Rp Rp Sušilnik Lesa nakup rabljenega (14.331)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Itedpox Af Rdsfx Ab Aeg Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Ijdpfx Asdwktkeb Ajtg Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Iedpfx Abjd Dgw Us Aotg Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% Iodpfx Aod E R D Sjb Ajtg - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Longitudinal Flow Dryer – Heating with Electricity or Hot Water Internal chamber length: approx. 4,500 mm Internal chamber width: approx. 750 mm Internal chamber height: approx. 600 mm Chamber volume: 2.0 m³ Loading from above – chest design Iodjy Emqgjpfx Ab Aetg Control: manual / fully automatic Electronic control type C Longitudinal ventilation Number of fans: 1 piece Fan motor power: 0.55 kW, 400 V, 50 Hz Electric heating: 4.2 kW INCLUDED: Aluminium stacking laths Wood moisture probe Operating manual, electrical wiring diagram, etc. Space requirements: approx. 5,600 mm x 1,200 mm x 1,600 mm Weight: 400 kg Note for used machines: • Technical details are subject to change, errors excepted, and prior sale reserved. • Quoted prices are ex location – loaded free onto truck! • The machines have been cleaned and function-tested. • All machines are purchased as inspected, without any claim for warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Dimenzije mize: 1400 x 1000 mm Miza se vrti od 0 do 360 stopinj Vreteno: ISO40 Nagibno vreteno Minimalna hitrost vrtenja vretena: 90 1/min Maksimalna hitrost vrtenja vretena: 2880 1/min Višina stroja: 3260 mm Itjdpfx Ajy Iwf Hjb Aeg Dolžina stroja: 2650 mm Širina stroja: 2600 mm Teža stroja: 5100 kg Dodatna oprema, oprema: - Vgrajena rotacijska miza - Hitri pomiki - Motorizirana nastavitev višine - Strojna svetilka Stroj je v zelo dobrem stanju.

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/suhi čistilec/čistilec s trenjem tip T 1003 MA Sušilnik je opremljen z avtomatskim sistemom čiščenja sita po obodu. Premer rotorja: pribl. 900 mm Širina rotorja: pribl. 1450 mm Itsdpfx Aey Tix Aob Aeg Pogon: 75 kW

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine Iodjy Tip Uspfx Ab Aetg S klinastim jermenskim pogonom

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/suhi čistilec/čistilec s trenjem tip T 1003 MA Sušilnik je opremljen z avtomatskim sistemom čiščenja sita po obodu. Premer rotorja: pribl. 900 mm Itsdpfx Abey Tipue Aog Širina rotorja: pribl. 1450 mm Pogon: 75 kW

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Itedpfxoy Tipbs Ab Aog Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Iodpfx Aboy Th Ics Astg Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: rabljeno, Dry cleaner/friction cleaner with 110 kW drive power. Throughput up to 4 t/h, depending on type of plastic and material thickness. Iodpsy Thxhjfx Ab Ajtg

Stanje: novo, Leto izdelave: 2025, Weima enogredni drobilnik Tip: WL 4 Premer rotorja: 260 mm Širina rotorja: 600 mm Samočistilni lijak Logspaser (600x1050mm) Moč motorja: 18,5 kW Dvojna vrstica nožev z 28 kosi Teža: 1300 kg Sesalni priključek: 160 mm Vključno z vijačeno sesalno posodo. Velikost perforacije sita: 15 / 20 mm (ali po dogovoru) Iedpfx Ajxwyx Sob Aetg Skladiščni stroj takoj na voljo. Cena iz skladišča Rosenheim, brez dostave.

