Atm Okf Lsl 15130 nakup rabljenega (452)

Stanje: rabljeno, prevoženi kilometri: 251.000 km, moč: 140 kW (190,35 KM), prva registracija: 04/2018, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, skupna višina: 2.850 mm, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, RTW 519 WAS Box-Body, Year 2018 Internal no.: Fz 009 Equipped with new ENGINE, original Mercedes reconditioned engine (includes original Mercedes warranty) and overhauled transmission. Near-mint condition, fully rebuilt with absolutely all wear parts replaced with new. 4 units in stock – available for immediate delivery (as of 04/2023). We offer a 12-month warranty on these vehicles, which can optionally be extended up to 36 months. MB Sprinter Ambulance according to DIN EN 1789 / DIN EN 13500 Sandwich box body including additional hot water heater, and more. * Sandwich construction, aluminum * Rear portal: work lights, rearview camera * Vehicle lights and strobe lights * Rear step with sprung collision protection * Ceiling console, patient compartment floor, door configuration, pull-out cabinets, compressor fridge, flap device holders, oxygen lines, CAN bus blue light system, centralized electrical system, external compartment lighting and interior lighting per common EU ambulance standards. * Each stretcher mounting system is adaptable and installable. Very good, immediately operational condition. Vehicle is reconditioned, no dents or scratches. Stretcher available at extra cost. Features: ABS + ASR, ESP, 2x airbags, electrical exterior mirrors, electric windows, 2 batteries (12V, 88 Ah), engine pre-heating, auxiliary heater, power steering, reinforced stabilizer, tachograph, air conditioning, immobilizer, rear work light, 220V external connection, fire extinguisher, center armrest, rearview camera, reading lamp, radio pre-installation, optical and acoustic warning system (lightbar & front flashers). Financing or leasing options available! Our used special vehicles are inspected, reconditioned, and maintained by a skilled team of special vehicle technicians, ensuring that both TÜV or DEKRA certification and immediate operational readiness of all ambulances are guaranteed. Vehicle is almost like new! We provide a 12-month warranty on this ambulance! Sale is without medical and technical equipment, which can, however, be purchased separately. Our service for you: * 20-40 ambulances always available in house for immediate delivery * DEKRA or TÜV inspection certificates upon request * FINANCIAL SERVICE – Financing, leasing, or hire purchase, tailored to your needs * WARRANTY – up to 36 months available for an additional charge * Accident replacement vehicles in stock * RECONDITIONING – All vehicles professionally prepared by our team Kodek Iyvnepfx Afvodl * For further vehicle offers and service points, visit us online We look forward to your call. The G&G Team is always available for you. We speak Italian, English, Polish, and Spanish and can certainly assist you in finding a good used ambulance. This advertisement is intended only as a preview of our vehicle and does not form part of a sales contract. Internet information represents non-binding descriptions and does not constitute guaranteed features. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to changes and prior sale.

Stanje: rabljeno, prevoženi kilometri: 176.000 km, moč: 140 kW (190,35 KM), prva registracija: 07/2020, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, skupna višina: 2.850 mm, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, New Model 907 / 519 CDI Ambulance (RTW) / WAS Box Financing or rental options available. The vehicle has been fully overhauled and is in near-new condition. MB Sprinter ambulance in accordance with DIN EN 1789 / DIN EN 13500. Sandwich box body including additional hot water heating, etc. * Sandwich aluminum/GRP box body with extended lowered rear compartment door, internal vacuum mattress door * Rear portal: work lights, reversing camera * Vehicle and strobe lights * Vehicle rear equipped with spring-loaded bumper / rear step * Ceiling center console, patient compartment floor, door design, pull-out cabinets, compressor refrigerator, folding equipment mounts, oxygen lines, CAN bus blue light system with central electronic unit, external compartment lighting and interior lighting according to standard EU ambulance specification (RTW) * All stretcher systems can be adapted and installed individually Excellent, immediately operational condition / vehicle is reconditioned and shows no dents or scratches / Stretcher available for additional charge / ABS + ASR, ESP / 2x airbags / electric external mirrors / power windows / 2x 12V 88Ah batteries / engine pre-heating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / rear work light, external 220V connection / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical warning system / lightbar & front flasher, acoustic warning system Financing or lease-purchase available! Our used special-purpose vehicles are inspected, reconditioned, and maintained by an experienced team of specialists from the special vehicle sector, guaranteeing that TÜV or DEKRA certification and the immediate operational readiness of all ambulances is standard. Kdodpfxek Iyvkj Afvsl Vehicle is almost like new! This ambulance comes with a 12-month warranty! Vehicle sold without medical and technical equipment; these can be purchased separately if required. Our service – for you! * 20-40 immediately available ambulances always in stock * DEKRA or TÜV certificate on request * FINANCIAL SERVICES – financing, leasing, or lease-purchase individually tailored to your needs * WARRANTY – available for up to 36 months for an additional charge * Replacement vehicles in stock in case of accident * RECONDITIONING – all vehicles are professionally prepared for you by our team * More vehicle offers and service points can be found at: We look forward to your call / The G&G Team is always at your disposal. We speak Italian, English, Polish, and Spanish – we can certainly help you find a quality used ambulance. This advertisement serves only as a preview of our vehicle and does not form any part of a purchase contract. Information provided online is non-binding and does not constitute guaranteed features. The seller accepts no liability for errors, mistakes in entry, or data transmission errors. Changes and prior sale reserved!

Stanje: rabljeno, prevoženi kilometri: 256.000 km, moč: 120 kW (163,15 KM), prva registracija: 02/2017, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, skupna višina: 2.850 mm, Leto izdelave: 2017, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, RTW 519 WAS Box Body Internal No.: Fz 107 Available immediately With a brand new genuine Mercedes Benz replacement engine (AT MOTOR) and refurbished transmission Incl. 12 months comprehensive warranty on the entire vehicle Warranty can be extended MB Sprinter Ambulance (RTW) according to DIN EN1789 / DIN EN13500 Sandwich panel box body including additional hot water heating, etc. * Rear portal: work lights, reversing camera * Vehicle lighting and warning beacons * Rear with sprung collision guard / rear step installed * Ceiling center, patient compartment flooring, door execution, pull-out cabinets, heated compartment, flap device holders, oxygen lines, blue light system, CAN bus central electrics, external storage compartment lighting, and interior lighting all conform to standard EU ambulance construction. * Any stretcher system can be installed and customized, Excellent immediate operational condition / Vehicle is refurbished, no dents or scratches / Stretcher available at extra cost / ABS + ASR, ESP / 2x airbags / electric exterior mirrors / electric windows / 2x battery 12V 88Ah / engine pre-heating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / rear work light, external 220V connection / fire extinguisher / center armrest / reversing camera / reading lamp / radio prep / visual warning system / roof bar & front flashers, acoustic warning system. Financing or lease-purchase possible!!! Our used special-purpose vehicles are inspected, refurbished, and serviced by an experienced team of specialists from the special vehicle industry, ensuring that a TÜV or DEKRA approval is as standard as the immediate operational readiness of each ambulance. Kdedpfekktyiex Afvel Vehicle is almost like new!!! We offer a 12-month warranty on this ambulance!!! Sale without medical and technical equipment, which can be purchased separately. Our service – for you! * 20–40 immediately available ambulances always in stock * DEKRA or TÜV approval if requested * FINANCIAL SERVICE – Financing, leasing, or hire purchase tailored to your needs * WARRANTY – up to 36 months available at extra charge * Replacement vehicles in case of accident available from stock * PROFESSIONAL REFURBISHMENT – all vehicles are professionally prepared by our team for you * More vehicle offers and services available at: We look forward to your call / The G&G Team is always available for you. We speak Italian, English, Polish, Spanish and can definitely assist if you are looking for a quality used ambulance. This listing serves solely as a preview of our vehicle and is not part of any purchase contract. Information provided online is non-binding and does not constitute guaranteed features. The seller assumes no liability for errors, input mistakes, or data transmission errors. Subject to change and prior sale!

Stanje: rabljeno, prevoženi kilometri: 244.000 km, moč: 140 kW (190,35 KM), prva registracija: 08/2017, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, Leto izdelave: 2017, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, RTW 519 WAS Box Body New original Mercedes replacement engine / Overhauled gearbox The entire vehicle has been completely overhauled 8 units in stock (as of now) Custom livery/decals upon request Includes Stryker Power Load stretcher mount Pneumatic Martin Horn (compressed air) Rear air suspension Warranty up to 36 months available Very, very good, immediately operational condition / Vehicle has been fully reconditioned, no dents or scratches / Stretcher available at extra cost / ABS + ASR, ESP / 2x airbags / electric exterior mirrors / electric windows / 2x 12 V 88 Ah batteries / engine pre-heating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / rear working light, external 220V connection / fire extinguisher / center armrest / rearview camera / reading lamp / radio pre-installation / visual signaling system / light bar & front strobe acoustic signaling system. Financing or hire purchase available!!! Our pre-owned special-purpose vehicles are inspected, reconditioned, and serviced by an experienced team of special vehicle technicians, ensuring the TÜV or DEKRA certification is as standard as the immediate operational readiness of all ambulances. An ultrasonic disinfection of the air conditioning system in both the driver's and patient compartments has been carried out. Vehicle is almost like new!!! We offer a 12-month warranty on this ambulance!!! Can be extended up to 36 months Sold without medical and technical equipment, but these can be purchased separately. Our service – for you! * 20-40 immediately available ambulances always in stock * DEKRA or TÜV certification available upon request * FINANCIAL SERVICES – Financing, leasing or hire purchase, tailored to your needs * WARRANTY – up to 36 months available for an additional charge * Replacement vehicles in stock for accident cases * RECONDITIONING – All vehicles are professionally prepared by our team for you * More vehicle offers and service points can be found at: We look forward to your call / The G&G team is always at your service. We speak Italian, English, Polish, Spanish and are sure we can help you if you are looking for a good used ambulance. Kdodpfx Aelb Nw Tofvjl This advertisement serves solely as a preview of our vehicle and does not form part of a sales contract. All online information is non-binding and does not constitute guaranteed characteristics. The seller is not liable for errors, entry mistakes or data transmission errors. Subject to changes and prior sale!

Stanje: rabljeno, prevoženi kilometri: 253.000 km, moč: 120 kW (163,15 KM), prva registracija: 10/2015, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 5, skupna višina: 2.850 mm, Leto izdelave: 2015, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, RTW 516 WAS Box Body Internal No: Fz 385 with new engine – original Mercedes ATM – and overhauled gearbox MB Sprinter ambulance according to DIN EN1789 / DIN EN 13500 Sandwich box body incl. additional hot water heating, etc. * Sandwich aluminium/GRP box body with lowered side-access compartment door and internal vacuum mattress door * Rear portal: work lights, reversing camera * Vehicle lights and flashing beacons * Rear of vehicle fitted with spring-mounted crash protection / rear step * Ceiling centre, patient compartment floor, door specifications, pull-out cabinets, compressor fridge, folding equipment holders, oxygen lines, blue light system CAN bus central electrics, external compartment lighting and interior lights are all in compliance with the standard EU ambulance configuration. * Every stretcher system can be individually adapted and installed. Excellent, immediately operational condition / vehicle is reconditioned, no dents or scratches / stretcher available for surcharge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12V 88Ah / engine pre-heating / auxiliary heater / power steering / heavy-duty stabilizer / tachograph / air conditioning / immobilizer / rear work light, external 220V connection / fire extinguisher / centre armrest / reversing camera / reading lamp / radio pre-installation / optical warning system / lightbar & front LED flashers, acoustic warning system. Financing or leasing possible!!! Our used special vehicles are inspected, reconditioned, and serviced by an experienced team of specialist vehicle technicians, ensuring a TÜV or Dekra certificate is just as much a given as the immediate operational readiness of every ambulance. Vehicle is almost as good as new!!! We offer a 12-month warranty on this ambulance!!! Sale without medical and technical equipment, but can be purchased separately. Our service – for you! * 20–40 ambulances (RTW) available immediately at our premises * DEKRA or TÜV certificate on request * FINANCIAL SERVICE – financing, leasing, or hire-purchase individually tailored to your needs Kdedpfx Aer Sxldjfvjl * WARRANTY – up to 36 months available at extra cost * Accident replacement vehicles in stock * RECONDITIONING – all vehicles are professionally prepared for you by our team * More vehicle offers and service points can be found at: We look forward to your call / The G&G team is always available for you. We speak Italian, English, Polish, and Spanish, and can certainly help you if you are looking for a good used ambulance. This advert serves as a preview of our vehicle only and does not constitute part of a purchase contract. Information given online is non-binding and does not represent warranted qualities. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to change and prior sale!

Stanje: rabljeno, prevoženi kilometri: 268.000 km, moč: 140 kW (190,35 KM), prva registracija: 01/2018, vrsta goriva: dizel, skupna masa: 4.800 kg, barva: bela, vrsta prenosa: samodejen, število sedežev: 5, skupna višina: 2.850 mm, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, RTW 519 4x4 WAS Box Body Financing or rental possible with new original Mercedes Benz ENGINE and reconditioned transmission MB Sprinter Ambulance according to DIN EN1789 / DIN EN 13500 Sandwich box body incl. additional hot water heater, etc. * Sandwich aluminium/GRP box body with extra-deep equipment access door, internal vacuum mattress compartment door * Rear portal: work lights, reversing camera * Vehicle lights and flashing beacons * Rear of vehicle fitted with sprung bumper / rear step * Ceiling centre panel, patient compartment floor, door configuration, pull-out cabinets, compressor refrigerator, flap-style equipment mounts, oxygen lines, CAN bus central electrics for blue light system, external locker lighting, and interior lighting all compliant with typical EU ambulance standards. Equipped with all-wheel drive. * Every stretcher system is flexibly installable. Very good, ready-to-use condition / Vehicle reconditioned / No dents or scratches / Stretcher available at additional cost / ABS + ASR, ESP / 2x Airbag / electric exterior mirrors / electric windows / 2x 12V 88Ah batteries / engine pre-heating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light rear, external 220V connection / fire extinguisher / centre armrest / reversing camera / reading lamp / radio pre-installation / optical warning system / roof bar & front flashers, acoustic warning system. Kdjdetn Uaispfx Afvol Financing or hire purchase possible! Our used special vehicles are inspected, reconditioned, and maintained by an experienced team of technicians from the special vehicles sector, ensuring that a TÜV or Dekra seal is just as standard as the immediate operational readiness of all ambulances. Vehicle is nearly like new! We offer a 12-month warranty on this ambulance! Sale without medical and technical equipment; can be purchased separately if required. Our service – for you! * 20–40 ambulances always immediately available on site * DEKRA or TÜV SEAL on request * FINANCIAL SERVICES – financing, leasing or hire purchase tailored to your needs * WARRANTY – up to 36 months available at extra cost * Replacement vehicles in stock * PREPARATION – All vehicles are professionally prepared by our team for you * More vehicle offers and service options can be found at: We look forward to your call – The G&G Team is always at your service. We speak Italian, English, Polish, and Spanish and can certainly help you if you're looking for a quality used ambulance. This listing serves only as a preview of our vehicle and does not constitute part of a purchase contract. Information provided on the internet is non-binding and does not represent guaranteed features. The seller is not liable for errors, input mistakes, and data transmission mistakes. Subject to change and prior sale!

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Waterjet Cutting Machine ATMS 2015-B – Installed 03.2022 – Unused For sale: ATMS WaterJet 2015-B waterjet cutting machine with a working area of 2000 × 1500 mm. The machine was purchased new and installed in March 2022. It was acquired through EU funding for laboratory purposes, but used only once during installation for testing. The actual operating time is just 5 working hours. Why? We specialize in research and prototype development. It has proven much cheaper and easier for us to cut metal parts using other equipment. Technical condition: • Excellent technical and visual condition • Complete machine • Stored in industrial conditions • Full technical documentation Basic technical data: • Working area (X × Y): 2000 × 1500 mm • Z-axis travel: 200 mm • Rated power: 37 kW, 400 V / 50 Hz • Maximum pressure: 410 MPa (60,000 psi) • Drives: servo • Control system: CNC (NC-Studio, PC with Windows) • File formats: G-code, dxf, nce, nc, cnc • Max X/Y traverse speed: 15,000 mm/min • Cutting speed: 10,000 mm/min • Automatic abrasive feeding system (200 l) • Laser positioning system • Manual head angle adjustment up to 45° • Water treatment system • Oil cooling system with fans Kodpfx Aex Rqycefvodl Price: to be agreed Location: Poland / Mazowieckie region

