Mbo K76 - 4 P Kz nakup rabljenega (82.344)

Stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x Pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Bracket: 4 hooks Design: Head beam Clear span: 2,695 mm 02x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams Note: The beam was cut flush at the bracket to become a head beam. No information can be given regarding the compartment load capacity. Currently in stock: approx. 148 pcs. Hsdpetiv H Hsfx Abnenr Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the article: This item is only offered for collection. Any additional transport or shipping of this item is subject to extra charges, which can be provided individually depending on delivery location and scope.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, širina dovoda: 740 mm, MBO K 74/4 KL folding machine with flat pile feeder. Paper size: min. 15x25 cm to max. 74x112 cm Speed: 30–150 m/min Hnsdstvfqwjpfx Abnjr Equipped with delivery belt and compressor. Fully functional, test runs possible. Folding rollers replaced in 2017.

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm Hjdpolthgusfx Abnjnr * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: dober (rabljeno), številka stroja/vozila: X02/22, Stroj za zgibanje MBO T530-1-53/4 F, 4 žepi, števec, kompresor, drugo zgibalno postrojenje s 4 žepi, 1 nož, številka stroja X02/22, v dobrem stanju, takoj na voljo BREZ ODVOZA Ob interesu vas z veseljem obvestimo o drugih strojih pri nas. Vabljeni ste, da si stroj ogledate v naših prostorih po predhodnem dogovoru. Hsdpfx Asxdhv Ejbnsnr

Stanje: dober (rabljeno), Folding machine MBO T49/4, machine number 83067246, 4 fold plates + delivery, flat pile feeder, counter, in good condition, immediately available. Hnjdpfxshb Ep Ie Abner If you are interested, we are happy to inform you about additional machines available in our facility. You are welcome to inspect the machine at our premises by prior appointment.

Stanje: rabljeno, Leto izdelave: 2005, Folding Machine MBO K 800.2/4 SKTL MWK Year of manufacture: 2005 Description: - 16-page folding machine - MBO Navigator control Feeder - Pile feeder - Without pump Folding Unit MBO K 800.2/4 SKTL MWK Hnsdpfxjtczixe Abnjr - Parallel folding unit with 4 folding pockets - Perforating shaft - First cross fold - Pocket folding below first cross fold - Second cross fold to the left - Second cross fold to left and right - Noise reduction cover across the entire folding unit - Delivery system not included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Technical data: 4 folding pockets Hodpfxolfgcwe Abnjnr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, MBO folding machine K76/6 KTL, year of manufacture 2003 Round pile feeder First folding unit with 6 folding pockets + one upstream folding roller Prepared for gluing Downstream knife shaft Hnsdpfovyaqqex Abner K-section 2 folding swords Horizontal pocket Horizontal delivery FA 66/ME Pump

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, širina dovoda: 720 mm, Bidding obliges the buyer to collect the equipment by the deadline of 31.12.2025! Hjdjxyhnyspfx Abnonr The offer includes: - MBO R 700 Feeder (Serial No.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial No.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial No.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial No.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Stacking Delivery (Serial No.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial No.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial No.: 033, Year: 1997) - MBO Delivery System for 3-Up Operation SAP 66-ME (Serial No.: 910913362) - Polar L-1000-W-3 Pallet Scissor Lift Table (Serial No.: 6072421) TECHNICAL DETAILS Fold Plates: Fold plates in 1st unit: 6 (separately driven, removable sheet transfer) Fold plates in 2nd unit: 6 Fold plates in 3rd unit: 2 Feeding Width: Feeding width 1st unit: 720 mm Feeding width 2nd unit: 720 mm Feeding width 3rd unit: 520 mm The machine includes an altar fold plate (usable in units 1 and 2), two separate sheet diverters, and one auxiliary frame for setup. Units 2 and 3 are electrically height-adjustable! Note: The MBO delivery unit is defective.

