Niverplast Avtomatska Pakirna Linija nakup rabljenega (2.822)

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel Ppjdpfxogp Diae Agxer - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: zelo dobro (rabljeno), LINIE (Baujahr 2024) zur Beförderung, Montage und Verpressung von Möbelkorpussen. Zusammengesetzt aus: A) Motorisiertes Förderband zur Beförderung und Montage von Möbelteilen (Länge 2500 mm) B) Einspann- und Pressmaschine Modell WEPRESS TWIN EP 8.2 mit motorisiertem Gurtförderer; Möbelmaße: - Min./Max. Länge: 250 / 2500 mm - Min./Max. Tiefe: 300 / 820 mm - Min./Max. Höhe: 250 / 1200 mm C) Wendestation (0°–180°) automatisch (motorisiertes Gurtband), Länge 1800 mm, mit Klappen D) Motorisiertes Förderband (Länge 2500 mm) E) Motorisiertes Förderband (Langsamgang), Länge 7000 mm, zur Schubladen-, Eckenschutz- und Kartonagenzuführung (Verpackung) F) Motorisiertes Förderband (Länge 5000 mm) G) Motorisiertes Förderband (Länge 2500 mm) H) System Modell SILVERPACK 150 LIGHT - S, selbstdimensionierendes System für das automatische Verschließen (oben/unten) von Kartons. Komplett mit unterem und oberem, selbstjustierendem (Klebeband-)Taper. Maximal nutzbare Abmessungen (Außenmaß Karton): 1530 x 820 x 1350 mm (H). Minimal nutzbare Abmessungen (Außenmaß Karton): 300 x 160 x 160 mm (H) Ppodpfjwcn Hdox Agxer I) 90°-Querverschiebung (mit Rollen und 6 Riemen) zum Auslauf von verpackten Produkten (1600 x 850 x 700H mm) L) Schrägbahn mit Leerlaufrollen zur Sammlung von verpackten Möbeln (6000 x 800 x 450H mm)

Stanje: zelo dobro (rabljeno), Flexible NC line for drilling, milling and hardware insertion. Numerical control "TPA" Albatros. Consists of: 1) "Igel" loader with 12 positions (for 12 panels), vertical panel feed. 2) Drilling machine, NC pantograph model Over 25.13 with inserter (bushings, shelf support and base). Pedpfxjhvagkj Agxopr - No. 1 working spindle (approx. 5.5 kW) with turret (10 positions) - No. 1 drill head with 24 independent spindles (X-axis) - No. 1 boring head with 2 independent spindles (Y-axis) - No. 1 drill head with 5 independent spindles (Z-axis) - No. 1 assembly unit (screwing) - No. 1 assembly unit (press fitting) - No. 1 storage and feed hopper 3) Unloading unit (90° transfer), with motorized conveyor for vertical panel discharge. 4) Unloading unit (0°-90°), with motorized conveyor to transfer panels from vertical to horizontal.

Leto izdelave: 2021, stanje: rabljeno, Lumacon avtomatska linija za polnjenje zabojčkov Avtomatsko podajanje 4 zabojčkov/kosov na cikel. Ko je dosežena želena teža, transporterji odstranijo napolnjene zabojčke in pripravijo 4 prazne zabojčke za naslednje polnjenje. - Popolna z dvižnimi transporterji - Vmesni (buffer) trakovi Pedpfx Agov E Irgjxepr - Tehtalni trakovi - Več linij na zalogi (Emmeloord)

Stanje: novo, Leto izdelave: 2020, OGLEJTE SI fotografije + priložen PDF načrt 1 NOVA CSP avtomatska popolna linija za pakiranje parketa v skrčljivo folijo (leto 2020), nikoli uporabljena. CELOTNA LINIJA je sestavljena iz: valjčne proge + industrijskega skenerja parketa + stroja za trakovenje + linije za pakiranje v skrčljivo folijo AVM 700 + valjčnega transporterja + grelne enote + avtomatskega etiketiranja + zbiralnega akumulatorja z dvojno prečno transportno napravo. (glej PDF načrt) Pedpfx Aeypb U Togxopr

