S-T Industries Merilni Sistem nakup rabljenega (117.368)

Stanje: rabljeno, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC-merilna naprava za obdelavo slik / optični merilni sistem   Proizvajalec: Mitutoyo Corporation Tip: QV-X404P1L-C Številka kode: 363-131EU Profesionalni CNC-sistem za merjenje slik za nedotakne dimenzijske meritve   Naprodaj je rabljena Mitutoyo Quick Vision Apex CNC-merilna naprava za obdelavo slik, vključno z obstojim računalniškim sistemom, dvema monitorjema, upravljalno enoto, merilno programsko opremo in obsežno dokumentacijo.   Obstojni računalniški sistem in nameščena programska oprema QVPAK se zaženeta. Vendar pa ni bilo mogoče dokončno preveriti celotne funkcije stroja in meritev.   Serija Quick Vision se uporablja za nedotakne dimenzijske meritve obdelovancev s pomočjo optičnega sistema, zajemanja slik in obdelave slik. Primerna za natančne meritve in preglede, vključno s komponentami iz elektronike, precizne mehanike in industrijske proizvodnje.   Tehnični podatki:   Proizvajalec: Mitutoyo Corporation Model: Quick Vision Apex Tip: QV-X404P1L-C Številka kode: 363-131EU Država proizvodnje: Japonska Vrsta stroja: CNC-merilna naprava za obdelavo slik   Merilno območje X / Y / Z: približno 400 × 400 × 250 mm Hjdpfx Aeztyabodxefn Načelo merjenja: nedotakna optična meritev slik CNC-krmiljeni merilni sistem   Nameščena merilna programska oprema: Mitutoyo QVPAK QVPAK (R): različica 7.502.0010 QVGEO: različica 7.502.0010 Statistika: različica 7.502.0010   Oprema:   Mitutoyo Quick Vision Apex merilna naprava Računalniško delovno mesto Fujitsu Siemens CELSIUS računalniški sistem 2 Fujitsu monitorja Tipkovnica in miška Mitutoyo upravljalna enota / ročica z gumbom za zaustavitev v sili Merilna programska oprema QVPAK Mitutoyo MCOSMOS / MiCAT medij za podatke Dokumentacija GEOPAK Dokumentacija QVPAK Druge navodila za uporabo in dokumentacija Mitutoyo Napenjalna plošča / sistem za vpenjanje obdelovancev, kot je prikazano Povezovalni kabli in dodatna oprema, kot je prikazano   Področja uporabe:   Optični nadzor dimenzij Nedotakno merjenje obdelovancev Zagotavljanje kakovosti Precizna merilna tehnika Pregled komponent in kontur Nadzor proizvodnje in procesov   Obseg dobave:   Mitutoyo Quick Vision Apex QV-X404P1L-C z računalniškim delovnim mestom, monitorji, upravljalno enoto, obstojno programsko opremo, dokumentacijo in dodatno opremo, kot je prikazano na slikah. Obseg dobave je izključno tak, kot je prikazano.   Stanje:   Rabljen / Used Optično stanje je skladno s slikami Računalniški sistem in obstojna programska oprema QVPAK se zaženeta. Obstajajo vidne sledi uporabe, ki so posledica starosti in uporabe. Na ohišju stroja so vidne poškodbe / sledi uporabe, glejte slike.   Pomembno opozorilo: Stroj ni bil preizkušen, saj je po premikanju v zaščitnem načinu. To je tudi tako predvideno s strani proizvajalca pri transportu stroja. Stroj mora strokovno osebje podjetja Mitutoyo ponovno zagnati.   Pošiljanje je možno preko špediterske službe. Pridržujemo si pravico do sprememb, napak in predhodne prodaje.   Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov merilni sistem Tesa 01110000 TESA UNIMASTER, izdelan leta 2012. Hfjdpjzqc Nmefx Adxjn Dolžina podaljševalne palice: 600 mm Dolžina podaljševalne palice: 450 mm Dolžina podaljševalne palice: 300 mm Dolžina podaljševalne palice: 150 mm Dolžina podaljševalne palice: 125 mm Dolžina podaljševalne palice: 100 mm Dolžina podaljševalne palice: 75 mm Dolžina podaljševalne palice: 50 mm Dolžina podaljševalne palice: 25 mm Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam lahko pošljete sporočilo ali nas pokličete.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Shimadzu AGS-X 10 kN univerzalni preskusni stroj z videoekstensometrom TRViewX 800D. Cena: 18.500 EUR, brez DDV, cena je predmet pogajanj. Rabljen namizni univerzalni preskusni stroj Shimadzu AGS-X, prvotno naročen pri podjetju Shimadzu leta 2022 s strani podjetja Roffelsen Plastics Slovakia. Obsežno opremljen za preskusne preizkuse na natezanje in tri-točkovno upogibanje, z dvema celicama za merjenje obremenitve, pnevmatskimi prijemali za vzorce, programsko opremo Trapezium-X in videoekstensometrom TRViewX 800D brez dotika za merjenje raztezka vzorca. Primeren za preskušanje materialov in nadzor kakovosti, ki vključuje plastiko, elastomere, trakove, vrvice in druge kompatibilne vzorce. Vključena oprema: • Preskusni okvir Shimadzu AGS-X, največja kapaciteta 10 kN. • Celici za merjenje obremenitve 10 kN in 2 kN, specificirani z razredom natančnosti 1. • Videoekstensometer TRViewX 800D. • Krmilni računalnik z 24-palčnim monitorjem in programsko opremo Trapezium-X Single. • Pnevmatski hitro zamenljivi prijemali, do 10 kN, s piramidastimi in diamantno prevlečenimi vložki. • Pnevmatski ovijalni prijemali, do 10 kN, za vzorce velikosti 0–9 mm. • Tri-točkovni upogibni nastavek, specificiran za EN ISO 178, R5, z digitalnim merjenjem premika in dodatno opremo. • Nožni pedali za nadzor prijemala, pnevmatske cevi, montažni adapterji in nastavek za poravnavo. • Namenska miza za stroj. • Mikrometer in suvereno merilo Mitutoyo s kabli za prenos podatkov; stojalo za mikrometer. Tehnične specifikacije: • Hitrost premika glave: 0,001–1.000 mm/min. • Največja hitrost povratka: 1.500 mm/min. • Širina preskusnega prostora: 425 mm. • Največji razmik med glavo in mizo: 1.200 mm brez prijemalov. • Dimenzije stroja: približno 653 × 520 × 1.603 mm, brez mize. • Teža stroja: približno 85 kg, brez mize in dodatne opreme. • Električno napajanje: enofazno 200–230 V, 50/60 Hz. • Potreben stisnjen zrak za pnevmatske prijemale. Hfsdpfxsz Rt Iro Adxon Zadnja kalibracija: Stroj se redno kalibrira. Lokacija: Ivanka pri Nitri, Slovaška. Cena ne vključuje transporta in namestitve. Pogoji za prevzem in dostavo se dogovorijo s kupcem.

Stanje: novo, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vhodna napetost: 230 V, merilno območje os X: 57 mm, merilno območje osi Y: 41 mm, merilno območje os Z: 30 mm, skupna širina: 240 mm, skupna dolžina: 330 mm, skupna višina: 720 mm, HITEC - merilna tehnika QCM 570 Razstavni stroj kot nov Letnik 2015 (NMPC 27.000,00) - za visoko natančne, ponovljive meritve kompleksnih obdelovancev - različne telecentrične leče - kamerasistem USB 3.0 / 5 megapikslov - avtomatsko prepoznavanje programov za dele M3 programska oprema: - 23″ zaslon na dotik - s prilagodljivo knjižnico sond, tolerančno in programsko funkcijo - optični prikaz rezultata (Dobro/Slabo) s prikazom trenda - CAD izvoz Merilno območje / vidno polje 57 x 42 mm Dolžinska merilna napaka 4,5 µm + L/50 (L v mm) Hfsdpjyvur Tefx Adxon Kamerasistem USB 3.0 / 5 MP Osvetlitev od zgoraj 4-segmentni LED obroč Osvetlitev od spodaj LED Nastavitev višine 30 mm Merilni sistem si je mogoče kadar koli ogledati na lokaciji v Chemnitzu.

Stanje: novo, Sheet length: 3060 mm Hfedpfx Aogickyjdxjn Sheet thickness: 4 mm Dimensions (LxWxH): 3700 x 2250 x 1400 mm Motor: 11 kW Weight approx.: 4000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel distance - Shadow line lighting - 1 backgauge rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade clearance - Ball screw - Stroke counter - Mobile foot pedal with emergency stop button - Light barrier at the rear safety guard

Stanje: rabljeno, prevoženi kilometri: 203.000 km, Leto izdelave: 2000, Leto izdelave: 2000 Črpalka: Da Cena: Na zahtevo Hodpfxsz Rkmls Adxjfn

