Weiz Industrie- & Robotertechnik Gmbh Rspa-20.2.2-Ds nakup rabljenega (85.969)

Stanje: novo, Leto izdelave: 2025, Features: - Overband neodymium magnetic separator - HP - Dust suppression - Belt speed control Iodpow Elbdsfx Ab Aotg - Self-propelled drive for semi-trailer

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Ijdpoyz Sn Njfx Ab Aetg

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves Iodpfx Ajw Ivk Teb Ajtg - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, Rezilo/drobilec ostružkov z enim gredom Rešetka z luknjami za določitev dolžine ostružkov Kompaktna in ojačana izvedba za vse vrste ostružkov, tudi s grobimi delci v materialu. Glavne mere: dolžina 3200 mm x širina 2800 mm x višina 3035 mm Dovajalni lijak: 1500 mm x 1500 mm Dovajalna odprtina: 700 mm x 7400 mm Pogonska moč cca 37 kW Teža: 6000 kg Premer drobilnega rotorja: 290 mm Zmogljivost na uro cca 1,5 - 2,5 t/h glede na material Itodjxy Idhopfx Ab Ajg Krmiljenje S7 300, vključno z vsemi komponentami in ožičenjem Lokacija: Avstrija Na voljo takoj

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives. Ijdodrtanopfx Ab Aetg

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Ijdjwc Rcnopfx Ab Aetg Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: novo, Leto izdelave: 2025, pritisk: 12 letvica, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed materials during operation. This eliminates not only the need for extensive cleaning, but also protects the operator and those nearby from the harmful effects of airborne particles. With a dust-free sandblasting machine, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate for sandblasting beginners. Itedpfx Asupzn Esb Aog ✅ PR 50 Dust-free sandblasting machine With its versatile range of applications, the PR 50 can process a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and convenient design, it is easy to operate and transport—even for those new to sandblasting.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 2.438 mm, skupna višina: 2.896 mm, skupna dolžina: 6.058 mm, skupna masa: 3.300 kg, teža obdelovanca (maks.): 5.000 kg, filtrirna površina: 40 m², kapaciteta rezervoarja: 200 l, Oprema: osvetlitev, Ponujamo vam inovativno rešitev! Visokokakovosten High Cube kontejner za notranjo in zunanjo uporabo. Ta kontejner je izdelan iz vzdržljivega Corten jekla, kar zagotavlja vsaj 30-letno življenjsko dobo. Popolnoma je zatesnjen, odporen proti vetru in vodoodporen. Kaj je vključeno? ✔ Tlačna peskalna naprava Premium 200 z ročnim recikliranjem abraziva, primerna za vse običajne večkratno uporabne abrazive. ✔ Integriran filtracijski sistem v kontejnerju (vključno s predločevalnikom udarcev, povezovalnimi elementi itd.). ✔ Prednameščena električna napeljava in LED osvetlitev za takojšnjo uporabo. Robusten, varen in pripravljen za vsestransko uporabo! Ta enota je takoj operativna in zasnovana za različne industrijske aplikacije. Itedpsuiwu Hofx Ab Aeg Možen prevoz Prevoz je na voljo po dogovoru, cene so določene glede na dnevne tarife. Če vas zanima ali imate vprašanja, me prosimo kontaktirajte! Za več podrobnosti ali ponudbo me lahko kontaktirate neposredno – z veseljem vam bom pomagal! Za povpraševanja ali ponudbe se obrnite na g. Andreasa Wallnerja kadarkoli.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SAPI Jumbo, pritisk: 12 letvica, skupna širina: 3.087 mm, skupna višina: 2.078 mm, skupna dolžina: 3.692 mm, skupna masa: 3.000 kg, notranja širina: 2.340 mm, notranja dolžina: 3.520 mm, notranja višina: 2.500 mm, teža obdelovanca (maks.): 500 kg, filtrirna površina: 20 m², Oprema: osvetlitev, Učinkovita in pripravljena JUMBO peskalna kabina Ijdsukdfpspfx Ab Ajtg Ta JUMBO peskalna kabina, popolnoma sestavljena in prehoden model, ponuja celovito rešitev za učinkovito peskanje. Opremljena z dvema LED svetilkama, zagotavlja optimalno osvetlitev delovnega območja. Dvokrilna vrata omogočajo enostaven dostop in rokovanje z večjimi obdelovanci, medtem ko zaščitna gumijasta obloga v notranjosti preprečuje obrabo in podaljšuje življenjsko dobo kabine. Za filtracijo zraka in zmanjšanje prahu je kabina opremljena z visokozmogljivim kartušnim filtrom in udarno ločevalno enoto, kar zagotavlja čisto delovno okolje. Ploski transportni sistem v tleh, pokrit z rešetko, omogoča samodejno vračanje abraziva, medtem ko električni pogonski sistem zagotavlja nemoteno delovanje. Poleg tega je kabina opremljena z dvigalom z vedri in visokozmogljivim sistemom za reciklažo abraziva, ki omogoča učinkovito obdelavo in ponovno uporabo peskalnega materiala. 38-litrski tlačni peskalni kotel zagotavlja zadostno kapaciteto za daljše delovne cikle. V kompletu so tudi 10-metrska peskalna cev in trpežna šoba iz borovega karbida, ki zagotavlja optimalne rezultate peskanja. Idealna rešitev za profesionalno peskanje Ta peskalna kabina je popolna rešitev za podjetja, ki potrebujejo zanesljiv in učinkovit sistem za peskalne operacije. ✔ Možne dodatne opcije, kot so nakladalni vozički, na zahtevo. ✔ Dovod stisnjenega zraka, električne energije in montaža morajo biti zagotovljeni na lokaciji. Če ste zainteresirani ali imate vprašanja, nas kontaktirajte kadarkoli!

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Itodoun Sd Uopfx Ab Ajg Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: novo, Leto izdelave: 2025, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that collects all dust and removed material during operation. This not only eliminates the need for extensive cleaning, but also protects operators and people in the vicinity from the harmful effects of airborne particles. With a dust-free sandblasting unit, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 litre versions The SAPI pressure/vacuum sandblasting machine "DINO" is a compact and universally applicable unit. It is characterised by its robust construction and mobility. Itjdpjwc Rg Hjfx Ab Aog The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. Cleaning capacity: 3–10 m² per hour. All in all, this device offers the operator a clean working environment, low abrasive consumption (thanks to the vacuum system), and reduced disposal costs. The unit is used in the steel, shipbuilding, and petrochemical industries, as well as for maintenance work in construction, by stonemasons, and more.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, 1 x fiksna tračna žaga iz nerjavečega jekla Reich GmbH za rezanje, običajno uporabljena za rezanje mesa. Dobavljena z več rezervnimi deli in novimi rezili. Itsdpoyzxd Rjfx Ab Asg Model - Profi 400. Serijska številka - 400 1141. Leto izdelave - 2005. Velikost rezila - 3204 mm x 16 mm. Električne zahteve - 400 V / 50 Hz / 3 faze.

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts. Iedefnh Rvopfx Ab Astg

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Iodpfx Aboga Ehbe Astg

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 15.15.20.RB75, available with or without roller conveyor. Blasting chamber dimensions: W=1150, D=1150, H=930 mm. Includes one TÜV-certified 20L pressure vessel with conical outlet hopper. One abrasive dosing valve with pneumatically controlled abrasive quantity regulation. Integrated sealing cone with guide tube. One compressed air connection with pneumatic shut-off valve and branch for control air. One pressure regulator for adjusting the blasting pressure. One blasting hose DN19. One handpiece with boron carbide venturi blasting nozzle, 8mm. One pair of blasting gloves. Dust extraction filter unit, capacity 2000 m³/h, 2.2 kW. Itodpega I R Eefx Ab Asg

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. Itodpfx Abedhl Nge Asg If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 3,73 kW (5,07 KM), največja višina reza: 440 mm, največja širina rezanja: 600 mm, vrtilni razpon: 60 °, skupna višina: 1.700 mm, skupna dolžina: 2.900 mm, skupna širina: 1.300 mm, skupna masa: 1.320 kg, Oprema: CE označba, Ponujamo to rabljeno polavtomatsko tračno žago TOP-PORĘBA BMT460DSA, letnik 2011. Moč motorja: 5 KM Premer reza 90° (okrogli profil): 460 mm Mere reza 90° (kvadrat): 460 x 460 mm Mere reza 90° (pravokotnik): 440 x 600 mm Premer reza 45° (okrogli profil): 445 mm Mere reza 45° (kvadrat): 445 x 445 mm Premer reza 60° (okrogli profil): 295 mm Mere reza 60° (kvadrat): 295 x 295 mm Dimenzije rezilnega traku: 41 x 1,3 x 5330 mm Teža stroja: 1320 kg Za dodatna vprašanja ali informacije nam prosim pošljite sporočilo ali nas kontaktirajte po elektronski pošti. Itodpfxeyv Ai Hj Ab Aeg

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Ijdpfx Aottc Upsb Aetg Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Itsdpfx Asttc Utjb Asg Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.082 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, Important information: Auction extended by 14 days. The control system has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly serviced! TECHNICAL DETAILS Itodsy Dgyfopfx Ab Asg Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feed rate Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Total installed power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT Highly rigid gantry design Precision linear guides and ball screw drives Spacious working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina papirja (min.): 2.100 mm, največja višina papirja: 120 mm, skupna dolžina: 3.300 mm, skupna širina: 3.500 mm, skupna višina: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Item: Isdjy Szwuepfx Ab Astg For liquid sealing of digitally printed media. Suitable for the application of primers or protective coatings, as well as for full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct curing with overhead UV radiation. Condition: As new (purchased in 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was sourced in 2023 through Welte and has only been operated for a few hours since then. It is in excellent optical and technical condition (demonstration state) and offers a premium solution for UV finishing of large-format prints. The machine also includes a cleaning/washing unit with extraction as well as a second roller (smoothing roller). Technical Data & Highlights - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Conveying speed: Infinitely adjustable (up to 25 m/min) - Drying: Includes powerful UV drying unit (TRUV) for immediate downstream processing - Controls: Modern operator panel for precise process control Asking Price €150,000 (negotiable) plus VAT | ex works Contact & Inspection The system is still assembled and can be inspected and tested under power by prior appointment. (Location: St. Martin bei Lofer, Austria)

Stanje: dober (rabljeno), Leto izdelave: 2003, Filtration is performed by an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - Operating pressure: 10 bar - Filtered particle size: 6.0 µm (microns) - Dimensions: 1050 x 1150 x 1620 mm Iedpsiw Eafefx Ab Ajtg - Capacity: 425 l - Electrical specifications: 250 V, 5 A, 50/60 Hz - Year of manufacture: 2003

Stanje: dober (rabljeno), Manufacturer: Bühner Schaible Elektronik GmbH Ijdsh Dimnepfx Ab Aetg Type: TH 15 / S2 Electrical data: 230 V / 50–60 Hz / 6 A Diameter: 900 mm

Stanje: dober (rabljeno), Proizvajalec: Rhein-Nadel Automatisation GmbH Tip: SRC-N 630-1 R Frekvenca vibracij: 50 Hz / 3000 min⁻¹ Električna moč: 220 V Itsdpfx Asgth U Isb Ajg Premer bobna: 900 mm Nastavljive vibracije

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travels: X-axis 600 mm Y-axis (swivel position) 600 (975) mm Z-axis 500 mm Control System: Siemens 840D control, side-mounted Feedrate/Rapid traverse: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Mean acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40%ED) Power: 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal side-by-side arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Itsdoy Swq Rspfx Ab Aeg Work Area: Swing carrier with ground gear, max. payload 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. payload 700 kg, speed 25 rpm Partition between machining and loading area Tool Magazine: 2 x 50 tools HSK-A 100 chain magazine Tool change time (chip-to-chip): 4.48 sec. Max. tool diameter: 100 mm 250 mm with free adjacent slot Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Centralized lubrication Minimal quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact belt filter Hydraulic unit Maintenance unit Water chiller Fully enclosed, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other: Very good condition Main-time parallel setup Available from December 2023/January 2024