Kk-Industries Pk-35 Single Speed nakup rabljenega (71.206)

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Lodpfxjwzzzfj Akhjru Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Pressure: 160 Bending length: 3200 mm Frame gap: 2655 mm Installation height: 400 mm Motor: 11 kW Max. ram stroke: 200 mm Repeat accuracy: 0.015 mm Positioning accuracy: 0.10 mm CNC press brake KK Industries 160x3200, 4 axes Y1-Y2-Y-X-R with CNC crowning Standard equipment: - Robust construction for high stability and precision. - CNC axes: Y1, Y2, X and R axis for precise control and accurate bending operations. - CNC-controlled, motorized crowning system for exact adjustment. - CNC control ZY 68 by the manufacturer (similar to Delem), user-friendly interface and high flexibility. Lrsdsv S Npyspfx Akhju - Backgauge with linear guides and ball screw drive, equipped with 4 stopper fingers for precise material positioning. - 2 sheet support arms for ergonomic material handling. - Laser safety device on the upper beam to ensure operator safety during operation. - Quick-clamping system for the top tool enables rapid and simple tool changes. - Top tool system: Promecam Amada, split and goosenecked for maximum flexibility. - Multi-V die system: Both Promecam and Amada systems compatible. - CE safety equipment, complies with all relevant safety regulations. Optional: Delem T53 control (surcharge: €5,000)

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Lodpfxed Aca As Akhsru Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Maximum stroke length: 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Approx. weight: 14,000 kg CNC Press Brake 3200 mm x 200 to Standard equipment: ----- Robust construction CNC axes: Y1, Y2, X, and R axis CNC-controlled motorized crowning system Original DELEM DA-58T CNC control, 15-inch touchscreen Back gauge with linear guide and ball screw, with 4 stop fingers 2 sheet supporter arms Laser safety device on upper beam Quick-clamp system for upper tool Ljdpfx Aotvhxiokhjru Upper tool system: Promecam/Amada segmented, gooseneck design Multi-V die system, compatible with both Promecam and Amada systems CE-compliant safety equipment

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg Motor: 15 kW CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X and R axis CNC crowning system, motorized and CNC controlled CNC controller Original DELEM DA 58 T touchscreen, 15-inch Backgauge with linear guide and ball screw with 4 stops 2 sheet support arms Laser safety device on the upper beam Quick clamping system for upper tool Tool system upper tool Promecam Amada, segmented and gooseneck Multi V-die system, both Promecam and Amada compatible Lredpfxotq Nm Ns Akhou Safety equipment Our machine features an Ecoline mode, which allows energy consumption optimization to save costs, and the machine operates very quietly.

Stanje: novo, Dolžina pločevine: 1360 mm Debelina pločevine: 3 mm Standardna oprema: - NC krmiljenje - Programabilni, motorizirani zadnji prislon z gibom 750 mm - Osvetlitev sence rezalne linije Lodpfx Ajxx D Efekhsru - 1 kos prislona z mersko lestvico - 2 kosa podpornih ročic za pločevino - Zaščita za prste - Kroglična valjčna miza - Enostavna nastavitev reže rezila od spredaj - Kroglično vreteno - Števec rezov - Prenosna nožna pedala z gumbom za izklop v sili - Svetlobna pregrada na zadnjih varnostnih napravah

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls Lrodpfx Ajd Ab H Njkhou - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Pressure: 135 Bending length: 3020 mm Frame width: 2555 mm Installation height: 550 mm Max. stroke length: 320 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2250x2835 mm Weight approx.: 9300 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller) CNC crowning via controller: Yes, via Esa S630 (2D graphic controller) Motor power: 15 kW Technical Specifications XL 30135 Unit Bending length: 3020 mm Bending force: 135 t Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation / clear height (E): 550 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front stop (Y): 1720 mm Maximum height: 2835 mm Main motor: 15 kW Oil tank volume: 190 l Machine weight: 9600 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height and, as a result, a generous cylinder stroke. Likewise, the throat depth is above average to ensure minimal restriction. We focus on quality, which is also reflected in the controller. As standard, our high-quality Esa S640 (2D graphic controller) is included. Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Naturally, CNC crowning with the Esa S640 (2D graphic controller) is also included. We make no compromises on the top tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we place a strong emphasis on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic controller) Backgauge with double linear guide and ball screw spindle Motorized crowning device with CNC control 2 heavy-duty front support arms with height adjustment via handwheel; heavy-duty linear guide version from 175 tons upward Laser safety device on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller – €4,520 incl. Lsdpfsd Ehinsx Akhsru ESA 675 W 3D 21'' touchscreen controller (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Sheet thickness: 35 Bending length: 4100 Top roll diameter: 540 Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In accordance with CE standards Options: Lrodpfx Aksd Ab N Iehsu - Variable rotation speed: EUR 6,940 - Material feed table: EUR 5,100 - Oil cooler: standard - Central support: EUR 18,750 - Side supports: EUR 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requests) We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 35 mm Top roll diameter: 430 mm Lsdpsd Ab Stjfx Akhsru Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 5,858 - Material feeding table on request - Oil cooler: standard - Central support: EUR 13,600 - Side supports: EUR 12,000 We have numerous references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm - Motor power: 15 kW - Length: 3,800 mm - Width: 1,820 mm - Height: 1,920 mm - Weight: 7,700 kg Features: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on pivoting arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - 1,000 mm foldable finger guard - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy blade replacement and regrinding - Adjustable cutting length for economical processing Lrjdpsvap Thefx Akhou - Bottom blade with 4 cutting edges - Top blade with 2 cutting edges - Qualified after-sales service - Operating manual in ENGLISH - Machine and equipment compliant with CE regulations

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Ljdstvhxmopfx Akhjru Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X, and R CNC crowning device motorized with CNC control Original DELEM DA 58 T 15" touchscreen CNC control Backgauge with linear guide and ball screw, 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tooling Upper tool system: Promecam Amada segmented and gooseneck Multi-V die system compatible with both Promecam and Amada systems CE-certified safety equipment

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm - Motor power: 22 kW - Length: 3,800 mm - Width: 1,950 mm - Height: 2,080 mm - Weight: 10,600 kg Equipment: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via the control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on swiveling arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - Foldable finger guard, 1,000 mm - 1 T-slot side gauge - 2 sheet support arms with T-slot Lredpfx Asvap Tnjkhou - Easy blade change and regrinding - Adjustable cutting length for economic processing - Lower blade reversible on 4 sides - Upper blade reversible on 2 sides - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing beam design NC preselect controller ELGO P 40 T with backgauge and blade gap adjustment directly from the control panel motorized backgauge up to 1,000 mm clearly arranged control panel mounted on a swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch blade gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easily replaceable and re-grindable blades adjustable cutting length for economical operation bottom blade with 4 cutting edges upper blade with 2 cutting edges qualified after-sales service operating manual in ENGLISH Machine and equipment in accordance with CE regulations Lredpfxjvap Tus Akhsu

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Lsdpfx Aksd Ab Hyehoru Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending Lrsdpfx Akod Ab H Rehsu - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Pressure: 60 Bending length: 2550 mm Distance between housings: 2100 mm Installation height: 550 mm Stroke (max.): 270 mm Throat depth: 450 mm Dimensions (LxWxH): 3220 x 2250 x 2560 mm Weight approx.: 5200 kg Motor power: 5.5 kW Standard equipment: KK-Industries has participated in production and is now manufacturing press brakes and guillotine shears based on its own concepts. We have assembled a high-quality model for the European market. The CNC press brake KLETZER Maxima-EUROPA XL, made in Turkey Model: KLETZER Maxima-EUROPA XL The powerful KLETZER Maxima-Europa XL press brake stands out for its high precision, accuracy, and versatile range of applications. The KLETZER Maxima-Europa XL offers a very large installation height and correspondingly large stroke (cylinder travel). The throat depth is also above average, resulting in minimal limitations when handling various workpieces. We insist on quality, which is also reflected in the control system. As the standard control, we have installed a high-quality Italian 10 2 D controller, which is exceptionally easy to program. Additionally, the KLETZER Maxima-Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the controller. We also make no compromises with the upper tool and die, equipping the KLETZER Maxima-EUROPA XL CNC press brake with premium quality tools from EUROSTAMP Italy or Rolleri Italy. Lrodpfxjd I Anns Akheu A machine is only as good as its service, which is why we focus on highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: 2D Top tool: 135.75.R08 Bottom tool: 4V 60x60 85° Backgauge with dual linear guides and ball screw drive Motorized crowning device with CNC control 2 heavy duty front support arms, height-adjustable on linear guides Laser safety device on the upper beam CE safety equipment Various options available MAXIMA 2560 TECHNICAL DATA Type: MAXIMA 2560 Bending force (ton): 60 Bending length (mm): 2550 Distance between columns (mm): 2100 Stroke (mm): 270 Daylight (mm): 550 Throat depth (mm): 450 Motor power (kW): 5.5 Approach speed (mm/sec): 140 Bending speed (mm/sec): 10 Return speed (mm/sec): 120 Travel in X axis (mm): 650 Crowning: Manual Height (mm): 2560 Width (mm): 2250 Length (mm): 3220 Weight (kg): approx. 5200 KK-Industries GmbH There is something for everyone!