Stanje: rabljeno, Proizvajalec: Indosa Poreklo: Švica Leto: 1990 (popolna nadgradnja leta 2006 z Siemens PLC) Glavni stroj: Indosa Matic 100 avtomatski zapiralec Polnjenje/doziranje: modul AW7/500 Vakuum/sesalni sistem: CK-V09 Akumulacijska miza: ZT800 Transport: 12-postajni zvezdni transporter Dovod produkta: pnevmatski prenos Tip stroja: avtomatska linija za polnjenje in zapiranje pločevink Tip škatle: kovinska ali kompozitna Uporaba: suhi in zrnati izdelki Primeri: tobak, prah, granulati, suha hrana, trdni izdelki Kapaciteta: do 40-50 enot/min (integrirana regulacija hitrosti) Premer pločevinke Ø 80 mm standard (drugi premeri na zahtevo) Višina škatle od 20 do 320 mm Tip doziranja: tehtanje (vibrator + vedro) Dovod produkta: pnevmatski prenos Zapiranje kovinskih pokrovov, integriran zapiralni modul Ppodex R Dypjpfx Agxer Vakuum, integriran sistem za zbiranje prahu CK-V09 Shranjevalnik pokrovov: da Avtomatski nadzor Dokumentacija je na voljo v digitalni obliki. Stanje/dodatne informacije: video na voljo v delovanju.

Stanje: novo, Leto izdelave: 2026, Industrial Edgebanding Machine The design of the edgebanding machine ensures flawless application of 35 mm edge banding tape, while supporting thicknesses from 7.5 to 60 mm. This covers the full range of edge banding requirements, including situations such as missing corners or open gaps. It is also specially designed for door panel structures, allowing the edge to be applied without additional processing steps. Total power: 34.5 kW Minimum workpiece length: ≥ 120 mm Minimum workpiece width: ≥ 35 mm Workpiece thickness: 7.7 – 60 mm Edge banding thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5,130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-Sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-sided drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, meeting a variety of process requirements and offering maximum flexibility for bespoke, batch-size-one production. The machine comes equipped with top and bottom drilling units, a 5.5 kW ATC8 main spindle, and a 2+8 tool change magazine. Ppjdpfxeyb Rxle Agxer

