Mycom F200Vmdd-Ms nakup rabljenega (2.450)

Leto izdelave: 2024, stanje: novo, - 10,000 mm standard length - 800 mm standard roller width - 2.2 kW roller conveyor drive - 0.75 kW feed roller drive - pneumatic roller lifting - pneumatic centering Fsdpfsbrq R Dex Abtsgc

Leto izdelave: 2024, stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW Fgedpfx Aju Izkebtjc infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system

Leto izdelave: 2024, stanje: novo, max. cutting height: 160 mm max. cutting width: 600 mm min./max. edging width: 25-300 mm width adjustment times: 0.2-1.0 sec. feed rate: 5-30 (70) m/min saw motors: 37 kW (higher kW available) feed motor: 2.2 kW saw shaft diameter: 70 mm weight: 3,500 kg Standard equipment: 1 adjustable bushing 1 fixed bushing digital cutting width display automatic cutting width adjustment Optional equipment: electric height adjustment for feed rollers laser with adjustment device driven roller conveyors Fgedpfsu I D Dox Abtsc electronic braking system

Leto izdelave: 2024, stanje: novo, The plant is available immediately! Fsdpfegvu Alsx Abtsgc • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake • Spacious, thermally insulated control cabin • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Leto izdelave: 2024, stanje: novo, - 340 mm maximum cutting height - 70–250 mm maximum cutting width - 500 mm passage width - 6000 mm cutting length - 3–20 m/min feed speed - 2 x 18.5 kW saw motors Fgjdpe E Rg Ssfx Abtoc - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Leto izdelave: 2024, stanje: novo, • 2.5 – 6 m cutting length • 120 – 450 mm maximum cutting height • 80 – 250 mm cutting width • Infeed table with centering rollers • Infeed table with log turning device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers Fsdpfx Asgp Su Esbtogc • Outfeed bridge with 5 pairs of pressure rollers • 650 mm saw blade diameter • 2 x 37 kW bottom saw motors • 2 x 30 kW top saw motors • 6 saw cuts • 4 kW SEW feed gear motor • 5 – 30 m/min stepless feed speed

Leto izdelave: 2024, stanje: novo, - Machine with 3 pairs of feed rollers - Infeed and centering trough - Minimum log diameter: 100 mm - Maximum log diameter: 600 mm - Minimum log length: 2,000 mm - Feed speed: 30 m/min - 5 interchangeable carbide knives - 37 kW debarking motor - 9.2 + 5.5 + 7.5 kW feed drive units - Total weight: 9,000 kg Fodpfx Absfvbphstsgc

Leto izdelave: 2024, stanje: novo, max. cutting length 3,000–8,000 mm min. cutting length 500 mm max. cutting height 80–140 mm infinitely variable feed rate 10–30 m/min saw motor power 4.0–7.5 kW Fgsdpfx Abjxfzletjc feed motor 1.5 kW number of saw carriages 2–6 weight 1,000–2,500 kg

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator -Proizvajalec: MS, ultrazvočni varilni generator -Tip: SoniGEN 35/1000 ali podobno, žal brez natančne oznake -Moč: kVA -Dimenzije: 460/150/V150 mm Fjdpjxxkbaefx Abtsgc -Teža: 5,5 kg

Stanje: dober (rabljeno), Ultrazvočni senzor, Ultrazvočni generator Fjdoxpfa Sjpfx Abtogc - Proizvajalec: MS ULTRASONIC, ultrazvočni generator sonxGEN ADVANCED 20 - Tip: 20 ADVANCED - Št.: 7001480 - Moč: 2,75 kVA - Količina: 1x generator na voljo - Dimenzije: 360/100/H250 mm - Teža: 8,5 kg

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator, ultrazvočna nihajna enota, ultrazvočni pretvornik, ultrazvočna sonotrona, ultrazvočna naprava za varjenje plastike. - Proizvajalec: MS Ultrasonic, ultrazvočni varilni pretvornik, ultrazvočna nihajna enota - Varilni pretvornik: tip 35/1000L - Rog/ultrazvočna sonotrona: glej slike Fgjdpfx Absxywq Detjc - Količina: na voljo 2x ultrazvočna nihajna enota - Dimenzije: 270/110/V55 mm - Teža: 1,7 kg/kos.

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator -Proizvajalec: MS ULTRASONIC, ultrazvočni generator sonxGEN ADVANCED 20 -Tip: 20 ADVANCED Št.: 608883.1 -Moč: 4,4 kVA -Količina: 1x generator na voljo Fsdsxvpflepfx Abtogc -Mere: 360/95/V250 mm -Teža: 8,5 kg

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator, ultrazvočna nihajna enota, ultrazvočni pretvornik, ultrazvočni plastični varilni aparat, ultrazvočni konverter, ultrazvočna sonotroda Fodpsxywr Ijfx Abtsgc - Proizvajalec: MS Ultrasonic, ultrazvočni varilni pretvornik z nosilcem - Varilni pretvornik: tip 20/4000L - Rog/ultrazvočna sonotroda: glej fotografije - Količina: 1x ultrazvočna nihajna enota na voljo - Dimenzije: 450/270/V120 mm - Teža: 13,7 kg

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator, ultrazvočna nihajna enota, ultrazvočni pretvornik – Ultrazvočni varilni stroj za plastiko, ultrazvočni konverter, ultrazvočna sonotroda Proizvajalec: MS Ultrasonic, ultrazvočni varilni pretvornik, ultrazvočna nihajna enota Varilni pretvornik: tip 20/4000L Rog/ultrazvočna sonotroda: glej fotografije Količina: 1x ultrazvočna nihajna enota na voljo Fgodoxvxrhjpfx Abtjc Dimenzije: 440/160/V80 mm Teža: 8,8 kg.

Stanje: dober (rabljeno), Ultrazvočni senzor, Ultrazvočni generator Fjdpfx Abjxpd Nxetogc -Proizvajalec: MS ULTRASONIC, ultrazvočni generator soniGEN ECONOMY 35 -Tip: 35-40 ECONOMY Št. artikla: 7001630 -Moč: 1,1 kVA -Količina: 2x generator na voljo -Cena: na kos -Dimenzije škatle: 360/73/V230 mm -Teža: 6 kg/kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Mycom batni kompresor za NH3, 6 valjev z motorjem 90KW, 1450 obr/min, z oljnim ločevalnikom OSF-250. Hladilna zmogljivost Qo = 265 KW, temp. izp./kond. = -10/+35°C, prostorninski pretok = 326 m3/h. Fgedjxawzcjpfx Abtjc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment - Roller conveyor included - Condition: as new The machine can be inspected and tested if you are interested. Fgedpfstykw Ssx Abtjc If you have any questions, please feel free to contact us.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2515308, skupna masa: 2.177 kg, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 720 mm, proizvajalec motorjev: Mycom, Prenovljen vijačni kompresor Mycom 250VLD 5.8 R717 / Freon. Fjdpfxsx A S Rqs Abtogc

Stanje: novo, Semi-Automatic Bandsaw MACC 320 MS Brand New “CE” Certified Technical specifications sheet attached. Available for immediate delivery, subject to prior sale. Key features of the machine (blade support rigidity, flywheel sizing, blade guides, and blade tensioning system) have been thoroughly engineered to prevent blade fatigue, extend service life, and improve cut accuracy and cutting time. Vertical rotation on pivot with adjustable tapered roller bearings without backlash. Blade drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Fsdpfsfibfaex Abtogc Properly dimensioned flywheels. Robust blade guides made with sealed bearings and adjustable carbide (Widia) pads. Blade tension achieved via electromechanical device with micro-switch controlled blade rotation. Safety devices on flywheel covers, on the control knob, and on the blade to prevent accidents. Cutting thickness: 1.2 mm Cutting range: 0° to 60° to the right Adjustable stop for repetitive cuts. Coolant electric pump 0.06 kW for blade cooling. Operation: Cutting cycle started by pressing the start button, the machine: 1. Closes the vise and starts the blade drive motor 2. Lowers the saw arm for cutting 3. Saw arm returns to the starting position 4. Stops the blade drive motor 5. Opens the vise Manual cutting mode also available. OPTIONAL ACCESSORIES: Single-phase motor 69 m/min Speed variator from 20 to 90 m/min

Stanje: novo, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for high-efficiency, precision cutting of solid bars and small profiles. The robust construction provides the necessary rigidity and precision to the cutting assembly. The blade drive features a dual-speed motor, while the special reduction gearbox is equipped with bronze gears and a hardened, ground worm screw. Appropriately dimensioned flywheels and rugged blade guides with sealed bearings and adjustable carbide (Widia) pads ensure durability. An electromechanical micro-switch control enables blade tensioning via wheel rotation. Safety devices are fitted on the flywheel guard and blade, while a swivel worktable for material support and a quick-approach vise complete the machine. Operation: Cutting cycle is started by pressing the start button; the machine: 1. Closes the vise and switches on the blade motor 2. Lowers the saw bow for cutting Fedpfx Abjfh R Tyotsgc 3. Returns the bow to start position 4. Stops the blade motor 5. Opens the vise Manual cutting is also possible. Cutting speed (m/min): 38–77 Blade thickness (mm): 1.2 Cutting range: 45° left to 60° right Adjustable stop for repetitive cuts Coolant electric pump: 0.06 kW

