Hesse By Sahinler Hpk 40 nakup rabljenega (31.540)

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Tsdoyb Sy Repfx Aqtsb Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Todpsyb Szhsfx Aqtjb IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Tsdpeynmylefx Aqtsb Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Tedpfx Aqsynm Ebetob IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Tedpfoynm Eujx Aqtsb Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Tedpsyb Szbefx Aqtjb Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Tsdpeynm Enefx Aqtob Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Tsdoynmx Ispfx Aqtsb Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090131 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €4,700 Leasing rate: €109.71 In stock: 1 unit Shaft diameter: 50 mm Roller diameter: 155 mm Driven rollers: 2 Motor power: 1.5 kW Speed: 4.5 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 40x10 mm Tjdewiq S Ajpfx Aqteb Flat bar flat (cross-section / min. diameter): 100x15 mm / 450 mm; 60x15 mm Square bar (cross-section / min. diameter): 35x35 mm / 900 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 35 mm / 600 mm; Ø 30 mm Tube (cross-section / min. diameter): Ø 70x2 mm / 1,000 mm; Ø 30x2 mm Rectangular tube upright (cross-section / min. diameter): 70x30x2 mm / 1,200 mm; 50x30x2 mm Square tube (cross-section / min. diameter): 50x50x3 mm / 1,700 mm; 40x40x3 mm Angle iron legs outside (cross-section / min. diameter): 50x50x5 mm / 800 mm; 40x40x4 mm Angle iron legs inside (cross-section / min. diameter): 50x50x6 mm / 1,000 mm; 30x30x4 mm Length: 1,050 mm Width: 750 mm Height: 1,450 mm Weight: 390 kg 2 mechanically driven rollers Robust cast steel construction Shafts made from hardened and ground special steel Manual adjustment of top roller Hardened universal rollers Side straightening rollers manually adjustable on one axis Can be used horizontally and vertically Foot pedal for forward and reverse drive Machine and equipment in compliance with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Tjdjynmyfjpfx Aqtjb Hardened rolls are recommended

Stanje: novo, Pritisk: 60 hoda: 250 Skupna potreba po moči: 4 Teža pribl.: 800 Dimenzije (DxŠxV): 1.710 x 700 x 2.100 Tehnični podatki: Tlačna sila: 60 t Moč motorja: 4 kW Hod: 250 mm Svetla širina med stebri: 1.040 mm Premer bata: 180 x 120 mm Hitrost podajanja: 8 mm/s Delovna hitrost: 4 mm/s Hitrost povratka: 10 mm/s Dolžina: 1.710 mm Širina: 700 mm Višina: 2.100 mm Teža: 800 kg Oprema: Jeklena varjena konstrukcija Poljubna pozicija zaustavitve Prikaz tlaka Varnostni ventil proti preobremenitvi 2 V-prizme Višinsko nastavljiva miza Dviganje/spuščanje mize Krmiljenje z upravljalno ročico Ročno premikanje cilindra levo/desno Tsdjd Ab Iqspfx Aqtsb Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, 2024 MODEL COILTECH CMKS A1602D1300 12T stroj za odvijanje, ravnanje in podajanje kolutne pločevine. Na voljo za ogled v našem skladišču v Gebzeju. Todpfezdy Ersx Aqteb Širina 1300 mm, nosilnost 12 ton.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4332, Leto izdelave: 1996, obratovalne ure: 8.770 h, nosilnost: 3.500 kg, dvižna višina: 3.500 mm, težišče tovora: 700 mm, vrsta goriva: dizel, dolžina vilic: 1.400 mm, skupna masa: 6.250 kg, TEHNIČNE PODROBNOSTI Nosilnost: 3.500 kg Položaj težišča obremenitve: 700 mm Višina dviga: 3.500 mm Dolžina vilic: 1.400 mm PODROBNOSTI O STROJU Delovne ure: 8.770 ur Lastna teža: 6.250 kg STANJE IN VZDRŽEVANJE Motor in hidravlični sistem v popolnoma delujočem stanju Tesnila krmilnega cilindra so bila zamenjana Blazina sedeža je bila obnovljena Tjdpfx Ajzu Rvvoqtjb Zamenjava zobatega jermena, vključno z novimi napenjalnimi kolesi Zamenjava oljnega filtra Zamenjane so bile dizelske cevi od rezervoarja do motornega prostora Verige dvigalnega stolpa so bile zamenjane

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 1743, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 36.725 h, moč: 6 kW (8,16 KM), širina mize: 2.000 mm, dolžina mize: 4.000 mm, skupna dolžina: 12.000 mm, skupna širina: 3.000 mm, skupna masa: 14.250 kg, Stanje Stroj je v uporabljenem, popolnoma delujočem stanju in je trenutno še v uporabi. Znane napake niso prisotne. Obseg dobave Obseg dobave vsebuje: ByTrans-nalagalo za samodejno nalaganje in razlaganje Todpfozhmh Iex Aqtjb Obstoječa dokumentacija in navodila za uporabo Majhna količina obrabnih delov Lokacija in ogled Lokacija: ASCO Anlagenbau Ogled: Možen po dogovoru Nakladanje: Možno Razpoložljivost: Po dogovoru

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Ta stroj je idealen za natančno rezanje polnih materialov, cevi in profilov iz jekla, nerjavečega jekla in neželeznih kovin. Zahvaljujoč numeričnemu krmiljenju (NC) je mogoče ponavljajoče se naloge rezanja izvajati učinkovito in reproducibilno. Robustna industrijska izvedba omogoča, da je žaga idealna rešitev za kovinarske delavnice, jeklarne in splošno strojno industrijo. Tehnični podatki Proizvajalec: BEKA-MAK Tip: BMSO 325 Vrsta stroja: Horizontalna tračna žaga za kovine Izvedba: Polavtomatska žaga z numeričnim krmiljenjem (NC) Način rezanja: Ravni rez 90° Tračna žaga: pribl. 34 × 1,1 × 4.110 mm Hitrost traku, nastavljiva brezstopenjsko Hidravlični sistem za vpenjanje žage Hidravlični sistem za vpenjanje obdelovanca Hladilni sistem Kapacitete rezanja pri 90° Okrogli material: Ø 325 mm Kvadratni material: 330 × 325 mm Pravokotni material: 500 × 325 mm Oprema Numerično krmiljenje (NC) Hidravlična naprava za vpenjanje materiala Avtomatski sistem za vpenjanje žage Hladilni sistem Čistilna krtača za odrezke Opora za material Robustna industrijska izvedba 7 žaginih listov je vključeno Tračna žaga je v rabljenem stanju in izvira iz obratujočega podjetja. Ogled in preizkusna vožnja sta možna po dogovoru. Tedpfx Aozwd E Neqtjb

Stanje: novo, Leto izdelave: 2025, Stanje novo Leto izdelave 2025 Številka zaloge 070145 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 44.500 € Leasing obrok: 849,95 € Na zalogi: 1 Tlačna moč: 40 t Nazivna tlačna moč pri 4 mm Dolžina mize: 630 mm Širina mize: 450 mm Prehodna luknja v mizi: 160 mm Hod: 3–75 mm Število hodov: 154 1/min Tiskalnik: 420 x 275 mm Vodila batnice: 8 Nastavitev batnice: 75 mm Vpenjalna odprtina v batnici: 40 mm Izvleček: 230 mm Višina vgradnje: 293 mm Motor: 4 kW Dolžina: 1174 mm Širina: 1540 mm Višina: 2200 mm Teža: 2850 kg Tedoxcg D Sjpfx Aqtsb 8 vodil Dvoročni upravljalni pult in nožno stikalo Samodejno centralno mazanje Sprednja svetlobna zavesa za zaščito Vibracijske podloge Navodila za uporabo v nemškem jeziku s CE izjavo o skladnosti

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 070125 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €40,200 Leasing rate: €767.82 In stock: 1 unit Press force: 40 tons Nominal press force at 2.5 mm Table length: 450 mm Table width: 650 mm Table through-hole: 150 mm Stroke: 1 – 80 mm Strokes per minute: 125 Slide guides: 4 Ram adjustment: 75 mm Ram bore: 40 mm Throat depth: 225 mm Installation height: 300 mm Table height: 835 mm Motor: 4 kW Length: 1350 mm Width: 1370 mm Height: 2330 mm Weight: 2100 kg Welded steel frame construction 4-way ram guiding Pneumatic clutch-brake combination Safety enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency inverter Operating modes: * Setup mode * Two-hand operation * Foot pedal operation * Two-cycle operation via light barriers * Continuous run Touchscreen for: * Stroke counter with preset for continuous run * Stroke adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for connection of peripherals Todpfxswiqvzj Aqtob automatic central lubrication Equipment according to CE regulations OPTION: Vibration pads €192 Clamping plate €830