Stanje: rabljeno, Leto izdelave: 2014, Falzmaschine Hnedjyzdt Dopfx Abner MBO T700/4 Leto izdelave: 2014 Opis: - 4-stranična zgibanka - MBO Navigator Podajalnik - Krožni skladiščni podajalnik: R 700 - Črpalka Taschenfalzwerk: 1 MBO FP 10 - Samodejna nastavitev zgibalnega žepa - Prva zgibalna enota s 4 žepi Kaseta z rezalnimi valji - Perforirni valj - Naprava za dušenje hrupa - Ekskluziven izložni trak

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Taschenfalz stroj T500/4 brez drugega zgibnega sklopa, brez izhodnega zlagalnika Hnjderqf Sxjpfx Abner

Stanje: rabljeno, Leto izdelave: 2008, Falzmaschine MBO K 800.2/4 S KTZ Letnik: 2008 Opis: - 16-stranska zgibanka - MBO Navigator Podajalnik - Krožni skladalni podajalnik: R 800 Zgibalna enota MBO K 800.2/4 S KTZ - Paralelna zgibalna enota s 4 zgibalnimi žepi - Druga prečna zgiba levo in desno - Zvočno izolacijska oprema po celotni zgibalni enoti Ekskluzivni izhod Hsdpfxsychzts Abnenr

Stanje: novo, največja dovoljena obremenitev: 45.250 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our entire range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis, cranked: * Special steel frame made of high-strength fine-grain steels, electrically welded at connection points * Well-dimensioned outer frame, 4-axle configuration * Wheel coverings above the axles with spray mist suppression * All steel parts shot-blasted * Side underride guard made of anodised aluminium, installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special configuration in the cranked area for maximum low bed length, combined with AluLeg drop-down supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension: * DINKEL special body construction * Self-supporting aluminium roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions can be extended for loading and unloading to approx. 4,200 mm * Three sliding stanchions per side with spring-assisted lifting * Additional central stanchion locks in the roof rail and parked position by pull cable and spring bolt * DINKEL mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable on both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with adjustment in the stanchions * Front cover at the bulkhead for driving under tarp, total height up to approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on the side, lower 450 mm pockets, above that 4 rows of individual pockets. In the raised bed, only 3 rows of plug-in slats, with uniform spacing Floor: * Approx. 27 mm special waterproof bonded beech plywood, slip-resistant surface * Steel sheet in wheel arch areas, forklift-rated to DIN standard * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EC regulation 71/320 EEC incl. PREV (parking-release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator * Incl. WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-bed configuration * Air suspension with lifting and lowering system, total travel approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical locking Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. spare wheel holder * without spare wheel Lighting: * As per EC regulation, incl. LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights in the front wall, inside, at the top Hnedewx Dbijpfx Abner Paintwork: * Chassis and body in single colour RAL 3002 Carmine Red * Central stanchions, axles KTL coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operation on the trailer * Oversize signage at front and rear in galvanized, continuously telescopic version with mounted contour lights including plug bases for beacon lights (small panels) * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, to lock central stanchions as required * PVC sliding tarpaulins, colour similar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VVE/17636, Z07/78, MBO T530-1-53/4 F zgibanka - ravno skladišče za vlaganje, črpalka in dodatki - 4 žepi Hjdpfx Aoxwpqdebnjnr

Leto izdelave: 1991, stanje: zelo dobro (rabljeno), številka stroja/vozila: 61861201, Flatpile, Vaculift, Vacubelt, DV-pomp, shingles transportband, MCC1-teller Hjdpfjhqhg Ajx Abnonr Machinenummer: 61861201

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Ponudba brez obveznosti 1) Kombinirana zgibanka Proizvajalec: MBO Model: K 800.2 S-KTL-Aut. Format: 78 x 120 cm Leto izdelave: 2009 Oprema: - Avtomatska kombinirana zgibanka MBO K 800.2 S-KTL - Dovajalna paletna postaja K8 - FP120 - Separacijska glava VACULIFT - Možnost natovarjanja dovajalnika z obeh strani - Višina kupa pri dovajalniku: 120 cm - Poseben podajalno-poravnalni sistem VIVAS - 1. zgibalna enota = 4 kombinirani zgibni noži (iz nerjavečega jekla) - Zadnja nameščena nožna gred - KTL navzkrižna zgibalna enota z 2 pnevmatsko gnanima visokohitrostnima zgibnima nožema - Eno ležeče vodilo za papir po prvem nožu - Zadnja nožna gred po ležečem vodilu - Samodejna nastavitev zgibnih in preklopnih nožev - NAVIGATOR upravljalnik z zaslonom na dotik za vse funkcije, nastavitve in prednastavitvene možnosti Hsdpfx Abjy I Txvenonr - RAPIDSET osnovno krmiljenje, vključno z motorizacijo vseh kombiniranih zgibalnih žepov - Protizvočni pokrovi in zaščite na vzdolžnem in prečnem zgibu - Potrjen in brez vzdrževanja, ekonomičen in tih pogon z jermenom - Dobavni izhod Palamides Alpa 500 - Poseben kompresor - Dodatna oprema, tehnična dokumentacija - Stroj je v odličnem stanju! Cena po dogovoru Na voljo več slik in video.

Stanje: pripravljen za uporabo (rabljen), MBO zgibni stroji MBO ET46 prevrtilni obračalnik - 1983 Hnodpfxoir A Imj Abner

Stanje: rabljeno, Leto izdelave: 1998, Štiristranska strojna hoblovka Proizvajalec: Weinig Tip: P 23 E Letnik proizvodnje: 1998 Tehnični podatki - Širina obdelave: 230 mm - Višina obdelave: 8–120 mm - Število vreten: 5 (zgornje, desno, levo, spodnje, zgornje) - Število vrtljajev vreten: 6000 vrt/min - Hitrost podajanja: 5–24 m/min - Skupna priključna moč: približno 25 kW - Dolžina podajalne mize: približno 2000 mm - Teža: približno 2500 kg Hodpezuzfusfx Abnsnr Opomba: Tehnični podatki in opisi so kopije takratne potrditve naročila. Podatki so namenjeni samo informativnim namenom in niso zavezujoči.

Stanje: pripravljen za uporabo (rabljen), ABB Robotics 2 x PS 60/4-50-P-LSS-3985 kombinacija servomotorja SN:910.8090020-063 / 910.8090020-029 , strokovno popolnoma obnovljeno in preizkušeno z 12-mesečno garancijo, 100% delujoče, obseg dobave po fotografijah. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Cena na zahtevo! Hjdpoi D Eycjfx Abnonr

Stanje: rabljeno, Ponudba vključuje: MBO stroj za zlaganje T520-2-52/4 Hnjdpfxezpwhhe Abnor Število žepov/rezil: 4 žepi 2 rezila Celovit paket brezskrbnosti Poskrbimo za vse: od varne embalaže, transporta do carinskega postopka. Po želji vam pripravimo tudi prilagojeno ponudbo za lizing. Trajnostno in ekonomično Odločite se za rabljeno napravo in uživajte v dvojni prednosti: varujte okolje in prihranite pri proračunu. Kljub morebitnim sledovim uporabe, boste prejeli kakovosten izdelek po privlačni ceni.

Stanje: pripravljen za uporabo (rabljen), Table diameter: 1000 mm, tool height: 80 mm, sealing pressure: 1.6 t, number of stations: 4, connected load: 3 kW, including tooling, machine has seen very little use. Hnsdpfxjif Elgj Abner

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 6.054 h, nosilnost: 4.000 kg, dvižna višina: 3.700 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.900 mm, moč: 55 kW (74,78 KM), dolžina vilic: 1.200 mm, lastna masa: 7.025 kg, skupna dolžina: 3.658 mm, vrsta pogona: Diesel, gradbena širina: 2.060 mm, Terenski viličar Težišče tovora: 500 Razred ISO: Razred ISO 3 = 2.500 – 4.999 kg Vrsta masta: Teleskopski Prenos: Hidrotransformator Stanje: Pripravljen za uporabo in v celoti funkcionalen Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Zračne Sprednje pnevmatike, velikost: 18x19,5 Zadnje pnevmatike, tip: Zračne Zadnje pnevmatike, velikost: 10x17,5 Opis: Poleg tega aparata ponujamo tudi druge viličarje in opremo za skladiščenje. Naši aparati so bili pregledani v servisnem centru in v skladu s standardom FEM4.004. Prosimo, da nas kontaktirate po e-pošti ali po telefonu. Najdete nas tudi na spletni strani hsr-gabelstapler. Seveda odkupujemo tudi vaše rabljene aparate, tudi če pri nas ne kupite novega vozila. Najem z možnostjo odkupa in financiranje po ugodnih pogojih sta na voljo po dogovoru. Z veseljem vam bomo nudili strokovno in izčrpno svetovanje glede naših vozil. Bočni premik, 3. ventil, zadnja delovna luč, sprednja delovna luč, grelec, filter za trdne delce, popolna kabina, notranje ogledalo, zunanja ogledala, brisalci, en sam pedal, sedež. Hodezrir Djpfx Abnonr

Stanje: dober (rabljeno), Vitelna vrv, žerjavna vrv, dvižna vrv, jeklena vrv, nerjavna jeklena vrv, gozdarska vitelna vrv -Žerjavna vrv: Demag jeklena vrv Ø 16 mm -Dolžina: 35,0 m .: P 600 H13 4/1 589 440 44 -Tip vrvi: IWRC U(bk) -Na voljo tudi druge žerjavne vrvi -Transportne mere: Ø 420 x 155 mm -Teža: 37,9 kg Hnsdozh Ehgjpfx Abnor

Stanje: rabljeno, Stahl KC 78/4-KZ stroj za savijanje (Round Pile Folding Machine) za 16 strana u poprečnom savijanju Falzmaschine / Stroj za savijanje papira Stahl KC 78/4-KZ 16-strani stroj za savijanje / Poprečno savijanje za 16 strana Godina proizvodnje 1988 - Serijski broj 36526/88-148099 Maksimalna radna širina 780 mm / Maksimalna širina rada 780 mm Okružni ulagač papira / Okružni ulagač (Round Pile Feeder) 1. stanica 4 džepa / Prva jedinica za savijanje 4 džepa 2. stanica 3 noža (izlaz lijevo ili desno) / Druga jedinica za savijanje 3 noža (dostava lijevo ili desno) Kaskadni izlaz (Schuppenauslage) / Stremljeni izlaz Stahl SAK Uključuje kompresor i priručnike Prednje i zadnje postavljene rezačke osovine / Prednje i zadnje rezne osovine Online video inspekcija putem WhatsApp - MS Zoom - Telegram Na stanju Emskirchen/Nürnberg - Dostupan odmah - Mogućnost testiranja Hedjxlr Afspfx Abnjnr

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 103638, Folding Machine / Falzmaschine Heidelberg Stahlfolder KD 78-4-KZ, Year 1999 - Serial No.: 103638-258036 - Maximum working width: 780 mm - Round pile feeder - First station: 4 folding pockets - Second station: 3 folding knives, left/right delivery - Delivery stacker: Stahl SBP 46 - Rietschle compressor - Manuals included - Online video inspection possible via Skype We would be pleased to welcome you for a viewing—more machines available from stock. Available immediately – machine can be inspected and tested on site. Located in Emskirchen / Nuremberg – ready for demonstration. Hnedpfx Ajmikq Asbnsr