Sick Gmbh Mcs 100Ft/F nakup rabljenega (86.356)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, Ljdpfxsyz Af Es Al Nohf We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predmet ponudbe je kompaktni stroj za deljenje in oblikovanje žemljic Mini Rex Futura, ki se odlikuje po visoki zmogljivosti in širokem razponu teže ob ohranjanju visoke kakovosti obdelave testa. OPIS NAPRAVE Delilno-zaokroževalni stroj za žemljice Mini Rex Futura, letnik 2011. Ročni vnos testa v lijak Dvoradno delovanje Ročni prevzem izdelkov s transportnega traku Zmogljivost: 33 ciklov/min ; 3960 kos/h Tehtni razpon: L: 25g – 75g ; H: 70g – 140g Krmilna plošča Testo: pšenično, graham, kvašeno, krofi Enoosebno upravljanje Dimenzije stroja (v x d x š): 1800 x 1770 x 650 mm Razpoložljivost: Predviden zaključek obnove: konec maja letos. Lhodpsy Angqofx Al Nsf Prikazna fotografija podobnega stroja po generalni obnovi v Cream Servisu. Pišite nam za ponudbo in več informacij.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Ledpfxoyq Hgks Al Nohf Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, !! Izdelek na zalogi, z veseljem vam svetujemo !! Lhodjrlm Itepfx Al Nof Novo////: Sick Safety Relais FX3-XTIO84002

Stanje: rabljeno,

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) Ledpfx Asv Sybysl Nohf • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za polnjenje in zapiranje steklenic Holdefleiss tip 12/3. Stroj je pripravljen za 0,5 l Euro in 0,33 l Long-Neck steklenice, vključno z HDE. Stroj je brez predvakuumskega sistema, opremljen z dolgocijevnimi polnilnimi ventili. Polnilni ventili bodo na novo zatesnjeni. Izvedeta se test tesnosti in tlačni preizkus. Lsdpfx Alsyycudj Njhf

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Ledpfx Aloyz Sn Ns Nehf

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Lodpfxewtnl Ue Al Nshf

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system Lhedpfx Alju Smcbo Nsf

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. Lhsdsy D Hrbjpfx Al Nef The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Ljdoyn Rmijpfx Al Nohf Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm

Leto izdelave: 2024, stanje: pripravljen za uporabo (rabljen), The heat exchangers are part of the system and were merely ordered separately. The initial purchase price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024, however, this only involved trial runs and not continuous operation. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminium Billets (Used System) Machine type: Modular chamber furnace system with heat recovery Intended use: Homogenization (heat treatment) of aluminium billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Configuration The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating Lhedpjyt Ihbefx Al Nef • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Switchgear with PLC control (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). For further information, please refer to the attached PDF.

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal Lhsdpsw Ivvcefx Al Njf

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t - Za tirni sistem - Baterijski pogon - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance Lsdpfx Ajyyxidsl Njhf

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ročni strojni voziček za peskalno napravo, nosilnost 5 t Lhodpfx Asyyxa Njl Nef - D= 3000 mm, Š= 1500 mm, V= 500 mm - Nosilnost: 5 t - Peskalni voziček s obročastimi valji za tirnice v peskalni hali - Profili postavljeni pokonci, da lahko peskalni material odteče - Vlečne zanke za viličarja - Vrtljiva miza na voljo kot opcija

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ODW 2687/20, THROUGHFEED PRESS FOR SANDWICH ELEMENTS The system is part of a larger production line; please refer to our other listings for more information. The plant is fully enclosed and equipped with a walk-on maintenance platform above the press. Lhjdpeyt Rhkofx Al Nof WORKPIECE DIMENSIONS (from previous production): Length: 2000mm - 8500mm Width: 1500mm - 2500mm Thickness: 12mm - 60mm Maximum batch weight: 60kg (can be increased upon consultation with the manufacturer, without modifications) TECHNICAL DATA: Total pressing force: 4,250kN Specific pressure: 10 - 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110mm Individual cylinder control: yes Hydraulic operating pressure: 20 - 280bar Platen opening: 150mm Maximum operating temperature: 80°C Approximate press weight: 57,000kg Required air pressure: 6 - 10bar Required extraction volume at air speed v = 30m/s: 3,400m³/h Thermal output: 2x 110,000 kcal/h Heating medium: hot water Customer inlet temperature: 85 - 95°C Separate heating of upper and lower heating plate Cooling system for temperature reduction of heating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066mm Length: 9,604mm Height approx.: 5,013mm

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. Lhsdpfsyt Nm Sjx Al Nsf COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3200 0088, skupna masa: 2.000 kg, skupna dolžina: 7.300 mm, skupna širina: 1.100 mm, skupna višina: 2.000 mm, vhodna napetost: 400 V, vhodni tok: 125 A, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, hladilna zmogljivost: 30 kW (40,79 KM), obratovalna hitrost: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Item no. 3200 0088 Technical Data Condition: as new; hardly used, only for test series Functionality: fully operational Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, on-site water connection: 30 kW Conveyor length: 7,000 mm Conveyor width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Lodownm Ukopfx Al Nehf Application: Tunnel oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Total height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Stainless steel tubular frame, height-adjustable: ± 30 mm Conveyor system Vacuum silicone transport belt, 310 mm wide Transport speed: max. 5 m/min Conveyor height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Clearance at belt infeed: approx. 750 mm Clearance at belt outfeed: approx. 750 mm Conveyor operation: Continuous, adjustable up to max. 5 m/min, with straight-run guiding via track rollers, light barrier safety at infeed and outfeed. Manual loading and unloading. Intended Use The curing oven is a conveyor system for continuous operation with a feed rate of max. 5 m/min. There is an open area at both infeed and outfeed for loading and unloading components. The enclosed heating section, located between, is equipped with 6 IR modules (height adjustable). The component temperature is max. 100°C and serves for heating solvent-free adhesive within a film composite. The return section of the belt, the backs of the IR modules, and the area above the heating modules are water-cooled. Components are vacuum-held on the conveyor belt. The control cabinet is located separately from the machine outside the cleanroom. The system is operated in a cleanroom in accordance with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is exclusively designed for the heating of film composites. Equipment - 6 adjustable infrared heating modules, each with 6 IR emitters - 6 pyrometers for precise temperature control - PU transport belt for efficient material handling - Integrated control and regulation system - Height-adjustable stainless steel support frame - Vacuum transport belt - Cooling water distribution in base frame (G1") - Water cooling for belt return and back of IR modules - Mechanically interlocked service doors - Operator panel mounted on the left side at infeed - Control cabinet cooler, water connection required on-site History This oven was intended for use in a cleanroom environment and was only sparingly used for trial runs. The oven was employed for curing solvent-free adhesives in film composite assemblies.

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AU170124-01, PREVIOUS APPLICATION: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Travelling gantry with synchronized drive Vacuum lifting beam with automatically controlled suction rows, switching on/off depending on the component length Vacuum generator Schmalz with area gripper Clamping cartridges adjacent to the suction cups ensure vacuum activation Z-axis lifting movement of the suction frame via scissor guides Z-axis with asynchronous motor, MoviDrive frequency inverter, belt drive Interfaces to upstream and downstream stations Siemens S7-300 control system Lsdpfx Alsytphie Njhf CONTROL CABINET: Power supply, power and control section with main switch, power supply unit, motor protection switches, circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of one CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet connection, required digital input and output cards, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Stanje: novo, Leto izdelave: 2023, Kamerični čitalnik kod Sick, ZV2D621D-2MSFBB5 Lector62x, V2D621D-2MSFBB5, Kode / nosilci podatkov: 1D-kode, naložene, 2D-kode, neposredno označene kode, čitljivo besedilo, komunikacijski vmesnik: Ethernet, PROFINET, EtherNet/IP, EtherCAT®, serijski, CAN, CANopen, PROFIBUS DP, uporaba pri globokem zamrzovanju: ne, ločljivost senzorja: 1.280 px x 1.024 px, optična ostritev: teach-avtofokus, osvetlitev: integrirana, barva osvetlitve: rdeča-modra, leča: integrirana, 9,6 mm Na voljo je 25 kosov! Ljdpfsyz Afxjx Al Njhf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, obratovalna teža: 2.000 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,025 m³, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: gumene gosenice, hidravlika, kabina, nastavljivo podvozje, parkirni grelec, 💥 ONLY UNTIL THE END OF THE MONTH: 10% DISCOUNT ON THE COMPLETE SET! 💥 HT20 PRO AS A SPECIAL PROMOTION – ACT NOW AND SAVE! Instead of €13,500 net, now only €12,150 net Are you looking for a compact, powerful, and immediately ready-to-use mini excavator at an especially attractive price? Then the HT20 PRO is the perfect choice. Take advantage of our end-of-month special promotion and secure a fully equipped complete set with a 10% discount. ⭐ YOUR BENEFITS AT A GLANCE ✔ Original Kubota D902 engine – reliable, fuel-efficient, and durable ✔ Precision load-sensing hydraulics for clean and efficient work ✔ Comfortable cab with air conditioning and heating ✔ Adjustable undercarriage – ideal for confined job sites ✔ Robust and stable steel construction for daily professional use 🔥 SPECIAL OFFER UNTIL THE END OF THE MONTH Included in the promotional set: ✅ HT20 PRO mini excavator ✅ Hydraulic quick coupler ✅ 3-bucket set You receive a turnkey complete solution with premium features and maximum flexibility for your job site. ⚙️ TECHNICAL DATA Lhsdpfxsx Hvvho Al Njf Kubota D902 diesel, 3-cylinder Power: 11.8 kW Operating weight: 2,000 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Max. digging depth: 2,060 mm Max. reach: 3,130 mm Max. dump height: 2,875 mm 🚀 IMMEDIATELY AVAILABLE ✔ Machine in stock ✔ Ready for use upon delivery ✔ Europe-wide delivery possible ✔ Spare parts and service available locally ✔ 12-month warranty 🎥 ADDITIONAL BENEFITS FOR BUYERS ✔ Video of the machine available on request ✔ On-site inspection possible ✔ Machine testing available by arrangement See for yourself the condition, features, and performance before you buy. ✅ WHY THIS OFFER? ➡️ 10% discount on the complete set ➡️ High-quality professional features included ➡️ Immediately available and ready for use ➡️ Transparent consultation and individualized support ➡️ Only for a limited time until the end of the month 📍 LOCATION Rheda-Wiedenbrück ⏳ INQUIRE NOW AND SECURE THE SPECIAL PRICE 👉 Contact us now and secure your promotional set with a 10% discount – only until the end of the month! 👉 Video available on request – inspection and test possible at any time by appointment.

Stanje: novo, Leto izdelave: 2026, skupna masa: 3.900 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: temno rdeča, moč: 2.000 kW (2.719,24 KM), Izhodni tok: 360 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 200 kW (271,92 KM), nazivna (navidezna) moč: 250 kVA, neprekinjena moč: 200 kW (271,92 KM), neprekinjena (navidezna) moč: 250 kVA, skupna dolžina: 4.000 mm, skupna širina: 1.450 mm, skupna višina: 2.300 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Perkins, vrsta hlajenja: voda, Diesel generator set 250 kVA Generator type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Alternator: Leroy Somer LSA 46.3 M7 Rated output (standby/ESP): 275 kVA / 220 kW Rated output (prime/PRP): 250 kVA / 200 kW Rated output (continuous/COP): 200 kVA / 160 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Control voltage: 12VDC Speed regulation: Electronic Voltage regulation: Electronic (AVR) Lodpfjfxlddox Al Nehf Sound-insulated, weatherproof Earthing system: TN-C Incl. control unit Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (600 L) Incl. integrated bund for fuel and engine fluids Incl. circuit breaker (ABB, 4P) Incl. documentation/manual Incl. wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order numerous optional features: - Socket package 16A - 125A with residual current device (RCD, all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (up to 65 dB at 7m possible) - Fully automatic emergency power system with automatic mains-generator transfer switch available on request - Grid parallel operation with load sharing and peak load (ComAP IG 1000 control, VDE 4510 certified) - CHP version - Emergency power system (NEA) for indoor installation with air ducts, ventilation, etc. Manufactured in Germany / Made in Germany Delivery nationwide for an additional charge possible. Contact us by email or give us a call – we will be happy to advise you and provide a non-binding quotation.

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. * Ljdeytcf Uepfx Al Nohf

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-078, Multifunctional CAM cutting system using pure waterjet technology – without abrasives (waterjet cutting machine) 2 cutting bridges with 2 cutting heads, including Z-axis 1 head with bevel (angle) cutting capability 1 head for 2D cutting Suitable for cutting foam, plastics, technical textiles, and other planar, flexible, non-metallic materials. Lhjdpefhgvwjfx Al Njf Maximum material passage height: 140 mm Cutting area in X and Y: 2,850 mm x 2,750 mm Protection class: IP54 Includes BFT 40.22 high-pressure pump (Product photo serves as an example) The machine is CE-certified.