Stanje: rabljeno, Leto izdelave: 2010, Hladilni sušilnik za stisnjen zrak TA 5, z volumenskim pretokom do 0,60 m³/min. Hladilno sredstvo: R134a Iedpfx Ajw Tduwob Ajtg Stroj (dodatek): Sušilnik za stisnjen zrak Volumenski pretok: 600 l/min. Presežni tlak: 16 bar Moč: 0,29 kW Tok: 2,0 A Napetost: 230 V Frekvenca: 50 Hz Položaj / postavitev: prosto stoječ

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 15.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: kom 4892, Komplet sušilne opreme, vključuje: dozirni bunker, vibracijsko sito za grobi material, verižni transporter do sušilnika, tračni sušilnik, verižni transporterji iz sušilnika, vibracijski separator. Itedexa Drhepfx Ab Asg

Stanje: dober (rabljeno), Leto izdelave: 1999, Hladilni sušilnik Iedettwzbepfx Ab Astg Proizvajalec: KAESER Tip: TE 121 Leto izdelave: 1999 Nazivna moč motorja: 2,1 kW Vzdrževanje izvedeno s strani podjetja Kaeser.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik MTA DEIT165 16,50 m3/min 16 bar Itjdpfoy Nkl Njx Ab Asg Letnik izdelave: 2016

Stanje: rabljeno, Parker Hiross sušač za komprimovani vazduh za kompresorske sisteme Mehanički separator kondenzata, separator vode Hladni sušač sa vodenohlađenim naknadnim hladnjakom za uklanjanje vodene pare i hlađenje komprimovanog vazduha ili gasova. 1 komad naknadni hladnjak tip WFN009 DHH16 Protok vazduha (normalno): 540 m3/h = 9000 litara/min. Radni pritisak vazduha: max. 16 bar Dužina kućišta: 1020 mm Prečnik kućišta: Ø 105 mm Navojni priključak za vazduh: G 2" Navojni priključak za vodu: G 3/4" Težina naknadnog hladnjaka: 11 kg Isdpfx Absdzqn Ue Aetg Dimenzije naknadnog hladnjaka (D x Š x V): 1030 x 850 x 200 mm + 1 komad separator vode tip CSP 008 Protok (normalno): 480 m3/h = 8000 litara/min. Radni pritisak: max. 16 bar Navojni priključak: G 2" - Kućište filtera od aluminijuma + 1 komad mehanički separator kondenzata HIROSS SAC 120 Navojni priključci: R 1/2" Radni pritisak: 16 bar Zapremina: 0,8 litara - radi bez gubitka komprimovanog vazduha sve montirano kao što se vidi na slikama Visina montaže u stojećem položaju: 2000 mm Ukupna težina oko 40 kg

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), skupna masa: 850 kg, premer ekstrakcijske šobe: 160 mm, največja hitrost vrtenja: 85 obr/min, premer rotorja: 248 mm, Dodatni tehnični podatki Iedpow A Acajfx Ab Aetg Polnilna odprtina: 516 mm x 830 mm Premer perforirane mreže: 15 mm - 20 mm Število obojestranskih rezalnih plošč: 14 kos Zmogljivost pretoka: ca. 0,5 – 1 (odvisno od lastnosti materiala in premera perforirane mreže) Zahtevana hitrost odsesavanja: 22 m/s Nivo zvočnega tlaka: 82 dB (A) Standardna oprema Vključno z lijakom Izvedba motorja v IE2 Pogon preko jermena z dvostopenjskim priključnim reduktorjem in elastomernim dušilcem Perforacija sita 15-20 mm Vključno s cevjo za odsesavanje Rezkalni sistem ÜSS Strojna noge z dušenjem vibracij Siemens logični modul LOGO, vključno z avtomatskim obračanjem in zaustavitvijo ob prisotnosti tujka Samodejni izklop ob prostem teku stroja Upravljalni elementi in števec ur v vratih elektro omare Napetost 400 V/50 Hz 1 kos potencialno prostega kontakta za povezane dele sistema

