Mokro Izpušnega Sistema nakup rabljenega (1.774)

Stanje: rabljeno, Leto izdelave: 2016, Pregled Kodpfx Agozhaads Usna Ta rotacijski stroj za etiketiranje s hladnim lepilom je bil izdelan leta 2016 pri nemškem podjetju KRONES. Stroj je zasnovan za visokohitrostne polnilne linije za pijače in je opremljen s tremi enotami za etiketiranje s hladnim lepilom za sprednje, zadnje in vratne etikete. Stroj je rabljen in še vedno delujoč. Tehnični podatki - Zmogljivost: približno 33.000 steklenic/uro - Formati: - 0,75 GDB DN2 - 0,5 l pivska steklenica z dolgim vratom - 0,33 l longneck - 0,25 l posamezna steklenica - Uporaba: Etiketiranje steklenic za pijače s hladnim lepilom - Konfiguracija: 2.400-40-188.5, 3 agregati za etiketiranje s hladnim lepilom - Položaji etiket: sprednja stran, zadnja stran, vrat - Integrirani sistemi: sistem za kodiranje Domino, kontrolni sistem Krones Checkmat 731, Plasmatreat za tesnilne etikete

Stanje: rabljeno, Leto izdelave: 2002, Technical details: Rated power: 1670 kVA Rated output: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, such as those often found in industrial applications. It is suitable, among other uses, for stabilizing power supply systems. The UPS unit consists of the Powerbridge (a flywheel with integrated generator) and a Uniblock (electromotor/generator block). The Uniblock supplies power to customer modules without grid faults. The Powerbridge serves as the energy storage unit. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, power supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 seconds. Knjdpfx Aju Nzwuog Usa A diesel engine is connected via a freewheel clutch. This means that, as soon as the engine reaches the speed of the Uniblock, it brings the generator up to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged with energy)

Leto izdelave: 2014, stanje: rabljeno, Ta ponudba je za nosilec sistema 3M Zeta Plus 16EZA Encapsulated System Holder. Enota je v odlično delujočem stanju in je pripravljena za takojšnjo uporabo. Nosilec sistema 3M Zeta Plus je zasnovan za podporo globinske filtracije Zeta Plus in sorodnih procesov čiščenja v biofarmacevtski in biotehnološki industriji ter omogoča optimalno ergonomijo, higieno in učinkovitost delovanja. Posebej je prilagojen uporabi v okoljih z visokimi zahtevami po sterilnosti in pretočnosti. Nosilec podpira uporabo inkapsuliranih filtrirnih kapsul, kar odpravlja potrebo po ohišju iz nerjavnega jekla, in ponuja ergonomsko zasnovo z vrtljivim okvirjem, ki povečuje varnost upravljavca ter olajša menjavo filtrov. Ključne značilnosti: - Vrtljiva zasnova nosilca – Ohišje se lahko obrača med vodoravnim (višina pasu; za nalaganje/snemanje) in navpičnim položajem (delovni način filtracije), kar zmanjša napor upravljavca in minimalizira razlitje tekočin med menjavo. - Ohranjena navpična pot toka – Zagotavlja preizkušeno navpično pot toka, optimizirano za globinsko filtracijo z Zeta Plus filtri ter kompatibilno z 3M polirniki ali kromatografskimi čistilnimi moduli. - Tesnjenje s kontrolirano navorno zategnitvijo – Vgrajen omejevalnik navora zagotavlja pravilno tesnjenje kapsule pred zagonom, kar preprečuje puščanje in nepravilno sestavo sistema. - Inkapsulirana izvedba – Odpravi potrebo po zunanjem ohišju iz nerjavnega jekla, s čimer se zmanjša potreba po čiščenju (CIP) in validaciji v proizvodnji. - Različne izvedbe ohišja – Na voljo v prosojni polikarbonatni izvedbi za vizualno spremljanje nivoja tekočine, ali iz polifenilen oksida, ki omogoča sterilizacijo in dezinfekcijo. - Več konfiguracij pretoka – Podpira načine Bottom-In / Bottom-Out in Top-In / Bottom-Out za optimalno izrabo medijev in učinkovitost filtracije. - Modularna nadgradljivost – Na voljo za pilotske in proizvodne kapacitete, kar omogoča enostavno nadgradnjo iz laboratorijskega v proizvodni obseg v okviru enotnega sistema. Tehnične specifikacije: - Model / št. dela: Housing 16EZA1 - Pot toka: Navpična zasnova, več smeri pretoka - Materiali ohišja: Polikarbonat ali polifenilen oksid (sterilizabilen) - Položaj nosilca: Vrtljiv (vodoravno za nalaganje/snemanje, navpično za filtracijo) - Tesnilni mehanizem: Omejevalnik navora - Obseg delovanja: Od pilotskih do proizvodnih sistemov (0,5 L do >2.500 L) - Kompatibilnost s filtri: Zeta Plus, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC ipd. - Tloris: Kompakten, vertikalni; zmanjšana prostorska zahtevnost v filtracijskih prostorih Uporaba: - Bistrenje sesalskih celičnih kultur pred nadaljnjim čiščenjem
- Zaščita membran in kromatografskih smol z globinsko filtracijo - Bistrenje bakterijskih, kvasnih oz. insektnih celičnih lizatov - Odstranjevanje HCP, DNA, endotoksinov in delcev - (Pre)polirno čiščenje po kromatografiji zajemanja - Postopki za čiščenje virusov v sledilnih bioprocesih Ksdpfsxl Dy Njx Ag Ujna Prednosti in vrednost za uporabnika: - Izboljšana ergonomija in varnost – Vrtljivo ohišje zmanjšuje potrebo po dvigovanju uporabljenih kapsul nad glavo, kar znižuje tveganje razlitij in utrujenosti upravljavca. - Nižja validacijska obremenitev – Popolnoma inkapsuliran sistem ne zahteva čiščenja ali validacije zunanjega ohišja pri naročniku. - Operativna prilagodljivost – Različne izvedbe ohišja, konfiguracije toka in možnost nadgradnje obsega iz pilotnih v proizvodne količine. - Vizualni nadzor procesa – Prosojno ohišje za spremljanje nivoja tekočine

Stanje: zelo dobro (rabljeno), Mettler Toledo T90 Excellence titracijski sistem Proizvajalec / Tip Proizvajalec: Mettler Toledo Tip: T90 Excellence Vrsta naprave: Avtomatski titracijski sistem / Titrator Izdelano v Švici Opis Rabljeni avtomatski titracijski sistem serije Mettler Toledo Excellence. Sistem je primeren za laboratorijske analize, avtomatske titracije, pH-meritve, zagotavljanje kakovosti ter uporabo v raziskavah, razvoju in industrijski analitiki. Tehnični podatki Verzija programske opreme: 4.0.1 Napajanje: +5 V DC / 2,0 A in 24 V DC / 1,5 A Ethernet priključek CAN IN / CAN OUT COM vmesniki PT1000 priključki Priključki za senzorje Priključek za mešalnike in črpalke Oprema Kodpfezc Ic Dex Ag Uena Mettler Toledo T90 osnovna enota Touchscreen upravljalna enota Več dozatorjev / dozirnih modulov Titracijski nastavki in držalo za elektrode Senzorji in elektrode kot na slikah Cevi in priključni kabli Eppendorf škatla z dodatki Testni papir za fluorid Ostali dodatki po slikah Področja uporabe Avtomatske titracije pH-meritve Laboratorijska analiza Zagotavljanje kakovosti Kemijska analiza Raziskave in razvoj Industrijski in preskusni laboratoriji Stanje Rabljeno / Used Vizualno stanje po slikah Običajne sledi skladiščenja in uporabe Vsebina dobave Mettler Toledo T90 titrator Touchscreen upravljalna enota Več Mettler Toledo dozatorjev Titracijski nastavki / držala Senzorji, cevi in kabli po slikah Eppendorf škatla z dodatki Ostali dodatki po slikah Možna dostava ali pošiljanje s špedicijo. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja smo vam na voljo po telefonu.

Leto izdelave: 2020, stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature). Knodocx R Ddjpfx Ag Uea

Stanje: rabljeno, Dematic Conveyor System Accumulation Roller Conveyors Accumulation Roller Conveyor 3000-600-540 RA2361/RA2361.1 Further Information Manufacturer: Dematic Type: Accumulation Roller Conveyor Year of manufacture: unknown Conveyor length (CL): 3000 mm Condition: Good (used) Roller width (RW): 540 mm Nominal/outer width (NW): 600 mm Accumulation zone length: 500 mm Accumulation zone control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Roller diameter: 50 mm Partially rubber-coated for improved grip during braking Drive Module RA2361: Drive type: SEW gear motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optional accessories, e.g.: - Frequency inverter for stepless speed control - Supports - Side guides Ksdpfovyvg Iex Ag Usna Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: kot nova (razstavni stroj), Exhibition machine - Hans Schreiner Extraction System FM350 - 400V - Stock Roitham Technical specifications: Motor output: 5 HP at 100% duty cycle, Voltage: 400 V, Extraction capacity: 4560 m³/h, Chip container volume: 480 l, Main connection: 180 mm, incl. manifold for 4 x 100 mm, Dimensions (L x H x W): 2184 x 2355 x 582 mm, Packaging dimensions (L x W x H): 1180 x 860 x 710 mm, Weight: approx. 145 kg Ksdjvrvr Uepfx Ag Uena Subject to price changes, errors, printing and typographical mistakes excepted.

Stanje: generalkompletno obnovljen (rabljeno), Nudimo servis popravil in zamenjave za vse vrste merilnih sistemov Heidenhain: LS 803, LS 903, LS 303, LS 403, LS 501, LS 503, LS 603, LS 703, LS 106, LS 186, LS 706 LB 325, LB 326, LB 301, LB 381, LB 382 Knedpjq Sahnofx Ag Uea LC 481, LC 483, LC 485, LC 181, LC 183, LC 185 Bralne enote lahko tudi posamezno popravimo ali zamenjamo. Številni merilni sistemi so na voljo za takojšnjo zamenjavo. Vprašajte za vaš tip sistema.

Stanje: dober (rabljeno), Leto izdelave: 2008, moč: 300 kW (407,89 KM), For sale is a high-performance cooling system from manufacturer Cofely, including water treatment, optimized for supplying plastic processing machines (injection molding). The system is in good, operational condition. Its separation into two water circuits (15°C and 22°C) allows for highly efficient cooling of tools and machine components. All pumps were renewed in 2023. Technical data: Year of manufacture: 2008 Pumps replaced: 2023 Cooling capacity: 300 kW Application: Cooling system for injection molding production (up to 20 machines) Temperature circuit 1: 15°C (tool cooling) Temperature circuit 2: 22°C (machine/hydraulic cooling) Control: Central control cabinet in container Evaporator dimensions (LxWxH): 3,500 x 3,500 x 4,500 mm Technical center: Installed in a 20-foot container The system is offered ex-works (self-collection). Dismantling and delivery can be organized for an additional charge. Kedpjyvy Nwefx Ag Ujna Upon request, transport and loading can be organized Europe-wide at extra cost. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be glad to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality but cost-effective metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, širina pometanja: 460 mm, Strojni čistilci za mokro Tehnično stanje: dobro Napetost baterije: 24V Knodpfey I Hnwox Ag Uja

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, širina pometanja: 460 mm, Strojni čistilci za mokro Knjdpfjy I Hnkjx Ag Usa Tehnično stanje: dobro Napetost baterije: 24V

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: nepreverjeno, Offered is a coolant system for emulsion with belt filter. Year of manufacture: 2010 Flow rate: 500 l/min Knsdov N U Ezjpfx Ag Uoa Power consumption: 21.2 kW Further data according to the nameplate.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22924, Izpušni in razpraševalni sistem Dimenzije izsesavanja: Dolžina: 1100 mm Širina: 1100 mm Višina: 1950 mm Dimenzije ohišja filtra: Premer: 900 mm Višina: 1400 mm Dimenzije krmilne omare: Širina: 400 mm Višina: 600 mm Globina: 300 mm Kjdjv Scfuspfx Ag Usna Izpušni in razpraševalni sistem je že demontiran in je pripravljen za prevzem.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Odsesovalna in odpraševalna naprava Višina: 4300 mm Širina: 3000 mm Knodpfx Asxq Epvsg Uoa Globina: 1300 mm Dimenzije spodnjega okvirja: ca. 1750 mm Dimenzije zgornjega dela od prirobnice do pokrova motorja: ca. 2450 mm Zgornja škatla za odvod zraka na pokrovu motorja: ca. 400 mm Odsesovalna in odpraševalna naprava je opremljena z novim motorjem, ki smo ga vgradili septembra 2025. Naprava je že razstavljena in pripravljena za prevzem.

Stanje: rabljeno, Hot runner controller Xintech 16 zones 220 Volt Price: €3,450 Contact person: Mr. Rainer Eckerle Knodpfx Aowgb Icsg Usa

Stanje: rabljeno, Hot runner control unit Vetter MC 712, 12 zones, 230 Volts Price: €2,850 Contact: Mr. Rainer Eckerle Kedswgb T Sspfx Ag Usna

Stanje: rabljeno, Hot runner controller PSG 8, 8 zones, 230 Volt Kodpfx Ajwgb Ngjg Ujna Price: €2,250 Contact: Mr. Rainer Eckerle

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wurster & Dietz edger and trimming machine Type FR7 with in-machine adjustment Kodpfx Aev I D Shjg Ujna Star-delta soft start Infeed roller table Single-layer spiral roller slab separator Slab discharge into roll-off trolley Main material on pull-off roller table

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. On request, the machine can be offered fully refurbished. Knsdjtq Twvspfx Ag Uea

Stanje: novo, skupna višina: 3.500 mm, skupna dolžina: 7.000 mm, skupna širina: 4.000 mm, volumenski pretok: 26.000 m³/h, trajanje garancije: 12 meseci, notranja višina: 2.700 mm, notranja dolžina: 6.900 mm, notranja širina: 3.900 mm, delovna višina: 2.700 mm, Oprema: dokumentacija / priročnik, kabina, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top service – Fast delivery – Reliable support ⚡ ✈️ Plus shipping costs – Shipping available on request ⏰ 48H EXPRESS DELIVERY available after down payment! Standard delivery time varies depending on stock between 1 business day and approximately 15 weeks. 🔧 Please note: Additional options may extend the delivery time. 📩 Please contact the seller in advance to check if your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest smart! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard cabin sizes are usually in stock and available at short notice. 📌 If you require larger painting areas, we can combine standard cabins modularly to create custom solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 High-end wet paint booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Features: Kjdpfoipvulox Ag Uena 🌬️ Vertical airflow across a full-surface ceiling supply plenum – for even, dust-free painting 🚪 3-leaf main gate with viewing windows + service door with emergency locking for overpressure 💡 Shadow-free, heat-resistant, and compliant lighting ♻️ Recirculation system with controllable fresh air damper – rapid heating to 60–80 °C in 8–15 min 🔇 Low-noise high-performance fans with constant airflow (0.30 m/s) 🛡️ Light overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 High-end filtration technology: ✅ Prefilter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full management of ventilation, heating, lighting, and safety – easy and compliant 🖲️ Optional touchscreen operation available 🧱 Flexible air handling units – can be installed on the right, left, or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic gates – fully glazed 🧱 Roof with additional insulation 🎨 Integrated paint mixing station 🌈 Color selection: Any RAL color possible (Standard: blue, white, orange, red, grey) 💡 Explosion-proof lighting (Ex-proof) 🌪️ Explosion-proof fan (Ex-proof) 🖥️ Touchscreen control ⚠️ Selection of special equipment may extend the delivery time. Please coordinate your options in advance with our sales team. 🚧 Installation costs are not included in the price. 📍 These depend on your location – we are happy to provide an individual quote! ☀️ 2-YEAR WARRANTY – Safety first! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional paint shop technology with over 40 years of experience.

Stanje: novo, These units are made of galvanized sheet metal and are designed for complete bolt assembly. This takes up very little space during shipping. The extraction system is developed separately and specifically for each booth, ensuring optimal extraction performance. Thanks to the extraction, personnel applying wet paint are not affected or disturbed by paint fumes. In Elboy Wetline-KF wet paint booths, environmental pollution is prevented by using a combination of accordion, cartridge, or roll glass fiber filtration systems. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter located at the rear of the booth. Ksdpfxody Dv Ds Ag Uena Any residual wet paint particles not retained by the accordion filter are captured by the fiber filter at the rear. The door system can be mounted in various ways at the front entrance. UV lamps can be installed in the cabinet to inspect the painting process.

Stanje: novo, ✈️ Plus shipping costs – delivery upon request available.✈️ Fast delivery: only 4–6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – delivered fully assembled, ready for immediate use! ✳️Preserve your liquidity! We offer a variety of financing models to ensure your investment achieves the greatest success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ☘️Eco-friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – efficient. Eco-friendly. Safe. The future of surface processing begins here: with wet blasting solutions from Proton Maschinenbau GmbH, you choose uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully-automatic systems – our equipment guarantees precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting units combine water, compressed air, and a suitable blasting medium into a highly effective cleaning process, offering clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to integrated jet-pulse filter system ✔ Homogeneous, contamination-free surfaces – without chemical additives ✔ Gentle processing of sensitive materials, without embedding blasting media ✔ Optimal results for degreasing, paint stripping, texturing, and cleaning ✔ Energy- and resource-efficient process, suitable for a wide range of blasting media ✔ Ideal for demanding sectors such as aerospace, medical technology, automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blast cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for wheel processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotary platform, wash table, and transport trolley All machines feature: 🔧 Stainless steel housing with laser-welded seams 🖥️ Intuitive PLC touch panel with programming & maintenance instructions Knodswdpq Hjpfx Ag Uoa 💡 LED interior lighting, safety features & automated media recirculation Areas of application: cleaning of aluminium or plastic moulds, deburring of precision components, preparation of implants or prototypes from additive manufacturing—for every application, we offer the right solution. Proton stands for: 2-year warranty on manufacturing quality, 10 years of spare parts availability, personalised consultation, and robust systems "Made in Germany". 👉 Discover the advantages of wet blasting technology now—and reach a new level of surface finishing.

Stanje: rabljeno, Labelling capacity: approx. 3,000 bottles/hour. Formats: 0.75 l bottles of various sizes, equipped with: - Two (2) self-adhesive labelling units for applying a front label and a back label on cylindrical or shaped glass bottles - Two (2) wet glue labelling units for applying a front label, a back label, and a neck band on cylindrical glass bottles Label length: 10–195 mm Label height: 10–180 mm Container diameter: 40–130 mm Container height: 140–380 mm Maximum output: 3,500 bottles/hour Installed power: 4 kW - Complete with frame and doors made from stainless steel AISI 304 - Automatic speed regulation - Head height adjustment via touch-screen display Kjdpfx Agjxyt D Ts Usna - Optical orientation using a mark on the capsule detected by sensors at each station, with plate rotation via stepper motors - Four (4) quick-change bottle plates - Two (2) labelling heads for self-adhesive labels, Model MAK-AN, 50 m/min, mounted on movable stations on the machine’s frame - Two (2) labelling units on 4 axes, adjustable via handwheel and digital position indicator - Electric control cabinet, water-resistant, made from stainless steel AISI 304 - Machine control via PLC and touch-screen display Technical details: - Operating direction: rotary, clockwise, left-right - Output bottles/hour: 5,200 - Labels: self-adhesive labels, cold glue paper labels - Number of labelling stations: 4 - Number of bottle plates: 4 - Orientation: optical orientation using photocell, bottle plate with stepper motor - Motorised height adjustment: yes - Speed adjustment: frequency converter

Stanje: pripravljen za uporabo (rabljen), * Znamka: Metso /CFBK * Model: sejalnica za mokro sejanje * Na zalogi: 2 kosa * 1x Tip: 20/60-3 * Površina: 6000 x 2000 mm – 3 nivoji. * vključuje: vzmeti in 22 kW električni motor. Knodeyymydspfx Ag Uoa * 1x Tip: 17/50-3 * Površina: 5000 x 1700 mm – 3 nivoji. * vključuje: vzmeti in 15 kW električni motor.

Stanje: dober (rabljeno), Leto izdelave: 2007, VRTALNI STROJ Delovno območje: V630/1000M Min. / maks. višina: 10 – 450 mm Min. / maks. širina: 60 – 1.050 mm Maks. teža pozicioniranja: 9.000 kg Število vrtalnih enot: 3x Avtomatski menjalec orodij: 3x (3x 5 pozicij) Merjenje višine: Vključeno Merjenje širine: Vključeno Teža stroja: 12.000 kg Merilni sistem z valji za pomik Maks. hitrost: 42 m/min Min. dovodna dolžina: 1.500 mm Vrtalna enota: VD40 Pomik in pozicioniranje: servo-motorji s servo-invertorji Obrati vretena: brezstopenjsko 100 – 2.500 min⁻¹ (servo-motorji) Mazanje: notranje z meglo zraka / olja Vpenjalni stožec: SK 40 Premer svedrov za olje-cevne svedre: 8 – 40 mm Premer svedrov za karbidne svedre: 13 – 32 mm Rezkanje navojev: M8 – M24 Možnost označevanja izvrtin: Da, na 3 straneh ŽAGA Žaga: VB1050 Kapaciteta (višina x širina) 0°: 500 x 1.130 mm Knodpfxsvpafyj Ag Uea Kapaciteta (višina x širina) +/- 15°: 500 x 1.060 mm Kapaciteta (višina x širina) +/- 30°: 500 x 925 mm Kapaciteta (višina x širina) +/- 45°: 500 x 725 mm Kapaciteta (višina x širina) +/- 60°: 500 x 470 mm Brezhitrostno pomikanje traku: 40 – 120 m/min Motor žaginega pogona: 7,5 kW Dimenzije žaginega traku: 9.550 x 54 x 1,6 mm Hidravlično napenjanje traku: 48.000 N Teža stroja: +/- 8.500 kg