Sahinler Einständerpresse Sahinler Hkp 150 nakup rabljenega (10.189)

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m Bdodpfx Ajy E Nn Ujkrec 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Kaltzufuhr Gummi Vakuumextruder 150mm 20d Baujahr: 2020 Zustand: neuwertig Maschinentyp: E150-01-00 Schneckendurchmesser: 150 mm Schneckendrehzahl: 1–50 U/min Max. Ausstoß: ca. 1000 kg/h Temperaturregelsystem Heizzonen-Anzahl/-Leistung: 6 kW × 7 Anwendung: Gummiextrusion zum Mischen, Plastifizieren und Extrudieren von Produkten in vorgegebenen Abmessungen entsprechend je nach Formkopf Abmessungen (L×B×H): 4200 × 1600 × 1500 mm Extrusionssystem Zuführungsart: Seitenwalzenantrieb über die Schnecke, aktive Zuführung Zuführungsstruktur: Zuführwalzengetriebe und Schneckengetriebe mit automatischer Schmierung Schneckenmaterial: 38GrMoAlA Schneckenhärte: HRC 65–68 Härte Zylinderbuchse: HRC 65–70 Nitrierhärtungstiefe: 0,4–0,7 mm Schneckenaufbau: mit Entlüftungsnut, sehr gute Leistung Druckregelung: Mit Drucksensor. Der Druckschutzwert ist zwischen 0–35 MPa einstellbar, zusätzlich Temperatursensor vorhanden L/D-Verhältnis: 20:1 Kühlsektion: 1 Sektion (Seitenwalzen) Vakuumpumpenleistung: 2,2 kW Temperaturregelung: Automatische Heizungsregelung, Kühlung über Magnetventil Umwälzpumpe: Weile Kühlwasserdruck: 0,15–2 kg/cm² Temperaturgenauigkeit: ±1°C Verbindung Schnecke und Getriebe: Evolventenverzahnung Antrieb von Motor und Getriebe: Riemenantrieb Hochleistungsgetriebe: Typ ZLYJ420-28-I (Evolvente) Drehzahlregelung: Frequenzumrichter Bdodpfx Aksy Ez Ererjc 2. Gummiplattenkopf (pneumatisch) 1. Maschinentyp: E200-PDJT-03-00 2. Verwendung: Zusammen mit Extruder zum Extrudieren von Schaumplatten für Expansion Abmessungen (L×B×H): 1170 × 510 × 330 mm Kopfmaterial: 40Cr Heizungsart: über Formtemperiereinheit, Wasserkreisregelung Wärmebehandlung: Härten und Anlassen, Einsatzhärten Oberflächenbehandlung: galvanisch beschichtet Strömungsführung: Geradliniger Läuferaufbau

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 930 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.028 mm, skupna širina: 1.000 mm, Tested forklift battery for your truck – 80V 6PZS 930Ah – DIN A + 1-year warranty + Includes Aquamatik (automatic filling system) + Includes end discharge cable & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol provided on delivery) + Year of manufacture: 2024 Dimensions: Length: 1,028 mm Width: 1,000 mm Height: 784 mm Weight: approx. 2,240 kg Suitable for the following models and more: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Bodpfx Akey Rnpzsrsdc Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 – side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 – side battery change Linde P 250 LWB - 5007-10 – vertical battery change Linde P 350 - 5007-10 – side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Common battery sizes available on request. Transport possible.

Stanje: rabljeno, skupna dolžina: 1.000 mm, skupna širina: 750 mm, skupna višina: 1.400 mm, Barva: Siva Lastna teža: 400 kg - Na voljo dokumentacija: Ne Bdodpfx Akoypk Ebjroc - CE certifikat: Ne - Upravljanje: Konvencionalno - Število valjev [kos]: 3 - Število pogonskih valjev [kos]: 3 - Moč [kW]: 1,5 - Premer gredi [mm]: 50 - Upornostni moment [cm³]: 6 - Premer zgornjega valja [mm]: 50 - Premer spodnjih valjev [mm]: 50 - Kapaciteta premera okrogle palice [mm]: 35 - Transportne mere: 1000mm x 750mm x 1400mm (d x š x v) - Transportna teža [kg]: 400 kg Finančne informacije DDV: Navedena cena je brez DDV DDV/diferencialna obdavčitev: DDV je odbiten za podjetja Dostava in odkup sta možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: dober (rabljeno), Hang 150 dvoglavi kovičnik za registratorje Proizvajalec: Hang Nemčija Bdodpfoy Hglasx Akrjc Stroj je bil obnovljen in je pripravljen za uporabo. Uporablja se za kovičenje vseh vrst mehanizmov z obročem. Dve kovičnični glavi z nastavljivo razdaljo. Debelina kartona: 0,2-4 mm Globina grla: 310 mm Razdalja med glavama: nastavljiva od 35 do 440 mm Ciklični čas: 0,5 s Teža: 570 kg Napajanje: 380V Cikel se zažene s stopalko.