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Vertikalna pakirna linija CAMPAGNOLO C95E-1 + CW14-2.5L (prigrizki, oreščki, kosmiči, ektrudirani izdelki) Psdpfeqbryxjx Agxopr Popolna vertikalna linija za oblikovanje, polnjenje in zapiranje vrečk, zasnovana za doziranje in pakiranje prigrizkov, kosmičev ali ektrudiranih izdelkov. Sistem združuje večglavo tehtnico, vertikalni pakirni stroj ter napredno opremo za označevanje in promocijske dodatke, kar zagotavlja visoko prilagodljivost različnim vrstam in formatom vrečk. KOMPONENTE Vertikalni pakirni stroj – Model C95E-1 • Za blazinaste vrečke in vrečke s kvadratnim dnom • Združljiv z mono- in bi-slojnimi toplotno varjivimi folijami • Zmogljivost: do 60 vrečk/min (kvadratno dno) ali 80 vrečk/min (blazinaste) • Širina vrečke: 50–245 mm  Dolžina: do 390 mm • PLC krmiljenje s 7-palčnim barvnim zaslonom na dotik (50 pomnilniških mest za recepte) • Vodoravno varjenje gnano z brezkrtačnim motorjem; navpično varjenje pnevmatsko • Enkoder za spremembo dolžine vrečke • Samodejni stikalec folij in alarm za konec folije • Zaščite skladne s CE (EU direktiva za stroje 2006/42/ES) • Poraba elektrike: cca. 3 kW  Poraba zraka: 300 l/min pri 7 bar Priložena oprema • Okrogla oblikovalna cev + dodatni set za oblikovanje (okrogli in pravokotni zaključki) • Skupina za oblikovanje vrečk s kvadratnim dnom in pregibom • Enota za izsek luknje (Euroslot) • Fotocelica za centrirano registracijo tiska • Površine v stiku s produktom iz nerjavečega jekla (AISI 304) • Izmetni kanal za vrečke in izhodni transportni trak 350 × 2000 mm • Rotacijska miza iz nerjavečega jekla, Ø 1200 mm Večglava tehtnica – Model CW14-2.5L • 14 tehtalnih glav z 2,5-litrskimi snemljivimi posodicami • Pogon na koračne motorje za natančno in tiho delovanje • Natančnost: ± 0,2 – 1,5 g (odvisno od izdelka) • Hitrost: do 75 tehtanj/min za pakiranja 40 g • 10-palčni barvni zaslon na dotik s kapaciteto 99 receptov • Povsem nerjaveče jeklo (AISI 304), zaščita IP65 • Avtodiagnostika in samopreizkusne funkcije • Električna moč: 1,1 kW, 220 V, 3-fazno, 50 Hz Priložena oprema • Sinhronizacijska posoda s koračnimi motorji • Dovajalni transportni trak z rezervoarjem • Podporni okvir z lestevjo in varovalno ograjo • Produktni elevatro (400 × 5500 mm) • Vibracijski dozirni lijak (170 l) Dodatne integrirane možnosti • Tiskanje in označevanje s trakom • Programabilni termo-transfer tiskalnik za trak, tiskovno območje 32 × 50 mm, ločljivost 300 dpi, priložena programska oprema za urejanje predlog in logotipov • Enota za vstavljanje promocijskega traku (dodatna trakovna skupina) • Samodejna naprava za vstavljanje promocijskih trakov v fazi nastajanja vrečk • Skupina Chapelet (verižna izdelava vrečk), za oblikovanje neprekinjenih verig medsebojno povezanih vrečk • Sistem za injiciranje dušika za MAP (pakiranje v spremenjeni atmosferi) za podaljšanje roka uporabnosti izdelkov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Automatická linka na lepení dřeva GRECON Ultra Rok výroby: 2003 Technický stav: velmi dobrý, stroj pravidelně udržovaný Technická data: Ppedpfx Aoy Amk Ujgxsr • Délka vstupního kusu: 150–1000 mm • Šířka dřeva: 40–205 mm • Tloušťka dřeva: 20–80 mm • Výstupní / lisovací délka: 6100 mm • Lisovací síla: 120 kN / 12 t • Max. průřez pro zubové spoje 10/11 mm v měkkém dřevu: 100 cm² • Max. průřez pro zubové spoje 10/11 mm v tvrdém dřevu: 80 cm² Výkon: • Vertikální lepení: • Ultra: 15,2 m/min Vybavení / konstrukce: • Balíková frézka 600 mm široká • Ruční otočný stůl • Automatické otočení materiálu a přenos do lisu • Stroj pracuje v plně automatickém cyklu • Pro obsluhu je potřeba 1 osoba Možnost odborné demontáže, montáže, uvedení do provozu a zaškolení obsluhy stroje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Filling and Packaging Line for 50 ml Vials 1. Vial Loading Machine: Rotary Table, SSS Conveyor Technology, Year of Manufacture 2007 Empty or already filled and sealed 50 ml vials are manually placed onto a rotary table. From there, they are singulated onto the conveyor belt and fed into the next stages of the line. 2. Labelling with Print and Camera Inspection Ppedpfx Asxb Uptsgxsr Machine: Pago System 520, Year of Manufacture 2007 Printing System: Domino 320i Thermal Transfer Printer Camera System: Cognex (integrated into Pago) The vials are labelled with self-adhesive labels. During labelling, batch numbers, expiry dates, etc. are printed directly onto the label via thermal transfer (Domino). At the same time, a camera-based inspection (Cognex) is performed on the printed data. The inspection results are displayed on an integrated screen. Both the printing and camera systems are fully integrated into the Pago labelling machine. 3. Changing Vial Orientation (Vertical to Horizontal) Machine: FlexLink Conveyor XH, SSS Conveyor Technology, Year of Manufacture 2016 The labelled vials are moved to a horizontal position via a vial orienter to prepare them for insertion into the cartoner. 4. Cartoning with Leaflet Insertion Machine: MK-120, Harro Höfliger, Year of Manufacture 2007 Preformed folding cartons are automatically erected in the cartoner. Simultaneously, a leaflet is folded and provided by a GUK folding machine. One 50 ml vial and one leaflet are automatically inserted into each folding carton. In the configuration shown here, the base of the carton is sealed with hot glue and the top is closed with a tuck-in flap. Optionally, with existing format parts, the machine can be converted to double tuck-in flaps without glue sealing. 5. Serialization and Camera Inspection Machine: Laetus PrintSpect TTS MV-70, Year of Manufacture 2015 After the cartoner, the folding cartons are printed (thermal transfer) with serial numbers and variable data and then fully inspected by a Laetus camera system. This station was retrofitted in 2015. The Harro Höfliger MK-120 also has an integrated Wölke printing system, which is not used here. 6. Tamper-Evident Labelling Machine: Pago System, Year of Manufacture 2007 The serialized folding cartons are sealed on the tuck-in flap sides with tamper-evident labels. To do this, the cartons are precisely aligned and guided via side belts. 7. Case Packing Machine: IMA CP18BA Case Packer, Year of Manufacture 2007 The finished individual cartons are pneumatically pushed into shipping cases. The case packer seals the shipping cases with hot glue. 8. Final Labelling of Shipping Cases Machine: Laetus VL4 C2 ICMV Cabinet + Pago Labeller, Year of Manufacture 2015 The finished shipping cases are labelled via thermal transfer printing. No camera-based inspection is performed at this station. This unit is used exclusively for labelling shipping cases (no serialization or aggregation). 9. Inspection (optional) A manual checkweigher is also available but is not included in the sale and was only used for internal final inspections. Line available from Jan. 2026. Further information to follow.

Stanje: dober (rabljeno), Vakumski polnilni stroj Handtmann VF628 s PVLS143 visokohitrostnim vezalnikom/rezalnikom iz leta 2021 ter avtomatski sistem za nalaganje pladnjev GS300, ki ga sestavljata GM310 in ZB311. Redko v ponudbi. Po želji lahko ponudimo tudi podoben komplet s strojem VF622 namesto VF628. Pjdpfxevvxumo Agxepr

Stanje: rabljeno, RSA RASACUT SC 3000 – Complete Automatic Line for Tube Cutting, Deburring, Length Control, Washing, and Drying This is a high-performance, fully integrated RSA line for tube processing, designed for continuous production: from raw tubes to finished tube sections at fixed lengths, up to 3,000 mm. Pedoyllvyjpfx Agxjpr The system covers the entire workflow: Package Loading → Cutting → Deburring → Measurement (Length Control) → Cleaning (Washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed-length cutting up to 3,000 mm · Complete RSA line: Package Loading + Cutting + Deburring + Measurement + Cleaning (Washing) + Drying · Automatic tube singulation from bundle loader · Servo-controlled saw feed with programmable cutting parameters · Automatic, hands-free interconnection between stations · 360° deburring (internal + external) · 100% length measurement with automatic reject · Integrated washing and drying system for finished tubes · Siemens control: S7-300 + OP17 · Comprehensive set of clamping jaws included TECHNICAL DESCRIPTION 1. Bundle Loader Bundles are loaded into the storage by crane or forklift. The system automatically separates the tubes and feeds them onto the entry roller conveyor, enabling continuous processing for tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic cutting unit with servo-controlled feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length. Cutting parameters are fully adjustable for consistent, repeatable results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous internal and external deburring on both ends. Adjustment is fully automatic from the central control panel. 4. Measurement | RSA RASACHECK 3000 A Integrated length measurement station with 100% control of finished parts. Out-of-tolerance pieces are automatically rejected, ensuring only in-spec tubes progress to subsequent stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed to thoroughly remove chips and contaminants. Tubes pass through a closed washing zone where cleaning fluid is applied under pressure and contaminants are collected in a chip filter. 6. Drying | TURBODRY Hot air drying station with adjustable airflow and temperature. Removes droplets and condensation after washing, delivering fully dry tube sections for further handling. 7. Tooling | Comprehensive clamping jaw set Supplied with a wide range of clamping jaws for various tube diameters, allowing quick changes without additional tools. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Maximum input tube length: 8,000 mm · Finished (fixed) cut lengths: 150 to 3,000 mm (up to 2,000 mm for Ø 10–14 mm) · Tube weight: max. 10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm: ±0.2 mm | Ø50–74 mm: ±0.25 mm | Ø75–90 mm: ±0.3 mm In production (machine operational). Contact us for a quote, full information, or to arrange a visit...

