Nimo-Kg Lestvica nakup rabljenega (71.387)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors. Godeu Tha Iepfx Aa Ujiu

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Gijdpsu Thh Eefx Aa Usu Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Durchgang zwischen den Ständern: 4300mm, Schnittlänge: 4050mm, Messerlänge: 4200mm, Schnittwinkel einstellbar: 1,5-2,5°, kl./gr. Streifenbreite mit Anschlag vorn: 40mm, kl./gr. Streifenbreite mit Anschlag hinten: 1000mm, Tischhöhe über Boden: 850mm, Tischlänge: 4200mm, Tischbreite: 650mm, mit 3 Verlängerungsarmen à 500mm, Innenentfernung zwischen Schnittmesser und Niederhalter plus 10mm: 35mm, Messer Untermesser: 1 Stück, Länge: 4200mm, Dicke: 35mm, Unterteilung: 2-teilig, Anzahl der Schneidkanten: 2, Messer Obermesser: 1 Stück, Länge: 4200mm, Dicke: 35mm, Unterteilung: 2-teilig, Anzahl der Schneidkanten: 2, Führungslineale für rechtwinklige Schnitte: 1 Stück, Zubehör/Sondereinrichtungen: Anschlagverstellung, Tischverlängerung, Blechrutsche, Seitenanschlag 1000mm, Schnittlängenbeleuchtung, mit Dokumentation. Eine Besichtigung vor Ort ist möglich. Godpjy U Nqbofx Aa Uoiu

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Gjdpfx Aajy Ta Als Usiu Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.

Stanje: zelo dobro (rabljeno), Profesionalna vibracijska plošča priznane znamke AMMANN. Model AVP 2920 je opremljen z zanesljivim dizelskim motorjem HATZ z močjo 5 kW. Stroj je namenjen profesionalnim tlakarskim in cestnim delom ter zgoščanju zemlje, tlakovcev, nasutja in asfalta. Naprava je popolnoma mehanska, robustna nemška konstrukcija. Vizualno stanje skladno s fotografijami – običajni znaki uporabe. Tehnični podatki: • Proizvajalec: AMMANN • Model: AVP 2920 • Leto proizvodnje: 1999 • Motor: HATZ Diesel • Tip motorja: 1B30-6 • Moč: 5 kW • Obratovalna masa: 190 kg • Ročni zagon • Izdelano v Nemčiji Uporaba: • zgoščanje tlakovcev • tlakarska dela • cestna dela • zgoščanje zemlje in nasutja • izkopi in temelji Stanje: Rabljeni, kompletni stroj. Motor HATZ – trpežna in cenjena dizelska enota. Gisdpfxoy Sifys Aa Ueu

Stanje: skoraj kot novo (rabljeno), Staff Ice System BTX150 stroj za izdelavo ledenih kock / ledomat 150 kg/24h letnik 2022 Tehnični podatki Gelato BTX150 A Staff Ice System stroj za izdelavo in shranjevanje sladoleda. Izdelava in shranjevanje sladoleda. Samodejna ekstrakcija. Mešalo z vzdržljivimi polietilenskimi lamelami. Dvojni pokrov omogoča dodajanje sestavin med procesom. Navpični rezervoar za popoln nadzor nad procesom predelave. 50 prilagodljivih delovnih programov. Tehnične značilnosti: Največja količina izdelane sladoleda na cikel 2 litra. Proizvodnja sladoleda 15 l/h. Dimenzije 43,5 x 59,2 x 59,5 cm. Gedpfx Aoyzc Ruja Usiu

Stanje: skoraj kot novo (rabljeno), Jeklene konstrukcije - 2,50 PLN na kg Godpoy H Eu Tefx Aa Uoiu

Stanje: skoraj kot novo (rabljeno), Popolnoma obnovljen Cena: 5.500 EUR Spiralni mešalnik za testo Gjdpfjx N Ed Tjx Aa Ueiu Kapaciteta: 100 kg moke 160/180 kg testa Diosna Prostornina posode: 260 litrov Električna moč: 380V / 50Hz / 3N/PE Dva časovnika Dve hitrosti Možnost vzvratnega hoda Polovični pokrov z varnostnim stikalom Kolesa z zavorami

Stanje: skoraj kot novo (rabljeno), Stroj po splošni obnovi Cena: 4.500 EUR Giedex N Efqopfx Aa Uju Mešalnik za testo Z lopatico Kemper Stroj ima 2 hitrosti Posoda in mešalo iz nerjavečega jekla Mobilna enota na kolesih Avtomatski časovnik Prostornina: 180 litrov / 120 kg testa ali 75 kg moke