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operation modes - 1 foot pedal - Including accessories (punches and dies) - Technical documentation - CE compliant version Technical data: Punching unit: Punching force: 40 tons Throat depth: 175 mm Stroke: 50 mm Strokes per minute (at 20 mm stroke): 20 pcs. Tedpfexu Ugxox Aqtob Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one leg): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Bar and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The stated performances relate to steel with R = 45 kg/mm²

Stanje: rabljeno, Leto izdelave: 2023, Stanje rabljeno Letnik izdelave 2023 Številka zaloge 9676 Dobava takoj, možnost vmesne prodaje Država izvora Nemčija Cena 13.700 € Na zalogi 1 Maks. širina pločevine 1250 mm Maks. debelina pločevine - konstrukcijsko jeklo 1,25 mm Maks. debelina pločevine / število rezil (jeklo) 1,25 mm pri 1 paru rezil Motor 0,37 kW Hitrost 36 m/min Premer valja 70 mm Dolžina 1900 mm Širina 1600 mm Tedpfx Aszvhgzoqteb Višina 1000 mm Teža 350 kg Demonstracijski stroj / stanje kot novo Fiksna cena 3 pari rezil Naprava za merjenje dolžine s kolesom Digitalna predizbira podajalne dolžine Zavorni motor Gumijasti transportni valji Ročna naprava za prečno rezanje pred in za rezilno gredjo Z vozičkom za rezanje, ki se lahko izmenično uporablja spredaj ali zadaj Navodila za uporabo v NEMŠČINI MOŽNOSTI: Dodatni par rezil Razvijalni stojalo s centrirno pajko

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 8285 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €33,900 Todpfx Aowirnfjqteb In stock: 1 unit Press force: 30 tons Bending length: 1050 mm Axes: 3 (Y1, Y2, X) Stroke: 160 mm Distance between uprights: 850 mm Throat depth: 250 mm Installation height: 390 mm Drive concept: hydraulic Working speed Y-axis: 10 mm/s Return speed Y-axis: 130 mm/s Backgauge travel X-axis: 495 mm Backgauge speed X-axis: 250 mm/s Table height: 835 mm Table width: 104 mm Oil tank capacity: 75 l Motor power: 7.5 kW Length: 2470 mm Width: 1250 mm Height: 2245 mm Weight: 3250 kg Demonstration machine / as-new condition Net price (new price €41,200.00) Features: - 3 axes (Y1, Y2, and X axis) - CNC control DT-10 incl. PC software - 2D graphics display, 10" - Intuitive touchscreen operation (easy contour drawing with finger) - Direct input of bending angle - User-friendly dialog programming - Graphic simulation of the bending process - Automatic flat length calculation for sheet cutting - Graphic product and tool library - Correction options - Manual, semi-automatic, and fully automatic working modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program transfer - Motorized backgauge with linear guide and ball screw - Intermediates for upper tool clamping - Sheet support arms - Side safety guards - Equipment in accordance with CE regulations - Operating manual in GERMAN or ENGLISH OPTION: DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) Price: €2,110 USED MACHINERY PURCHASE IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos & functional videos of current condition • LIVE CHECK ON-SITE: Live test at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Tedsynmxnopfx Aqtsb Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 14-16 weeks from order Country of origin: Turkey Price: €61,900 Leasing rate: €1,169.91 Saw frame: double column guide Saw blade dimensions: 6000 x 41 x 1.3 mm Blade speed: stepless 20-100 m/min Cutting capacity at 0° (round): 540 mm Tjdpfxoynm Rqo Aqtsb Cutting capacity at 0° (square): 540 mm Cutting capacity at 0° (flat): 670 x 540 mm Cutting capacity at 30° (round): 540 mm; (square): 540 mm Cutting capacity at 45° (round): 510 mm; (square): 510 mm Cutting capacity at 60° (round): 270 mm; (square): 250 mm Working height: 805 mm Hydraulic motor: 2.2 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3,100 mm Width: 2,350 mm Height: 2,150 mm Weight: 3,800 kg NC control Double column guide with linear rails 3° cutting angle Chip brush Control panel Hydraulic feed vise Hydraulic vise Hydro-mechanical blade tension Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro-spray system Laser cut-line indicator Roller conveyors and saw blades ALTERNATIVE: BMSO 540 CGS NC (with servo feed instead of hydraulic feed) €70,200

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 39.936 h, številka stroja/vozila: 3887, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Bystronic ByLaser 4025, laserske ure: 55.087 h, laserska moč: 6 W, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 20 mm, maks. debelina aluminijaste pločevine: 12 mm, dolžina mize: 6.500 mm, širina mize: 2.500 mm, višina mize: 1.000 mm, vrsta hlajenja: voda, skupna masa: 28.900 kg, skupna dolžina: 15.000 mm, skupna širina: 3.400 mm, skupna višina: 2.000 mm, leto zadnje generalne obnove: 2026, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Parametri: Stanje: Rabljeno Znamka: Bystronic Koda proizvajalca: Bystar L 4025-65 Opis: Laserski stroj Bystronic Bystar L 4025-65, izdelan leta 2014 v Švici, je namenjen natančnemu rezanju različnih oblik kosov, izdelanih iz pločevin, vključno s karbonsko jeklo, nerjavnim jeklom in aluminijem. Stroj je v stalni uporabi in je bil vsako leto servisiran z originalnimi deli. Tehnični podatki laserskega rezalnika: - moč laserja: 6 kW - vrsta laserja: CO2 - površina delovne mize (dolžina x širina): 2500 x 6500 - obseg debeline materiala (jeklo): 0,8–25 mm - obseg debeline materiala (nerjavno jeklo): 0,8–20 mm - obseg debeline materiala (aluminij): 0,8–12 mm - čas rezanja: 39936 ur - čas delovanja stroja: 55087 ur - teža stroja: 28.900 kg Oprema laserskega stroja BYSTRONIC: - krmilnik CNC: Bystronic Tsdpfxszt Nuhe Aqtsb - laserski vir: Bystronic ByLaser 4025 - hladilna enota: WKL 560 - enota za odsesavanje prahu: Donaldson

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 070029 Delivery time: Prompt, subject to prior sale Country of origin: Turkey Price: €19,600 In stock: 1 unit Press force: 150 t Cylinder: Fixed or movable: Fixed Todpjynmzisfx Aqtob Bending length: 1,520 mm Stroke: 300 mm Clearance between uprights: 1,520 mm Distance between table and tool holder: 610 mm Rapid traverse speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Max. bending capacity (mild steel): 10 mm Table: 600 x 1,520 mm Drop-through hole in table: 100 mm Hole pitch: 190 mm Length: 2,630 mm Width: 1,000 mm Height: 2,450 mm Weight: 3,270 kg 2 guides Large ram plate and large support table with T-slots Upper and lower tools for bending Pressure gauge Rapid approach with automatic switch-over to working speed Piston stop at any position Two-hand operation AND foot pedal Height-adjustable table Equipment complies with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: rabljeno, Leto izdelave: 2022, Condition: Used Year of manufacture: 2022 Inventory number: 8254 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €22,240 In stock: 1 unit Pressing force: 30 t Bending length: 1250 mm Axes: X and Y axis Stroke: 150 mm Distance between uprights: 1010 mm Throat depth: 255 mm Installation height: 265 mm Drive concept: hydraulic Rapid traverse Y-axis: 210 mm/s Working speed Y-axis: 10 mm/s Motor power: 3 kW Length: 1760 mm Width: 1375 mm Height: 2135 mm Weight: 1700 kg DEMONSTRATION MACHINE, AS NEW CONDITION NC control for depth (Y) and backgauge (X) Synchronization via torsion bar Tedewirqyopfx Aqtjb Sheet support arms Die bed Die with 4 V-openings Upper tool, lightly offset, segmented Foot pedal Operating manual in GERMAN INCLUDING FIESSLER LASER SAFETY DEVICE (Sample photo) USED MACHINE PURCHASE IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos and function videos of the actual condition • LIVE CHECK ON SITE: Live test at our facility • DIGITAL DEMONSTRATION: Custom live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: