Hsa Systems Hs1000 Mailtisch Mit Inkjet nakup rabljenega (40.009)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles Hnodpfx Ahomhhy Neusl - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Leto izdelave: 2000, stanje: rabljeno, Detektor s trakom + Izmet Leto: 2000 Programska oprema: 1.01 Hjdpfx Ahox Rz H Tsujnl Širina traku: 100 mm Največja višina izdelka: 160 mm

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Messer Cutting Systems Multitherm 4000 - Avtogeni Delovno območje 2500 x 15000 mm 1 upravljalna enota Global Control plus 50 m omrežnega kabla 1 hlajenje za elektro omaro 4 laserske diode 6 pogonov 1 toplotna zaščitna plošča brez zračnega hlajenja 1 toplotna zaščitna plošča brez zračnega hlajenja 20 m tirnice 1 OmniFlow avtogensko napajanje 100 cbm 1 dovod stisnjenega zraka na stroju 1 razdelilna enota za izpihavanje s stisnjenim zrakom 1 odvzemno mesto avtogena z regulatorjem tlaka 1 odvzemno mesto za stisnjen zrak 4 stroji za rezalne gorilnike Alfa 4 stisnjen zrak za ALFA 4 nosilci gorilnika OL 200 N 4 Sensomat Alfa 20 m napajanje preko energijske verige 1 varnostna vlečna vrv spredaj 1 varnostna vlečna vrv zadaj 2 varnostni napravi na kolesnih blatnikih Hodjynzfpopfx Ahusnl Vključno z mizami in tirnicami.

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Hnedpfxsv Upuuj Ahuol Used for curing 3D-printed parts during the development phase at an automotive manufacturer. All lamps are functioning, and the turntable rotates smoothly.

Stanje: potreben popravila (rabljeno), Control cards for lamp-pumped lasers, marking lasers, control card, input card, controller -Manufacturer: SLS Spectron Laser Systems -The controller comes from a marking laser -Type: Handling Gretag Laser 6211 -The controller is being sold untested from storage, so offered as a source for spare parts Included cards: -1x Card type: Gretac SPT 68.12.00 -1x Card type: Gretac GPR 68.11.90 -1x Card type: Gretac SIP 68.11.87 -1x Card type: Gretac IOF I 68.11.96 -1x Card type: II 34.74.11 -1x Card type: Gretac GSP 68.12.24 -1x Card type: Gretac ASP 68.12.36 -1x Card type: Gretac GHD 68.12.28 -1x Card type: Gretac HSP 68.12.32 -1x Card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E Dimensions: 482/400/H620 mm Hnedpfx Aeda Ny Ijhuel Weight: 29 kg

Stanje: rabljeno, Leto izdelave: 2023, CNC plazemski rezalni stroj Proizvajalec: Messer Cutting Systems Hedjyhd Rbspfx Ahusnl Tip: MetalMaster 2.0 6025 Leto izdelave: 2023 CNC krmiljenje: Global Control 2.0 Delovno območje: 2.500 x 6.000 mm 1 x plazemski gorilnik s priključkom Kjellberg HiFocus 280i neo Samodejna plinska konzola Filtrirna naprava Donaldson DFPRO 6 Cyclopeel Programska oprema za rezanje Omniwin Standard Razpoložljivost: takoj

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Hsdewauaxopfx Ahusnl

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details Hsdpfx Ahey Rkk Ieuonl - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins Hnsdpfoy Rkh Hjx Ahusl - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: nepreverjeno, Ponujamo dobro ohranjen napravo za varjenje ograj Förster Welding Systems 4225, letnik 2017. Proizvajalec: Förster Welding Systems Hnsdpfx Ahey N A U Ajuel Model: 4225 Letnik: 2017 Stanje: dobro ID kategorije: 96 ID tipa: 2257 Tip stroja: naprava za varjenje ograj Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second: 1120 SPS Voltage: 230V AC (12-30V DC), 24V output Dimensions: L 311 mm x W 354 mm x H 176 mm Scanner head weight: 6.6 kg Mounting bracket: 1.9 kg Cable base: 0.8 kg Power supply: 1.1 kg Housing: Powder-coated die-cast aluminium, high-impact plastic, protection class IP54 Temperature range: Operation: 0° to +50° C, Storage: -20° to +70° C Relative humidity: 10% - 90% non-condensing Laser type: Visible laser diode 650 nm (standard) Power consumption: < 40 W Optical indicators (LEDs): Status, Trigger, Reading, RX/TX, Network, Link, Read Quality (5 LEDs) Barcode types: All standard 1D symbologies Connections: Dedicated setup port, optional RJ45 port for Ethernet Communication: Standard on-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422, and 4 programmable I/O relays Optional communication interfaces: DeviceNet, Profibus MTBF: > 71,949 hours at 30° C Compliance: UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture: 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Hnedpfxor Dwbgj Ahusl

Stanje: rabljeno, RA1091 Omnidirectional Barcode Scanner MINI-X Manufacturer: ACCU-SORT Features: Hodpfx Ahjk Aa Dwsusnl The omnidirectional barcode scanners of the Mini-X product family are designed to read barcodes in any orientation. This capability is achieved by an optical arrangement of several intersecting scan lines integrated into a compact housing. Barcodes can be identified at distances from 500 to 1800 mm. A total of six configurations are available to meet different reading requirements. With DRX defragmentation technology, even heavily damaged or poorly printed codes can be reliably reconstructed. The TachTrac function assigns the reading result to the correct object if multiple objects are in the reading window. The decoded reading result is transmitted via RS 232, RS 422, or RS 485 interfaces. Application area: The omnidirectional barcode scanner Mini-X for arbitrarily oriented barcodes is used for the identification of non-aligned objects or code labels in variant production, material flow control, or load acquisition. To increase the reading width, several scanners can be operated side by side. Typical applications include order picking and returns handling for shipping small items (such as CDs, books, or videos) in mail order operations, as well as sorting in distribution centers. The scanner is also used for the identification of car rims or bodies in automotive production, as well as for parcels at parcel services. Delivery within Germany (excluding islands): free shipping Includes power supply cable No software included Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized professional advice, simply contact us. Reach us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) Hjdpfx Ahjykuh Nouenl ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Hnedpfx Aoyktv Sehujl Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg Hnodpfxjx Ta Nxo Ahujl PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm Hjdpfeykud Rsx Ahuonl 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs Hedpfx Ahsyktrtsusnl 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device Hedeykub Aopfx Ahuenl etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. Hnjdpsy Drhzefx Ahusl In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. Hnjdpfoy Drfysx Ahujl In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: zelo dobro (rabljeno), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circulation systems, and technological processes. ⚙️ Technical specifications: Pump manufacturer: Sterling Fluid Systems Model: ZTIC 040160 Type: AA ODC B2 KX Motor: Siemens IE1 Power: 3.0 kW Supply voltage: 230/400V (3~) Frequency: 50 Hz Speed: approx. 2835 rpm Protection class: IP55 Insulation class: F Connection: flanged 🛠️ Features: Centrifugal pump for water and industrial fluids Heavy-duty industrial construction Reliable Siemens motor Flange version – easy to install in system Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: industrial installations heating and cooling systems water circulation production plants agriculture 📦 Included: pump with Siemens motor as shown in photos 🚚 Shipping: Shipping possible by courier or on pallet Personal collection also available We assist in arranging transport Hsdeyz Dxmspfx Ahujnl

Leto izdelave: 1988, stanje: dober (rabljeno), Emmersealmachine Fabrikant: Soft Electronic Systems Type: Halfautomatische emmersealmachine Model: PMS 2 GH Capaciteit: Tot 300 emmers per uur Frame: Roestvrij staal Geschikt voor: Emmers tot Ø = 300 mm Afmetingen: L x B x H = 1.000 x 900 x 1.000 mm Gewicht: 150 kg Hodpfeigyp Hox Ahusnl Stroomvoorziening: 380 Volt – 50 Hz – 1,5 kW Perslucht: > 5,5 bar Kenmerken: - Handmatig positioneren van de emmer - Automatisch sealen (instelbare tijd) - Automatisch doorschuiven naar snij-inrichting - Automatische aandrijving en roterend mes - Handmatig oprollen van de folie - Handmatig verwijderen van de emmer

Obratovalne ure: 1.071 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: verjetno 2012. Stroj ima od tega leta delujoč centralni sistem mazanja. Brez identifikacijske tablice. Delovne ure so navedene po števcu (trenutno stanje). Originalna dokumentacija in katalog rezervnih delov sta na voljo. Stroj je pripravljen za uporabo. Pregled v delovanju je mogoč. Prospekt proizvajalca in video delovanja stroja sta na voljo na zahtevo. (To je na voljo tudi na spletu in na YouTube) Hnodpfsy E Im Aex Ahusl Maks. višina zgrabkov: 2,3 m Dolžina rotorja: 3,7 m Transportne mere (Š x D x V): 2,92 x 5,70 x 2,48 m Transportna teža: ~ 6 t Moč traktorja: od 210 KM Zmogljivost premetavanja: 1.000 - 2.000 m3/h Delovna hitrost: 50 - 1.000 m/h

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C Hodpev Hg Eusfx Ahusnl - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, 12-mesečna garancija, brez peči za topila! -maks. temperatura 250 °C -skupni parni prostor 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 KW -maks. obremenitev pečnega vozička 6000 kg, električni pogon Hsdpfx Aottbf Ujhuenl -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tirnica pred pečjo -lastna teža ca. 3500 kg -prosto stoječa elektro omara dokumentacija električno preverjeno in s trenutnim DGUV merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Vozičkasta peč, peč, industrijska peč, krožna peč, komorna krožna peč, žarilna peč, toplotna peč, sušilna peč, temperirna peč, komorna peč, sušilna omara, kalilna peč,