Stanje: zelo dobro (rabljeno), Naprodaj električni verižni dvig Yale, model CPVF 10-8 NE, priznane blagovne znamke. Naprava je v zelo dobrem tehničnem stanju, opremljena z radijskim daljinskim upravljanjem Magnetek (daljinec + sprejemnik). Tehnični podatki • Model: CPVF 10-8 NE • Nosilnost: 1000 kg • Leto proizvodnje: 2019 • Napajanje: 400V / 3 faze • Hitrost dviga: 2 / 8 m/min Gisdsyrh I Espfx Aa Ueu • Upravljanje: radijski daljinski upravljalnik • Stanje: zelo dobro, običajni znaki uporabe

Stanje: zelo dobro (rabljeno), Key information: Type: Scissor lift table / lifting table Load capacity: 500 kg Condition: Used – fully functional Control: Handheld remote (up/down + emergency STOP) Power supply: 230/400V Gedpfx Aaoyw Ua Te Ueiu Year of manufacture: 2012 Price refers to: Complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Working pressure: 196 bar Weight: approx. 170 kg Tabletop dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: I am offering a professional hydraulic scissor lift – ideal for workshops, production facilities, and warehouses. This unit enables safe and convenient lifting of heavy objects to an ergonomic working height. Equipped with: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Included in the set: - Scissor lift table - Hydraulic power unit - Control remote 🚚 Shipping: - Pallet shipping - Personal collection possible

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Gjdpfjw Ivqmex Aa Usiu Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Gjdpfx Aaju Ey Dls Usiu Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Gjdpfshc T Nlex Aa Usiu

Stanje: rabljeno, Leto izdelave: 1984, nosilnost: 3.200 kg, Trenutno so na zalogi še 3 kosi. Enonosni polportalni mostni žerjav Proizvajalec: Christmann & Pfeifer KG Dvigalo: Demag Velikost: PLV 168 NF Nosilnost: 3.200 kg Podvozje: Demag Tip: 13/6PF 12/4 Uporaben hod kljuke: 4.800 mm Razdalja med tirnicami: 8.110 mm Teža: pribl. 2 t/kos Gijdpfxew Ugu Ae Aa Usu Cena velja za kos, franco naloženo. Žerjavi so že demontirani in zapakirani za transport. Stroj je mogoče ogledati na lokaciji. Vsi podatki brez garancije. Pridržujemo si pravico do vmesne prodaje.

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!! Gijdjyu R Dzspfx Aa Uou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Giodpfeyz Af Eox Aa Usu Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Steady rest (28388) Center height: 360 mm Gedpfx Aemkfd Soa Uoiu Weight: 37 kg Dimensions: see drawing

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M237 026, moč: 1.600 kW (2.175,39 KM), vrsta goriva: plin, Leto izdelave: 2005, obratovalni tlak: 10 letvica, 2x rabljena parna kotlovska naprava Proizvajalec: Viessmann Gedpfx Aaey Tpm Ho Ujiu Tip: M237 026, 2.300 kg/h Leto izdelave: 2005 Parna zmogljivost: 2.300 kg/h Obratovalni nadtlak: 10 bar CE 0035 Opremljeno z obstoječo armaturo, gorilnikom Weishaupt G8/1-D ZMD, krmilno omaro, ekonamizatorjem, avtomatskim izpustnim ventilom RTK, 2 črpalkama kotlovske vode itd.

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Giodohx Elfjpfx Aa Uju Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: Res BS, Demag PK2 Chain Hoist Crane Lifting Gear 250Kg / 500Kg Giedpfxsvzkyls Aa Usu Approx. 40 units available!!! 250KG / 0.25t load capacity / lifting capacity – single-fall – 500.- 500KG / 0.5t load capacity / lifting capacity – double-fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Delivered complete with control pendant and load hook Total weight approx. 40 kg, connection to 380V 50Hz TOP condition, fully functional. Not a worn or used-up unit! Just connect and start operating. Comes from ongoing operation. Item location: 75053 Gondelsheim See pictures

Stanje: dober (rabljeno), Leto izdelave: 1973, številka stroja/vozila: 73040, Embossing Press Baier GEBA 1/F, installation height 90 mm, pressing force 800 kg, working area 10 cm x 14 cm, year of manufacture 1973, machine number 73040, in good condition, immediately available. If interested, we are also happy to provide information about other machines available at our facility. Giodpfevt Rpqex Aa Usu You are warmly invited to inspect the machine at our premises by appointment.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication Giodpfxjng Exas Aa Uju • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) Gijdpendn Agofx Aa Uju • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 Giodpsnh R Ekefx Aa Ueu The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance