Perlmühle Drais Mlin S Kroglicami Drais Pm 25 Rl-V nakup rabljenega (103.083)

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Dedpfx Acew R Rt Io Nech Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 t Drawbar pull: 25 t Maximum lift: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Djdpolwvm Ajfx Ac Njch Power supply: 380 Volt / 50 Hz Accessories / Special equipment: - Tilting table Note: The machine is connected to power in our warehouse and can be inspected.

Stanje: rabljeno, Geared motor, electric motor, electric geared motor -Speed: 8/77 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 44 -Brake: 220 V Dcsdpfx Ajct Er Ejc Neh -Price: per unit -Quantity: 1 available -Dimensions: 590/200/H270 mm -Weight: 36 kg

Stanje: pripravljen za uporabo (rabljen), Siemens 6FC5356-0BB14-0AA0 NCU 561.4 SN:ST-V22037257, artikel je bil generalno obnovljen in ima 3 mesece garancije, rabljen, z običajnimi sledovi uporabe, 100% delujoč, dobava v skladu s fotografijami. Dcodpfx Asi Ed Ebjc Neh

Stanje: pripravljen za uporabo (rabljen), Bosch SD-B5.250.015-10.000 Brushless Servo Motor SN, one connector with damage that does not affect functionality. Professionally completely overhauled and tested with a 12-month warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please enquire for price separately! IMPORTANT: Please enquire separately for costs of packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Dcodpjvmu H Tofx Ac Nsh

Stanje: pripravljen za uporabo (rabljen), Allen Bradley 1326AB-B530E-21 servomotor, serija C, SN:R517258, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100% brezhiben, obseg dobave po slikah. Za ta izdelek dogovorjeni prodajni popusti ne veljajo. Prosimo, povprašajte za ceno posebej! Djdpfetkgn Ejx Ac Noch

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni nosilec orodja GARANT SK40-6-50 za natančno vpenjanje orodij Ø6 mm. Izdelek priznane blagovne znamke Hoffmann Group / Garant – Nemčija, uporabljen v CNC obdelovalnih centrih. • Tip vpenjanja: SK40 (DIN 69871) • Velikost: Ø6 mm • Dolžina: 50 mm • Kataloška številka: 300210.6 • Uravnoteženje: G2.5 do 25.000 obr/min • Visoka natančnost, stabilno vpenjanje • Idealno za VHM rezkarje in svedre ter precizna orodja • Zelo dobro stanje – preverjeno, pripravljeno za delo. Nosilci GARANT so najvišji razred v vpenjalni tehniki – jamstvo za kakovost in trajnost. -- CENA NAVEDENA ZA 1 KOS -- Dodsw Syzwjpfx Ac Nsch

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer priznane znamke Mahr, namenjen natančnim meritvam v industriji, delavnici in laboratoriju. Naprava se odlikuje z visoko natančnostjo ter robustno izdelavo, velik LCD zaslon pa omogoča hiter in enostaven odčitek rezultatov. . Merilno območje: 25–50 mm / 1–2” . Ločljivost: 0,001 mm (1 µm) . Funkcije: ZERO, ABS, REL, TOL . Razred zaščite: IP65 – odpornost na prah in brizganje vode . Napajanje: baterija CR2032 (3 V) . Ergonomična, natančna konstrukcija iz kaljenega jekla . Pregleden LCD zaslon . Kataloška številka: 4157042 . Proizvajalec: Mahr GmbH – Nemčija V kompletu: . Digitalni mikrometer Mahr Micromar 40 EWR-S . Merilni standard . Nastavitveni ključ . Dokumentacija in navodila za uporabo . Originalen transportni kovček Stanje naprave: zelo dobro – popolnoma tehnično brezhibna in pripravljena na uporabo. Odlična izbira za industrijske obrate, precizne delavnice in merilne laboratorije. Dcsdpfx Acexl Rf Se Noh

Stanje: zelo dobro (rabljeno), Professional industrial robot from the renowned manufacturer SHINI, designed for automating production processes—primarily for removing parts from injection moulds and for component handling. The device is used in the plastics industry (injection moulding machines), providing fast and repeatable work cycles to increase production efficiency. The robot is equipped with a hand-held controller (teach pendant) for programming movements, as well as automatic mode operation. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload/application: robot for light-duty applications (moulded parts) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual + AUTO mode operation • Complete wiring set • Weight: approx. 62 kg Equipment: • SHINI robot • Hand-held controller (programmer) • Pneumatic gripper • Cables and installation • Documentation (visible in the photos) Condition: Used – normal signs of wear. Technically fully functional and ready for operation. Additional information: • Sold exactly as shown in the photos • Possibility to inspect before purchase Dsdpjy Duzqofx Ac Noch • Pallet shipping available Applications: • Plastic injection moulding machines • Production automation • Part removal • Pick & place

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 159879, 🔥 ANUNȚ PREMIUM – FISCHER MFV-1224/50 ELECTROMANDRINĂ DE MARE VITEZĂ 🔥 50.000 RPM | HSK-C32 | STARE EXCELENTĂ | GATA PENTRU PRODUCȚIE Electromandrină high-end FISCHER MFV-1224 disponibilă spre vânzare – soluție premium pentru rectificare de precizie și prelucrare CNC cu turații foarte mari. Ideală pentru medii industriale exigente, unde precizia și fiabilitatea sunt esențiale. ⸻ ⚙️ Specificații principale • Model: FISCHER MFV-1224/50 • Turație maximă: 50.000 rpm Dodpfjy Hpbwjx Ac Njch • Prindere sculă: HSK-C32 (schimbare automată) • Tip: electromandrină de înaltă frecvență • Proiectată pentru aplicații de mare precizie și viteză ridicată ⸻ ✅ Stare & Performanță • Testată și verificată profesional • Funcționare excelentă – operare lină • Fără zgomote sau vibrații atipice • Mandrina este pregătită pentru instalare imediată • Fără coliziuni, fără defecte ascunse ⸻ 🎯 Aplicații uzuale • Rectificare internă și externă • Frezare de mare viteză • Prelucrări de precizie (aerospațial, matrițe, scule) ⸻ 📦 Include • Unitate completă de mandrină (exact ca în poze) • Ambalată cu atenție pentru transport sigur ⸻ 💎 De ce această mandrină? • Calitate premium de inginerie elvețiană/germană • Fiabilitate ridicată la turații extreme • Raport valoare/preț excelent față de nou (economisești mii de euro) ⸻ 💰 Preț: [5.000€ – negociabil] 📍 Localizare: România 🌍 Livrare internațională disponibilă ⸻ 📹 Extra • Video de funcționare la cerere • Fotografii și detalii tehnice suplimentare disponibile ⸻ 📩 Doar pentru cereri serioase. Gata de expediere – tranzacție rapidă preferată.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 30 h, Oprema: centralizirani mazalni sistem, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Tube Laser Cutting System – The Ideal Entry-Level Solution. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for craft businesses, metal fabricators, and more, this laser is designed for those looking to take their first steps into tube laser processing. It offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your manufacturing process with precise cuts and user-friendly technology—adding true value to your business. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Max. tube diameter: Ø250 mm - Max. square profile dimensions: 160x160 mm - Max. rectangular profile dimensions: 200x150 mm - Min. tube diameter: 16 mm - Max. material length: 6000 mm - Min. remnant length: 65 mm - Discharge length: 3000 mm - Semi-automatic unloading unit: Optional (6 m) - Max. material weight: 58 kg/m - Max. total workpiece weight: 350 kg - Supported profile types: round, square, rectangular, elliptical - Open section types: I, C, L - Max. open section dimensions: 240x240 mm Dynamics: - X-axis: 40 m/min - Y-axis: 94 m/min - Z-axis: 30 m/min - A-axis: 510°/s Dsdperkntcjfx Ac Nech Accuracy: - Positioning accuracy: ±0.2 mm - Positioning repeatability: ±0.05 mm - Tube center detection with capacitive sensor: Yes Available Configuration Options: LASER POWER OPTIONS: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head ADDITIONAL OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar air) - CNC bevel cutting head (+/- 45°) - Semi-automatic front loading system - Discharge table (6 m) with conveyor belt - Discharge table (3 m) with conveyor belt - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud license + D-Mobile + Smart Watch - STEP importer

Stanje: rabljeno, Used Drais dissolver (Germany), model RN 3-45 AS VAC. Product-contact components are made of magnetic stainless steel (ferritic steel). The machine is designed for vacuum operation. The mixer features a single shaft with a working length of 105 cm, equipped with a toothed disc with a diameter of 690 mm. The shaft is driven by an electric motor with a power of 45 kW, 1460 rpm, 400/690 V, 50 Hz. Operating shaft speed up to approximately 600 rpm. The mixer is equipped with a side wall scraper driven by a gearbox and an electric motor with a power of 1.5 kW, 1410 rpm, 440 V, 50 Hz. Scraper operating speed up to 26 rpm. The machine comes with a top cover and a vessel with a total capacity of 2000 l. Internal vessel dimensions: diameter 1465 mm x straight side wall height 1160 mm. The vessel has two bottom discharge outlets, each located at the sidewall, equipped with valves, and is mounted on two lower rails for forklift handling. The dissolver is hydraulically lifted/lowered. Lifting range approx. 145 cm. Hydraulic drive powered by an electric motor with a power of 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Included is a Tepro (Poland) vacuum pump and a control panel. The machine was last used in the chemical industry. Dcjdpsykn U Nsfx Ac Noh

Stanje: zelo dobro (rabljeno), For sale: Professional METZ TS 8/8 fire pump, manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The unit is in very good visual and technical condition, sourced from a fire brigade. The pump is equipped with a Volkswagen type 122 engine, delivering 25 kW, renowned for its excellent durability and ease of maintenance. A big advantage is the low operating hours – approximately 66 engine hours, which is very low for equipment of this type. Technical data: • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of production: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump performance: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment: • Pressure and vacuum gauge • Engine hour counter • Work lighting • Fire brigade quick couplings • Transport frame • Manual choke and throttle control Applications: • Volunteer fire brigades / fire departments • Pumping water from ponds, rivers, and wells • Agricultural operations • Fire protection systems • Dewatering and water handling tasks Dcodpfx Asyt H R Usc Noh Robust German construction – highly durable and easy to service.

Stanje: novo, moč: 310 kW (421,48 KM), vrsta goriva: dizel, lastna masa: 8.636 kg, največja dovoljena obremenitev: 17.364 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.150 mm, zavore: zaviranje z motorjem, barva: srebrn, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, spojka prikolice, tempomat, zapora diferenciala, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Aluminum cab, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, rotating beacon, leaf-air suspension, towing hitch air+electrics, aluminum fuel tank, 2nd axle liftable, 2nd axle with steered leading axle, underrun protection, roof hatch, green environmental badge Wheelbase: 3,150 mm, 8t front axle, rear axle crown wheel 485 hypoid 13t, 7.5t steered/liftable/relieving leading axle, electronic brake system with ABS and ASR, disc brakes with partial protection on front and rear axles, electronic parking brake, additional parking brake on front axle, condensate monitoring for compressed air system, front axle stabilizer, aluminum front underrun protection, smoker’s package, seat belt monitoring, lower bunk, residual heat utilization, auxiliary hot water heater, additional heat insulation, PSM 2nd generation, traction assist, ClassicSpace, comfort locking system, light sensor, rain sensor, Mercedes PowerShift 3, PowerShift Advanced, driving program economy/power, navigation system, axle load measuring system, Multimedia Cockpit Interactive, Remote Online, Remote Connect, pre-installed for toll recording, LED daytime running lights, high performance engine brake, cyclone pre-filter for coarse dust, transmission oil cooling, ESP, lane keeping assistant, attention assistant, traffic sign assistant, Active Brake Assist 5, PTO MB 131-2c pump. Djdpfsx Ury Ssx Ac Njch Frame length approx. 5,400 mm! Frame height approx. 1,140 mm! New vehicle from stock with registration dated 16.12.2025! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 32.850 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Oprema: ABS, New vehicle! Available for purchase, rental, or lease with purchase option upon request! New Meiller 25m³ steel round tipper with electric sliding cover and pendulum tailgate – TPMS tire pressure monitoring system --- * Manufacturer: Meiller * Model: MHPS44/3N * First registration: – (NEW VEHICLE) * Gross weight according to manufacturer: 39,000 kg * Unladen weight according to manufacturer: 6,100 kg * Volume: approx. 25m³ (approx. 7.6 m length x 2.3 m width x 1.5 m height) * Axles: 3x BPW axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 S-profile NEW * Suspension: Air suspension with lift/lower function * TIRE PRESSURE MONITORING SYSTEM mandatory from 01.07.2024 * Colour: Body + tarp RAL 9006 White aluminium, chassis RAL 7021 Black grey * ABS / EBS * Pendulum tailgate with side toggle locks and rear wall seal * Access step inside front left of body * Angled body corners at front for improved material discharge Dcodpfxov Iipxs Ac Neh * 5/6 mm floor * 4 mm side walls * 4 mm front wall * 4 mm rear wall * Chassis frame welded construction made from high-strength fine-grain steel * Saddle height unladen 1,247 mm * Saddle height laden 1,217 mm * Electric Meiller sliding tarp with radio remote control including aluminium ladder front left * Individual mudguards * Collapsible support legs * Aluminium air tank * Document pocket on front wall * ECAS with automatic lowering during tipping * TPMS tire pressure monitoring system * Foldable underrun protection * Additional LED reversing light New vehicle! Available for purchase, rental, or lease with purchase option upon request! Notice regarding potential errors in the listing: Despite careful preparation of this advertisement, errors in the text or specifications may occur. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or if you have any questions.

Stanje: rabljeno, prevoženi kilometri: 100 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, barva: srebrn, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, skupna dolžina: 6.200 mm, skupna širina: 2.070 mm, skupna višina: 2.480 mm, dovoljena osna obremenitev (os 1): 1.850 kg, dovoljena osna obremenitev (os 2): 2.100 kg, Leto izdelave: 2024, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, tempomat, Splošne informacije Število vrat: 3 Letnik: 2024 Tehnične informacije Število valjev: 4 Prostornina motorja: 2.299 ccm Največja obremenitev sprednje osi: 1.850 kg Največja obremenitev zadnje osi: 2.100 kg Teže Lastna teža: 2.043 kg Nosilnost: 1.457 kg Dovoljena skupna masa: 3.500 kg Dcsdpfxjykal Te Ac Neh Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 12.2027 Poškodbe: nobene Finančne informacije Cena: Na zahtevo DDV/maržna obdavčitev: DDV je odbiten = Dodatne možnosti in oprema = - Airbag - Alarmni sistem razreda 1 - Prikaz zunanje temperature - Dvosed na sovoznikovi strani - Zatemnjena stekla - LED osvetlitev tovornega prostora - Sredinski naslon za roke spredaj - Radio/USB/Aux - Kamera za vzvratno vožnjo - Stranska vrata - Stranske zaščitne letve - Imobilizator - Stopnica za vstop - Dva zadnja vrata z odpiranjem do 270° = Opombe = Popolnoma izdelan tovorni prostor s drsnimi vrati iz kabine v tovorni prostor. Polica/regal.

Stanje: rabljeno, prevoženi kilometri: 263.822 km, moč: 188 kW (255,61 KM), prva registracija: 11/2011, vrsta goriva: dizel, velikost pnevmatike: 315 / 80 / R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.300 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 6, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 3, skupna dolžina: 8.500 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 7.500 kg, dovoljena osna obremenitev (os 3): 11.500 kg, Leto izdelave: 2011, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, tempomat, zapora diferenciala, General Information Model Code: ### Technical Details Number of cylinders: 6 Engine displacement: 9,186 cc Transmission Transmission: Allison, 6-speed, automatic Axle Configuration Tyre size: 315 / 80 / R22.5 Axle brand: DAF Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: Leaf suspension Rear axle 1: Max. axle load: 7,500 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: Air suspension Rear axle 2: Twin tyres; Differential lock; Max. axle load: 11,500 kg; Inner left tyre tread: 30%; Outer left tyre tread: 30%; Inner right tyre tread: 30%; Outer right tyre tread: 30%; Suspension: Air suspension Weights Curb weight: 14,100 kg Payload: 12,400 kg Gross vehicle weight (GVW): 26,500 kg Functional Superstructure brand: Geesink GPM3 17H25 Pump: Yes Interior Interior: grey Maintenance APK (General inspection): valid until 11.2026 History Number of owners: 1 Condition General condition: average Technical condition: average Optical condition: average Number of keys: 2 Product Safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12-volt socket - Car kit - Luggage compartment cover - Low noise - Speed limiter Djdpfxjy H Arco Ac Noch - Particulate filter - Radio/CD player - Reversing camera - Sun visor - Stability control - PTO (power take-off)

Stanje: rabljeno, prevoženi kilometri: 150 km, moč: 100 kW (135,96 KM), prva registracija: 11/2024, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, skupna dolžina: 6.200 mm, skupna širina: 2.070 mm, skupna višina: 2.480 mm, dovoljena osna obremenitev (os 1): 1.850 kg, dovoljena osna obremenitev (os 2): 2.100 kg, Leto izdelave: 2024, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, tempomat, Informaciones técnicas Número de cilindros: 4 Cilindrada del motor: 2.299 cc Carga máxima eje delantero: 1.850 kg Carga máxima eje trasero: 2.100 kg Pesos Peso en vacío: 2.043 kg Carga útil: 1.457 kg Peso máximo autorizado (MMA): 3.500 kg Funcional Carrocería marca: Xarios Mantenimiento ITV (Inspección Técnica): Válida hasta 11/2027 Información financiera IVA/requiere factura: IVA deducible Identificación Matrícula: VZH-43-H = Otras opciones y equipamiento = - Airbag - Sistema de alarma clase 1 - Indicador de temperatura exterior - Banqueta para acompañante - Cristales tintados - Iluminación LED - Apoyabrazos delantero central - Radio/CD/USB - Cámara de marcha atrás - Barras laterales - Inmovilizador = Observaciones = Dcsdpfsy Dfd Asx Ac Njh Red Edition Carrier Xarios Refrigeración/Congelación/Calefacción Toma exterior día y noche Conexión de 220 voltios L3/H2 LxAnxAl 355x172x160 Marca del equipo de frío: Carrier

Stanje: dober (rabljeno), prevoženi kilometri: 460.341 km, prva registracija: 09/1997, vrsta goriva: dizel, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 4x2, medosna razdalja: 3.600 mm, gorivo: dizel, zavore: retarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 13.000 kg, Leto izdelave: 1997, Oprema: ABS, centralno zaklepanje, električno upravljanje oken, klimatska naprava, meglenke, parkirni grelec, retarder, spojler, tempomat, = Additional Options and Equipment = - Aluminum fuel tank Dedpeuxyc Ujfx Ac Nsch - Leaf spring suspension - Roof spoiler - High beam headlights - Air suspension - Sleeper cab - Sun visor - Parking heater = Remarks = Scania R143.500 4x2 Streamline - Retarder - Leather - Alloy wheels - Custom bumper - Airhorns - Lightbar Model year: 12-09-1997 Mileage: 460,341 km VIN: YS2RA4X2A01182529 Clean 143 Streamline Leather - custom interior Retarder Manual gearbox Air conditioning Differential lock PTO Airhorns Lightbar Visit our website for all photos and information: = Further Information = Transmission: Scania, manual gearbox Tyre size: 315/80R22.5 Front axle: Max. axle load: 7,500 kg; Steered; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: leaf springs Rear axle: Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70%; Suspension: air suspension Number of cylinders: 8 gross vehicle weight: 20,500 kg Body manufacturer: Scania Technical condition: Good Visual condition: Good

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 24.769 h, nosilnost: 2.500 kg, dvižna višina: 5.700 mm, prosto dvigovanje: 1.600 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.640 mm, širina nosilnega okvirja vilic: 1.500 mm, dolžina vilic: 1.160 mm, lastna masa: 6.038 kg, skupna dolžina: 3.280 mm, vrsta pogona: Elektro, gradbena širina: 1.950 mm, Four-way side loader Load center: 590 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 620Ah Battery year: 2015 Description: In addition to this Baumann model, we also have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used vehicle directly, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this EVS25/12-11.8/57 TR LK. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for commission sale at our premises. Dodjwdknmspfx Ac Njch Fork positioner Full free lift Platform height: 360 mm

Stanje: zelo dobro (rabljeno), Dissolver Drais RSV 19.1 Dedpfx Acsx Rwtco Nsch Moč 14,5 kW Območje vrtljajev 0-1850 1/min Popolnoma opremljen z nadzorno omaro V zelo dobrem stanju, pripravljen za uporabo, neposredno iz proizvodnje!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 6 kW (8,16 KM), vrsta prenosa: hidrostat, vrsta goriva: bencin, barva: modra, Stroj za talno označevanje: + Graco + LineLazer IV 250SPS + Rezervoar za barvo / posoda za kroglice + Vzporedno brizganje: 2x brizgalka / 2 trosilci kroglic + Ročna brizgalka Dsdpfx Aew Svqzoc Nsch + Hidravlični pogon, samohoden naprej / nazaj + Airless črpalka + Motor Honda GX 270, 8,4 KM Vsa novo dodana vozila prejemajte po e-pošti – prijavite se na naš NEWSLETTER! Možne napake in pravica do vmesne prodaje pridržana!

Stanje: rabljeno, prevoženi kilometri: 100 km, moč: 100 kW (135,96 KM), vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, število prestav: 6, emisijski razred: Euro 6, število sedežev: 2, skupna dolžina: 6.200 mm, skupna širina: 2.070 mm, skupna višina: 2.480 mm, dovoljena osna obremenitev (os 1): 1.850 kg, dovoljena osna obremenitev (os 2): 2.100 kg, Leto izdelave: 2024, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, tempomat, Všeobecné informace Počet dveří: 3 Rok výroby: 2024 Technické informace Počet válců: 4 Objem motoru: 2 299 cm³ Dedpfx Ajyi Dvaec Njch Maximální zatížení přední nápravy: 1 850 kg Maximální zatížení zadní nápravy: 2 100 kg Hmotnosti Provozní hmotnost: 2 043 kg Užitečné zatížení: 1 457 kg Celková povolená hmotnost: 3 500 kg Údržba STK (Technická kontrola): platná do 12.2027 Finanční informace DPH/Rozdílové zdanění: Odpočitatelná DPH = Další možnosti a vybavení = - Airbag - Alarm třídy 1 - Venkovní teploměr - Dvojlavice u spolujezdce - Tónovaná skla - LED osvětlení nákladového prostoru - Přední středová loketní opěrka - Rádio - Rádio/USB/Aux - Couvací kamera - Boční dveře - Boční lišty (Side-Bars) - Imobilizér - Nástupní stupeň - Dvoukřídlé zadní dveře otočné o 270° = Poznámky = Nákladový prostor kompletně upravený s posuvnými dveřmi do nákladového prostoru + policový systém.

Stanje: pripravljen za uporabo (rabljen), Indramat KDV 2.3-100-220 / 300-000 Napajalnik, SN: 248468-02566, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč. Obseg dobave skladno s fotografijami. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Prosimo, za ceno povprašajte posebej! Dcedpfex Etyhjx Ac Neh

Stanje: pripravljen za uporabo (rabljen), Heidenhain UVR 130D pretvornik Id. 377 639-01 SN25616462H, izdelek je bil generalno obnovljen in ima 3-mesečno garancijo, rabljen, v dobrem stanju, 100% delujoč, obseg dobave v skladu s fotografijami. Dcjdpfxox Etrqj Ac Njh