Leto izdelave: 2007, stanje: skoraj kot novo (rabljeno), FICEP 601 DZB CNC VRTALNA LINIJA s 4-stransko FUNKCIJO OZNAČEVANJA I-profil (brez ukrivljenosti): Višina pasnice najmanj 60 mm, največ 610 mm. Širina pasnice najmanj 30 mm, največ 310 mm. UNP profili (s steno navzdol): Višina pasnice najmanj 60 mm, največ 610 mm. Širina pasnice najmanj 30 mm, največ 300 mm. Koti (tudi neenakih krakov): Višina kraka najmanj 50 x 50 x 5 mm, največ 250 x 250 x 40 mm. Ploščati materiali: Širina najmanj 100 mm, največ 610 mm. Kvadratne cevi: Dimenzije najmanj 60 x 60 mm, največ 300 x 300 mm. Pravokotne cevi: Dimenzije najmanj 60 x 30 mm, največ 600 x 300 mm. Vsi profili: Največja debelina za vrtanje 50 mm. Maksimalna vhodna dolžina 12.000 mm. Pedpfxjh N Taaj Agxspr

Stanje: dober (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Automatic edging line Söderhamn (Kockums) Edger 511-A Year of manufacture approx. 1975–1980, or 2000 including complete infeed conveyor 6.2 m x 1.5 m with automatic centering and motorized feed Board width can be infinitely pre-selected Feed speed: 77–118 m/min Minimum edging width: 75 mm Maximum edging width: 350 mm Maximum wood thickness: 125 mm Fixed saw blade 6 feed rollers Ppjdpfxouq N Ago Agxor Saw spindle speed: 1800 rpm Max. saw blade diameter: 650 mm Weight with motor and control panel: 2050 kg

Stanje: rabljeno, Automatic mesh welding line TE 30 S manufactured by EUROLLS Model: TE 30 S Maximum stacking height: 500 mm Wire diameter: - Top line (ds – smooth or barbed): 4 to 12 mm - Bottom line (di – smooth or barbed): 4 to 12 mm - Diagonal wire (dg – smooth or barbed): 3 to 8 mm Diagonal pitch (P): 200 mm Ppedpsvtqacsfx Agxjr Beam pitch: 400 mm Maximum speed with hot- and cold-drawn wire: max. 30 m/min Maximum feeding coil weight: 3,000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.400 mm, skupna višina: 2.300 mm, skupna širina: 250 mm, teža obdelovanca (maks.): 72 kg, Müüa peaaegu uus automaatne pulbervärvimisliin, paigaldatud 2023. aastal, töötatud ca 800 tundi. Paigaldusala vastavalt olemasolevale paigutusele: ca 12 x 28 m, kõrgus 5 m. Ppodpfx Asx H Tadjgxer Hind ja demonteerimise tähtaeg sõltuvad individuaalsetest kokkulepetest. Paigutusskeemi saab muuta – võimalik lisada eelpuhastustunelle ja ahju ehitada sirge tunnelina kuni 6+ m detailide jaoks. Võimalik pakkuda kogu liini hinnaga koos demontaaži ja transpordiga teise riiki vastavalt kokkuleppele. Suurepärane võimalus soetada praktiliselt uus liin soodsama hinna ja kiirema tarnega võrreldes uuega. Monorels-konveier: - kiirus 0,9–3,3 m/min - automaatne määrimine - automaatne pingutusüksus - ahela samm 270 mm - kogupikkus 131 m - kogukoormus 9500 kg - terasest toed põrandal-konveieri vahel Automaatne pulbervärvimise kabiin Gema: - PVC kabiin MagicCompact EquiFlow BA04 - MagicControl 4.0 juhtpaneel - fototakistusega raam püstolite juhtimiseks - 16 x OptiGun GA03-P automaatvärvipüstol - 1 x OptiSelect GM04 käsipüstol - 17 OptiSpray AP01.1 värvipihustuspumpa - OptiCenter OC07 pulbervarustussüsteem - Ultrasonic sieve US07 OptiCenterile - 2 tk ZA07-23 reciprocatorit automaatse X-telje juhtimisega - MonoCyclone EZ05-16, 16 000 m3/h - Pulberfilter 16 000 m3/h, 30 kW - Big-Bag süsteem jäätmepulbri jaoks - CO2 plahvatuskaitsesüsteem - Manuaalse pritsseinaga / käruühik piltidel EI KUULU KOMPLEKTI Pulbervärvi kuivatusahi: - Hübriidküte – võimalik kasutada nii elektrit kui gaasi! Haruldane paindlikkus valida soodsama energiaallika vahel. - Paigaldatud võimsus 300 kW - Maks. temperatuur 220°C - Siemens PLC juhtpaneel

