Sahinler Pritisnite nakup rabljenega (243)

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Upper roller diameter: 137 mm Lower roller diameter: 137 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar vertical (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar horizontal (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø22 mm / 200 mm Tube (cross-section / min. diameter): Ø40x1.5 mm / 500 mm Nljdpfx Aleynnhkjisd Rectangular tube vertical (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Square tube (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle steel leg outside (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle steel leg inside (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rollers (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rollers Usable both horizontally and vertically Standard roller set Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Njdpfx Aoynm Euolisld Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Nljdpfxeynm Ens Alijd Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Nlsdpfx Aloynm Ehoied Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Nodoynm Ebepfx Alisld Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Nodpeynm D Rofx Alijld Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Njdpfx Aleynmzpeield Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Njdpfx Aloynmylsisld Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Nljdpfeynmyfjx Alisd Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Nledpsynmx Iofx Alijd Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Sheet length: 1,020 mm Sheet thickness: 1.5 mm Total power requirement: - Weight approx.: 450 kg Dimensions (LxWxH): 2000 x 850 x 1500 mm Technical Data Sheet thickness: 1.5 mm Cutting length: 1270 mm Length: 2,300 mm Width: 1,050 mm Height: 1,550 mm Weight: 490 kg Equipment Suitable for through-feed sheet cutting – allows for cutting of unlimited lengths Angle stop Upper blade with counterweight Rear gauge with spring-loaded stop, adjustable via hand wheel and clamping lever Angle gauge Nlsdod Ab Hbspfx Alisd Swivelling hold-down device Operating instructions available in GERMAN and ENGLISH

Stanje: novo, Pressure: 100 Stroke: 300 mm Ram surface: 600 x 900 mm Table surface: 700 x 1100 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8 mm/s Return speed: 165 mm/s Motor: 11 kW Includes light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating 4-way ram guides Clamping plate with T-slots Design in accordance with CE regulations Pressing force: 100 t Pressure: 240 bar Table: 1100 x 700 mm Ram dimensions: 900 x 600 mm Table bore: 120 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8.5 mm/s Return speed: 165 mm/s Motor: 11 kW Length: 2,180 mm Nedpfod Ab Ihex Alisld Width: 1,600 mm Height: 3,150 mm Weight: 6,500 kg

Stanje: novo, Drawing cushion stroke: 200 mm Installation height: 600 mm Pressure: 60 bar Stroke: 350 mm Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple plunger guides Bolster plate with T-slots Manufactured in accordance with CE regulations (Stock photo) Pressing force: 60 t Pressure: 170 bar Table: 1000 x 600 mm Ram dimensions: 850 x 550 mm Njdpfx Aljd Ab Iijisld Table opening: 100 mm Stroke: 350 mm Installation height: 600 mm Rapid traverse: 100 mm/s Working speed: 10 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Pressing force 24 t; Stroke 150 mm; Pressure 156 bar; Return speed 65 mm/s Dimensions: 300 x 300 mm Length: 1,670 mm Width: 1,520 mm Height: 3,000 mm Weight: 7,000 kg

Stanje: novo, Pipe diameter: 10–114 mm Abrasive belt dimensions: (2x) 50 x 940 mm Abrasive belt speed: 3–22 m/s Details: Technical specifications: - Working capacity Ø: 10–114 mm - Number of grinding units: 2 - Belt speed: 3–22 m/s - Belt dimensions: (2x) 50 x 940 mm - Motor power: 5 kW - Weight: 265 kg - Perfect choice for grinding and polishing - Ideal for round and oval pipes - Foot pedal for opening the belts enables easy insertion and removal of the pipe - Machine equipped with 2 permanently rotating triangular grinding units - Machine and equipment comply with CE regulations - Operating manual available in GERMAN and ENGLISH Nodpfx Alod Ab U Doiold

Stanje: novo, Pressure: 22 Stroke: 200 Table size: 625 x 1,100 mm Total power requirement: 2.2 kW Weight approx.: 0.635 t Dimensions (LxWxH): 1,100 x 0,630 x 0,925 m Approach speed: 1,750 mm/min Working speed: 450 mm/min Return speed: 2,000 mm/min Distance between mounting pins min/max: 110 / 310 mm Pin diameter fixed/movable: 55 mm Mounting pin height: 120 mm Oil tank: 45 l • Cylinder mounted underneath • Stroke adjustment possible under pressure • Two-hand control and foot pedal • Central lubrication Tools available on request Neded Ab Ibepfx Alijld For catalog, see the following link:

Stanje: novo, Drawing cushion stroke: 200 Drawing cushion manual and automatic operation self-lubricating ram guides Design in accordance with CE regulations Light barrier Pressing force: 30 t Pressure: 160 bar Table: 900 x 600 mm Ram dimensions: 800 x 500 mm Table bore: 80 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 18 mm/s Return speed: 165 mm/s Nlodped Ab Ikjfx Aliod Motor: 11 kW Drawing cushion: Pressing force 12 t; stroke 150 mm; pressure 130 bar; return speed 100 mm/s dimensions: 250 x 250 mm Length: 1,670 mm Width: 1,520 mm Height: 2,850 mm Weight: 6,000 kg

Stanje: novo, Press force indication: none Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple ram guides Nlsdpfxod Ab Ine Alied Clamping plate with T-slots Execution in accordance with CE regulations (Stock photo) Press force: 60 t Pressure: 170 bar Table: 1000 x 600 mm Ram dimensions: 850 x 550 mm Table bore: 100 mm Stroke: 250 mm Installation height: 500 mm Rapid traverse: 100 mm/s Working speed: 10 mm/s Return speed: 165 mm/s Motor: 11 kW Length: 1,670 mm Width: 1,520 mm Height: 2,850 mm Weight: 5,300 kg

Stanje: novo, Angle iron/leg length: 60 x 60 x 6 Double-T beam across x-axis: UPN 80, UNP 30 U-channel across x-axis: UPN 65, UPN 30 Total power requirement: 3 kW Weight approx.: 1.4 t Dimensions (LxWxH): 1200 x 1100 x 800 mm - 4 rollers, 2 driven rollers - 3 hydraulic adjustments - Universal rollers - Lateral guide rollers Nlsdpfjd Acazox Alisd - Control panel

Stanje: novo, Dimensions (LxWxH): 2040 x 950 x 2180 mm Approx. weight: 2,940 kg Total power requirement: 11 kW Square steel: 50 mm Throat: 355 mm Round steel: 55 mm Flat bar shear: 380 x 25 mm Notching (thickness x width x depth): 13 x 60 x 100 mm Punching – Round: 34 x 26 mm or 55 x 16 mm or 110 x 5 mm Angle steel cutting 90° or 45°: 150 x 150 x 16 mm or 80 x 10 mm Pressure: 115 t With two cylinders, hydraulic 5 Workstations: - Punching station - Notching station, as well as flat bar, bar, and angle steel cutting stations Includes the following features: - With two hydraulic cylinders - Support table at the notching and flat bar stations with stops - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat bar station with stops - 1,000 mm electric length stop for automatic cutting activation - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE compliant PROPERTY DESCRIPTION / VALUE Model: HKM 115 Punching force: 115 t Throat: 355 mm Stroke: 80 mm Strokes per min. (at 20 mm stroke): 25 Max. plate thickness: Ø 34 x 26 mm Working height: 935 mm Shearing capacity: 600 x 15 mm; 380 x 25 mm Angle steel 45° (single leg): 80 x 80 x 10 mm Nledpfsh Hvnijx Aliod Angle steel 90°: 150 x 150 x 16 mm Blade length: 610 mm Round: 55 mm Square: 50 mm Material thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor power: 11.0 kW Network voltage: 400 V / 50 Hz Height: 2,180 mm Weight: 2,920 kg

Stanje: novo, Dimensions (LxWxH): 2730x1150x2280 mm Approximate weight: 6000 kg Total power requirement: 11 kW Square steel: 55 mm Round steel: 65 mm Punching force: 175 kN Throat depth: 625 mm Flat bar shear: 380x30 mm or 600x20 mm Notching (Thickness x Width x Depth): 16x60x100 mm Punching – Round: 40x32 mm or 57x22 mm or 125x5 mm Angle steel cutting at 90° or 45°: 200x200x20 mm or 80x10 mm - 5 workstations Nljdpsh Hvnmsfx Aliod - with 1 foot pedal - hydraulic drive - table at the punching station and notching station with stop - operating manual in GERMAN and ENGLISH We have many references!

Stanje: novo, Shaft diameter: 315 mm Working speed: 7 m/min Motor power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight approx.: 3650 kg Technical specifications: - Welded frame made of steel construction - 3 rolls are driven - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground Nsdpfsh Alicex Aliold - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital readouts (2 pcs) Options: - STANDARD digital readout - NC unit 7 Screen EURO 9,000,--

Stanje: novo, Sheet length: 2050 mm Sheet thickness: 3 mm Total power requirement: 2.2 kW Weight approx.: 1,500 kg Dimensions (LxWxH): 3,200 x 750 x 1,000 mm Technical Data Roller diameter: 130 mm Nljdpfx Aed Ab H Aolied Equipment • 3 rollers • Asymmetric roller arrangement – with pre-bending • 2 driven rollers via brake motor • Upper roller can be swung out to the front • Forward/reverse operation • Conical rolling by tilting the rear roller • Movable control panel Operating instructions in GERMAN Catalogue available at the following link:

Stanje: novo, Drawing cushion press force: 30 tons Drawing cushion return speed: 52 mm/s Drawing cushion stroke: 200 mm Installation height: 750 mm Pressure: 150 bar Stroke: 500 mm Nlsdpfx Alsd Ab Iljisd with drawing cushion Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple ram guides Clamping plate with T-slots Design according to CE regulations (Symbol image) Press force: 150 tons Pressure: 254 bar Table: 1200 x 750 mm Ram dimensions: 950 x 650 mm Table bore: 120 mm Stroke: 500 mm Installation height: 750 mm Rapid traverse: 100 mm/s Working speed: 5.5 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Press force 32 tons; stroke 200 mm; pressure 160 bar; return speed 40 mm/s Dimensions: 540 x 720 mm Length: 2,225 mm Width: 1,600 mm Height: 3,850 mm Weight: 10,000 kg

Stanje: novo, Ejector Press Force: none Light Barriers Manual and Automatic Operation Manual Stroke Adjustment via Cam Switch Maintenance-free, Self-lubricating 4-fold Ram Guides Clamping Plate with T-slots Manufactured in Accordance with CE Regulations (symbolic image) Pressing Force: 30 t Pressure: 160 bar Table: 900 x 600 mm Ram Dimensions: 800 x 500 mm Table Bore: 80 mm Stroke: 200 mm Nlodsd Ab Ipopfx Aliod Installation Height: 450 mm Rapid Traverse: 100 mm/s Working Speed: 18 mm/s Return Speed: 165 mm Motor: 11 kW Length: 1,650 mm Width: 1,520 mm Height: 2,750 mm Weight: 4,700 kg

Stanje: novo, Tlak: 150 Hod: 300 Razmik med stojali: 1570 Delovna hitrost: 5 Hitrost vračanja: 10 Delavnica stiskalnica: Jekleno varjena konstrukcija Poljubna pozicija zaustavitve Merilnik tlaka Varnostni ventil proti preobremenitvi 2 V-prizme Nastavljiva višina mize Naprava za dvig/spust mize Krmiljenje z ročico Oprema v skladu s predpisi CE Navodila za uporabo v NEMŠČINI Nljdped Ab Ndofx Aliod (Slika je simbolična) Tlačna sila: 150 ton Moč motorja: 11 kW Hod: 300 mm Razmik med stojali: 1.570 mm Premer bata: 280 x 200 mm Hitrost pomika: 9 mm/s Delovna hitrost: 5 mm/s Hitrost vračanja: 10 mm/s Dolžina: 2.500 mm Širina: 1.000 mm Višina: 2.270 mm Teža: 2.100 kg