Stanje: novo, Dolžina upogibanja: 3100, Debelina pločevine: 4, Premer zgornjega valja: 170 Standardne lastnosti: Zadnji valj z motorjem Naprava za stožčasto upogibanje Hfsdpfx Ajd Ab Nmodxen Kaljeni in polirani valji Ohišje iz jekla ST 52 Zgornji valj se po upogibanju bočno odpira za lažje odstranjevanje materiala Asimetrična zasnova za popolno upogibanje Za popoln rezultat sta zgornji in spodnji valj gnana z elektromotorjem z zavoro in planetnim zobniškim pogonom Ustreza CE-standardom Prenosna upravljalna konzola za upravljanje stroja z različnih mest OPTIONALNO EnotaKos Neto cena (€) Spodnji valji z motorjem1 1.205 € Digitalni prikazovalnik za zadnji valj1 815 € Podaljšani valji1 788 €

Stanje: novo, Sheet length: 2560 mm; Sheet thickness: 4 mm; Dimensions (LxWxH): 3200 x 2250 x 1400 mm; Motor: 7.5 kW; Weight approx.: 3500 kg Standard equipment: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front-side blade clearance adjustment - Ball screw - Cut counter Hfsdpfegickvsx Adxsn - Portable foot pedal with emergency stop button - Light barrier on rear safety devices

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Hfsdpfxowzzzfo Adxsn Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Hjdod Ab Nhopfx Adxefn Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Pressure: 20 Bending length: 900 mm Frame width: 900 mm Installation height: 325 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1760 x 1280 x 2190 mm Approx. weight: 1950 kg Motor power: 3.8 kW Electric ball screw CNC press brake KK Industries Model REVOLUTION B-Servo 900 mm x 20 t Standard equipment: Hodpfsd H Hh Dex Adxsfn KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake, KK-Industries made by DENER: Technological Advantages: Model REVOLUTION B-Servo 900 mm 20 t - High speeds with ball screw drive - The CNC servo electric press brake stands out for its high precision, accuracy, and versatile application possibilities - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B): 900 mm Bending Capacity (Pressing force): 20 tons Maximum Stroke: 150 mm Daylight Opening (Q): 325 mm Approaching Speed: 150 mm/s Bending Speed: 20 mm/s Return Speed: 150 mm/s Power: 3.8 kW Weight: 1950 kg Overall Length (A): 1760 mm Width (C): 1280 mm Height (D): 2190 mm KK-Industries GmbH There's something for everyone!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna širina: 300 mm, skupna dolžina: 300 mm, skupna višina: 150 mm, skupna masa: 10 kg, Oprema: dokumentacija / priročnik, MarSurf M400 MarSurf RD 18, Mahr, merilnik hrapavosti s procesorsko enoto. Znamka: MAHR Model: MarSurf M 300 + enota za nadzorovani premik RD18 Tip tipala: prosti tip Načelo merjenja: metoda merjenja s tipalom Tip tipala: induktivni tip Merska enota: izbira Merilni razpon: 350 µm Hfedez E Rkxopfx Adxjn Ločljivost profila: 8 nm Parametri: Ra, Rq, Rz (Ry (JIS) ustreza Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) ustreza Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Navpični grafični prikaz: samodejno/izbirno Vodoravni grafični prikaz: odvisno od meje Celotna dolžina merjenja po ISO/JIS: 1,25 mm / 4,0 mm / 12,5 mm Število n posameznih merilnih dolžin po ISO/JIS: izbirno 1-5 Hitrost tipala: 0,5 mm/s Konica tipala: 2 µm Merska sila: približno 0,7 mN - Bluetooth povezava med enoto za nadzorovani premik in prikazovalno enoto. - Merjenje v vseh smereh: vodoravno, navpično in nad glavo. - Baterija v enoti za nadzorovani premik in osrednji enoti je bila zamenjana leta 2025. - Referenčni vzorec za kalibracijo hrapavosti je vključen v enoto za nadzorovani premik. - nova merilna konica je vključena, Mahr PHT6-350. Naprava se prodaja, ker smo morali kupiti kombinirano napravo za merjenje konture in površine. Lahko se dogovorimo za ogled. Dobite ustrezno fakturo. Za tuje stranke je možna tudi izstavitev neto fakture. Pogoj je veljavna identifikacijska številka za DDV. Pridržana pravica do vmesne prodaje.

Stanje: novo, Pressure: 40 Bending length: 1300 mm Frame gap: 1300 mm Installation height: 375 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1880 x 2435 x 2320 mm Hfedpfod H Hh Hex Adxsn Weight approx.: 3400 kg Motor power: 2 x 3.8 kW electric ball screw CNC press brake KKI Model REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative of the DENER Group. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, made by DENER, offers technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t High speeds with ball screw drive The CNC servo-electric press brake stands out for its high precision, accuracy and versatile applications - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length 1550 mm Bending Capacity (Press force) 40 tons Maximum Stroke 150 mm Daylight Opening (Installation height) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Bending length: 2100 mm Hjdpfjd Ab Npex Adxefn Sheet thickness: 6 mm Upper roll diameter: 170 mm Technical data: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Dolžina pločevine: 1360 Debelina pločevine: 3 Standardna oprema: - NC krmiljenje - Programabilni motorizirani zadnji prislon z 750 mm hoda - Osvetlitev s senčno linijo - 1 kos prislonske roke z merilno lestvico - 2 kosa podpornih ročic za pločevino - 1 dodaten podporni ročaj za pločevino (pri modelih 1106-1306-1505) - Zaščita za prste - Kroglična miza (Ball Transfer Table) - Enostavna nastavitev reže za rezanje s sprednje strani - Kroglični vreteno - Števec rezov Hjdpsgick Defx Adxefn - Prenosno nožno stikalo z izrednim gumbom za zaustavitev - Svetlobna zavesa na zadnjih varovalih

Stanje: novo, Sheet length: 1100 mm Sheet thickness: 6 mm Motor: 7.5 kW Width: 2250 mm Length: 1750 mm Height: 1400 mm Standard equipment: - NC control - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle stop with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table Hfjdpfx Asgh Ndmodxsn - Knife angle easily adjustable from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear guards

Stanje: novo, Pressure: 200 Bending length: 4080 mm Distance between uprights: 4080 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5740 x 2130 x 2680 mm Weight approx.: 13,000 kg Motor power: 22 kW Hodjd Etf Aepfx Adxefn CNC crowning via control: Yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-20040 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes feature no hydraulic system and, thanks to their flexibility and reliability, represent tomorrow’s innovative technology. The increased speed and precision of this new generation of machinery deliver greater efficiency, ergonomic advantages, and environmentally friendly production processes. As the first manufacturer of servo-electric press brakes with a range of models and tonnages, Dener is a pioneer in this field – offering exceptional experience and quality. Standard Equipment: KK-Industries is the general representative for the DENER group. We have configured a high-quality model for the European market. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers the following technological advantages (Model: REVOLUTION DDM): - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full working length utilization between side frames - Reduced maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard features: - 3D color graphical control DELEM 66T with 17” touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D controller - X-axis 500 mm / R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm / R-axis stroke 250 mm for all other press brakes - No compromise on tooling: machine comes equipped with high-quality tools from EUROSTAMP, Italy - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servomotor drive on linear guides and ball screw spindle - Premium laser safety system on upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional axes on the backgauge: X1, X2, R, Z1, Z2, Delta X - ATF series 6-axis backgauge: X1, X2 - R-type and X-Prime type backgauge - Hydraulic upper and lower tool clamping - 3D touchscreen CNC control DELEM DA-69T KK-Industries GmbH

Stanje: novo, Pressure: 175 Bending length: 3570 mm Frame width: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Hodpsd Etf Djfx Adxefn Model REVOLUTION DDM-17535 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are, due to their flexibility and reliability, the technology of tomorrow. This new generation of machines offers higher speed and precision, delivering greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes in a range of models and tonnages, Dener is a pioneering force in this field, bringing extensive experience and quality. Standard equipment: KK-Industries is the general agent for the DENER group. For the European market, we have assembled a premium model. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages—Model REVOLUTION DDM: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full frame length usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphics controller Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D control - X-axis: 500 mm; R-axis: 150 mm stroke (for 1.5 m and 2 m machines) - X-axis: 750 mm; R-axis: 250 mm stroke (for all other press brakes) For the upper tool and die, we make no compromises—equipped with premium tools from EUROSTAMP Italy. - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws The quality of a machine is matched by its service. That’s why we prioritize highly qualified staff with long-standing experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2; R-Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stanje: novo, Pressure: 150 Bending length: 3050 mm Frame gap: 3050 mm Hsdpfed Etf Eex Adxofn Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 4740x2000x2680 mm Weight approx.: 9500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-15030 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new machine generation offers improved efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and capacities, Dener is a pioneer of this technology, bringing extensive experience and quality. Standard Equipment: KK-Industries holds the general agency of the DENER group. We have configured a high-quality model for Europe. The CNC servo electric press brake KK-Industries, made by DENER, includes: Technological Advantages, Model REVOLUTION DDM: The CNC servo electric press brake is characterized by high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% reduced energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Usable full frame length - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: 3D color graphics controller DELEM 66T with 17-inch touchscreen Y1, Y2, X, and R axes controlled by CNC CNC crowning via 3D control X-axis 500 mm, R-axis stroke 150 mm (for 1.5 m and 2 m models) X-axis 750 mm, R-axis stroke 250 mm (on other press brakes) We make no compromise on tooling, equipping the KKI REVOLUTION CNC servo electric press brake with quality tools from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 (V = 16, 22, 35 and 50 mm) Back gauge with servo motors on linear guide and ballscrew Of course, a machine is only as good as its service. Therefore, we focus on highly qualified staff with long-standing experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating manuals in GERMAN and ENGLISH Options: Additional controlled axes for backgauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R type backgauge X-Prime type backgauge Hydraulic upper and lower tool clamping for WILA tools CNC 3D touchscreen DELEM DA-69T control KK-Industries GmbH

Stanje: zelo dobro (rabljeno), Ponujam digitalni osciloskop Tektronix DPO 4032 Digital Phosphor Oscilloscope. Naprava je popolnoma delujoča, brez težav se vklopi in deluje pravilno. Prikaže začetni zaslon in merilni zaslon, kar potrdijo priložene fotografije. Vizualno stanje je dobro – ima normalne sledove uporabe, ki so posledica normalne uporabe. Tehnični podatki: • Proizvajalec: Tektronix • Model: DPO 4032 Hodpfx Adez Snqvoxsfn • Tip: Digitalni osciloskop • Pasovna širina: 350 MHz • Frekvenca vzorčenja: do 2,5 GS/s • 2 analognih kanalov • Barvni LCD zaslon • Vmesniki: LAN, USB Host, USB Device, VGA, CompactFlash • Napajanje: 100–240 V AC, 50–60 Hz Stanje: • Popolnoma delujoč. • Naprava se vklopi in deluje pravilno. • Prodaja se brez merilnih sond in ostale opreme. • V kompletu je samo osciloskop, kot je prikazan na fotografijah.

Stanje: novo, Bending length: 2,600 mm Sheet thickness: 6 mm Upper roll diameter: 190 mm Sheet length: 2,600 mm Technical data: - Rear roll motorized - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Upper and lower rolls driven by brake electromotors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Lower roll driven by electric motor EURO 1,925 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references! Hodpfx Adod Ab Nkoxofn

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Hfedpfx Aoxxd D Uedxsn Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A25-S5-22-48417, vhodna napetost: 230 V, skupna masa: 51 kg, Spoštovani, ponujamo v prodajo: FARO Quantum S MAX 2,5 m, leto izdelave 2022, v celoti delujoč, z veljavno kalibracijo, vključno s programsko opremo CAM2 Probing Edition z neomejeno licenco CAM2 in USB ključem, skupaj z vso pripadajočo opremo. - Doseg roke: 2,5 m - Število osi: 7 Prodaja samo podjetjem, brez garancije. Oprema: - Komplet za kalibracijo - Transportni kovček - Montažna plošča - iProbe 3 mm in 6 mm - USB kabel - Omrežni vtič 230 V - Polnilna baterija - Nosilec Mount-G3+, magnetni nosilec 150 mm - Merilna programska oprema CAM2 Probing Edition 1, neomejena licenca za CAM2 - USB ključ, licenca za enega uporabnika Hfodozxn E Nepfx Adxsn Za vsa vprašanja smo vam na voljo!

Stanje: novo, Pressure: 80 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Max. stroke length: 300 mm Hodpfxjd Etfwj Adxefn Dimensions (LxWxH): 3680 x 1960 x 2500 mm Approx. weight: 6100 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-8025 Servo Motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, offering extensive experience and high quality. Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model specifically for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers technological advantages: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter - Full length between the frames is usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment includes: - 3D color graphics control Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC controlled via the controller - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises on the upper tool and die: CNC Servo Electric Press Brake KKI REVOLUTION equipped with high-quality tools from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge controlled by servo motors on linear guides and ball screws - As with any machine, service quality is pivotal; for this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing - Laser safety device on the upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 - R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning € 2,329 - CNC crowning € 4,658 KK-Industries GmbH

Stanje: zelo dobro (rabljeno), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge, designed for non-destructive measurement of metallic and non-metallic coatings on various substrates including steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional, ready for operation • Valid PCA calibration certificate dated 05.11.2023 • Complete set in original carrying case with probe, cables, calibration standards, adapter, manual, and certificate Hedpfx Adsz Slg Roxjfn Specifications and advantages: • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive menu in Polish • Statistical functions, data recording, and export capabilities • Non-destructive measurement—ideal for quality control in production and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use Set includes: • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration standards • Measurement adapter • Original transport case • Fischer neck lanyard • User manual and PCA certificate Applications: • Quality control of coatings in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections