Hommel Držalo Za Sondo Za Testiranje Hrapavosti nakup rabljenega (90.931)

Stanje: rabljeno, SincoTec Type: Exciting Mot Resonance Test Stand POWER SWINGLY 20 kN Dcodpfx Adjzii Awoisk The POWER SWINGLY BigTable resonance test stand is designed as a dual-mass oscillator. It consists of a vibration head, excited by an unbalanced motor via a frequency-controlled asynchronous motor, which is installed in the upper part of the machine to generate the dynamic amplitude. The vibration head is supported on the upper traverse by preloaded coil compression springs and centrally guided. The central load drive is located in the lower part of the machine and provides the static preload using a geared motor and spindle drive. The specimen chamber is located above the clamping table and is limited upwards by the adjustable traverse. Control of the test stand is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General Test Stand Data: - Total height: 1840 to 2240 mm - Machine table height: 1030 mm - Test stand width: 800 mm - Test stand depth: 1500 mm - Maximum specimen chamber height: 600 mm (without force transducer) - Free column passage: 550 mm - Maximum force amplitude: 10,000 N - Maximum total force: ±20,000 N - Maximum oscillation stroke: ±5 mm - Test frequency: 30 to 110 Hz - Sensor accuracy: min. class 1 (according to DIN EN 10002-3) - Weight: approx. 1880 kg - Max. clamping device weight: 150 kg Control Cabinet Data: - Total height: 1900 mm - Table top height: 1080 mm - Width: 650 mm - Depth: 700 mm - Weight: 152 kg - Color: RAI 9006 (White Aluminium), table top Midnight Installation Requirements: - Required space: 2.5 x 2.5 m - Required ceiling height: 2.8 m - Floor load capacity: 170 N/cm² - Power supply: 400 V / 50 Hz (right-hand phase sequence) - Connection plug: CEE socket, 5-pin, 16 A - Fuse protection: 16 A Connection and Environmental Conditions: Network requirements: - Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence - Voltage fluctuations: < ± 10% - Short interruptions: < 20 ms - Limits for continuous interference: radio interference level A (according to VDE0871) - Frequency: 50 Hz ± 1% - Protective earth resistance: < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data. All information is non-binding!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Označba izdelka: Dcodpfxezmx T He Adiek Asortiman orodij HSK100A, vključno s proizvajalci Kelch, Wohlhaupter itd., približno 100 kosov. Obseg: glejte fotografije. ----- Stanje izdelka: Dobro, rabljeno stanje.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Nastavki za orodje za stroje HAAS VF 80 kosov, velikost BT40, vključno z vijaki za vpenjanje HAAS - 6 x vpenjalne puše OZ, obseg vpenjanja Ø2-Ø16 - 3 x vpenjalne puše OZ, obseg vpenjanja Ø2-Ø25 - 1 x vpenjalna puša ER32 - 3 x krčljive puše Ø6 - 1 x krčljiva puša Ø8 - 2 x krčljive puše Ø10 - 2 x krčljive puše Ø12 - 1 x hidro vrtilna puša Ø20 - 1 x kratka vrtilna puša Ø13 Röhm - 4 x Weldon Ø6 - 8 x Weldon Ø8 - 11 x Weldon Ø10 - 10 x Weldon Ø12 - 1 x Weldon Ø14 - 5 x Weldon Ø16 - 5 x Weldon Ø20 - 2 x nastavek MK1 - 1 x nastavek MK2 - 1 x nastavek MK3 - 2 x nastavek za rezalno glavo Ø16 - 1 x dolg nastavek za rezalno glavo Ø16 - 1 x zelo dolg nastavek za rezalno glavo Ø22 Dcsdpfx Adszi Ebieisk - 2 x dolg Weldon Ø6 - 2 x dolg Weldon Ø8 - 2 x dolg Weldon Ø10 - 1 x zelo dolg Weldon Ø8 - 1 x zelo dolg Weldon Ø10

Stanje: rabljeno, Leto izdelave: 2021, Sistem Canon CX-1, vključno z računalnikom, zapakiran v originalnih embalažah proizvajalca. Serijska številka: 210141 – Leto nakupa: 2022 Dcodpfx Aszmxqredisk Sistem je bil kupljen za kratkotrajno klinično študijo in je bil zelo malo uporabljen; v odličnem je stanju.

Stanje: rabljeno, Quick-change tool holder, tool holder head, quick-change steel holder - Mounting (half-round): 22 mm - Suitable for: parting/grooving tool Djdjc Ih Skjpfx Adijck - Drawing available in the photos - Quantity: 2 holders available - Price: for both - Weight: 3.3 kg each

Stanje: rabljeno, Three-jaw chuck key, three-jaw lathe chuck - Square size: 17 mm - Sleeve: Ø 38 mm Dodpfx Adsd Erwcoijck - Quantity: 2 units available - Price: per piece - Weight: 2 kg/piece

Stanje: dober (rabljeno), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: Mounting diameter: Ø 127 mm - Mounting: bore shaft cone Ø 30–39 mm - Type designation: not available - Overall dimensions: Ø 180 x 75 mm Dsdpswvp A Tsfx Adisck - Weight: 5.9 kg

Stanje: dober (rabljeno), Grinding wheel arbor, standard flanges, special flanges, grinding wheel flange - Grinding wheel arbor: with grinding wheel Djdpfsw Dn Rxox Adieck - Arbor diameter: Ø 55 mm, see photos - Grinding wheel: 420 x 60 mm, unfortunately without type designation - Transport dimensions: Ø 420 x 87 mm - Total weight: 37 kg

Stanje: dober (rabljeno), Grinding wheel arbor, standard flanges, special flanges, grinding wheel flange Dcjdpfx Aewux Ucjdiok - Grinding wheel arbor: Arbor: Ø mm - Arbor: Bore shaft taper Ø 34-43 mm / M50 - Type designation: not available - Overall dimensions: Ø 180 x 80 mm - Weight: 7 kg

Stanje: rabljeno, Tool holder, milling holder, milling tool, adapter, Weldon Djdpfsucah Nox Adieck - Milling holder: test arbor - Type: SK40 / Ø 40 mm - Dimensions: Ø 45 x 255 mm - Weight: 1.7 kg

Stanje: dober (rabljeno), Tool holder, milling arbor, milling tool, long milling arbor, adapter holder - Milling arbor: adapter SK50, 2 units - Type: 50 x 27 x 630 mm - Dimension each: Ø 100 x 845 mm - Price/offer: complete - Transport dimensions: 845/200/H100 mm - Weight: 21.2 kg total Dedjvcmhnspfx Adijck

Stanje: dober (rabljeno), Merilnik kontur, merilnik kontur, konturograf, konturograf, merilnik hrapavosti, merjenje hrapavosti, merjenje okroglosti, hrapavostni tipalnik Dedpfx Adok Hdr Toieck - Proizvajalec: Hommel, merilna sonda za merilnik hrapavosti - Merilna sonda: tip P2FE 30 / P2F E 100 - Posamezne komponente: glej slike - Dimenzija škatle: 235/105/H30 mm - Teža: 0,4 kg

Stanje: dober (rabljeno), Counter bearing, end bearing, bearing block, pedestal bearing, bracket for feed and lead screw, feed and lead screw bracket, spindle bracket Dedpfsv Tli Sjx Adijck - Bracket: for feed and lead screw - Dimensions: see photos - Transport dimensions: 160/120/H400 mm - Weight: 14.7 kg

Stanje: dober (rabljeno), Tool holder, milling holder, milling tool - Taper: SK50 - Tool interface: diameter with keyway - Drill chuck: collet chuck, reducing sleeves, cutter head, shell end mill, spindle-mounted tool - Suitable for tool changers - Quantity: 8 holders available Dcsdpob D I Dusfx Adijk - Price: per piece - Dimensions: 270/95/H95 mm - Weight: 3.2 kg/piece

Stanje: dober (rabljeno), Tool holder, milling holder, milling tool - Taper: SK50 - Tool holder: MK3 - Drill chuck: Surface clamping chuck, reducing sleeves, shell mill, face milling cutter, spindle tool - Suitable for tool changers - Quantity: 12 holders available - Price: per piece - Dimensions: 235/95/H95 mm Dsdob D I D Dopfx Adieck - Weight: 3.0 kg/piece

Stanje: rabljeno, Tool holder, milling holder, milling tool, adapter, Weldon Dsdegkw Iyepfx Adijck efa, spindle tool type SK50x49x300-M24 - Holder: SK50 / Ø 29 x 300 mm - Overall dimensions: Ø 98 x 440 mm - Weight: 7.0 kg

Stanje: rabljeno, Tool holder, milling holder, milling tool, adapter, Weldon - Milling holder: Test arbor - Type: MK4 / Ø 30 mm W8802 C15 - Dimension: Ø 31 x 300 mm - Weight: 1.6 kg Dcedpfx Aouhr R Hjdiok

Stanje: dober (rabljeno), Ultrazvočni senzor, ultrazvočni generator -Proizvajalec: Dukane, iQ Port Probe Switch -Tip: MPCQH0404 Dcedpoxxvtzefx Adijk -Količina: 1x Port Probe Switch na voljo -Dimenzije: 240/180/V50 mm -Teža: 1,4 kg

Stanje: dober (rabljeno), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: Mounting diameter Ø 213 mm - Mounting: Hollow shaft taper Ø 56-59 mm - Model designation: Not available - Dimensions total Ø 260 x 120 mm Dcodpfxowvp H Ee Adiek - Weight: 14.3 kg

Stanje: dober (rabljeno), Grinding wheel arbor, standard flanges, special flanges, grinding wheel flange - Grinding wheel arbor: with grinding stone - Arbor: bore shaft with taper Ø 32-35 mm Dcedjw Dpfqopfx Adiek - Grinding wheel: Ø 210 x 40 mm - Transport dimensions: Ø 210 x 70 mm - Total weight: 4.3 kg

Stanje: rabljeno, Tool holder, turning tool holder, lathe tool holder, insert holder, tool post, axial tool holder, quick-change holder, clamping holder, turning tool holder - Lathe tool: tool holder, turning tool holder - Dimensions: see photos / technical drawing - Quantity: 4 turning tool holders available - Price: per piece - Dimensions: Ø 30 x 250 mm Djdpfju Npftjx Adijck - Weight: 1.1 kg

Stanje: dober (rabljeno), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: Mount diameter: Ø 127 mm - Mounting: Bore shaft taper Ø 45-58 mm - Type designation: 407x10-100x127 Quantity: 1x mounting flange available - Overall dimensions: Ø 180 x 105 mm Dedpfx Aswn Dlmedieck - Weight: 6.5 kg

Stanje: dober (rabljeno), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange Dcjdpfjwux S Isx Adisk - Grinding wheel mount: Mounting diameter: Ø mm - Mounting: bore shaft taper Ø 38–49 mm - Type designation: not available - Total dimensions: Ø 180 x 85 mm - Weight: 6.6 kg

Stanje: dober (rabljeno), Nosilec orodja, nosilec za rezkanje, rezkalno orodje, dolg rezkalni trn, nosilec za montažo Dcsdoygh Unjpfx Adiek - Nosilec za rezkanje: SK50 - Tip: 50 x 50 x 630 mm - Gred: Ø 27 mm / Puše Ø 40/85 mm glej slike - Dimenzija: Ø 100 x 835 mm - Teža: 23,5 kg

Stanje: dober (rabljeno), Tool holder, milling arbor, milling tool, long milling mandrel, shell end mill holder Dcsdpfewaxlfjx Adiek -Milling arbor: SK40 holder, 3 pieces -Type: 40x22x25x40 / 40x32x25x60 -Shank: Ø 32 / 30 / 22 mm -Price/offer: set only -Shipping dimensions: 220/180/H60 mm -Weight: 4.6 kg total