z dolgim vodenjem (Swiss-Type) za zahtevno obdelavo kovin. Tehnični podatki: Glavna in protivretena • Največji premer struženja: 32 mm • Največji prehod vretena: 32 mm • Največji hod vretena (dolžina struženja): do 310 mm • Hitrost vrtenja vretena (glavno & protivreteno): do 6.000 vrt/min • Moč vretena (glavno vreteno): 5,5 kW • Moč vretena (protivreteno): 3,7 kW • C-os: prisotna na glavnem in protivretenu (0,001° oziroma 5° mehansko indeksiranje) Osi in krmiljenje • Število osi: 9 krmiljenih CNC osi (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3) • Hitrost hitrega pomika: 32 m/min • CNC krmiljenje: MAIER PRO – GE FANUC (Fanuc 18iT) Orodni sistem in obdelava • Skupno število orodnih postaj: do 24 orodnih postaj (od tega do 16 pogonjenih/rotirajočih, odvisno od konfiguracije) • Prečna obdelava: običajno 5 do 6 fiksnih rezil (presek stebla 16x16 mm) in 4 pogonjene postaje • Zadnja stran obdelave: omogočeno za sočasno delo na glavnem in protivretenu Dimenzije in teža • Teža stroja: cca 3.800 kg do 4.200 kg (samo masa stroja, brez podajalnika palic) • Dimenzije (D x Š x V): cca 2.640 mm × 1.600 mm × 1.900 mm • Kapaciteta hladilne tekočine: cca 240 litrov

Stanje: zelo dobro (rabljeno), CNC flexible system for drilling, milling and dowel insertion BECKHOFF control (Windows-based software) Workpiece length min/max: 260 mm / 2500 mm Workpiece width min/max: 96 mm (*) / 1200 mm Workpiece thickness min/max: 13 mm / 25 mm Rsdpfxsy N Ucfs Amfscf (*) Panel width min. 120 mm at the 3rd BAT for dowel insertion A) 'Igel' panel magazine for loading with a transverse infeed roller conveyor B) 1st pass CNC Model BAT-DTW - 2 drilling gears with 21 spindles each (2 x 2.2 kW) - 1 grooving saw (2.2 kW) - 2 grooving saws for back panel grooves (2 x 0.37 kW) - 2 drilling gears with 12 spindles each (2 x 2.2 kW) - 1 router for cross blind groove (4.4 kW) C) 2nd pass CNC Model BAT-DTW - 4 drilling gears with 9 spindles each (4 x 1.6 kW) - 2 angle drilling gears with 3 spindles each (2 x 1.6 kW) - 1 router (4.4 kW) - 2 drilling gears with 5 spindles each (2 x 1.6 kW) D) 3rd pass CNC Model BAT-DTW - 1 horizontal glue application device (with glue pump and 13-way air glue distributor) - 1 dowel unit - Milling unit with 8-position tool changer (5 collets) - Drilling unit with 12 individually controllable twin spindles

Stanje: novo, Premer vrtine, spremenljiv mm Število vrtalnih glav, vodoravno: 3 kosi Število vrtalnih glav, navpično: 4 kosi Dimenzije (dolžina/širina/višina): 6100x1500x2300 mm Rcsdpoif Az Ujfx Amfef Teža: 950 kg 1 NOVO vrtalno-freziarski center Götzinger Power Drill 300 Z Götzinger PowerDrill lahko, glede na vrsto in izvedbo: - vrtate v vzdolžni in prečni smeri - vrtate vstavne kote za vrata, podstavke in okvirje - vzorci vrtanja so prosto programirljivi - vrtate lahko: prijemalne puše in utorne ležaje z vrtalnimi glavami s hitrim sistemom za menjavo - vrtate in frezate lahko: ohišja ključavnic, ročaje in cilindrične ključavnice ter 3D-tečaje - stroj ima horizontalno in vertikalno frezalno glavo - enostavno upravljanje omogoča pripravo, shranjevanje in ponovno uporabo programov za vrtanje in freziranje Osnovna konstrukcija, stabilna izvedba, obložena s pločevino Podpora za mizo: 1800 x 200 mm Obdelovalna enota: Osnica X – 500 mm, uporabna dolžina Osnica Y – 0-120 mm Osnica Z – 0-105 mm (nad mizo) Horizontalne enote: 1 horizontalna vrtalna enota (enota za vrtanje vstavnih kotov, leva) ----- Vrtalni motor, 220 V, 1,1 kW Vpenjalna glava ER 25 4.000 – 11.000 vrt/min, nastavljivo 1 horizontalna frezalna enota za ohišja ključavnic ----- Frezalni motor, 2,2 kW Število vrtljajev, nastavljivo: 3.000 - 16.000 vrt/min Vpenjalna glava ER 25 1 horizontalna vrtalna enota (enota za vrtanje vstavnih kotov, desna) ----- Vrtalni motor, 1100 W, brezstopenjsko nastavljivo 4.000 - 11.000 vrt/min, z vpenjalno glavo ER 25 Vertikalne enote: 1 vertikalna vrtalna enota ----- Vrtalni motor, 1100 W, brezstopenjsko nastavljivo 4.000 - 11.000 vrt/min, z vpenjalno glavo ER 25 1 vertikalna vrtalna enota - z nastavljivim sistemom za hitro menjavo vrtalnih glav ----- Vrtalni motor, 1,1 KW, 3.000 vrt/min Vključno z: 1 vrtalna glava BKF 2/3, za utorne ležaje, vključno z garnituro svedrov, hitra menjava ----- Kot posamezen del, razporeditev svedrov po želji stranke 1 vrtalna glava BKF 3, za puše, vključno z garnituro svedrov, hitra menjava ----- Kot posamezen del, sveder 1 Kubo d= 25, 2 x sveder DÜBO d = 10 1 vertikalna frezalna enota za ohišja ključavnic ----- Frezalni motor, 2,2 kW Število vrtljajev, nastavljivo: 3.000 - 16.000 vrt/min Vpenjalna glava ER 25 1 kos dolžinskega vodila, levo in desno, uporabna dolžina 2,7 m, upravljanje s CNC Upravljanje: elektro-pneumatsko, z enotami na treh oseh CNC-krmilnik za pozicioniranje in integrirana funkcija stroja Vnos podatkov prek TFT zaslona, 10", barvni Stroj je v celoti opremljen, v skladu s standardom CE, z 1 garnituro vrtalnih orodij, DÜBO, vsak 1 x d = 6,8, 10, 12 + 2 grobi rezalniki d = 16, pripravljen za priključitev Dimenzije za transport: Stroj D x Š x V = 2,50 x 1,50 x 2,30 m, teža 850 kg Dolžinsko vodilo D x Š x V = 6,00 x 0,30 x 0,30 m, teža 100 kg ----- Skupna cena v navedeni izvedbi, tovarniška cena: na zahtevo Povečanje za stroške transporta in montaže/usposabljanja (Tehnične specifikacije po podatkih proizvajalca – brez jamstva!)

Stanje: rabljeno, Leto izdelave: 2007, z enoto za podajanje za oblikovane dele z navedbo talilnega lepila Odlično stanje očiščeno, funkcionalno preverjeno, testirano, poskusni zagon Rodpfx Amjvwgizsfscf rabljeno, v dobrem stanju znamka Artech-Biesse tip Single leto izdelave 2007 št. stroja 91009 CE certifikat z avtomatskim krajšanjem robov, lepljenje zaokroženih robov nastavljiva podlaga – lepljenje poševnih robov Izvlečna razširitev mize z valjčno podporo podajni sistem – brezstopenjsko nastavljiv debelina robu 0,4 - 3,0 mm Višina obdelovanca min 10, maks. 120 mm potrebni prostor pribl. 1400 mm x 1000 mm x 1600 mm teža pribl. 320 kg Skupna priključna moč 5,2 kW Lokacija skladišča 97447 Gerolzhofen, brezplačno naloženo, nepakirano Predaja v trenutnem stanju, kot je bilo ogledano, brez garancije in jamstva.

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel insertion Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Powered roller conveyor "RBO" with 90° workpiece rotation unit B) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool magazine with 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) C) Transfer connection with turner (180° overturn, top side down) "RBO" Ribaltatore D) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal drilling units (1 right + 1 left) with 4 heads each with 18 spindles (36R+36L), total 72 Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit 2 horizontal boring units (1 right + 1 left) each with 5 insertion nozzles (5LH + 5RH), total 10 nozzles Rodpsyhqa Aefx Amfjcf F) Dust extraction and cleaning machine "WANDRES"

Stanje: novo, Premer vrtine, spremenljiv, mm Število vrtalnih glav, horizontalno: 1 kos Število vrtalnih glav, vertikalno: 0 kos Götzingerjeva vrtalna, lepilna in vstavna naprava BLE ----- Z napravo BLE se obdelovanci lepi in zapirajo z lesenimi čepi na čelni površini. Po želji se lahko naprava BLE dopolni z vrtalno skupino, skupino za obdelavo protipovršine in vzdolžnim vodilom. 10-palčni zaslon na dotik omogoča enostavno upravljanje, tako za ročno kot za spletno uporabo. Osnovno ohišje: v kompaktni izvedbi, z oblogo iz pločevine Nosilna plošča: približno 800 x 200 mm Poz. 1 ----- 1 lepilna postaja Ventil za popoln curek Nanos lepila, natančno nastavljiv Lepilna pištola za nanašanje lepila na protipovršino Poz. 2 ----- 1 lepilna črpalka iz nerjavečega jekla, črpalka za visok tlak in lepilna cev Poz. 3 ----- 1 vstavna postaja z ločevanjem lesenih čepov in vstavnim valjem Poz. 4 ----- 1 vibracijski transporter za lesene čepe, premera 8 x 60 mm, s cevjo za dovajanje v vstavno skupino Poz. 5 ----- 1 obdelovalna skupina s križnim stolom, linearnim vodilom in 3NC-motorji X = 200 mm, širina obdelave Y = 120 mm, višina obdelave Z = 50 mm, globina vstavitve Poz. 6 ----- 1 krmilnik za pozicioniranje 10-palčni barvni zaslon na dotik Lahko se ustvari in shrani 500 vrtalnih vzorcev, ki jih je po potrebi mogoče enostavno priklicati Rcodpou Uu Uzefx Amfof (1 vrtalni vzorec lahko vsebuje do 16 položajev lesenih čepov) Pripravljeno za spletno povezavo Pri spletnem upravljanju je treba podatke za upravljanje pripraviti v programski opremi. Naš stroj lahko te podatke nato prebere in obdela. ----- Skupna cena v tej konfiguraciji, od poz. 1 do poz. 6: na zahtevo! Možnosti z dodatnim stroškom: ----- Poz. 7 ----- 1 vrtalna skupina, horizontalna, vrtalni motor 1.000 W Število vrtljajev: 4.000 - 8.000 vrt/min, vpenjalno prijemalo, pnevmatični vrtalni pomik Dodatni strošek: 4.565,00 EUR Druge dodatne možnosti, kot je večji zaslon na dotik, dodatna postaja za lesene čepe za dodatne velikosti lesenih čepov ali skener za izbiro programa ali celo nanašanje lepila na plošče, na zahtevo! Cene neto, plus zakonski DDV, brez embalaže/pošiljanja in brez zagona. ----- (tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: Redpfx Amoh T Dvtsfscf KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: novo, Bore diameter variable, mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Götzinger Power Drill in special design with dowel gluing and insertion station With the Götzinger PowerDrill, depending on the type and configuration, you can: - Drill on face and longitudinal sides - Dowel door leaves, mounting timbers, transoms - Freely program drilling patterns - Drill for handle olives and corner bearings with quick-change multi-spindle drilling heads - Mill and drill lock cases, handles, euro-profile cylinders (PZ), and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Easy control system allows you to create, save, and recall drilling and milling programs POWER DRILL – Drilling and Milling Machine Universal drilling machine for drilling olives, corner bearings, doweling on the face and longitudinal sides, milling, lock cases, hinges, etc. Base frame in robust construction, sheet metal cladding Table support: 1800 x 200 mm Machining unit: X-axis – 500 mm effective travel Y-axis – 100 mm Z-axis – 105 mm 1 horizontal drilling unit (left dowel drilling unit) Drill motor 380 V, 1,100 W Collet chuck d=8/10 4,000–11,000 rpm, adjustable 1 vertical drilling unit from above – fixed mount Drill motor 1.1 kW, 3,000 rpm Quick-change drill head system Rcedsd Ih Hyopfx Amfsf 1 quickly changeable BKF 2/3 drill head, for corner bearings Includes spare drill bit and customer-specific fittings Control: electro-pneumatic with three axes, NC positioning controller, integrated machine functions Input via TFT 10" color display Machine complete, CE-compliant, with 1 set of drilling tools: Each dowel size 1 x d=6, 8, 10, 14 mm, plus 2 rough cutters d=16 mm, 1 cutter d=20 mm, ready for connection 1 BKF 3 drill head, quick-change, for olives, including spare drill bit, customer-specific fittings 2 drilling units: 1 x horizontal for overhead drilling (for hinges) 1 x vertical for doweling, right side Drill motor 1,100 W, infinitely variable speed 4,000–11,000 rpm with ER 20 collet chuck 2 milling units for lock cases: 1 x horizontal for hinges, lock cases 1 x vertical from above for euro-profile cylinder (PZ), handles, hinges Milling motor 2.2 kW Speed adjustable 3,000–16,000 rpm ER 25 collet chuck 1 length stop, left and right, usable length 2.8 m, NC-controlled When using the length stop, fixed stops are not used. Dimensions: LxWxH = 2.50 x 1.50 x 2.20 m – machine weight 850 kg PowerDrill LxWxH = 0.30 x 0.30 x 6.00 m – length stop weight 100 kg 1 dowel gluing and insertion station consisting of: - Vibratory feeder drive for dowel supply - Dowel insertion station - High-pressure stainless steel glue pump with glue tank - Full jet valve for precise clean glue application - Blow-off nozzle Additional price for 1 dowel diameter This increases the base machine length by approx. 300 mm (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: zelo dobro (rabljeno), YZ0105) PANEL SAW WITHOUT REAR TABLE, Model HPP 300/56/56 PROFILINE Control: Power Control POWER TOUCH, Software: CADmatic 4 - Professional No. 1 Rear Push Device – (PACK PREMIUM). No. 11 Clamping Grippers (1 x Power Concept) Max. Cutting Width (mm): 5600. Usable Infeed Stroke (mm): 5600. Max. Saw Blade Projection (mm): 80 Scoring Saw (max. saw diameter/power): 180 mm / 1.5 kW Main Saw (max. saw diameter/power): 350 mm / 11 kW (optionally 18 kW) Adjustable Saw Carriage Feed (m/min): 1 - 150 No. 5 Front Air Cushion Tables (mm 500 x 2810) Label Printer: PICA II 108 YZ0106) AUTOMATED PANEL STORAGE, Model TFL 211/10/05 Total Space Requirement (incl. panel saw): mm 10640 x mm 55660 Rodpfsfg Ewzex Amfjcf Mobile Upper Bridge (X-axis) with traversing carriage (Y-axis) and corresponding vacuum suction unit (movable on Z-axis) Max. Speed of Mobile Upper Bridge (X-axis): 110 m/min Carriage Speed (Y-axis): 130 m/min Vacuum Suction Cup Assembly Speed (Z-axis): 70 m/min Vacuum Suction Cup Unit, rotatable by 90° Automated TLF Management System (via scanner) for cut panels (which remain in storage) Minimum dimensions: mm 800 x 2000 Stack Dimensions: Min. mm 2600 x mm 800 / Max. mm 5600 x mm 2200 Panel thicknesses (min/max): mm 12 / 40 Stack Height: mm 1000 Min. Panel Dimensions: mm 800 x 2000. Max. Panel Dimensions: mm 2200 x 5600 (ST 61)

Stanje: zelo dobro (rabljeno), CNC flexible system for drilling and dowel insertion. Machine control: BECKHOFF Consisting of: A) Plate storage ‘Igel’ for loading B) 1st pass-through CNC, model BAT-DTW C) 2nd pass-through CNC, model BAT-DTW D) 3rd pass-through CNC, model BAT-DTW E) 4th pass-through CNC, model BMA-DLS, for drilling, assembly, glue application, and insertion F) Conveyor technology G) Buffer section and RW feed automation, model RWA/RWZ-CNC Rsdem Uyngspfx Amfocf H) Feeding and turning unit, ZWA-1-CNC I) Body press, model KP-3-CNC L) Conveyor technology / final assembly

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED DESTACKING - Bridge Rodpfx Amsd Rg Dzefscf Vacuum system (with pump) No. 2 vertical support columns of the upper carrying beam No. 1 horizontal upper carrying beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with vacuum suction cups, adjustable No. 2 external roller conveyors for stack discharge No. 1 external motorized roller conveyor for stack discharge, also with belt for rotation of panels by 90°. Dimensions approx. 7168 mm Separate electrical control panel Electronic controller OMRON Perimeter safety fencing with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 - 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups Rodpfx Amjd Rg Dpefecf No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 125102018, Proizvajalec: TMA Automation sp. z o.o., leto proizvodnje: 2018 OPIS KOMPLETA Na prodaj je celoten komplet dveh koordiniranih robotskih sistemov kartesijanskega tipa, proizvedenih s strani poljske družbe TMA Automation, namenjenih za uporabo v strojih za brizgano oblikovanje. Komplet je sestavljen iz linearnega robota MIDI LINE in modula za notranje etiketiranje UNI LINE (IML). Roboti so delovali v proizvodnem obratu in njihovo delovanje je potrjeno s tehnično dokumentacijo (TDR). V kompletu je vključena vsa potrebna dokumentacija. TEHNIČNI PODATKI Robot MIDI LINE (serijska številka: 125102018) Dimenzije (dolžina x širina x višina) 2400 x 2060 x 1435 mm (višina je spremenljiva), masa 600 kg, nosilnost 8 kg, doseg osi Z 2300 mm, doseg osi Y 1400 mm, doseg osi X 1400 mm, napetost napajanja 400 V / 50 Hz, moč 4,5 kW, delovni tlak zraka 6,5 bar Redpfx Aozwdx Nomfocf Robot UNI LINE z modulom IML (serijska številka: 126102018) Dimenzije (dolžina x širina x višina) 2540 x 1000 (1370) x 2090 mm, masa 550 kg, nosilnost 8 kg, doseg manipulatorja 1100 mm, napetost napajanja 400 V / 50 Hz, moč 1,5 kW, delovni tlak zraka 6,5 bar OPREMA V KOMPLETU Na dotik občutljiv upravljalni panel z varnostnim gumbom STOP (e-stop), upravljalna programska oprema z naslednjimi funkcijami: samodejni način, ročni način, način brez etiket, način brez jemanja izdelka, arhiv programov, modul za grafike in alarme; celotna tehnična dokumentacija, oznaka CE za oba stroja. TEHNIČNO STANJE Roboti iz leta 2018, uporabljeni v industrijskih pogojih (brizgano oblikovanje plastike). Upravljalni panel je aktiven, ob dokumentiranju so izbrane nastavitve programa PRG 2, delovne hitrosti: ročni način 22 %, samodejni način 17 %. Na slikah je vidna rdeča signalna luč, ki označuje ustavitev robota (pripravljeno stanje, ne gre za okvaro). Pred nakupom priporočamo: osebni ogled in poskusno zagon na namenski lokaciji. POGOJI PRODAJE Prodaja samo kot komplet. Osebni prevzem. Transport je odgovornost kupca.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a CNC dowel boring machine with dowel insertion unit BIESSE COMIL INSIDER KTC, year of manufacture 2002. - 2 pcs. CNC boring heads from the sides - 1 pc. glue injection head - 3 pcs. 3Master vibratory dowel insertion units Part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory installation - line Years of manufacture: 1999-2001 Rjdpfx Amst N Rixofscf It is possible to sell the machines separately. Vibratory feeders and motorized conveyors included in the offer. For more photos and details, please send an enquiry.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, Delovna širina: 6,0 m Debelina upogibanega materiala: 1,25 mm jekla Letnik proizvodnje: 1989 Stanje: Dobro vključno z motorično rezalno glavo Rcjdpfozu Ilzox Amfsf vključno z digitalnim upravljalnikom (nadgrajeno)

Stanje: novo, Leto izdelave: 2026, Samodejni stroj za vrtanje in vstavljanje okovja z zalogovnikom za avtomatsko obdelavo spojniki in montažnih plošč. Naši avtomatski stroji za vrtanje in montažo odlikuje robustnost, dolga življenjska doba in enostavna uporaba. Kratek opis: • Stroj za vrtanje in vtiskovanje spojniki za visoko kapaciteto • Masivni in robustni vrtalni agregati • Tiskalna matrica iz jekla za dolgo življenjsko dobo Rcodpedx A Urofx Amfef • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostni nadzor z detektorjem kovin (opcijsko)

Stanje: dober (rabljeno), Bacciottini Pit Stop DG LINE 8000 Avtomatski stroj za biganje Popolnoma delujoč in pripravljen za uporabo. Rcodpfx Amezt H Raofef To je najučinkovitejši sistem za biganje in perforacijo na trgu, ki se ponaša z robustno zasnovo. Izdelano v Italiji. Neprekinjeno vakuumsko podajanje z možnostjo dodajanja materiala med delovanjem. Vgrajen kompresor. Komplet vključuje orodja za biganje in perforacijo. Tehnični podatki: Največja dimenzija lista: 500 x 700 mm Najmanjša dimenzija lista: 80 x 100 mm Maksimalna hitrost (za A4 format): 8000 listov/uro Teža materiala: 80-400 GSM Največje število big na list: 20 Razdalja med bigami: 0,1 mm Natančnost nastavitve: 0,1 mm Napajanje: 230 V Poraba energije: 2 kW Teža: 180 kg Dimenzije: 1500 x 750 x 1200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 2002. - 2 pcs. CNC drilling heads from above. - 1 pc. grooving saw - 2 pcs. SARG vibration dowel insertion units - 1 pc. vacuum underpressure pump This is part of a Biesse line consisting of: COMIL Insider dowel insertion - milling - grooving - dowel insertion - glue application - accessory application - line Rcedpfjt N Rkvox Amfof Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration dispensers and motorized conveyors are included in the offer. For more photos and details, please send an inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje os Z: 500 mm, Komaj uporabljena nastavitev. Rcjdpfezni Rrex Amfof Ponudba vključuje tudi omarico in tiskalnik etiket. Naprava je v odličnem stanju, glejte slike. Napravo je mogoče ogledati v delujočem stanju. Dostava je možna, vendar z dodatnim stroškom.