Stanje: novo, Display promotion. NEW. Nr. 1 unit available for immediate delivery. CE warranty. Fjdpfxog S Ui Ae Abtjgc The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-size profiles, delivering high output and excellent precision. Its robust construction provides the necessary rigidity and accuracy to the cutting assembly. The blade is driven by a two-speed motor and a special gearbox, featuring a complete bronze gear with a hardened and ground worm screw. The well-dimensioned flywheels and robust blade guides are fitted with sealed ball bearings and adjustable carbide (widia) inserts. Blade tensioning is achieved by means of an electromechanical micro-switch that puts the band under tension by rotating the blade. The machine features safety devices on the flywheel covers and the blade, and is equipped with a rotating worktable for material support and a vise with quick-approach device. Operation: Initiate cutting cycle via start button; the machine: 1. Closes the vise and activates the blade motor 2. Lowers the saw bow for cutting 3. Returns the saw bow to the starting position 4. Stops the blade motor 5. Opens the vise Manual cutting option available. Cutting speed (m/min): 38-77 Blade thickness (mm): 1.2 Mitre cutting range: From 45° left to 60° right Adjustable stop for repetitive cuts Coolant pump output: 0.06 kW Cutting capacities: At 0° (Round / Square / Rectangle): 260 mm / 250x250 mm / 220x330 mm At 45° left (Round / Square / Rectangle): 225 mm / 210x210 mm / 160x225 mm At 45° right (Round / Square / Rectangle): 215 mm / 200x200 mm / 160x210 mm At 60° right (Round / Square / Rectangle): 130 mm / 130x130 mm / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight: 415 kg

Stanje: rabljeno, ORT LE60 valjčna polirno-lapirna stroj (valjanje). Stroj je na naši zalogi, priključen na elektriko. Možnost preizkusnega zagona. Nudimo lahko "know-how". Mimu Werkzeugmaschinen. Fgsdpjzbx Dcofx Abtjc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, premer struženja nad ležiščem sani: 200 mm, širina na sredini: 800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 50 obr/min, skupna masa: 800 kg, For sale: A lathe from the manufacturer NARDINI, model MS 175 E. The machine is in good condition. Fodpfx Abezb Iczetsgc Technical data: Manufacturer: NARDINI Type / Model: MS 175 E Machine type: Engine lathe with lead and feed screw Centre height: 175 mm Distance between centres: approx. 800 mm / 1,000 mm (depending on bed length) Swing over bed: 350 mm Swing over cross slide: 200 mm Spindle mount / internal taper: Camlock / MT 5 Spindle bore: approx. 40 – 42 mm Tailstock taper: MT 3 Speed range: approx. 50 – 2,000 rpm (mechanically switchable) Min. speed: approx. 50 rpm Max. speed: approx. 2,000 rpm Feeds & threads: Longitudinal and cross feeds; switchable for metric threads, inch threads, module and diametral pitch. Motor power: approx. 3.0 kW / 4.0 kW Electrical connection: 400 V / three-phase current Total weight: approx. 850 – 1,000 kg Transport and loading can be organised throughout Europe on request and for an additional charge. Prices plus VAT Viewing by appointment possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Stanje: rabljeno, številka stroja/vozila: 688P, Leto izdelave: 2016, obratovalne ure: 507 h, vrsta motorja: Električni, proizvajalec: Paletni viličarji Fgedjzca Eqjpfx Abtjc

Stanje: rabljeno, 5-Axis Turning and Milling Center (Bar Processing) Under power in our warehouse Manufacturer: CHIRON Model: MILL 800 5 axis CNC: Fanuc 18iMBS (5 simultaneous axes 1*) Travel X, Y, Z (mm): 800 – 500 – 550 Rapid traverse (Highspeed): 60 m/min Swivelling head (B axis): +/- 100° Turning spindle: Peiseler Milling head: 12,000 rpm / 140 Nm Tool capacity: 65 - HSK-A 63 DIN 69893 Table size: 1400 x 500 mm Table load: 1200 kg Through-spindle coolant (IKZ): 70 bar (adjustable) CNC-controlled clamping/rotating unit for 6th-side machining (see note 5) Heidenhain linear measuring system Chip conveyor Renishaw-ready Year: 2006 Weight: 7,500 kg Turning package: Max diameter: 65 mm Spindle speed: 15 / 4,500 rpm Max 42.5 kW / 90 Nm Hydraulic clamping: 800 Nm Bar loader ILS-RBK-10012 65 Bar diameter min/max: 5/65 mm; Length: 600–1200 mm Highspeed: 60 m/min Spindle: 20–12,000 rpm – 140 Nm, 12,000 RPM 12.5 kW / Max 34 kW Swivelling head CNC-controlled ±100° Fgedpfxegqg Sge Abtoc Machine under power in our warehouse. Mimu Machine Tools (Italy)