Preizkusna Naprava Za Tiskanje nakup rabljenega (86.358)

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenski rezkar s 4 glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Mere: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton Djdpfx Ajx Hwmbsplocg

Stanje: rabljeno, Plotter Alys 30, rabljen, popolnoma obnovljen s strani Lectra (glava, motor, jermeni), skupaj z rabljeno digitalizacijsko tablo. Djdpfx Ajy Ddutoplscg

Stanje: novo, Optični pripomoček za nastavljanje ničelne točke osi Z Za določanje višine v osi Z. Uporaba: Napravo se postavi na obdelovanec, nato se z mirujočim orodjem previdno približamo napravi. Ko zasveti LED-lučka, je dosežena referenčna mera 50 mm. Varnostni vzmetni hod je 2 mm. Osnovna površina Ø 54 mm Višina 50 mm Merilna površina Ø 15 mm 3 magneti v osnovi Dsdpfoym U Twox Aplecg Teža 0,35 kg

Stanje: rabljeno, Leto izdelave: 1968, Tiskarske enote 1 0 Dcodpsy N D Nzefx Apljg Maks. hitrost tiskanja pol: 4600/h Maksimalni format pola: 57 x 82 cm

Stanje: rabljeno, Leto izdelave: 1959, Tiskarske enote: 1 Dcjdey N D Nujpfx Aplog Maks. tiskalna hitrost listov: 4600/h Maks. format lista: 54 x 72 cm Št. stroja: 13865

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Dcedeyqr Sxepfx Aplsg

Stanje: rabljeno, natančni koti in poševni rezi od 0° do 46°, z digitalnim prikazom kota Lokacija: Nattheim Dcedswhzg Uspfx Apljg

Stanje: rabljeno, transportni vibracijski spiralni podajalnik / sortirni stroj / spiralni podajalnik / vibracijski podajalnik RNA vibracijska posoda, sortirna naprava / podajanje vijakov z vibracijskim podajalnikom za vijačno tehniko podajališni sistem, podajališna naprava proizvajalec: RNA Rhein-Nadel Automation GmbH tip: SRC-N 250-2L leto izdelave: ca. 2000 premer posode spodaj: 300 mm premer posode zgoraj: 350 mm notranja višina posode: ca. 25 mm širina sortirne proge: ca. 30 mm grupna višina (pogonska enota + posoda z linijo za sortiranje): 380 mm vibracijska frekvenca: 100 Hz / 6000 min-1 napajalna napetost: 230 V, 50 Hz - Podajalnik je bil uporabljen za podajanje avtomobilskih taljivih varovalk potrebna površina Ø x V: 420 x 390 mm teža: 52 kg dobro stanje Spiralni vibracijski podajalnik je sestavljen iz dveh glavnih komponent: 1) sortirna posoda, v kateri se deli usmerjajo Dodpfx Apoy N Dvbelscg 2) pogonska enota, ki z mehanskimi vibracijami povzroči premikanje delov v sortirni posodi.

Stanje: rabljeno, Ex-protected filter system, extraction unit, central cartridge pulse filter – P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Mach. No. 10011932 Year of manufacture: 2020 – as new, unused Airflow: 3,300 m³/h Airflow: 0.9 m³/sec Filter area: 20 m² (1x cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction inlet at filter entrance: 2x Ø 150 mm Exhaust outlet at filter exit: fitted with acoustic enclosure Compressed air connection: approx. 8 bar Motor power: 3 kW Electrical connection: 400 Volt, 50 Hz - Explosion-proof version, ATEX II 2Db 125°C / 3G T4 - Pneumatic rotary filter cleaning, manual activation via push button Dcsdsy N Duqspfx Aplsg - Manometer for differential pressure indication (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1x filter cartridge, Ø 325 mm, length 900 mm, P-RIES, type: cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (with acoustic enclosure) equipped with 9x activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Radial fan mounted inside at the top, type IE 3-Premium Efficiency, 12% improved efficiency - Sturdy steel construction, RAL 7035 light grey antistatic powder coated - Dust collection container: retractable drawer, approx. 70 liters (440 x 530 x 300 mm) - EC Declaration of Conformity, operating manual with electrical schematic available Required space (L x W x H): 670 x 700 x 2430 mm Weight (extraction unit): 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg Condition: as new, unused from stock

Stanje: dober (rabljeno), Soldering device for carbide-tipped saw blades VISCAT model BC500 Djdpsigv Ebefx Apljcg

Stanje: rabljeno, - 5 črkovnih tiskarskih enot - 1 lakirna enota - 6 UV sušilnikov (hlajeni z zrakom) - rotacijska izsekovalna enota - GAP Master Dsdpfxoy H U Uie Aplocg - BST video-nadzor traku Popolnoma rotacijski 355,6 mm Maks. širina traku: 340 mm Min. širina traku: 120 mm

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), MMM Uniclean® PL II 15 Single-Chamber Washer-Disinfector (As-New Condition, Year of Manufacture: 2017) Product Description (Source: MMM) High-performance single-chamber washer-disinfector for the thorough reprocessing of large quantities of medical devices such as general surgical and minimally invasive (MIC) instruments, anaesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. User Convenience - Loading baskets can be conveniently accessed from all four sides. - Easy-move rollers: Even heavy baskets can be moved effortlessly and positioned precisely inside the chamber. - Glass control panel – easy to clean. - Rubberised CoolTouch handles allow handling of hot baskets. Frame and front panel made from stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Double-glazed doors with securitised safety glass Glass panel with integrated 5.7" colour touchscreen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not external steam) Doors: Double-door Voltage: 380 – 400 V / 50 Hz Heating: Electric Machine Equipment - DI water preheating tank (Tank 1) - DI water recovery tank - Sound insulation on front (Tank 2) - Sound insulation on device front - Sound insulation on side wall - Exhaust air economiser - Air break for exhaust - Conductivity measurement system - HEPA filter monitoring - Volt-free contacts - Return sluices Site-side Media Connection - Hot water connection Dcodpfoimdtvjx Aplog Dosing System - 3 suction lances - 3rd dosing pump including accessories Roller Conveyor - Semi-automatic transport - Basic module for automatic roller conveyor - Preparation for automatic loading roller conveyor - Preparation for automatic unloading roller conveyor Batch Documentation and Machine Connectivity - Barcode reader system UPL II (wired) - Barcode reader for basket identification We do not assume any liability for the accuracy, completeness, or timeliness of the information provided.

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Dcjdpfx Aoy Dy A Toplsg Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, Bela električna naprava za Spritzkuchen Električni stroj za Spritzkuchen Model: ESFG z nosilcem za steno preverjen po DGUV V3 neprekinjeno nastavljiv priklop 230V, pripravljen za uporabo Rabljeni stroj Možnosti: Quarkbällchen (skutine kroglice) Spritzkuchen Dcodpfx Apey H Ur Ujleg Ringkrapfen / krofi (donuts)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Števec: 34.552.033 Format (cm): 36x52 Navlaževalna enota: konvencionalna navlaževalna enota Dcsdpfx Aoyrfz Asplog Oprema / dodatne informacije: z oštevilčevalno in perforacijsko enoto (N&P)

Stanje: zelo dobro (rabljeno), Števec (mio.): 98 Dcjdpfx Apsyvtntoleg Format (cm): 32x46

Leto izdelave: 2020, obratovalne ure: 50 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BV200219443, 🔥 Pirolizno čiščenje polžev – DEMO naprava | do Ø70 mm | Popolnoma avtomatska | 12 mesecev garancije Učinkovita in varna rešitev za odstranjevanje ostankov polimerov s polžev, ki se uporabljajo pri ekstruziji in brizganju – brez deformacije in brez potrebe po ročnem čiščenju. Popolnoma izdelano v Evropski uniji. _____ Dedjy Id Tqjpfx Aplecg Ključne značilnosti • Primerno za vse termoplastične materiale • Največji premer polža: Ø70 mm • Vertikalni proces – brez deformacije polža • Popolnoma avtomatsko delovanje (ni potreben operater) • Čas čiščenja: 3–8 ur (odvisno od stopnje onesnaženja) • Procesna temperatura: 400–500 °C • Integriran sistem za obdelavo plinov z vodnim rezervoarjem in črpalko _____ Tehnični podatki (tip PC-70) • Največji premer polža: 70 mm • Največja dolžina polža: 2.450 mm • Največja delovna višina: 3.200 mm • Skupna priključna moč: 25 kW _____ Stanje • DEMO naprava – neposredno od proizvajalca • Odlično stanje s 12-mesečno tovarniško garancijo • Takoj dobavljivo FCA BOCO cena: 27.990,- EUR brez DDV _____ Proizvajalec BOCO Pardubice Machines, s.r.o. (Češka republika) Več kot 30 let izkušenj na področju tehnologije predelave plastike

Stanje: zelo dobro (rabljeno), Prodajam profesionalno napravo za nastavitev batnih merilcev SUBITO – Schwenk ESU. Zelo dobro ohranjena, komplet v originalnem lesenem kovčku z navodili. • Model: SUBITO Einstellgerät ESU • Proizvajalec: Oskar Schwenk GmbH, Nemčija • Popolna oprema • Stabilno litoželezno ogrodje • Natančna nastavitev in mikrometrično pomikanje • Idealno za nastavitev batnih merilcev SUBITO, ESS, ESU • Vse skupaj kot novo. Dcodpjx A Ia Iofx Aplog

Stanje: zelo dobro (rabljeno), Manual punching press FDI, Fredrich GmbH. Very good condition. Dcjdpfsum H Edex Aplog

Stanje: dober (rabljeno), Mirus sheet feeder printing machine, in working condition. Dsdpfx Aoud Awveplecg

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz Dcodeym Unzepfx Aplog - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: dober (rabljeno), Leto izdelave: 1994, For sale: Tampoflex Jumbo 150-400 pad printing machine, year of manufacture 1994. Fully operational and in good condition. Dedpfx Apev Eqatjljcg

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek Dcodpexn Ax Ajfx Apleg • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: zelo dobro (rabljeno), Device for precise setting, measurement, and inspection of CNC cutting tools. System equipped with EZset optical camera and EZvision software (Image Controller 1). In very good condition, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axis: up to 400 mm • Camera with image processing system • Tool edge, length, and diameter measuring functions • Data saving and printout capability • USB and RS ports Dsdpsxn Awxsfx Apljcg • Power supply: 12 V DC, 40 VA • Year of manufacture approx. 2018–2019 • Complete with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal / transverse axes reference properly • Well-maintained unit from a German tooling facility Functional description: PRECIsset 400 enables fast and repeatable setup of tools before CNC machining. The EZset vision system allows for blade geometry analysis and tool wear monitoring. High measurement accuracy is ensured by a stable column and industrial-grade optics.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: ZY30124, Technology: UV Print&Cut InkJet LED Printing Technology: Piezoelectric Inkjet Printer Media: Width from 182 to 762 mm Thickness: Maximum 1.0 mm including backing paper (during printing), Maximum 0.4 mm with backing paper and 0.22 mm without backing paper (during cutting) Maximum Outer Roll Diameter: 180 mm Roll Weight: Up to 20 kg Inner Core Diameter: 50.8 mm or 76.2 mm Print/Cut Width: Maximum 736 mm Ink Cartridges: Type: Roland ECO-UV / ECO-UV S Capacity: 220 cm³, 500 cm³ Colors: ECO-UV: Six colors (Cyan, Magenta, Yellow, Black, White, and Gloss) / ECO-UV S: Five colors (Cyan, Magenta, Yellow, Black, White) Ink Curing Unit: Dual UV LED Lamp Print Resolution (dots per inch / dpi): Up to 1440 dpi Cutting Speed: 10-600 mm/s (10-300 mm/s in media feed direction) Cutting Force: 30-300 gf Blade Offset: 0.000 to 1.500 mm Software Resolution (for cutting): 0.025 mm/step Dcsdpfx Apevf Icroleg