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MZBF02, Oprema: Android Auto, CE označba, Proizvodna linija je široko uporabna za polnjenje, zapiranje in označevanje različnih poltekočih, mazilnih past, gostih omak in materialov z zrni, kot so pijače s sadjem, med, sirup, marmelada, arašidovo maslo, sezamova pasta, paradižnikova omaka, paprika omaka ipd. Obratovalno načelo: Z izmeničnim gibanjem batov v polnilnih valjih polnilnega stroja nastane v prednji komori valja podtlak, ki omogoča sesanje materiala. Hodec bata se nadzoruje s signalnim ventilom, s katerim se prilagaja količina polnjenja in doseže natančnost polnjenja. Lastnosti: Polnilni stroj z dodatnimi funkcijami je zasnovan in izdelan v naši tovarni na osnovi primerljivih tujih strojev. Ppodpfx Agoxunctexsr

Stanje: novo, Leto izdelave: 2025, Maximum cutting section: 280x95 mm / 240x125 mm / 340x15 mm. Ppodpfx Agowk Himsxer Heavy-duty, reinforced, fully painted steel structure. Robust floor anchoring system with flanged steel adjustable feet for bolting. Dual-hand safety cutting controls positioned ergonomically. Independent pneumatic adjustments to suit various processing requirements. Progressive start-up with compressed air supply. Cutting speed easily adjustable via the pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with horizontal table. Heavy-gauge, highly robust sheet metal structure. Optimized weight-balancing system for motor and blade. End-of-stroke shock absorbers. Oscillation with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with facilitated access. Solid floor anchoring system with adjustable, flanged steel feet. Blade motor power: 7.5 HP (5.5 kW). HM circular blade, diameter: 500 mm. Teeth: Z=108. Bore diameter: 35 mm. Cutting time adjustable from 0.5 to 2 seconds. Cutting speed adjustable via pneumatic regulator on the control panel. Electro-pneumatically operated top hold-down clamp for securing workpieces. External speed and pressure adjustment available on the control panel. Intelligent clamp: automatically adapts to timber thickness, significantly reducing cutting times. Clamp actuation via new ball-bearing slides with double dust protection and automatic lubrication system. Long-life, easily replaceable aluminum blade guard. The entire system features individual and independent pneumatic adjustments, accessible externally on the control panel, to suit different types of processing operations.

Stanje: novo, Leto izdelave: 2025, Maximum cutting section: 610x30 mm / 520x100 mm / 420x150 mm. Heavy-gauge, reinforced, fully-painted steel frame. Solid floor anchoring system with flanged steel feet for bolting. Ergonomically positioned two-hand safety cutting controls. Independent pneumatic adjustments to adapt to various processing requirements. Progressive compressed air starter on feed line. Cutting speed easily adjustable via pneumatic regulator on control panel. Adjustable cutting time from 0.5 to 2 seconds. Cutting speed adjustable via pneumatic regulator on control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal table, equipped with zinc-plated idler rollers, load capacity 600 kg, diameter 89 mm, width 500 mm. Swing cutting movement with power transmission via belt group. Thick steel sheet structure, highly robust. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swinging supported by bearings. Motor mount with easy adjustment for perfect 90-degree cuts. Easy maintenance with facilitated access. Blade motor power: 14.8 HP (11 kW). HM circular blade, diameter 600 mm. Teeth: Z=108. Bore diameter: 35 mm. Ppjdpewk Iphjfx Agxor Electro-pneumatic upper workpiece hold-down with external speed and pressure adjustment on control panel. Intelligent hold-down: automatic adaptation to wood thickness, significantly reducing cutting times. Hold-down movement system with new ball-bearing slides featuring double dust protection and automatic lubrication system. Long-life, easily interchangeable aluminum blade guard. The entire system features individual, independent pneumatic adjustments, external and easily accessible on the control panel, to adapt to different processing requirements.

Stanje: generalkompletno obnovljen (rabljeno), Technical specifications Metal base, Control cabinet, Control panel, Siemens brand, All necessary information is displayed to the operator on the touchscreen, Long service life, Can be synchronized with all packaging machines; operates in line with carton packing machines, bag applicators, and/or vertical form fill seal (VFFS) machines, Ppsdpfx Agot Ibgrexjr Product-contact parts made of stainless steel or food-grade plastics, Available with 2, 4, 6, and 8 channels. Each channel equipped with backlash-free cam drive, Easy operation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Proizvajalec Niverplast na voljo za prodajo: Poz. 01) 3 kos transportnih trakov, širina x dolžina, 2.400 mm x 600 mm Ppodpfxsyifrao Agxsr Poz. 02) 1 kos transportnega traku, širina x dolžina, 2.600 mm x 500 mm Poz. 03) 1 kos transportnega traku, širina x dolžina, 3.000 mm x 600 mm Poz. 04) 5 kos transportnih trakov, širina x dolžina, 1.600 mm x 600 mm Poz. 05) 1 kos transportnega traku, širina x dolžina, 2.400 mm x 450 mm Poz. 06) 2 kos transportnih trakov, širina x dolžina, 900 mm x 600 mm Poz. 07) 3 kos valjčnih transportnih trakov, širina x dolžina, 665 mm x 665 mm

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €27,600 Leasing rate: €527.16 Saw frame: double-column guide Saw blade dimensions: 5750 x 41 x 1.3 mm Blade speed, stepless: 15 - 120 m/min Cutting capacity 0° round: 460 mm Cutting capacity 0° square: 460 mm Cutting capacity 0° flat: 520 x 460 mm Pedpeynnhqsfx Agxopr Working height: 585 mm Hydraulic motor: 0.55 kW Motor: 4 kW Coolant pump motor: 0.12 kW Length: 3000 mm Width: 1200 mm Height: 1800 mm Weight: 1,650 kg Roller feed with manually adjustable stop with microswitch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tensioning Gearbox designed for heavy-duty use Coolant system Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €54,900 Leasing rate: €1,037.61 Saw frame with double column guide Saw blade dimensions: 5400 x 41 x 1.3 mm Infinitely variable blade speed: 20-100 m/min Cutting capacity at 0° round: 440 mm Cutting capacity at 0° square: 440 mm Cutting capacity at 0° flat: 610 x 440 mm Cutting capacity at 30° round: 440 mm, square: 440 mm Cutting capacity at 45° round: 430 mm, square: 430 mm Cutting capacity at 60° round: 320 mm, square: 260 mm Working height: 807.5 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 2850 mm Width: 2350 mm Height: 2000 mm Weight: 3600 kg NC control Double column linear guide 3° cutting angle Chip brush Control panel Hydraulic feed clamp Hydraulic vice Hydromechanical blade tensioning Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Podpfxoynnhdj Agxepr Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro-spray system Laser cutting line Roller conveyors and saw blades ALTERNATIVE: BMSO 440 CGS NC (with servo feed instead of hydraulic feed) €61,900

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €22,700 Leasing rate: €435.84 Saw frame: Double column guide Saw blade dimensions: 4800x34x1.1 mm Blade speed: stepless 20–100 m/min Cutting capacity 0° round: 380 mm Cutting capacity 0° square: 380 mm Cutting capacity 0° flat: 430x380 mm Working height: 590 mm Hydraulic motor: 0.55 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2900 mm Width: 950 mm Height: 1660 mm Weight: 1342 kg Chip brush Control panel Hydraulic vice Pjdpfeynng Tox Agxspr Optical height adjustment Hydromechanical blade tensioning Inverter Mechanical upper clamping Material limiting chute Coolant pump Saw blade Safety switch Gearbox Pressure adjustment 1.2 meter roller conveyor Operating instructions in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Turkey Price: €72,800 Leasing rate: €1,375.92 Saw frame: double column guide Saw blade dimensions: 9500 x 54 x 1.6 mm Blade speed: infinitely variable 20–100 m/min Cutting capacity at 0° round: 1020 mm Cutting capacity at 0° square: 1020 mm Cutting capacity at 0° flat: 1020 x 1020 mm Cutting capacity at 45° round: 675 mm, square: 675 mm Working height: 535 mm Hydraulic motor: 2.2 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4,500 mm Ppedpfxeynng Hj Agxer Width: 1,700 mm Height: 2,750 mm Weight: 5,860 kg Hydraulic vice Hydraulic blade tensioning Infinitely variable speed control Linear guides Height adjustment via optical sensor automatic saw frame lift after cut automatic guide arm adjustment synchronized with hydraulic vice movement sensitive cutting pressure control Coolant pump Saw blade Chip brush Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Chip conveyor Turntable for miter cuts Roller conveyors and additional saw blades