Stanje: rabljeno, Rabljena industrijska vrata / sekcijska vrata proizvajalca LS Loading Systems za skladišče, logistični center ali nakladalno rampo. Vrata s steklenim segmentom in preprostim mehanskim zapiranjem brez ključavnice. Na voljo več enakih vrat. Proizvajalec: LS Loading Systems Tip vrat: Industrijska vrata / sekcijska vrata Izvedba: Notranja in zunanja montaža Zaklepanje: Preprosto mehansko zaklepanje brez ključavnice Upravljanje: Ročno Kodpfxsy Tym Dj Afvodl Čista širina: 253 cm Čista višina: 274 cm Količina: Na voljo 27 kosov

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 2.000 l, uporabna prostornina rezervoarja: 2.000 l, skupna dolžina: 2.600 mm, skupna širina: 1.200 mm, skupna višina: 1.500 mm, zunanji premer: 1.100 mm, skupna masa: 580 kg, material stene: jeklo, stenska struktura: enoslojni, Število komor: 1, tlak (maks.): 16 letvica, nadtlak (max.): 23 letvica, Oprema: CE označba, 2000-litrski ležeči zračni rezervoar v skoraj novem stanju. Industrijski zračni rezervoar v odličnem stanju, popolnoma opremljen in takoj pripraven za uporabo. Glavni podatki: Prostornina: 2000 litrov Obratovalni tlak: 16 bar (preizkusni tlak: 23 bar) Leto izdelave: 2011 Teža: 580 kg Tip: zračni rezervoar Proizvajalec: Vasipari és Tartálygyártó Kft., Debrecen CE oznaka, certifikat 97/23/EC Oprema: -Manometer (JAKO, 0–16 bar) -Varnostni ventil -Avtomatski ločevalnik kondenzata (EWD 75, Made in Germany) -Zaporni ventil, polnilni ventil, priključne prirobnice -2 ovalni čistilni odprtini -Tlačno stikalo Kdodpfey S Af Hex Afvjl Stanje: Tovarniško modro pobarvan. Vsa oprema popolnoma funkcionalna. Enota je prestala tlačni preizkus in je varna za uporabo. Osebni ogled in prevzem možen. Dostava po dogovoru. Cena: neto 2700 €

Stanje: rabljeno, Leto izdelave: 2019, Avtomatski separator za odstranjevanje bakterij iz mleka in sirotke (baktofuga). Ti postopki so nujni za odpravo bakterijskih nečistoč, ki lahko predstavljajo zdravstveno tveganje ter skrajšujejo rok uporabe. Znamka: POLAT (Makina San) Model: PMS BX5 Kjdpfxeyc E E Aj Afvsdl Hitrost centrifuge: 6.200 vrt/min Leto proizvodnje: 2019 Napajanje: 400 V Vgrajena moč: 22 kW Teža: 1220 kg Stanje: rabljeno Električna dokumentacija.

Stanje: rabljeno, S tem oglasom kupite rabljeno napravo DTG PreTreater "Schulze PRETREATmaker 5". Stanje: Gre za rabljeno napravo, ki lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je bila preizkušena in deluje. Pakiranje in dostava: Napravite si lahko ogledate v našem delovnem času. Prosimo, da za to dogovorite termin! Pomorsko varno pakiranje in svetovna dostava sta možna na zahtevo! Kdodpfx Afsy R Nrkevjl Pred odpremo ali prevzemom vam funkcionalnost naprave posnamemo na video. Za več informacij nas lahko kontaktirate osebno.

Stanje: rabljeno, We are offering used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue The uprights are pre-assembled (bolted lattice design) Beam length: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Compartment load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) BULK PRICING Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Kdsdoy Dgdqopfx Afvjl Payment terms will be agreed upon in case of order. The stated price is a unit/net price as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and craft sectors. We continuously offer attractive used equipment from various manufacturers/brands at favourable terms. If you have any questions, please feel free to contact us.

Stanje: rabljeno, We offer used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue The uprights are pre-assembled (bolted truss design) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Load capacity per shelf: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) VOLUME DISCOUNTS Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be coordinated in case of order. Prices are per unit/net prices, or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US Ksdpfx Afsy Dgdwsvedl DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Should you have any questions, please feel free to contact us.

Stanje: rabljeno, We are offering used pallet racking systems here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue The uprights are pre-assembled (bolted truss construction) Beam width: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Bay load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Add-on bay: €382.55 net (1 frame + 10 beams) VOLUME PRICING Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Add-on bay 1 - 5 units: €382.55 net Add-on bay 6 - 20 units: €367.25 net Add-on bay 21 - 50 units: €351.95 net Add-on bay from 51 units: €336.64 net PROJECT DESIGN Our sales team will be happy to provide you with a non-binding, customised offer tailored to your requirements. TRANSPORT & INSTALLATION We will gladly assist you with transport and assembly of the goods. TERMS OF PAYMENT Ksdpfey Dgcyox Afvjdl Payment terms will be agreed upon in the event of an order. All prices quoted are per unit/net prices, unless otherwise stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specialises in new and used products for warehousing logistics, conveyor technology, mezzanine floors, textile storage as well as commercial, industrial, and craft machinery. We continually offer attractive used equipment from a variety of manufacturers/brands at competitive rates. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Prodamo profesionalni vijačni kompresor z direktnim pogonom. Ta model se najpogosteje uporablja na naslednjih področjih: Kjdpfxeyudvde Afvsdl Industrijska in obrtna proizvodnja: Idealen za (CNC) obdelovalne centre v strojništvu in lesni industriji. Avtoservisi in lakirnice: Primeren za večje obrate, ki zahtevajo stabilno dobavo zraka za pnevmatsko orodje in lakiranje. Peskanje in ščetkanje: Zaradi zmogljivosti do 900 l/min je primeren za skoraj neprekinjeno delo v delavnicah. Pakirne linije in vodarne: Uporablja se kot stabilen vir stisnjenega zraka za avtomatizirane procese. Pnevmatsko orodje: Uporablja se za pogon širokega nabora profesionalnega orodja v manjših in srednje velikih obratih.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, Funkcionalnost: nefunkcionalno, Avtomatski stroj za ovijanje tovora na paletah v raztegljivo folijo. Stroj zahteva popravilo! Kedpfx Asxfbfvsfvjdl Manjka ena glava za raztegljivo folijo, komunikacija ASI je nedelujoča, omara za upravljanje ni popolna. Na voljo originalna dokumentacija stroja in električne sheme. Proizvajalec: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Letnik izdelave: 2005 .

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Kjdohtq Rispfx Afvsdl Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, We are a renowned European manufacturer of Long Reach booms. Our booms are specifically tailored for your machine (we individually match them to your specific machine) and are supplied complete with hydraulic lines (hoses), bolts, steel and bronze bushings, as well as a bucket closing cylinder. The stick (dipper) cylinder is not included in the offer. However, most customers use the original cylinder from the standard arm. Upon request, we can supply a used, refurbished stick cylinder. If you require a different length or an extension for another machine, please send us a specific request! We offer booms for machines from 14 to 80 tons – suitable for Volvo, CAT, Doosan, Atlas, Kobelco, Hitachi, and others. Upon request, we can organize transportation for you, complete with all shipping documents and necessary customs paperwork. Long Reach booms are made from S355J2 steel and are available in designs with two stick cylinders (triangle type), which allows fully straightening the boom without reducing reach, as well as in a single stick cylinder version (banana type), suitable for building arms intended for heavier duty work. All machined parts of our products (pins, bushings) are heat-treated (hardened and carburized). Each boom set includes: - Booms (arms) Kodpfx Afsyf Apkovsdl - Bucket closing cylinder - In the triangle version: stick cylinders - Pipes and hydraulic hoses - Central lubrication for hard-to-reach points - Optionally, for an additional charge: digging or grading bucket (with capacity matched to the machine). The arms are painted with paints matched to your machine and come with warning and information decals. The listed price applies to a 14m boom, suitable for machines from 18 to 29 tons.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period Kjdpfshtq Nzox Afvedl - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Leto izdelave: 2023, stanje: novo, Welding Positioner Three-phase powered positioner Table and arm rotation by hydraulic turntables Function control located on the positioner housing Ideal for positioning components during: - Welding - Cleaning - Assembly Increase work efficiency by up to 40% Advantages and Benefits: For the employer: - Increase work efficiency by up to 40% through optimal positioning of workpieces – resulting in a short payback period for the device - Enhanced production output without requiring additional floor space - Improved weld seam quality – always possible to weld in the most convenient position - Robust construction ensures long-lasting, trouble-free operation Kjdpfx Ashtq R Ajfvsdl For the operator: - Provides ergonomic working posture - Minimizes accident risks – no need to change the workpiece clamping - No downtime due to waiting for overhead cranes - Easy installation and operation Possibility for full welding automation with Kawasaki welding robots. We also offer positioners complete with robot and integrated control system. ADDITIONAL OPTIONS: WIRED REMOTE CONTROL FOR POSITIONER OPERATION WIRED FOOT PEDAL FOR TABLE ROTATION VARIABLE SPEED CONTROL FOR TABLE AND ARM ROTATION CONSTANT TABLE ROTATION FUNCTION TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer requirements.

Leto izdelave: 2023, stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL Ksdpfjgmiduex Afvedl - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Leto izdelave: 2023, stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Kdedpfohtq Rbsx Afvjl Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Popolna indukcijska kalilnica – Kaljenje gredi, zatičev in puš Prodajam popolnoma kompletno indukcijsko kalilnico, idealno za kaljenje gredi, zatičev in puš. Stroj je opremljen s hladilnim blokom – takoj pripravljen za delo! Tehnične specifikacije: - Moč generatorja: 160 kW - Delovna frekvenca: 10-25 kHz - Napajanje: 3x400V / 50Hz - Največji premer kaljenega obdelovanca: do fi150 (možnost nadgradnje na fi250 z zamenjavo hladilnega obroča) - Globina kaljenja: do 6 mm - Največja dolžina kaljenega obdelovanca: 1250 mm Ksdpfx Afeyf Ak Iovedl - Hlajenje: Hladilni blok s pretokom 100 l/min - Upravljanje: Digitalno in ročno z možnostjo programiranja parametrov - Dosegljiva trdota glede na vrsto jekla: - C45 (konstrukcijsko jeklo): ~50-55 HRC - 42CrMo4 (legirano jeklo): ~55-60 HRC - Orodna jekla: ~60-64 HRC Stroj je v odličnem stanju, pripravljen na delovanje! Možnost ogleda in preizkusa na lokaciji.

Leto izdelave: 2023, stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: Kdedpoiuna Eofx Afvsl - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, Leto izdelave: 2025, Horizontal Cartoner 60-ECO – Compact, Powerful, and Flexible Kdedpomftm Nefx Afvsl Lack of space is a common issue in the food industry – our BASIS 50-ECO horizontal cartoner offers a compact and high-performance solution! This machine has been specifically developed to efficiently process a wide range of folding carton sizes in the smallest possible footprint. With a base length of just 2,284 mm (extendable depending on desired conveyor length), it achieves an output of up to 60 folding cartons per minute. Technical Highlights: Adjustable Product Infeed: The infeed conveyor can be customized upon request. Automatic Product Indexing: We can design and fully integrate an automatic product indexing system. Packaging Range: Handles folding cartons up to 220 mm length (A), 120 mm width (B), and 400 mm height (H). Proven Technology for Maximum Reliability: Control: Siemens PLC system Drive: Siemens servo drives for precise motion sequences Adhesive Technology: Nordson hot melt system for clean and secure sealing In addition, we offer a comprehensive portfolio of vertical and horizontal cartoning machines as well as flow wrapping machines. All machines are manufactured in Germany or by our European partners. You are welcome to visit our factory, view the equipment, and test with your own products.