Stöber R17/Vw1-1011-037-4 nakup rabljenega (59.692)

Stanje: dober (rabljeno), Geared motor, electric motor Psdpfxsb A Rf Ro Agxsgk - Speed: 4 rpm - Power: 0.12 kW - Design: B14 flange, angular - Shaft diameter: Ø 30 mm - Protection class: IP 54 - Weight: 30 kg

Stanje: dober (rabljeno), Geared motor, electric motor - Speed: 59 rpm - Power: 0.37 kW - Design: B14 hollow shaft - Shaft diameter: Ø 25 mm - Brake - Protection class: IP 54 Podpfx Aeb A Nmbsgxsgk - Weight: 30 kg

Stanje: rabljeno, prevoženi kilometri: 47.115 km, moč: 130 kW (176,75 KM), prva registracija: 10/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Leto izdelave: 2021, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, pogon na vsa štiri kolesa, INTERNAL VEHICLE NUMBER: M554 VW CRAFTER 2.0 TDI 4x4 4MOTION Mileage: 47,115 km | Full Service History Last inspection with oil change at 46,834 km on 31/10/2025 All services have been carried out at a manufacturer-authorized workshop. The vehicle history is available in digital form. 1st Owner | All-Wheel Drive (4MOTION) * Crosswind Assist * Hill Start Assist * Brake Assist (HBA) * Air Conditioning * Start/Stop System Equipped with 8 tires: * 4 x Mud Terrain off-road tires * 4 x As-new summer tires Gross vehicle weight: 3,500 kg Curb weight: 2,219 kg Payload: 1,281 kg * Electric front windows * On-board computer * Bluetooth hands-free system * USB * SD card * Mini SD card * Wooden flooring * Partition wall * 180° rear doors * Storage compartment in cab * LED interior lighting in cab * LED lighting in cargo area * 2 x 12V sockets Special Equipment: * Composition Audio system (radio, SD card interface, MP3 playback) * Universal wood cargo floor with adjustable lashing rails * Vehicle without lashing eyes * High wooden sidewall cladding in cargo/passenger area * Lashing rails in cargo area - on sidewall Additional Equipment: * Driver's airbag * Drivetrain: All-wheel drive * Left/right convex exterior mirrors * LED indicator lamps integrated in exterior mirrors * Rubber flooring in driver’s cab * On-board tools * Underside with aerodynamic cover * Dual headlamps * Dual-tone horn * Rear left/right entry assist handles at rear pillar * Assistance system: Hill Start Assist * Assistance system: Brake Assist (HBA) * Assistance system: Crosswind Assist * Power front windows * Laminated windshield * 2x folding remote keys * Grab handles A-pillars * Rear wing doors - no glazing * LED cabin lights * LED lights cargo/passenger area * High-roof van, standard * Super-high roof, body color * Fuel tank: 75 liters * Radiator grille with chrome strip * High cargo partition wall without window * Height- and reach-adjustable steering wheel/column * Headlight range adjustment, truck approval * Engine: 2.0L – 130 kW TDI * Multi-function display Plus * Rear fog lamp * Wheelbase: 3,640 mm * Tire repair kit * Compliant with Euro 6d emission standard * Right-side sliding door cargo/passenger area * SCR system (AdBlue technology) * Electromechanical power steering * Seat upholstery: fabric * Adjustable passenger seat in cab * Adjustable driver’s seat in cab * Steel wheels 6.5x16 * Engine start/stop system * 2x 12V sockets in cab * Grey front bumper * Seatbelt warning system (driver/passenger side) * Heat-insulating glazing * Central locking with remote & interior control * Permissible gross weight: 3.50 t --- Optional: We can retrofit a tow bar on request. Professional installation – fast and reliable, starting at €599. Pgsdpfxeyg Utwo Agxek ++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when switching vehicles! ++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive trade-in: We process quickly and fairly. With our bonus, maximize your vehicle’s value and benefit when buying a new model.

Stanje: novo, SEW-Eurodrive KHF37 R17 DRN71M4/BE1HF/ASB8/AK8W motor, serial number 01.8018534801.0001.21, unused, with storage marks, 100% fully functional. Scope of delivery as per photos. Pgodpfx Agoqlw Syexek

Stanje: pripravljen za uporabo (rabljen), Jahns ARH-0-GM76C002-PPH-R2-400-LG600 motor with Stöber C002F0175D63K4 gearbox, serial number as per photo, used, normal signs of wear, fully functional, scope of delivery as per photos. NOTE: Please enquire separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Pedpfei D Ixcex Agxegk

Stanje: rabljeno, TIG torch package, welding torch, hand welding torch, TIG torch - TIG torch package: Torch type SR-17, air-cooled - Length: 4 m - Tuchel connector: 5-pin Pedjilx R Repfx Agxegk - Weight: 1.8 kg

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor - Manufacturer: SEW-Eurodrive, Gear motor type SA47/T R17 DR63S4/TF - Speed: 4.7 rpm Pgjdpfx Agogx Amyoxjk - Power: 0.12 kW - Hollow shaft: Ø 30 x 110 mm - Protection class: IP54 - Quantity: 1 gear motor available - Price: per unit - Dimensions: 490/170/H255 mm - Weight: 18 kg/unit

Stanje: rabljeno, Connector, plug, single-conductor terminal block, -Manufacturer: Wago, single-conductor terminal block, carton with 50 pieces Pgsdpfx Asuuu Hlsgxjk -Type: 734-107/037-047/ 7-pole -Quantity: 7 cartons available -Price: per carton -Carton dimensions: 200/145/H40 mm -Weight: 0.4 kg/carton

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 4-groove belt pulley - V-belt width: 13 mm - Bore: Taper Ø 101 - 107 mm / taper bush 3020 - Dimensions: Ø 320 x 65 mm - Weight: 15.7 kg Pjdpju Sv Uasfx Agxjgk

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor, helical gear motor, gear motor with brake, frequency-controlled gear motor, adjustable gear motor, variable speed gear motor - Manufacturer: SEW-Eurodrive, adjustable gear motor with brake - Type: R17 DT71D4/BMG/MM05 Psdpfsq U T Acjx Agxogk - Drive motor: with Movimot frequency inverter - Speed: 290–64 rpm / i = 4.51 - Power: 0.055/0.55 kW - Shaft: Ø 20 x 40 mm - Protection class: IP55 - Brake: 5 Nm - Quantity: 3 motors available - Price: per unit - Dimensions: 430/145/H200 mm - Weight: 15 kg

Stanje: pripravljen za uporabo (rabljen), Stöber K102AG0060 menjalnik SN: YFB526726501004, rabljen, v dobrem stanju, 100% delujoč, dobava v skladu s fotografijami. Podpfsx Dwcuex Agxogk

Stanje: pripravljen za uporabo (rabljen), SEW R17 DR63S4/BR/TF 0,12kW zavora V 220-266 Ac Serijska številka: 01.7389636401.0002.16, rabljeno, dobro ohranjeno, 100 % delujoče, dobava po slikah. Psdpfxow D Ncvj Agxjgk

Stanje: novo, Bosch SE-B5.700.030-14.037 brezkrtačni servomotor št. 1070076734, SN, neuporabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave po fotografijah. POZOR: Stroški pakiranja in pošiljanja na zahtevo posebej! Pgsdpfx Agji D Hfasxsk

Stanje: pripravljen za uporabo (rabljen), emod 160L / 4T-FOL71S/4 trifazni motor z ventilatorjem SN:3037560, rabljen, z običajnimi znaki uporabe, 100% delujoč, obseg dobave po fotografijah. POZOR: Stroške pakiranja in transporta prosimo povprašajte posebej! Pjdpfxoi D Hulj Agxjgk

Stanje: zelo dobro (rabljeno), For sale: high-quality SIEMENS industrial electric motor – robust German engineering, designed for use in demanding applications. The motor is equipped with an encoder (2048 pulses) and a temperature sensor, providing precise control and operation monitoring. Cosmetic condition is good – typical signs of use as expected for industrial equipment. Technically, the motor is fully functional. ⚙️ Technical data Manufacturer: SIEMENS Model: 1PH7167-2NF03-0BJ0 Type: 3-phase electric motor Power: 37–45 kW (depending on voltage) Voltage: 350–459 V Current: 76–82 A RPM: 1500 / 1750 / 2000 Duty cycle: S1 (continuous) Protection rating: IP55 / IP54 Encoder: D01 2048 PPR Temperature sensor: KTY 84-130 Standard: EN 60034 Country of manufacture: Germany 📌 Additional information ✔ Sturdy SIEMENS industrial build quality ✔ Fitted with a pulley Pgjdpfxsyyppnj Agxsk ✔ Complete cabling set + encoder included ✔ Ideal for CNC machines, production lines, industrial drives ⚠️ Condition / notes Motor in good technical condition Normal signs of use visible One mounting ear has a minor crack (visible in the photo) – does not affect the operation of the unit. 🚚 Shipping / collection Pallet shipping available Personal pickup possible Assistance with transport organization offered

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.000 mm, skupna širina: 1.200 mm, skupna višina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 10 kW (13,60 KM), SOEST Universal Surface Line for oiling, staining, lye treatment, patinating, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes. Suitable for distributing, working in, or patinating surface media into pores and/or for removing, spreading, and distributing materials to achieve desired surface effects. 3) Accessories: two replacement application rollers, brand new material pump (never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface line is constructed for professional industrial use and is configured with full equipment options. A lot of additional accessories are included, such as extra rollers and cleaning machines. (See pictures!) Very robust construction, all motors with frequency control (Siemens). Speeds are steplessly adjustable in both forward and reverse operation. Maximum workpiece width approx. 410 mm. Pjdpfx Aoyaiafegxjgk The line is in excellent condition with only about 180 operating hours and is therefore described as like new. This surface machine was only used as an auxiliary line in a parquet manufacturing facility and was only operated for certain surface techniques, which explains the low operating hours. It was only sporadically in use from 2019–2022. In 2023, our company downsized, and the machine has been stored ever since. It is therefore immediately available and is in almost pristine condition! We no longer require this line; therefore, it is for sale. The original price for this line in 2019 was approx. €87,000. The current selling price is negotiable. The surface line can be inspected by appointment. If required, we can also sell 10 drying trolley racks with this line. (YouTube video is only a sample video of a similar line configuration!)

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza Psdpjx Hllxefx Agxegk - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Psdpfx Agjy Dg N Tjxsgk Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: Pgodjd Tbbdjpfx Agxsk - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard Pgodofdkb Topfx Agxek - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Pjded Tqalspfx Agxsgk - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. Pgsdpfx Agefdkb Usxek When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Psdpsguk A Hefx Agxjgk Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) Psdpfjfdkbhex Agxsgk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm Pgjdeguk Dkjpfx Agxek - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.