Stanje: rabljeno, Leto izdelave: 2016, skupna dolžina: 4.400 mm, skupna širina: 1.450 mm, skupna višina: 1.300 mm, Unladen weight: 5,200 kg Price: On request - Year of manufacture: 2016 - Documentation available: Yes - Type of documentation: Electrical schematics, technical data, operating system, user manual - CE marking present: Yes - CE certificate present: No - Serial number: 210384 - Control: Conventional - Drive type: Hydraulic - Number of rolls [pcs]: 3 - Number of powered rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. pre-bending thickness [mm]: 4 - Max. working width [mm]: 3100 - Upper roll diameter [mm]: 210 - Lower roll diameter [mm]: 210 - Options: Cone bending, digital display - Transport dimensions: 4400mm x 1450mm x 1300mm (L x W x H) - Transport weight [kg]: 5200kg Bdsdeyn Aanjpfx Akrsc - Transport packages [pcs]: 1 Financial information VAT: The listed price is exclusive of VAT VAT/margin taxation: VAT reclaimable for businesses Delivery and trade-in possible at any time for all items from the industrial sector. Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2003, skupna dolžina: 3.230 mm, skupna širina: 1.150 mm, skupna višina: 1.120 mm, Barva: Siva Lastna teža: 1.400 kg Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat prisoten: Da - Serijska številka: 220281 - Upravljanje: Konvencionalno - Pogon: Mehanski - Število valjev [kos]: 3 - Število pogonskih valjev [kos]: 3 - Moč [kW]: 2,2 - Največja debelina pločevine [mm]: 2 - Največja debelina pri pred-upogibu [mm]: 2 - Največja delovna širina [mm]: 2050 Bodpox Tuy Ejfx Akrjdc - Premer zgornjega valja [mm]: 110 - Premer spodnjih valjev [mm]: 110 - Hitrost upogibanja [mm/min]: 3 - Transportne mere: 3230 mm x 1150 mm x 1120 mm (d x š x v) - Transportna teža [kg]: 1400 kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena ne vključuje DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse industrijske izdelke Lukas van Rossum

Stanje: novo, Condition: new Delivery time: approx. 14-16 weeks from order Country of origin: Turkey Price: €48,000 Leasing rate: €916.80 Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Max. beading radius: 70 mm Max. blank diameter: 4,000 mm Min. blank diameter: 550 mm Motor: 8.75 kW Length: 4,250 mm Width: 720 mm Height: 2,000 mm Weight: 2,015 kg Easy operation via mobile control panel with push buttons Manufactured according to EC safety guidelines and CE marked A set of beading rolls is included. Radius selectable. Min. diameter when cutting: 600 mm (with adapter for small diameters: 400 mm) Min. diameter when beading: 550 mm (with adapter for small diameters: 350 mm) Includes one set of cutting knives Rotational speed: 70 rpm with adjustable max. torque Upper and lower beading roll drive via planetary gear Hydraulic adjustment for processing both flat and dished parts Cutting and beading with the same head Bdjdpfxjyq Spwo Akrsc Options such as fixed and adjustable cone holders, adapters for small diameters, cutting wheels for stainless steel, or increased speed ... upon request

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Profilna valjarka Sahinler HPK 80 je težka hidravlična profilna valjarka s 3 pogonskimi valji za natančno upogibanje jeklenih profilov, cevi in kvadratnih cevi. Stroj je primeren za industrijsko uporabo v kovinski konstrukciji in strojništvu ter nudi robustno konstrukcijo z visoko zmogljivostjo upogibanja in zanesljivo ponovljivo natančnostjo. Pogonski valji: 3 Premer osi: 80 mm Bdjdjy Rrh Iepfx Akrsc Premer valja: 245 mm Moč motorja: 4,0 kW Napajanje: 400V / 3-fazno Delovna hitrost: cca 6–7 m/min Delovni položaj: možno uporabiti vodoravno in navpično

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Bsdpfeyn R E Sox Akrodc Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg Bdsdpfx Aoyb Sz Iskrsc 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Bdjdpfx Akoyb Sywerjc Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Bdjdpfx Akoyb Sydjroc Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bsdeyb Sy Repfx Akrodc Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Bedjyb Szuepfx Akrsdc Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Bdodoyb Sykopfx Akroc Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm Driven rolls: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm Flat bar flat (section / min. diameter): 120x25 mm / 600 mm; 50x mm Square steel (section / min. diameter): 50x50 mm / 800 mm; 20x20 mm Round steel (section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm Tube (section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 mm Rectangular tube upright (section / min. diameter): 80x40x3 mm / 1400 mm; 40x mm Rectangular tube square (section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm Angle steel, leg outside (section / min. diameter): 70x70x7 mm / 1000 mm; 40x mm Angle steel, leg inside (section / min. diameter): 70x70x7 mm / 1200 mm; 40x mm Bodowiq S Nepfx Akrodc Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rolls (brake motor) Hardened drive shafts Hydraulic adjustment of the top roll Hardened universal rolls Side straightening rollers in one axis, adjustable manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Bdjdpeynnhkefx Akrsc Leasing rate: €207.36 Shaft diameter: 35 mm Upper roller diameter: 137 mm Lower roller diameter: 137 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar vertical (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar horizontal (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø22 mm / 200 mm Tube (cross-section / min. diameter): Ø40x1.5 mm / 500 mm Rectangular tube vertical (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Square tube (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle steel leg outside (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle steel leg inside (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rollers (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rollers Usable both horizontally and vertically Standard roller set Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity Bdjdpeynm Eujfx Akrjc The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Bedpfeynm Enex Akrodc Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Bedpfx Akoynm Ehsrjdc Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support Bsdpfx Asynm Ebokrsdc NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations Bdodpfeynm D Rex Akrsc OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Bedpfx Aeynmzpjkrodc Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Bdedpeynmylofx Akrjc Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended