Univerzalni Stroj Za Upogibanje nakup rabljenega (95.862)

Stanje: zelo dobro (rabljeno), Tehnični podatki: 2 valja, hidravlično nastavljiva 2 podpiralna valja 3 pogonjena valja NC-nadzor Premer gredi: 80 mm Dolžina gredi: 160 mm Premer valja: 224 mm Moč motorja: 5,5 kW Mobilna upravljalna konzola Lsdpfxezv Erne Ac Usaf Dimenzije (dolžina x širina x višina): približno 1240 x 1460 x 960 mm Teža: približno 1,4 tone Stanje: zelo dobro stanje, malo uporabljena Prodajalec ne odgovarja za tipkarske ali napake pri prenosu podatkov. Stroj je glede videza, tehnike in obrabe primeren starosti; rabljeni stroji se prodajajo brez kakršnih koli garancij.

Stanje: rabljeno, Leto izdelave: 2009, Sheet width 3100 mm Sheet thickness / mm Laodpfjwbi Itox Ac Uef Frame opening / mm Swivel bending 3100SK folding machine sheet metal bending machine press brake

Stanje: novo, Wellendurchmesser 40 mm Durchmesser der unteren Welle 138 mm Oberer Wellendurchmesser 138 mm Motorleistung 1,1 / 380 kW / V Arbeitsgeschwindigkeit 6 m/min Maschinengewicht ca. 230 kg Raumbedarf ca. 750 x 600 x 1400 mm Die Gerd Wolff PK 40 ist eine Rohrbiegemaschine welche für unsere Vertriebsmarke "GERD WOLLF Maschinenfabrik", von einem renommierten Hersteller aus der Türkei gefertigt wird. Standardzubehör und technische Daten - Blechrahmen - 2 Unterwalzen werden angetrieben - Direkte Antriebsleistung - Obere Walze ist im Leerlauf (freie Rotation) - Gehärtete Rollen - Gehärtete Wellen aus Spezialstahlwerkstoff - Standardrollen - Verstellbare Führungsrollen - Horizontale und vertikale Arbeitsposition Optionale Ausstattungen - Rohrbiegerollen - Profilbiegerollen - Winkelbiegerollen - Digitales Auslesen - Optionale seitliche Winkelführungen Lodoyn R Ugjpfx Ac Ueaf Die PK 40 wird für unsere Vertriebsmarke "GERD WOLLF Maschinenfabrik", von einem renommierten Hersteller aus der Türkei gefertigt.

Stanje: novo, Angle iron/leg length / mm Double-T beam over x-axis / mm U-section over x-axis / mm Total power requirement: 4/380 kW Machine weight: approx. 1645 kg Space required: approx. 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rolls. The machine is ideally suited for bending profiles, tubes, and similar materials. Model: HPK 80 Upper shaft diameter: Ø 80 mm Lower shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard equipment Welded steel construction 3 driven rolls Hardened and ground shafts made from high-strength special steel Rolls hardened and ground Horizontal and vertical working positions Hardened standard rolls Mobile control panel Laedpfx Aceyk Im Es Ujf Mechanical lateral guide rolls with 3 axes Brake motor for precise bending 2 digital displays Optional equipment Pipe, profile, and square bending rolls Hydraulic lateral guide rolls (2 axes) Automation with NC control

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: ESA, model krmilnika: Touch Panel, Premer cevi (maks.): 30 mm, Dolžina cevi (maks.): 4.000 mm, Debelina stene cevi (maks.): 4 mm, skupna masa: 3.700 kg, skupna dolžina: 6.000 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, Maks. premer cevi: 30 mm Min. premer cevi: 4 mm Maks. debelina stene: 4 mm Maks. polmer upogiba: 180 mm Min. polmer upogiba: 10 mm Maks. dolžina upogiba: 4000 mm 3D upogib: Da, mm/min. Število orodij: 10, 12, 15, 16, 18, 20, 22, 28 Lasdpfxezvfq Do Ac Uof Dolžina: 6000 mm Širina: 1800 mm Višina: 1800 mm Teža: 3700 kg

Stanje: novo, Leto izdelave: 2026, Ring Bending Machine Zopf - Model ZB 110/3 H Laododkxibjpfx Ac Ujf - three driven rollers with smooth surface - hydraulic adjustment of the upper roller - horizontal and vertical working positions - digital display with memory function - shafts supported with tapered roller bearings - use of interchangeable sliding rails on the guide carriage - roller diameter 260 mm - shaft diameter 80 mm - shaft rotation speed 7 rpm - drive motor 2.2 kW - hydraulic cylinder pressing force 270 kN - bending capacity up to 100x15 mm on edge - round tube up to 120x2 mm - angle iron 80x80x10 mm - weight 1400 kg

Stanje: novo, Leto izdelave: 2026, Pipe bending machine ZOPF - Model R 1 - without tooling - incl. foot pedal with emergency stop control - without tools - programmable control unit - 100 programs, each with 9 bends - C-axis display and control - manual and automatic bending modes possible - bending angle and springback are programmable - quick tool change via plug-in system Laedpfsfiqntox Ac Uef - scale for counterholder integrated into the table - mobile with pallet truck - dimensions 930x410x1000 mm - weight 230 kg - motor 1.5 kW - 220 Volt AC - bending radius from R55 - R340 mm - bending capacity for tubes Ø 5 mm to 50 mm - max. bending angle 210°

Stanje: dober (rabljeno), Leto izdelave: 1995, Premer cevi (maks.): 28 mm, Premer cevi: 4–28 mm Skupna potrebna moč: 1,5 kW - Pogon: hidravlični valj in veriga Lsdpfx Aceztqbps Uoaf - Območje cevi: 4–28 mm - Kot upogiba: 190° (brez cevi) - Polmer upogiba: 1,5 x D – 2,0 x D - Nazivni tlak: 250 bar - Delovni tlak: 3005 mm n.n. - Pretok: 4,5 l/min

Stanje: novo, Leto izdelave: 2026, Tlak: 28 t Pogon: 180 mm Velikost mize: 300 x 550 mm Premer bata: 130 mm Delovna hitrost, min.: 2 m/s Delovna hitrost, maks.: 9,8 m/s Hitrost povratnega hoda: 20 mm/s Najvišji tlak: 200 bar Teža stroja: pribl. 0,65 t Lasdpjgvkmrsfx Ac Uef Skupna poraba moči: 4 kW Potreben prostor: pribl. 1,15 x 0,75 x 1,1 m • Horizontalna upogljalno-ravnalna stiskalnica proizvajalca Profi Press je univerzalna hidravlična stiskalnica, ki je posebej zasnovana za izvajanje upogljalnih, profilnih in ravnalnih del. Uporaba stroja je raznolika in je odvisna od dodatne opreme, ki je nameščena na delovni mizi, nosilcu orodja ter v luknjah in izvrtinah. • Model HB-28 je opremljen z merilno lestvico za lažje upogljanje na delovni mizi, stiskalnica pa se lahko dobavi tudi z orodji (na primer matričnimi udarci), ki se lahko namestijo na nosilec orodja, ter z orodji, ki se lahko namestijo v luknje in izvrtine za izvajanje različnih del. • Hidravlični sistem se lahko regulira s pomočjo ventilov za nastavitev tlaka in pretoka, ki vplivajo na silo stiskanja in hitrost stiskalnice. Stiskalnica je opremljena z vgrajenim manometrom. • Nadzorna plošča služi za upravljanje in prikaz hoda bata ter za izbiro med ročnim in avtomatskim upravljanjem, model HB-28 pa je opremljen tudi z vgrajenim pomnilnikom za do 4 različne programe. • Upravljanje poteka preko električnih pedal.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Lajdpfewid Spox Ac Ujf - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: rabljeno, Leto izdelave: 1997, Širina pločevine: 2540 mm Debelina pločevine: 3 mm Razdalja med stebri: 2600 mm Najmanjša dolžina reza: 5 x s mm Nastavljivost spodnje kleme: 80 mm Nastavljivost zgornje kleme: 80 mm Odpiralna širina: 350 mm Skupna potrebna moč: 4 kW Dimenzije (d x š x v): 4 x 1 x 1,5 m Lajdpfjx Harmex Ac Uof Z dodatno opremo in PLC krmiljenjem Alba.

Stanje: rabljeno, Leto izdelave: 1983, Širina pločevine 2540 mm Debelina pločevine 2 mm Razdalja med stojali 2600 mm Najmanjša dolžina reza 5 x s mm Nastavljivost spodnje čeljusti 80 mm Nastavljivost zgornje čeljusti 80 mm Odpiralna širina 350 mm Skupna potrebna moč 4 kW Mere D x Š x V 4 x 1 x 1,5 m Laedpfx Acow H Dkaj Ujf Z dodatki.

Stanje: novo, Leto izdelave: 2026, Ring bending machine Manufacturer: Zopf - Model ZB 70/2 H - Two driven rollers with knurled surface - Hydraulic adjustment of the top roller - Can be operated in horizontal and vertical positions - Digital display with memory function - Shafts mounted in tapered roller bearings - Use of interchangeable slide guides on the guide carriage - Roller diameter: 152/162 mm - Shaft diameter: 40 mm Lsdpfsdktnksx Ac Uoaf - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Hydraulic cylinder pressing force: 80 kN - Bending capacity up to 60x10 mm (upright) - Round tube up to 70x2 mm - Angle iron: 50x50x6 mm - Solid material: 35 mm - Weight: 470 kg

Stanje: novo, Leto izdelave: 2026, Rebar Bender P38 Evo mobile with rollers 400V-50Hz 3-phase AC Motor 2.8 kW, with foot pedal CE declaration with preset bending angle via plug-in pins 9 RPM Ljdpfx Acehiyado Uoaf Foot switch Dimensions: 86 x 90 x 85 cm Weight: 320 kg Bending capacity at R=65 kg/mm²: Round steel 34 mm at R=86 kg/mm²: Round steel 32 mm Includes 6 bushings (50, 60, 70, 80, 95, 120 mm) Includes 1 square pin

Stanje: novo, Leto izdelave: 2026, Profilna upogljalna naprava Zopf - Model ZB 60/3 MD - Letnik izdelave 2026 - Pogon z motorjem - Pogon s tremi valji - Z digitalnim prikazovalnikom - Premer valja 30 mm - S standardnimi valji - Upogljalna zmogljivost do okroglih cevi 48 x 3,2 mm - Polni material do 30 mm - Teža približno 190 kg - Motor 0,75 kW, 400 V, 50 Hz, 3-fazni - S podstavkom, horizontalnim in vertikalnim, mobilnim - Novo Laodegh T Hkjpfx Ac Usf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Hydraulically operated three-roll plate bending machine Manufacturer: FACCIN, Model: 3HEP 2021 Technical Specifications: Number of rolls: Three Geometry of side rolls: Linear guides Working width: 2,000 mm Top roll diameter: 215 mm Side roll diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 13 mm Lasdpfxjcuxp Te Ac Usf Pre-bending capacity (full working width): 9 mm from tube diameter: 1,075 mm Rolling capacity (full working width): 9 mm Pre-bending capacity (full working width): 7 mm from tube diameter: 280 mm Standard Features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation movement Extra heavy-duty, double-pinned swing arm bearing Hardened rolls for high wear resistance Hydraulic parallelism system for side rolls Digital readout for side roll positions Cone bending device Control via swiveling operator panel Safety pull-cord with emergency stop and CE certification Mobile control console

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Hydraulic Two-Roller Plate Bending Machine Guaranteed Performance: Sheet thickness for bending (material 260 N/mm² yield strength): 2 mm Sheet thickness for bending (AISI 304-316 stainless steel): 1.5 mm Cycle time per part: 15 seconds Technical Data: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min Laodpfxsc S N Ris Ac Ujf Available immediately ex works!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Mechanical Asymmetric Three-Roll Plate Bending Machine with Pre-bending Manufacturer: FACCIN, Model: ASI 2015 Guaranteed Performance: Plate thickness for rolling at 750 mm diameter: 5 mm Plate thickness for pre-bending at 750 mm diameter: 4 mm Plate thickness for rolling at 195 mm diameter: 4 mm Plate thickness for pre-bending at 195 mm diameter: 3 mm Performance data based on steel with a yield strength of 240 N/mm² and a tensile strength of 370 N/mm² Technical Data: Working length: 2,000 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 150 mm Installed power: 4.3 kW Rolling speed: 4 m/min Lodpfocuxpqex Ac Usaf Length: 3,300 mm Width: 750 mm Height: 1,200 mm Weight: 2,136 kg Standard Equipment: All rolls are forged and induction-hardened Both central rolls are driven Safety control ensuring immediate stop of all machine movements Machine frame stands on a welded base frame. Optimal stability and reliability of the machine are thus ensured. Optimal force transmission into the machine frame via long guides during straight adjustment movement of the bending rolls. (No arc-shaped adjustment movement, therefore no torsional forces in the frame) Digital display for positioning of the adjustable roll Motorized adjustment of the adjustable roll Cone bending device with hardened stop block Emergency stop pull cord running around the machine Machine with CE certification and German documentation

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Three-roll plate bending machine with variable axes Manufacturer: FACCIN, Model HAV/S 3145 Technical specifications: Number of rolls: Three Side roll geometry: variable Working width: 3000 mm Top roll diameter: 450 mm Variable three-roll plate bending machine Ledpfoc S N Nqox Ac Ueaf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Technical Specifications: Section modulus: 100 cm³ Main shaft diameter: 130 mm Side shaft diameter: 130 mm Outer diameter of bending rolls: 410 mm Adjustable roll speed: 0–6 m/min Installed power: 18.4 kW (25 HP) Length: 1,900 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,720 kg Lsdpfx Asd Eqg Nec Uoaf Standard Equipment: - Hydraulic adjustment of side rolls - 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) - Independent side profile guide rolls, adjustable in 6 directions, fully hydraulic - Automatic circumference/rotation speed compensation - Complete universal roll set for standard profiles and beams (12-piece) - Tool kit for machine equipment - Low voltage control on mobile operator panel - Safety device in accordance with regulations - Technical documents and CE certificates - Digital displays for the side roll positions Installed Options: Siemens NC control system PGS-CLASSIC

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Usable length: mm 3050 Number of rollers: four Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Installed power: 30 HP Lsdpfx Acsf T Rzfj Ueaf Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP S54 Four-Roller Plate Bending Machine Electronically controlled, electric drive, four-roller plate bending machine Technical Specifications: Lodpfx Aoiivgroc Ueaf Number of rollers: Four Side roller geometry: Lever-arm guided Working width: 3,000 mm Top roller diameter: 300 mm Bottom roller diameter: 280 mm Side roller diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500 mm Width: 1,400 mm Height: 1,600 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 18 mm Pre-bending capacity (full working width): 12 mm From pipe diameter: 1,500 mm Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 10 mm From pipe diameter: 450 mm Standard Equipment: Electric drive for the top roller Lever-arm adjustment of the side rollers Extra heavy-duty, double-pinned drop-end bearing Electronic Parallelism System (EPS) Hardened rollers for high wear resistance Cone bending device Mobile control panel 3 digital readouts for side and lower roller positions Safety cable with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Laodpfx Ast Akt Rjc Uof Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer valja: 200 mm, dolžina valja: 2.000 mm, delovna širina: 2.000 mm, najv. debelina jeklene pločevine: 8 mm, vrsta vhodnega toka: trifazni, delovna dolžina: 2.000 mm, Hydraulically Operated Four-Roller Plate Bending Machine Manufacturer: BIKO, Model B4 2020 Technical Data: Number of rollers: Four Side roller geometry: Linear guides Working width: 2,000 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Side roller diameter: 160 mm Rated installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Bending Performance: For material with yield strength of 260 N/mm² Lsdpfx Ajd Iclrec Uoaf Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,000 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 4 mm From tube diameter: 265 mm Standard Features: Linear guide system for roller movement Extra wide bearing blocks Needle bearings for roller rotation Extra heavy-duty, double-supported drop end bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side roller and lower roller positioning Cone bending device Control via swivel-mounted operator panel Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers Laedogd T R Dopfx Ac Uef • Siemens NC control • Cone bending device with electronic tilting adjustment