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Lredpfod Ab Hzjx Akhsu Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Lrjdpfxjd Ab H So Akhsu Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: rabljeno, Leto izdelave: 2017, Rabljen industrijski robot Yaskawa MH-50-35 v dobrem stanju z upravljanjem DX100. Lrsdpfxjzia Hgj Akhou

Leto izdelave: 2021, stanje: rabljeno, Linija za proizvodnjo cevi Proizvajalec: Bazhou Wanxin Industrial and Trading Linija za proizvodnjo cevi, sestavljena iz: Naprava za odvijanje z dvojnim delovnim mestom Funkcija: Pasivno odvalja kolut Izvedba: Izvedba z dvema delovnima mesti in rotacijo za 180 stopinj, ročno nastavljanje Prednosti: hitro nalaganje, enostavno in priročno upravljanje Hidravlične škarje in strojna postaja za varjenje koncev Funkcija: Reže prednji in zadnji del, centriranje cevi in ponovno varjenje Izvedba: Ročne hidravlične škarje z iztegom, prednji in zadnji pritiskalni valji, prednji in zadnji centrirni valji, varilna naprava Način rezanja: hidravlične škarje Način oblikovanja z uporabo preše: dvojna cilinderska preša Način varjenja: ročno varjenje Naprava za shranjevanje trakov Funkcija: Za zagotovitev neprekinjene proizvodnje varjene cevi je treba po škarjah in varilni postaji namestiti shranjevalno enoto, da lahko shranjevalnik neprekinjeno dovaja trakove, medtem ko se material iz jeklene pločevine pripravlja za polaganje, odvijanje, rezanje koncev in varjenje. Izvedba: tip okvirja, obstajajo premični okvirji in fiksni okvirji (vključno z napravo za dovod) Hitrost dovoda: maks. 120 m/min Hitrost skladiščenja: maks. 200 m/min Dolžina skladiščenih trakov: 200 - 400 m Motor stiskalnega valja: AC 11 kW Stroj za oblikovanje in kalibriranje Višina delovne mize: +850 mm Moč: motor AC/DC: 160 kW, 1000 - 2000 vrt/min Reduktor: utrjevanje zobnika Razporeditev: Pasivni stroj za izravnavo s petimi valji, navpični valji za dovod materiala, oblikovanje z 7 horizontalnimi valji in 8 navpičnimi valji, vodenje, stiskanje, odstranjevanje ostrih robov, hlajenje in kalibriranje z 6 horizontalnimi valji in 5 navpičnimi valji, 1 kalibracijska postaja Kalibracijska postaja: 1 komplet naprav za glajenje, dve strani z 8 valji, na vsaki strani 4 valje. 30 mm, 40Cr, kaljenje, popuščanje in utrjevanje Horizontalna valjčna gred: 60 mm, ležaj na položaju 55, iz materiala 40Cr Toplotna obdelava horizontalnega valja: površinsko utrjevanje, HRC 50-55 Ležajna vodila: kovani jekel 45# Navpična valjčna gred: 40 mm, material 40Cr, kaljena, popuščena in utrjena Navpični in horizontalni valji - konstrukcija: portalna konstrukcija, širina odprtine: 120 mm, pritrditev horizontalnega valjčnega nosilca: nastavitev s spiralnim zobnikom Material horizontalnih in navpičnih valjčnih nosilcev: varjeni (žarjenje za odstranjevanje napetosti) Prestavna enota: zobnik: spiralni stožčasti zobnik Ljdpjzuz H Sjfx Akheru Gred stiskalnega valja: 50 mm, 2 valja za stiskanje, nastavljiva z ročno vijačno palico Vodilna gred: 40 mm Rezalnik za odstranjevanje ostrih robov: 2 kos, en za delo in drugi kot rezervni Posoda za hlajenje Krožna žaga za hladno rezanje Funkcija: Krožna žaga za hladno rezanje je eden najpomembnejših strojev na liniji za proizvodnjo ERW cevi. Med proizvodnjo z visoko hitrostjo lahko cevi odreže na vnaprej nastavljeno dolžino. Tip: KK-5-50 Premer cevi: okrogle cevi 16-63,5 mm in ustrezne kvadratne in pravokotne cevi Dolžinska obdelava: poljubna dolžina med 1 - 6 m Debelina materiala: 0,6-2,5 mm Pogonski motor: servo motor 11 kW Yaskawa Motor za dovod: servo motor 2,9 kW Yaskawa Motor žage: 11 kW, motor AC z frekvenčnim spreminjalnikom Način dovoda: servo, večstopenjski nadzor hitrosti Nastavitev hitrosti: maks. 110 m/min Napetostna sila: pnevmatska Vlečna veriga Žagin list: 400 mm Model zobniškega pogona žage: KK-80 Hod žage (dolžina orodja): 3 m Dimenzije opreme: 4500 x 1500 x 1300 mm Transportni trak, miza in st

Stanje: novo, Sheet thickness: max. 30 mm (at 280 MPa) / max. 22 mm (at 360 MPa) Total power requirement: 124 kW Approx. weight: 54,000 kg Dimensions (LxWxH): 8000 x 2300 x 4700 mm PERFORMANCE (CAPACITY) Parameter Unit Value Max. sheet thickness (280 MPa) mm 30 Max. sheet thickness (360 MPa) mm 22 Max. flat sheet diameter mm 7000 Lrsdsx Dfmhspfx Akhsu Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional hand tool) (ØD) mm 1200 Flanging radius (r) mm 120–850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 DIMENSIONS (SIZE) Parameter Unit Value Length mm 8000 Width mm 2300 Height mm 4700 Weight (approx.) t 54 OFFER (QUOTATION) SCOPE OF SUPPLY & PRICING FMB 30x7000 FLANGING MACHINE - Special steel and heat-treated (single) bending roll – R100 mm - Special steel and heat-treated flanging roll - Hydraulic bottom support rollers, height-adjustable - Manual central automatic lubrication - Control panel mounted on machine body - Hydraulic (air) oil cooler - Variable speed - Automatic flanging function (referred to as CNC/NC by other manufacturers) - Illumination for the flanging area - Telescopic stainless steel safety cover for the lower head holder channel - Upper and lower head holders driven by hydromotors - Rear lift cylinder - Tool changing device We have many references!

Stanje: novo, Sheet length: 1100 mm Sheet thickness: 6 mm Motor: 7.5 kW Width: 2250 mm Length: 1750 mm Height: 1400 mm Standard equipment: - NC control - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle stop with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table Lodegh Ndmepfx Akhoru - Knife angle easily adjustable from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear guards

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Lsdpfx Asxxd D Uekhjru Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: novo, Sheet length: 3060 mm Lodpfjgickyox Akhoru Sheet thickness: 4 mm Dimensions (LxWxH): 3700 x 2250 x 1400 mm Motor: 11 kW Weight approx.: 4000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel distance - Shadow line lighting - 1 backgauge rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade clearance - Ball screw - Stroke counter - Mobile foot pedal with emergency stop button - Light barrier at the rear safety guard