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), skupna masa: 1.700 kg, The LR700 is a single-shaft shredder designed for a wide range of applications. Customers appreciate its compact design and universal versatility. The powerful and wear-free swing pusher, combined with the proven UNTHA cutting system, ensures reliable shredding of various wood types and quantities. Additional technical specifications: - Motor voltage: 400 V (50Hz) - Suction nozzle: 200 mm without discharge screw - Belt drive with 2-stage flange-mounted gearbox and elastomer damper - Feed opening: 700 x 1,065 mm - Hydraulic unit: 1.1 kW - Rotor speed: 98 rpm - Perforated screen: 25 mm - Cutting system: Rotor - Version: Smooth Itodpfx Aeu Iva Ieb Aeg - Number of knife rows: 1 pc - Number of cutting tools: 19 pcs - Cutting tool type: ÜSS - Rotor length: 700 mm - Rotor diameter: 300 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), skupna masa: 1.300 kg, The LR630 is a true classic among single-shaft shredders, impressing above all with its excellent price-performance ratio. It is typically used in joineries that process residual wood quantities of 1 to 7 m³ per week. The well-designed machine features a horizontal pusher. The hydraulic unit is space-savingly housed within the machine enclosure, where it is protected from dust and dirt. To safeguard your wood shredder against potential cutterhead damage, the LR630 comes equipped with an automatic foreign object detection system including automatic shutdown. Additionally, the machine features a reverse mechanism to prevent motor overload. Further technical specifications: - Motor voltage: 400 V (50Hz) - Extraction nozzle: 160 mm, without discharge screw - Belt drive with 2-stage bolt-on gearbox and elastomer damper Itodpfjy Sk Tfsx Ab Ajg - Feed opening: 624 x 792 mm - Hydraulic power: 0.75 kW - Rotor speed: 98 rpm - Screen perforation: 15-20 mm - Cutting system: Rotor - Design: Smooth - Number of knife rows: 1 pc. - Number of cutting tools: 17 pcs. - Cutting tool design: "ÜSS" - Rotor length: 630 mm - Rotor diameter: 248 mm

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K2, največja širina rezanja: 650 mm, vrsta vhodnega toka: trifazni, Oprema: varnostna svetlobna zapora, Stroj je sestavljen iz: - 5-osna rezkalna enota - Žagin set z žaginim listom premera 700 mm - Vodoravni vrtalnik za vrtanje tramov - Avtomatski sistem za označevanje montažnih referenc - Sistem za odvajanje rezil žaginega lista - Avtomatski sistem za nalaganje - Avtomatski sistem za razkladanje - Avtomatski sistem za obračanje tramov - Največje obdelovalne dimenzije 640*260*16000 mm Orodja vključena v stroju: - Univerzalni rezkar 350x100 - Diskasti rezkar 350x40 - Čelni rezkar dim. 50x200 - Čelni rezkar dim. 30x230 - Set svedrov za vrtalno enoto Iodpfx Absy Ruhdo Ajtg - Lastovičji rep za spoje tramov Na stroju je bil nedavno zamenjan računalnik, standardno vzdrževanje je bilo vedno opravljeno z originalnimi nadomestnimi deli.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 10.626 h, Funkcionalnost: popolnoma funkcionalen, Rabljen hladilni sušilnik Atlas Copco FD220VSD-G - Premium 13,20 m3/min 14 bar Iedpfx Absy Iwtds Astg Leto izdelave: 2023 Obratovalne ure: 10.626

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, moč: 150 kW (203,94 KM), nazivna toplotna moč: 250 kW (339,91 KM), ogrevalna zmogljivost: 220 kW (299,12 KM), Stacionarna lesna uplinjevalna naprava podjetja Urbas. Naprava je delujoča. Obseg vključuje motor in generator. Motor potrebuje servis. Prav tako je vključen še veljaven EEG pogodbeni dogovor o oddaji elektrike v omrežje s 21,6 centa/kWh do leta 2028. Obsežna zaloga rezervnih delov, kot so stranski kanalni puhalniki, senzorji in črpalke, je vključena. Druga naprava je priložena kot donor rezervnih delov. Itsdpoyyzv Tofx Ab Aog

Stanje: rabljeno, Rabljen avtomatski polagalec BKR Ovatta Master, širina mize 2,20 metra, skupna dolžina 10 metrov (celoten transporter). Itodpfx Absy Ddq Ij Aog