Trumpf Trumatic 4030 nakup rabljenega (532)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, prebijalna sila: 22 t, skupna višina: 2.300 mm, najv. debelina pločevine: 6 mm, skupna masa: 13.800 kg, širina mize: 3.000 mm, dolžina mize: 1.500 mm, obremenitev mize: 100 kg, proizvajalec krmilnikov: TRUMPF, največja dolžina izdelka: 6.900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It offers a maximum punching force of 220 kN and can process sheet thicknesses up to 6 mm. The machine can handle workpieces weighing up to 150 kg and features a working area of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for further information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working area: 3000 mm without repositioning • Y-axis working area: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min Fodpfx Apox Uqzzorspk • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Electrical connected load: approx. 19 kVA • Required compressed air pressure: 6 bar The machine is in ready-to-operate condition. It comes with a comprehensive set of punches, dies, and tool holders. Dimensions Machine depth 6000 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, AVAILABLE FROM October 2026 Punching force 220 kN Laser power in Watts 4000 Travel path - x 2500 mm Travel path - y 1250 mm Cutting capacity for mild steel 8 mm Cutting capacity for stainless steel 8 mm Cutting capacity for aluminium 6 mm Workpiece weight 280 kg Machine weight approx. 24,000 kg Dimensions 10130 x 8898 x 2328 mm Fedpfx Apey Tm Dpsrjpk Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 13.030 h, številka stroja/vozila: 090038, prebijalna sila: 2.200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the nameplate: • Max. punching force: 220 kN • Type 9121 No. 090038 • Year of manufacture: 2001, spare parts included • Power supply: 400 V/50 Hz • Connected load: 29 kVA • Supply voltage: 400V • Control voltage: 24V DC • Required protection: 3x50A Fpedpfxounh D Do Aprjk • Compressed air connection: 7–14 bar • Machine weight: 17,500 kg Main features of the machine: - Tool rail – 21 tools and 4 clamps - Work area 3070 x 1660 mm - Max. sheet thickness 8 mm - Rotary axis of the tool head C1 and C2 - Forming function - Thread cutting function - MultiBend function - Pneumatic press - Automatic sliding of parts 500 x 500 mm - Water-cooled servo motors Additional machine equipment: - Light barrier - Softpunch function - Detail sliding sensor - Device for blowing off small parts - Chip extraction system - Separate lubrication for punching and threading tools NC operating hours: 13,030 h We sell machines without tools. The machine has been regularly maintained by an authorized Trumpf service partner using original spare parts; last service on 21.02.2024.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, obratovalne ure: 71.929 h, številka stroja/vozila: A0220A0610, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: SIEMENS, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: TRUMPF, model laserskega vira: TLF4000, laserske ure: 31.707 h, laserska moč: 4.000 W, vrsta hlajenja: voda, skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Leto izdelave: 2003 Model resonatorja: TLF4000 Skupno število ur delovanja pri rezanju: 14.124 ur Na voljo so zapisniki o vzdrževanju stroja od leta, ko je bil kupljen. Vse funkcije stroja delujejo brezhibno. Vse vzdrževalne posege je bilo izvedeno temeljito. RF cev stroja je bila nedavno zamenjana. Stroj bo opremljen s hladilno enoto Riedel in sesalno enoto Vanterm. Skupno število ur delovanja: 71.929 ur (Ta številka prikazuje samo število ur, ko je bil stroj vklopljen.) Skupno število ur aktivnega delovanja laserja: 31.707 (Ta številka ne prikazuje ur rezanja; prikazuje samo ure, ko je bil laser aktiven (vklopljen).) - Poleg rezanja pločevine stroj reže tudi cevi/profile. - Obseg rezanja: Črna pločevina, maksimalno 20 mm. Nerjaveče jeklo, maksimalno 8–10 mm. Aluminij, maksimalno 5 mm. - Dimenzije palete: 1500 x 3000 mm Vsa vzdrževalna dela na stroju so bila opravljena pravočasno in v celoti. Dokumentacija je na voljo. Na stroju ni okvarjenih delov. Fpodozquhuepfx Aprsk

Stanje: zelo dobro (rabljeno), Trumpf We are offering a laser and punching machine. Technical specifications: Power supply: 400V/50 Hz Protection: 3 x 100 A Connected load: 65 kVA Working area X x Y without repositioning Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (incl. 20 kN active stripper): 220 kN Active stripper (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum pass-through height: In punching mode: 35 mm In laser mode: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous strokes: Punching: 900 /min Marking: 2800 /min C-axis: Punching: 60 rpm Thread forming: 330 rpm Fpjdpfx Apezd Ulaerok Tools Tool stations in linear magazine: 19 (with 2 clamps) Number of tools with multitool use: 19 to 190 tools All tools can rotate 360° continuously Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm at all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Position deviation: ± 0.1 mm Mean position scatter: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Specifications, technical data, and information subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 4 mm, skupna masa: 11.000 kg, širina mize: 1.250 mm, dolžina mize: 2.500 mm, proizvajalec krmilnikov: Bosch, model krmilnika: Bosch, moč: 12 kW (16,32 KM), trajanje garancije: 3 meseci, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, varnostna svetlobna zapora, Ponujamo ta stroj v zelo dobrem stanju: TRUMPF TRUMATIC 500R, izsekovalni in orodjarni stroj, letnik 2000. To so že skoraj nesmrtni in zanesljivi stroji. Delovnih ur 40.000, priložen Black Box za povezavo v Lan-omrežje. Fpedpfx Apjza Nigsrsk Ob doplačilu lahko dodamo tudi licenco Tru-tops Punch. Stroj je shranjen v transportnem položaju v suhi in ogrevani hali, popolnoma funkcionalen, nadomeščen z novejšim modelom. Možna je zagotovitev TRUMPF serviserja znotraj EU. Vse informacije o stroju so na voljo v nemškem jeziku. Po želji lahko komunicirate neposredno s TRUMPF serviserjem, ki stroj pozna. Slika je samo simbolična. Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite sporočilo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, Maks. delovna velikost 3000 x 1500 mm Vstopna širina 3000 mm Rezanje železa do 20 mm, nerjaveče jeklo do 10 mm Skupne zunanje mere 9 x 5 x 2 m S Schmalz vakuumskim dvigalom do 750 kg, letnik 2018 Fedezb Uukopfx Aprepk S verižnim transporterjem za odvoz odpadkov Vključno z rezervnimi deli Demontažo mora opraviti kupec

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, obratovalne ure: 53.000 h, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik 840 D, vrsta laserja: CO₂ laser, laserska moč: 3.200 W, prebojni premer: 76 mm, najv. debelina jeklene pločevine: 8 mm, Oprema: dokumentacija / priročnik, hitroizmenjevalna naprava, hladilna enota, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, Posebna oprema: + 2000 na laserju TruFlow 3200 Fsdozdc Hmopfx Aprepk + Naprava za izpihavanje majhnih delov + Funkcija oblikovanja navojev s kontrolo preloma navojnega oblikovalca + Funkcija MultiShear + Funkcija zarezovanja + Funkcija označevanja/hitra izdelava utorov + Funkcija Softpunch + Dosledovalni valj + Vibracijsko dušena postavitev + Transporter za ostružke z nagibnim zabojnikom + Dodatna vpenjalna objemka Standardni opis proizvajalca: Standardna oprema: - Hi-Las visokotlačno rezanje - Laserska rezalna glava z 5'' lečo - Laserska rezalna glava z 7,5'' lečo - Sistem za hitro menjavo rezalne glave - programska izbira plina za rezanje/nastavitev tlaka - kapacitivna regulacija višine Dias III - Funkcija: ContourLas - Prepoznavanje žlindre v obliki stožca - Kompaktni izsesovalec prahu - Grelni rezervoar - 18 kaset za orodje - 18 matrica - Avtomatski menjalnik orodja z 19 postajami - 2 vpenjalni objemki - Rotacija vseh orodij - NC-krmiljen digitalni, brez vzdrževanja trifazni pogon - avtomatsko dosledovanje - kompenzacija dolžine orodja - Hitro izklapljanje hidravlike - Avtomatski izklop - 2 avtomatski drsni žlebi za dele do 500 x 500 mm - Senzorji za oba drsna žleba - 2 zaboja za dobre dele - Odsesavanje odrezkov pri prebijanju - Možnost preoblikovanja - programabilno mazanje stanjalnega orodja z 2 posodama - programabilna pritiskalna plošča - adaptivno krmiljenje dolžine hoda - Varnostne naprave - Daljinska diagnostična oprema - RJ 45 omrežni priključek - 3,5'' diskovni pogon - Podrobna navodila za uporabo

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC-stiskalnica in laserska naprava Trumpf, potrebna popravila, vključno z laserskim virom in visokofrekvenčnim generatorjem. Sila rezanja: 220 kN, laserska moč: 1500 W, moč vpenjanja: 11 kW, teža: cca. 18.000 kg. Napaka: NCK izbrisan in izpraznjena varnostna baterija. Ogled na lokaciji je možen. Fpjdjzfaaljpfx Aprsk

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, laserska moč: 3.000 W, X Working Area max.: 2500 mm Y Working Area max.: 1250 mm Control: IndraMotion MTX Laser Power: 3000 Watt Standard Equipment: Machine - Coordinate guides for highly precise machining - Sturdy, easily accessible C-frame - Linear tool magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF Laser - Solid-state laser TruDisk 3001 with 1 fiber outlet - Excitation via pump diodes - Fiber cable according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting Head - Solid-state laser compact cutting unit - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / repositioning) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level on the punching console - Level monitoring for thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data Fjdey Samujpfx Aprepk - Remote teleservice via Internet - Programmable cutting gas pressure - Automatic shut-off with wake-up mode Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warp detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction device - Vacuum sensors for each suction cup - Double sheet detector for double sheet check - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing for machine - Simultaneous loading and unloading during main operation - Peeling system incl. positioning aid for medium format (2500x1250) - First standard auxiliary suction package - Second standard auxiliary suction package - Unloading monitoring for laser parts GripMaster - Parts conveyor belt, punching station - Parts conveyor belt, laser station ToolMaster with 70 stations (punching mode only) - Simultaneous tool change during main operation (ToolMaster)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, laserska moč: 4.000 W, X axis working area max.: 3050 mm Y axis working area max.: 1550 mm Control system: Rexroth IndraMotion MTX Laser power: 4000 watts Standard Equipment: Machine - Sturdy, easily accessible C-frame - Precision coordinate guideways for high-accuracy machining - Linear tool magazine with 21 tool stations and 4 clamping claws - Drives with maintenance-free three-phase motors - Secondary clamping device with programmable hold-down - Foot switch for clamping claw closing - 2 containers for finished parts - Automatic shutdown feature Laser Station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guide - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal Quick-Change Cutting Head Unit UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast hatch for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook functionality Punching Station - Electro-hydraulic punching head Fpjdpfxey Saqge Aprek - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable pressure - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Sheet deformation detection - Flap for punched parts 500 x 500 mm - Monitoring of material fill level in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology database - Remote service (teleservice) Data Transfer - Network port RJ45 and USB interface Safety - CE marking - Multi-beam light curtains - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic emergency stop - Protection against stray radiation - Compact dust extraction unit - TruFlow 4000 - Vibration-damped installation - Thread forming function - MultiTool function - Chip conveyor with tipping container - Active die - Blow-off device for small parts - Brush tables with loading assistance - Marking function - Secondary cylinder - Sheet deformation detection

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Prebijalna sila: 220 kN Debelina pločevine: 8 mm Delovno območje: 2535x1280 mm Fedpfsyrcycsx Aprepk Debelina pločevine pri nerjavnem jeklu: 4-6 mm Dodatna oprema: - Pripravljalne kasete - Miza s kroglastimi valji - Obratovalne ure: 97.000

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, laserska moč: 3.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 115 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Working area: 3,000 × 1,500 mm Workpiece weight: 710 kg Drive and Control Drive: TLF 3000 Turbo Laser power: 3,000 W Controller: Siemens 840D Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 12 mm Sheet thickness (aluminium): 8 mm Fsdpfx Apey D H Iperspk MACHINE DETAILS Overall dimensions (L × W × H): 9,800 × 5,300 × 2,000 mm Machine weight: 11,500 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, obratovalne ure: 15.000 h, prebijalna sila: 18 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 3.050 mm, pomik osi Y: 1.550 mm, teža obdelovanca (maks.): 230 kg, PODROBNOSTI O STROJU Format: Veliki format Ure vklopa sevanja: 15.000 h Ure vklopa laserja: 59.000 h OPREMA Sheetmaster Toolmaster Fpsdpfsza Urgjx Aprjk Opomba: Stroj bo priključen na električno omrežje do 09.07.2026! Naslednji podatki izhajajo iz podatkovnega lista proizvajalca. Prodajalec ne jamči za pravilnost podatkov (Podatkovni list je priložen k oglasu): TEHNIČNE PODROBNOSTI Hod X-osi: 3.050 mm Hod Y-osi: 1.550 mm Maks. debelina pločevine: 8 mm Maks. prebijalna sila: 180 kN Maks. teža obdelovanca: 230 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, številka stroja/vozila: A0220A0572, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens Simunerik, vrsta laserja: CO₂ laser, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 8 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, delovna višina: 115 mm, teža obdelovanca (maks.): 710 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, skupna masa: 11.500 kg, skupna dolžina: 9.300 mm, skupna širina: 4.600 mm, skupna višina: 2.600 mm, leto zadnje generalne obnove: 2023, Oprema: CE označba, dokumentacija / priročnik, Wszystkie serwisy i przeglądy zostały przeprowadzone bezpośrednio przez producenta (Trumpf). Możliwość oględzin w dowolnym momencie. Plan montażowy w zestawie. Maszyna została zdemontowana i zmagazynowana przy współudziale i nadzorze firmy Trumpf. Możliwe również wsparcie przy montażu i uruchomieniu. Plan montażu dołączony do dokumentacji. Maszyna dostarczana jest wraz z LIFTMASTER Typ LMZ3050 0556817 / 256417 / udźwig 9000 N / rok produkcji 2003. Szczegóły na zdjęciach. Fpedpfx Asx Rt Ddoprek W zestawie wózki załadowcze i rozładowcze W zestawie przenośnik podłużny i poprzeczny do drobnych elementów/odpadów W zestawie ogrodzenie bezpieczeństwa Maszyna wraz z dużym magazynem części zamiennych (cena uzyskana od firmy Trumpf: wartość zakupu 42 000,00 EUR). Lista części w załączniku. Załadunek i transport maszyny został zrealizowany przez firmę SCHWERLAST Austria (koszt na terenie Austrii ok. 6 000,00 EUR).

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 7.900 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, proizvajalec krmilnikov: Siemens, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Trumpf, laserske ure: 7.850 h, laserska moč: 3.200 W, prebojni premer: 76 mm, Oprema: centralizirani mazalni sistem, hitroizmenjevalna naprava, hladilna enota, menjalnik šob, nožno daljinsko upravljanje, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, TruFlow 3200 Laser, including LensLine with optimized standby Nozzle change device Multitool drive "Multishear" function "Multibend" function "Tapping" function Fast "Marking" / "Ribbing" function "Engraving" function "Rolling" and "Deburring" function "Softpunch" function Active Die Stripline Repositioning with pneumatic cylinders Damped installation Chip conveyor with container Ball worktable with brush inserts Blow-off device Sheetmaster (3000 x 1500) Automatic sheet separation system with lateral air blow Additional positioning guides for format (2500 x 1250) Fodpfsx N Hyvox Apropk Additional positioning guides for format (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double carriages with toothed belt drive (3000 x 1500) Loading and unloading unit Good parts conveyor on punching side Good parts conveyor on laser side Storage interface No. 21 RTC tool cassettes incl. die holder plate

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 13.817 h, model krmilnika: Siemens Sinumerik 840 D, laserska moč: 3.200 W, prebijalna sila: 22 t, potovalna razdalja osi X: 2.585 mm, pomik osi Y: 1.280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser ON hours: 71,637 h Operating hours: 80,188 h EQUIPMENT Sturdy C-frame Coordinate guide with integrated linear magazine Maintenance-free three-phase servo motors Programmable hold-down device for repositioning Sensor-monitored part slides 500x500 mm for punching and laser station Ejector cylinder at laser slide Programmable cutting gas pressure adjustment Laser cutting head: 5'' lens, quick-change device, height control Multi-beam light barriers Quick-stop hydraulic system Extraction unit Fsdpfxey Iz H Io Apropk Compact dust collector Protective device against stray radiation at cutting head Brush table Marking function / fast beading Softpunch Blow-out device for small parts Repositioning cylinder Warpage detection Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.270 mm, teža obdelovanca (maks.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL SPECIFICATIONS Fjdpfxjx I Hh Rs Aprspk Pressing force: 220 kN Max. sheet thickness: 6.4 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360 °/sec Max. punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Max. workpiece weight: 150 kg Tool stations: 15 positions Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-on cylinders Small-part sensor for programmable part chute Parts box for good parts Chip conveyor with bin Scratch-free processing Air-cushioned installation Additional clamping unit Preparation for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Stop system for loading stack with spreading magnets Manually movable scrap frame system

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 31.411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine This punch-laser combination machine allows the flexibility of laser cutting to be combined with the advantages of punching. The simultaneous application of these two cutting technologies opens up numerous new possibilities: even complex sheet metal components can be produced. Technical Data Fsdpfeycuypsx Aprepk - Punching force: 165 kN - Maximum sheet size (X, Y): 2500 mm x 1250 mm - Maximum sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 to M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (for MultiTool): 2.2 s - Positional accuracy: ± 0.1 mm - Repeat accuracy: ±0.03 mm For optimum surface quality of the sheet metal components, the machine is equipped with a brush table and rollers around the forming tools. The MultiTool tool holders can accommodate up to 180 different forming tools. Thanks to shorter production cycles and lower energy consumption, the laser-punch combination machine enables lower part costs compared to flatbed laser cutting systems, ensuring greater economic efficiency. This equipment is ideal for the efficient, high-volume production of complex sheet metal parts. The laser cutting head allows for the cutting of intricate shapes, creates high-quality edges, and can be used when the required profile punching tool is not available.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 70.119 h, številka stroja/vozila: A0111A0021, model krmilnika: TruControl 1000, model laserskega vira: Festkörperlaser, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.270 mm, Oprema: CE označba, varnostna svetlobna zapora, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Part flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 Fiber optic outputs: 1 unit Fiber optic cable: 10 m Cutting Head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on hours: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision coordinate guidance for high-accuracy machining Linear magazine including 2 clamping claws Maintenance-free drives Automatic repositioning device with programmable hold-down Brush tables Good parts bin Chip container Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit High-longevity diode-pumped excitation Retrofitting option for up to 3 additional fiber optic outputs Quick-change cutting head device ControlLine Electro-hydraulic punching head Programmable hold-down Tool length compensation Stamp spray lubrication Slug extraction Open control based on Bosch PNC-P Operating panel with TFT color display Teleservice via internet Automatic shutdown USB interface Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Emergency hydraulic shutdown Stray radiation protection Additional fiber optic output for use on Trumpf system MultiTool function MultiBend function Thread forming function Marking / high-speed embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Fodpfoy R Uatjx Aprjpk Die spray lubrication Additional clamping claw Individually openable clamping claws Height-adjustable clamping claws Automatic clamping closing Repositioning cylinder with height-adjustable pressure pads Part chute sensor Loading and unloading aids for brush tables Vibration-damped installation Chip conveyor with tilting container Liftable brush segment Parts conveyor belt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, prebijalna sila: 15 t, skupna masa: 4.300 kg, največja dolžina izdelka: 3.800 mm, CNC punching machine from 1991. This TRUMPF TRUMATIC 120R offers a punching force of 15 tons and a maximum punch diameter of 38 mm. It provides a working area of 1000 x 2000 mm with repositioning and comes with a complete tool set. If you are looking for a high-quality punching machine, consider the TRUMPF TRUMATIC 120R that we are offering for sale. Contact us for further details on this machine. • Maximum sheet thickness: 4 mm • Maximum punch diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with repositioning: 1000 x 2000 mm • X/Y-axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool changer: 9 tool stations Fodpjymz Rcefx Aprepk • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation including machine history included Additional equipment • Large set of tools • Two additional tables to extend the working area

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 72.918 h, laserska moč: 2.700 W, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina aluminijaste pločevine: 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching operation: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Performance Laser power: 140 – 2,700 W Maximum sheet thickness: 8 mm Cutting capacity (mild steel): 8 mm Cutting capacity (aluminium): 4 mm Cutting capacity (stainless steel): 6 mm Maximum punching force: 220 kN Active hold-down (programmable in steps): 4.5 – 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Fodpfxsw Suwye Apropk Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm Thread forming: 180 rpm Punching stroke rate (E = 1): 900 strokes/min Marking: 2,800 strokes/min Tooling Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 – 5 s Accuracy Positional deviation: ±0.10 mm Average positional scatter: ±0.03 mm Programmable chutes for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: Siemens Sinumerik 840D-based MACHINE DETAILS Laser on-time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 62.769 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, TEHNIČNI PODATKI Debelina pločevine: 8 mm Prebijalna sila: 220 kN Pomik X-os: 3.000 mm Pomik Y-os: 1.500 mm Fjdpfjx I E Ezex Aprjpk PODROBNOSTI STROJA Krmiljenje: Siemens Teža stroja: ca. 17.500 kg Obratovalne ure: 62.769 h OPREMA Kontrola menjave položaja strgala Oblikovanje navojev Označevanje – hitro vtiskovanje Rezanje z režami Multishear Multibend Ponovno nastavljanje odmika Valjčna orodja Kasete za pripravo Kroglična miza

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 30.430 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, prebojni premer: 76 mm, TEHNIČNE PODROBNOSTI Tlačna sila: 220 kN Maks. debelina pločevine: 6,4 mm Premer prebijanja: 76,2 mm Pomik X-osi: 2.500 mm Pomik Y-osi: 1.250 mm Pozicionirna hitrost X-osi: 90 m/min Pozicionirna hitrost Y-osi: 60 m/min Pozicionirna hitrost simulacije: 108 m/min Pozicionirna hitrost rotacijske osi: 360 °/sek Fsdpfsxhfu Hjx Apropk Teža obdelovanca: 150 kg Najmanjša programabilna pot: 0,01 mm oz. 0,01° Število orodnih postaj: 15 kosov Čas menjave orodja: 1,5 - 6,5 s PODROBNOSTI STROJA Mere & Teža Dimenzije: 6.400 x 5.800 x 2.100 mm Približna masa stroja: 11.050 kg Obratovalne ure: 30.430 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 1.500 mm, TEHNIČNE PODROBNOSTI Delovno območje: 3.000 x 1.500 mm Maksimalna prebijalna sila: 220 kN Maksimalna debelina pločevine: 6 mm PODROBNOSTI STROJA Fpjdpfjxhfnajx Aprok Dimenzije in teža Dimenzije: 7.500 x 7.500 x 2.500 mm Približna teža stroja: 17.500 kg