Orodni Stolpi nakup rabljenega (319)

Stanje: dober (rabljeno), 1 x univerzalni stružni stroj Macmon Njdpfx Ast Sdaiokqeda M 100 v odličnem stanju, iz strokovne šole. Tehnični podatki in dodatne fotografije bodo objavljeni kmalu. Stroj si lahko ogledate v delovanju.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, FLOW & THERMAL Regenerativni termični oksidator (RTO), 18.000 Nm³/h (2021) Celoten industrijski sistem za obdelavo procesne vode, ki vsebuje hlapne organske spojine (VOC), sestavljen iz destilacijskih stolpov in trikomornega regenerativnega termičnega oksidatorja. Opremo je izdelalo podjetje Flow & Thermal Solutions / TECAM leta 2021, namestili pa so jo v obratu za proizvodnjo PET-a, kjer je bila v uporabi do zaprtja tovarne 27. novembra 2025. Sistem odstranjuje VOC iz vode s pomočjo zračnega odplavljanja in jih nato uniči v RTO s termično oksidacijo pri visoki temperaturi. Povračilo toplote s pomočjo keramičnega materiala pomaga zmanjšati porabo zemeljskega plina. Glavne značilnosti Njdpfx Akozvckneqsda • Proizvajalec: Flow & Thermal Solutions / TECAM • Leto: 2021 • Serijska številka: F002 • Nazivna kapaciteta RTO: 18.000 Nm³/h • Konfiguracija: trikomorni regenerativni RTO • Gorivo: zemeljski plin • Gorilnik Honeywell / Eclipse TJ 200 • Izkoristek gorilnika: 58–586 kW • Električno napajanje: 400 V, 50 Hz • Električna moč, navedena na tipski tablici: 40 kW • Glavni ventilator Soler & Palau ATEX, 30 kW • Avtomatizacija Siemens PLC s zaslonom na dotik (HMI) • Sistemi za spremljanje spodnje eksplozivne meje (LEL), izpiranje, razredčevanje, obvod in pnevmatski ventili • Vertikalni dimnik: 10 m visok, premer: 800 mm • Označen s CE Učinkovitost in delovanje Oprema je delovala pri dejanskih pretokih, ki so bili blizu njene nazivne kapacitete, pri čemer so zabeležene vrednosti znašale približno od 16.400 do 17.900 Nm³/h. Zadnja razpoložljiva analiza emisij, ki jo je izvedla družba DEKRA decembra 2023, je pokazala naslednje vrednosti: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ Med preizkusom je oprema delovala pri približni temperaturi 775–780 °C, pri pretoku obdelane vode 3,5 m³/h. Destilacijski stolpi Sistem vključuje: • Izvirni destilacijski stolp, zasnovan za približno 6 m³/h. • Drugi destilacijski stolp Tecnium SLFKK9, izdelan iz PPH, z nazivno kapaciteto 8 m³/h in maksimalno kapaciteto 10 m³/h. Drugi stolp je bil nameščen, vendar je trenutno razstavljen in leži na tleh, potem ko ga je med zimo podrl močan veter. Ima luknjo na dnu, ki je glede na razpoložljive informacije potencialno popravljiva. Stolp Tecnium je opremljen z notranjo polnilno maso, razdelilniki, odstranjevalcem kapljic, priključki, odtokom in možnostmi za integracijo z obstoječim sistemom za nadzor. Stanje in vzdrževanje Sistem je deloval do dokončnega zaprtja obrata novembra 2025. Zadnje preventivno vzdrževanje je izvedlo podjetje TECAM junija 2025, vključevalo pa je mehanski in električni pregled, gorilnik, ventilatorje, destilacijske stolpe, instrumentacijo, ventile in funkcionalno testiranje. Oprema je bila delujoča, vendar je pred ponovnim zagonom potrebno izvesti vzdrževalna dela, predvsem na naslednjih komponentah: • Procesni ventili • Notranja izolacija stolpov • Kanali in tesnila • Impeler glavnega ventilatorja in kompenzacijski spoje • Popravilo dna drugega destilacijskega stolpa Tehnična dokumentacija podjetja TECAM je na voljo glede priporočenih del, na voljo pa je tudi več rezervnih delov. Obseg dobave Sistem vključuje: • Trikomorni RTO • Komora za zgorevanje • Gorilnik in sistem za dovod plina • Glavni ventilator • Dva destilacijska stolpa • Sistem za razredčevanje in izpiranje • Topli obvod • Analizatorji spodnje eksplozivne meje (LEL) • Dimnik • Kanali • Električne omare in nadzorne plošče • Platforme, lestve in podporne konstrukcije • Na voljo rezervni deli

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Emco C40 Linear with Digital Readout and Contour Control – Excellent Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2008 Machine No.: BA1DW2501 >> Milling Table Clamping Surface: 800 x 400 mm Clamping Slots: 8 Slot Width: 14 H8 Slot Spacing: 50 mm Max. Table Load: 300 kg >> Infinitely Variable Spindle Speeds: 10–5,000 rpm >> Infinitely Variable Feed Rate: 10–2,000 mm/min Nodpfswxxdfox Akqjda Rapid Traverse X-axis: 5,000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and Horizontal Quill – SK40 >> Hydraulic Tool Clamping System >> Quill Stroke: 80 mm >> Weight: approx. 2,000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main Drive Motor: 7 kW >> Spindle Brake >> Technical Documentation, Spare Parts Diagrams, Operating Manual >> Swiveling Enclosure >> Coolant System >> Machine Lamp >> Indexing Head with Tailstock >> Steady Rest >> Röhm Machine Vise About the machine: For sale is a Universal Milling Machine Emco C40 Linear with contour control. This universal milling machine is in almost new condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Converting from vertical to horizontal milling is straightforward thanks to the pivotable vertical head. The Emco has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power on our premises.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: Ndodpovbifgefx Akqsa For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 Nedeu Nvwvspfx Akqoda - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table Nedpfx Ast Aav Iskqoda >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Nedpfjxghtvex Akqoda Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Ndedpfx Aou Racrskqoa Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display Njdpfsu T D Nrex Akqeda >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site. Ndedpfx Ajvb Ud Uskqoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite. Njdot Aarpepfx Akqjda

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 5.785 h, Okuma Genos L300e-MY stružniški center Leto izdelave: 2013 Tehnične podrobnosti: Krmilnik: OSP P300L-R Premer struženja: 340 mm Dolžina struženja: 1020 mm Premer vretena: 65 mm Hitrost vretena: 25 - 3000 1/min Glavni motor vretena: 15/11 kW Pomik po osi X: 235 mm Pomik po osi Y: +50 / -50 mm Pomik po osi Z: 1074 mm Najmanjši indeksacijski kot C-osi glavnega vretena: 0,001° Število orodij v revolverski glavi: 12 Hitrost pogonskih orodij: 45 - 4500 1/min Število pogonskih orodij: 12 pozicij Orodni priključek: VDI40 Pogonski motor za pogonska orodja: 7/3,3 kW Podajalec materiala: SPACESAVER 2210 ( dolžina palice 1500 mm, premer do 67 mm ) Dimenzije stroja: 4370x2540x2490 mm Teža: 7500 kg Nodpfx Akjzat Tvjqoda Dodatna oprema / možnosti: - Podajalec palic SPACESAVER 2210 - Transporter za odrezke - Lovilec končnih izdelkov - Renishaw roka za merjenje orodij - Držala za pogonska orodja - Držala za statična orodja - Hidravlična glava - Čeljusti za glavo - Dokumentacija - Odsesovalec prahu

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 29.048 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 16 mm, Premer palice (maks.): 16 mm, PREVLEČNI CNC AVTOMAT TIPE EvoDEO 16a Z PARALELNO DIGITALNO KONTROLO PNC-DECO FANUC TYPE 16i-TB, KAPACITETA 16 MM / 10 OSI z avtomatskim podajalcem Elite 220 Vključuje: - Osnovni stroj 10 osi FANUC 16i-TB - Sinhronska rotacijska puška 16 mm z vključenim pogonom - Funkcija osi C1 - Funkcija polarnih koordinat na osi C1 ali C4 - Pogon S6 (8.000 vrt./min) za max 3 vrteča se orodja na orodnem sistemu (X1-Y1), nesinhronizirano s S1 - Pogon S2 (8.000 vrt./min) za max 3 vrteča se orodja na orodnem sistemu (X2-Y2) - Pogon S3 (8.000 vrt./min) za max 3 vrteča se orodja na koncu - Pozicionirano zaustavljanje kontrasvedra - Funkcija osi C4 - Omejevalnik hoda vpenjanja kontrasvedra (sistem za fino nastavitev Ø vpenjanja) - Izvlek delov s prilagodljivim pnevmatskim cilindrom, vključno s čiščenjem primeža kontrasvedra z oljem (maksimalni hod cilindra 150 mm) - Pogon S5 (8.000 vrt./min) za max 6 vrtečih orodij (sinhronizacija z S4) - 3-barvna lučna signalizacija, nastavljiva (barve: rumena, rdeča, zelena) - Centralni mazalni sistem BIJUR - Prilagoditev za delo brez puške (max dolžina kosa 50 mm) (zahteva eno izmed opcij 0937 do 0941) - TB-DECO ADV programerska programska oprema MOBILNA PREVLEKA S1 (Z1) - 12.000 vrt./min - Vrtenje palice v desno - Prilagoditev za vložek SCHAUBLIN F22 (št. 76-0071) ORODNI SISTEM (X1-Y1 / X2-Y2) - 2 neodvisna vozička s po 5 mesti - 2 neodvisna pogona S2, S6 APARAT NA KONCU - Neodvisen voziček s 4 mesti - Neodvisen pogon S3 NEODVISNA KONTRAVRETENA (Y4-Z4) - 12.000 vrt./min - Prilagoditev za vložek SCHAUBLIN F20 (št. 76-201) DODATNE OPERACIJE (X4) - 6 mest (3 na koncu, 3 prečna) RAZNO - Sistem izmeta in prevzema izven stroja - Prilagodljiva hladilna črpalka - Delovna svetilka Ndjdpfezd Sq Hsx Akqoa - Električni vmesnik za protipožarno zaščito po CE in EMC standardih CNC KONTROLA - FANUC 16i-TB krmilje - 10'' barvni zaslon - TB-DECO ADV programerska programska oprema (verzija 750-005 + 750-0710) OPREMA - Prilagoditev za vložke F13 - Dolgi suport za struženje, sekcija 12x12 mm ali ½ inch, vrtenje palice v desno - Prilagoditev za vložke - Sistem sprednje nastavitve zatezne sile vložka F13 - Sistem sprednje nastavitve zatezne sile vložka F20 - Električni vmesnik 2004 (max2) z dvema vtičnicama za do 2 poljubni periferiji - Švicarska vtičnica 230 V - Sistem za ekstrahiranje oljne megle

Stanje: dober (rabljeno), Leto izdelave: 1990, Macmon M 100 E universal milling machine with 2-axis Elesta-Heidenhain digital readout, from a training department. Features a fixed table and SK 40 spindle taper. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Ndedpjrazzrsfx Akqja

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 Ndodpfx Aou Nvxmekqja >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Ndjdoxyc Tkepfx Akqea Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: zelo dobro (rabljeno), Na prodajo natančen orodjarniški mikroskop priznane japonske znamke Mitutoyo, model TM-101 (koda 176-901). Naprava je namenjena za kontrolo dimenzij, oblik, profilov, površin in kontur v orodjarnah, merilnih laboratorijih ter oddelkih za kontrolo kakovosti. Proizvajalec: Mitutoyo Mfg. Co. Ltd. Japan Tip: TM-101 Digitalni odčitki Mitutoyo na oseh X in Y s funkcijama ABS in INC, preset, izhod podatkov Merilna križna miza z vrtenjem in nastavitvijo Osvetlitvene funkcije Surface, Contour, Main Napajanje AC 220V, 50–60 Hz, 8 VA Masivna, stabilna industrijska konstrukcija Zelo dobro stanje, popolna naprava, tehnično brezhibna, pripravljena za uporabo. Idealno za merjenje rezalnih orodij, rezkarjev, svedrov, ploščic, pregled preciznih komponent ter merjenje kontur, navojev in geometrije detajlov. Ndedpfx Aew R E Hijkqea

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 34.809 h, Funkcionalnost: popolnoma funkcionalen, TORNOS SA EvoDECO 16a z avtomatskim podajalnikom Elite 220 Vključuje: - Osnovni 10-osni stroj, krmiljenje FANUC 16i-TB - Sinhronski rotacijski vodilni tulec 16 mm, vključno z pogonom - Funkcija osi C1 - Funkcija polarnih koordinat osi C1 ali C4 - Pogon S6 (8.000 obr/min) za največ 3 vrtljiva orodja na orodnem sistemu (X1-Y1), nesinhroniziran z S1 - Pogon S2 (8.000 obr/min) za največ 3 vrtljiva orodja na orodnem sistemu (X2-Y2) - Pogon S3 (8.000 obr/min) za največ 3 vrtljiva orodja na koncu - Pozicionirana ustavitev kontra-vretena - Funkcija osi C4 - Omejitev prijemne poti kontra-vretena (sistem za fino nastavitev Ø prijemanja) - Izvlečni sistem s pnevmatskim cilindrom, nastavljiv, vključno s čiščenjem prijemala kontra-vretena z oljem (maks. hod pnevm. cilindra 150 mm) - Pogon S5 (8.000 obr/min) za največ 6 vrtljivih orodij (sinhronizacija s S4 možna) - Tribarvna svetlobna signalizacija, nastavljiva (barve: rumena, rdeča, zelena) - Centraliziran sistem mazanja BIJUR - Prilagoditev za delo brez vodilnega tuleca (maks. dolžina obdelovanca 50 mm) (zahteva eno izmed opcij 0937 do 0941) - Programerska oprema TB-DECO ADV PREMIČNA GLAVA S1 (Z1) - 12.000 obr/min - Vrtenje palice v desno - Prilagoditev za prijemalo SCHAUBLIN F22 (št. 76-0071) ORODNI SISTEM (X1-Y1 / X2-Y2) - 2 neodvisna vozička s po 5 pozicijami - 2 neodvisna pogona S2, S6 KONČNA ENOTA - Neodvisen voziček s 4 pozicijami - Neodvisen pogon S3 NEODVISNO KONTRA-VRETENO (Y4-Z4) - 12.000 obr/min - Prilagoditev za prijemalo SCHAUBLIN F20 (št. 76-201) KONTRA OPERACIJE (X4) - Postaje s 6 pozicijami (3 na koncu, 3 prečne) OSTALO - Sistem za odvod in sprejem izdelkov izven stroja - Črpalka za emulzijo z nastavljivim pretokom - Delovna svetilka - Električni vmesnik za protivnetno napravo v skladu s CE in EMC standardi CNC KRMILNIK - CNC FANUC 16i-TB - 10'' barvni zaslon - Programerska programska oprema TB-DECO ADV (verzija 750-005 + 750-0710) Nodpfxozd Shle Akqoda OPREMA - Prilagoditev za prijemala F13 - Dolgi stružni nosilec orodja, prerez 12x12 mm ali ½ inča, vrtenje palice v desno - Prilagoditev za prijemala - Sistem nastavitve prijema prijemala F13 spredaj - Sistem nastavitve prijema prijemala F20 spredaj - Električni vmesnik 2004 (maxi2) z 2 vtičnicama za priklop do 2 izbrani periferiji - Švicarska vtičnica 230 V - Naprava za izločanje oljne megle

Stanje: delavnici obnovljeno (rabljeno), Please read the technical specifications thoroughly. If the machine is under consideration as an investment for you, we kindly ask that you provide your full identification, including a correct telephone number and email address, in order to receive a quotation. Deckel FP1 AKTIV (3-axis Active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - 3-axis active digital display HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralised lubrication Ndedpfx Akoxpwfgsqoa Footprint (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos demonstrating the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measured over 150 mm) Parallelism deviation X axis: 0.002 mm (measured over 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Price: net, ex works, loaded from stock

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krmiljenje Winmax Pomiki X/Y/Z: 1270 x 660 x 610 mm Hitrost vretena 10.000 min-1 Orodni magazin za 24 orodij, SK 40 Notranje hlajenje 20 bar Rezkanje žepov z otoki Ndodpfx Aszwhlaskqja Sinhrono rezanje navojev

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 850 mm, pomik osi Y: 520 mm, pomik po osi Z: 475 mm, hitro pomikanje X-os: 42 m/min, hitrost pomika os X: 42 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, višina obdelovanca (maks.): 800 mm, teža obdelovanca (maks.): 1.000 kg, skupna višina: 2.700 mm, skupna dolžina: 3.600 mm, skupna širina: 2.300 mm, širina mize: 1.100 mm, višina mize: 570 mm, skupna masa: 5.750 kg, hitrost vretena (min.): 14.000 obr/min, moč vretenovega motorja: 15 W, Oprema: transportni trak za ostružke, Leto izdelave: 2015 CNC krmilnik: Heidenhain TNC 640 Osi Gib osi X (mm): 850 Gib osi Y (mm): 520 Gib osi Z (mm): 475 Hitrost podajanja (m/min): 42 Hitrost hitrega premika (m/min): 42 Pospešek v osi (m/s2): 5 Delovna miza Dimenzije mize (mm): 1100x570 Največja velikost obdelovanca (premer x višina) (mm): H=800 mm Največja teža obdelovanca (kg): 1000 Vreteno Število vrtljajev vretena (RPM): 14000 Moč pogona vretena (kW): 20,3/14,5 (40/100% ED) Hlajenje Hlajenje skozi središčno palico vretena: 20 Prostornina rezervoarja: 600 Orodni sistem Orodni nosilec: SK 40 Število mest v orodni reviji: 20 S prostimi sosednjimi mesti (mm): 130 Z zasedenimi sosednjimi mesti (mm): 80 Največja dolžina orodja (mm): 300 Čas menjave orodja (s): 5.7 Oprema Elektronsko ročno koleso Transportni sistem za odrezke Infrardeča sonda Notranja naprava za dovajanje hladilne tekočine Pistola za izpiranje Način delovanja 4 Dovajanje zraka skozi središčno palico vretena, izbirno prek funkcije M Direkten merilni sistem XYZ Filtrirni trak za papir Čas delovanja stroja Pod napetostjo: --- Ndjdpfx Akjznniaeqoa Delovanje vretena: ----- Nazivna moč (kVA): 19 Osnovne dimenzije / teža stroja Dolžina (mm): 3600 Širina (mm): 2300 Višina (mm): 2700 Teža (kg): 5750

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Universal Tool Milling Machine DECKEL FP 1 With 3-axis digital readout Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 mm Y 160 mm Z 340 mm Nodpfjpxm Anjx Akqjda Speed range: 40 – 2000 rpm Including the following accessories: Universal table 600 mm x 250 mm clamping surface Swiveling vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vise 1 pc. steady rest with counter bearing 1 pc. long milling arbor Ø 22 mm Various tool holders S 22 x 2 Z-axis bellows Machine lamp Automatic central lubrication pump Chip tray Coolant system Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! Ndsdpfxjw Agxrj Akqea THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 4.500 h, MT Cut UDS1785 Pomiki osi X 850 mm Nedpoy Ug Epofx Akqoda Y 520 mm Z 610 mm Orodni držalo HSK 63 Hitri pomik X/Y/Z 32 m/min Orodni magazin 60 mest Teža stroja 6.800 kg Krmiljenje Heidenhain TNC 640 IKZ, 50 bar Maks. hitrost vrtenja 12.000 obr/min Členasti trakasti transporter, izmet levo Zrak skozi vreteno BLUM A2, laserski sistem za merjenje orodja Merilna tipalka Heidenhain TS 460 Rotoclear, vrtljivo opazovalno okno Odsesovanje emulzijske megle, SARA UC2D Leto izdelave: 2018 Vklop vretena 4512

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Maier ML 32 D pro Line s priključkom FMB je visokoprecizen CNC stružni avtomat z dolgim vodenjem (Swiss-Type) za zahtevno obdelavo kovin. Tehnični podatki: Ndsdpfxoy D Nwas Akqea Glavna in protivretena • Največji premer struženja: 32 mm • Največji prehod vretena: 32 mm • Največji hod vretena (dolžina struženja): do 310 mm • Hitrost vrtenja vretena (glavno & protivreteno): do 6.000 vrt/min • Moč vretena (glavno vreteno): 5,5 kW • Moč vretena (protivreteno): 3,7 kW • C-os: prisotna na glavnem in protivretenu (0,001° oziroma 5° mehansko indeksiranje) Osi in krmiljenje • Število osi: 9 krmiljenih CNC osi (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3) • Hitrost hitrega pomika: 32 m/min • CNC krmiljenje: MAIER PRO – GE FANUC (Fanuc 18iT) Orodni sistem in obdelava • Skupno število orodnih postaj: do 24 orodnih postaj (od tega do 16 pogonjenih/rotirajočih, odvisno od konfiguracije) • Prečna obdelava: običajno 5 do 6 fiksnih rezil (presek stebla 16x16 mm) in 4 pogonjene postaje • Zadnja stran obdelave: omogočeno za sočasno delo na glavnem in protivretenu Dimenzije in teža • Teža stroja: cca 3.800 kg do 4.200 kg (samo masa stroja, brez podajalnika palic) • Dimenzije (D x Š x V): cca 2.640 mm × 1.600 mm × 1.900 mm • Kapaciteta hladilne tekočine: cca 240 litrov