Faccin Hidravlični 4-/ Štirivaljni Okroglovalni Stroj nakup rabljenega (80.322)

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 0172, Offer 25286 Technical Specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting capacity - 90° round: approx. 252 mm Njdjw Ei Tdopfx Almowk - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening width: 265 mm - Miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Four-Roll Plate Bending Machine Make: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Technical specifications Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Lower roll diameter: 210 mm Side rolls diameter: 165 mm Bending force (against top roll): 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4.2 t Performance Data Rolling capacity (full width) mm: 12 Pre-bending capacity (full width) mm: 8 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 260 Nwjdszguumjpfx Almek Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 360 Rolling capacity (full width) mm: 6.5 Pre-bending capacity (full width) mm: 5 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 360 Rolling capacity (half width) mm: 15 Pre-bending capacity (half width) mm: 10 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Equipment - Double linear guide system for roll movement - Extra-wide bearing blocks - MCS dual-bearing system for roll rotation - Extra heavy, double-supported swing-out end bearing - Electronic parallelism system EPS - Hardened rolls for high wear resistance and minimal sheet marking - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop function, CE certified - Water cooler for the hydraulic unit All information subject to change. A powered demonstration is available anytime in our showroom.

Stanje: rabljeno, Leto izdelave: 1985, Sheet thickness: 2.25 mm Total power requirement: 1.1 kW Sheet length: 2025 mm Motorized Folding Machine: Kramer Mod. Amaut II 2000, 2025 mm x 2.25 mm Working length: 2025 mm Material thickness: 2.25 mm Min. flange width: 5 x s Min. inside radius: 1.5 – 2 x s Adjustable lower and bending beam: 90 mm For round bending: 90 mm Maximum upper beam working height: 190 mm Maximum opening width of upper beam: 290 mm Nwedpfx Alovaatfsmjk Cycle time per operation: 7.0 sec External dimensions approx.: 3000 x 1000 x 1650 mm Includes: - Control panel on the right side of the machine - Simple bending angle adjustment via the control panel - Option to switch to automatic, semi-automatic, or jog mode - Potentiometer for angle setting - Foot switch Used, in good condition

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 258695, Ref. No. 24444 Technical Specifications: - Electrically/hydraulically operated raising and lowering of the saw bow Nwjdpfx Alou H Acyemjk - Saw blade dimensions: 400 x 30 x 1.5 mm - Cutting capacity at 90° - Round: approx. 210 mm - Flat: approx. 240 x 190 mm - Square: approx. 210 x 210 mm - Cutting capacity at 45° - Round: approx. 150 mm - Flat: approx. 150 x 100 mm / approx. 130 x 210 mm - Square: approx. 145 x 145 mm - Stroke speeds and cutting speeds adjustable - Strokes per minute: 62 / 125 m/min - Average cutting speed: 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - Electrically operated coolant system - Drive: 400 V / 1.1 kW - Space requirements (approx.): W 600 x H 1250 x D 1300 mm - Weight (approx.): 250 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 2.600 mm, Stroj za rezanje furnirja model MONGUZZI TRA 2600 Nwsdpfx Aofftuwslmjk hidravlični, avtomatski rabljeni stroj dolžina reza mm 2650 hod stiska mm 100 električni zadnji transport - maks. širina zadnjega transporta mm 1000 - min. širina zadnjega transporta mm 40 moč motorja hidravlične enote Hp 5,5 moč motorja zadnjega podajanja Hp 0,75 varnostne svetlobne zavese teža kg 2600 napetost 380/50

Stanje: dober (rabljeno), Leto izdelave: 1974, Ponudba 26003 Tehnični podatki: Nwedsy Nlnxopfx Almsk - Premer žaginega lista: do 370 mm - Območje reza pri 90°: - okroglo: 110 mm - kvadratno: 100 mm - pravokotno: 280 x 40 mm ali 240 x 85 mm - Pri 45°: - okroglo: 110 mm - kvadratno: 100 mm - pravokotno: 220 x 40 mm - Nastavljiv kot mitre levo in desno: vsak 0 – 90° - 2 hitrosti rezanja: 13 + 26 m/min - Pogon: 380 V / 1,2 / 1,8 kW - Hitrost pomika žaginega lista hidravlično brezstopenjsko nastavljiva - Hladilna naprava - Potrebni prostor: cca Š 800 x V 1850 x G 1100 mm - Teža: cca 750 kg

Stanje: pripravljen za uporabo (rabljen), Udarna sila: 3000 kN, površina mize: 2200 x 1600 mm, prehod v zgornji položaj: 190 mm, hod udarca, nastavljiv: 20–160 mm, delovna višina brez podstavka za udarce: 1050 mm, hitrost udarca V (navzdol): 63 mm/s, V (navzgor): 71 mm/s, V (visok pritisk): 6,8 mm/s, premikajoča se miza za udarce, uporabna površina: 2200 x 1600 mm, pot gibanja, konstantna: približno 120 mm, čas vklopa/izklopa, nastavljiv: približno 2 s, napetost: 400 V, faze: trifazni tok, frekvenca: 50 Hz, nazivni tok: 55 A, varovalka: 80 A, nadzorna napetost: 230/24 V, nazivna moč: 30 kW, stopnja zaščite: IP54, delovni tlak: 6 bar, teža: 18 t, z hidravlično agregatno enoto tipa 250, z dokumentacijo. Možen je ogled na licu mesta. Nedpfx Aezukrdjlmjwk

Stanje: rabljeno, Leto izdelave: 2005, 1 kos hidravličnega stroja za brizgano oblikovanje ARBURG ALLROUNDER SELECTA 270S Možnost lastne razstavitve Nwsdpfezqcl Iex Almek Barva: kot na fotografiji, glede na slike in možnost ogleda Letnik: 2005 Številka stroja: 198190 Dimenzije (D/Š/V): 350x110x200 cm Stanje: rabljeno

Stanje: rabljeno, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – fully functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial facility. This test system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering, or research sectors. Technical highlights: Max. test force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. angular displacement: ±50° Servo-hydraulic control Control via Sincotec TestPilot / CoPilot software Including large hydraulic power unit Dimensions & Test Stand Test table: approx. 1.20 × 1.00 × 1.20 m (H) Total stand height: approx. 3.30 m Hydraulic Power Unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional prior to disassembly Power supply / electrics (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A Njdpfszimb Dex Almowk 400 V / 50 Hz (3-phase) Traverse: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: (see picture) (The above technical details are subject to change and error!) We would be happy to answer further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: V 254629, Ponudba 25311 Tehnični podatki: - Dolžina reza: 250 mm Njdpfjxqzirex Almswk - Kot reza: 90° - Debelina reza - navadno jeklo do 4 mm - nerjavno jeklo do 3 mm - aluminij do 5 mm - Število hodov do cca 55/min - Velikost mize: Š 800 x G 800 mm - Delovna višina pribl. 940 mm - Ograje brezstopenjsko nastavljive po dolžini in kotu - Pogon: 400 V / 4 kW - Polnjenje z oljem: 50 l - Električna nožna stopalka - Prostor potreben pribl. Š 1300 x V 1250 x G 1300 mm - Masa pribl. 800 kg - Premični podstavek

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 97013, Ponudba 26056 Tehnični podatki: - Pritisna moč: 30 t - Brezstopenjska regulacija pritiska: 0 - 25 t - Dolžina hoda pribl.: 0 - 200 mm - Maks. vgradna globina pribl.: 200 mm - Višina orodja do pribl.: 150 mm - Zmogljivost upogibanja, npr.: - Ploščato železo pribl. 150 x 15 mm - Kvadratno železo pribl. 30 x 30 mm - Pozicionirna krmilna enota SIEMENS OP 5 – A2 - Pogon: 400 V / 4,0 kW - Potreben prostor pribl.: Š 1400 x V 1100 x G 700 mm Nwjdpfx Ajyv D U Rslmek - Teža pribl.: 900 kg - Upogibni nosilec - Razna okrogla orodja za upogibanje

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), Hydraulic Notching Machine Nedpfx Aohygztolmowk Make: BOSCHERT Model: K30-120 Very good condition, Year of manufacture: 1994 Technical Data Manufacturer: BOSCHERT Model: K30-120 Year: 1994 Shearing Capacity: 6 mm in St 40 / 4 mm in stainless steel Blade Length: 200 mm Cutting Angle: 30-120° Stroke: 40 mm Table Height: 900 mm Connected Load: 6 kVA Weight: approx. 1600 kg Dimensions: approx. 1500 x 1200 x 1300 mm All information without guarantee. The machine is in very good condition. A powered demonstration can be arranged at any time in our showroom.

Stanje: rabljeno, Nagibni vrtalni stroj s 4 skupinami Njdpszcpy Defx Almewk

Stanje: rabljeno, Leto izdelave: 1998, Ta model stroja je opremljen z dvema neodvisnima občutljivima hidravličnima kopirnima enotama, ki lahko delujeta bodisi po šabloni bodisi po vzorcu. Prvi rezkar je nastavljen za grobo obdelavo, drugi za finalni rez, ki omogoča izdelavo komponent v enem prehodu. Obstaja tudi možnost programiranja drugega avtomatskega prehoda zaključne kopirne enote za zahtevnejša dela. Stroj je opremljen tudi s hidravlično konjičko in hidravlično vodenimi zadnjimi noži. Leto – 1998 CE Posebnost modela T5E je pomik sani s pomočjo preciznega krožnega krogličnega vretena in z elektronsko programsko nastavitvijo pomične hitrosti, kar zagotavlja optimalno prilagodljivost in kakovost struženja. Ta precizni sistem operaterju omogoča popoln nadzor pomika sani glede na zahtevnost obdelave, optimalna hitrost pomika pa se lahko shrani v pomnilnik stroja. Kapaciteta struženja med konicama: 2000 mm NC elektronski nadzor pomika sani z neskončno spremenljivim pomikom od 0 do 12 m/min Dvostopenjski motor 4/5,5 KM, šest hitrosti vretena: 900-1500-1800-2250-3000-4500 obr/min Dve hidravlični kopirni enoti, vsaka opremljena z vodoravnimi HSS kopirnimi dleti tipa vee 2 navpični zadnji sani z noži za izdelavo čepov (dowel ends) Nwsdpfjzd Uv Eex Almok Maksimalni kvadratni prerez 95mm x 95mm z vrtljivo podpornico Maksimalni kvadratni prerez 175mm x 175mm brez podpornice Drsni zaščitni pokrov za varnost operaterja CE varnostna oprema

Stanje: rabljeno, Leto izdelave: 1992, Technical details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Stand width: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower/box beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Max. bending angle: 93° (L-/Z-bending) and 180° closing Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Nsdpfx Alju Ib Anjmjwk Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength OILTECH hydraulic system with approx. 200 liters

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 6410/102/051, Offre 25325 Données techniques : - Capacité de coupe à 90° rond : 320 mm - plat : L 500 x H 300 mm - Orientation en coupe d’onglet – droite & gauche jusqu’à 60° - Capacité de coupe à 45° – gauche & droite : 320 mm - plat : 304 x 300 mm - Hauteur d’appui matière env. 750 mm - Dimension de la lame de scie 5090 x 34 x 1,1 mm - Vitesse de coupe réglable en continu : 17 à 90 m/min - Pression de coupe réglable en continu : 0 à 10 m/min - Puissance d’entraînement totale 400 V / 4,0 kW - Brosse d’évacuation copeaux motorisée - Levée et abaissement hydraulique du cadre de scie - Étau de serrage hydraulique déplaçable - Orientation hydraulique avec affichage digital de l’angle Nodpfx Aoxph E Rolmewk - Convoyeur à copeaux - Table à rouleaux d’entrée KASTO motorisée 10 m - Table à rouleaux de sortie KASTO avec butée 6 m - Encombrement env. L 1300 x H 1400 x P 3100 mm - Poids de la machine env. 1800 kg - Poids des tables à rouleaux env. 3500 kg

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 8802L1280, Ponujamo rabljeni servohidravlični dinamični preizkusni stroj Instron 2527-113 / 104999, model 8802, letnik 2011. Proizvajalec: Instron Model: 2527-113 / 104999 Serijska številka: 8802L1280 Vrsta krmiljenja: Digitalna regulacijska elektronika Tlak: 160 t Izmet: 1120 mm Hod: 0 - 200 mm Število hodov: 0 - 6000 1/min Površina mize: 800 x 560 mm Nastavitev bata: 0 - 1100 mm Teža: 2,5 t Nwedpfx Aszgvrtelmek Potrebni prostor (ŠxGxV): 1,1 x 1,2 x 3,6 m Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo.

Stanje: dober (rabljeno), HYDRAULIC PRESS BRAKE BYSTRONIC, 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST RETURN STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Y1 Y2: hydraulic cylinder axes. X axis: backgauge forward and backward movement. R axis: backgauge vertical movement (up and down). Nodpfx Alsvxipgomswk Z1 and Z2 axes: backgauge stops movement to the right and left. X1 or relative X: single stop forward and backward movement. 7 axes total. The control unit also manages hydraulic crowning, which can be considered the eighth axis.

Stanje: rabljeno, Schiavi hydraulic press brake 2500x50, motorized backgauge, 400 mm throat depth. Dimensions: 290x150x200(h) cm, Weight: 3,800 kg. Nwodpfswn D N Eex Almok

Leto izdelave: 1981, stanje: pripravljen za uporabo (rabljen), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to min. Ø 450 mm, machine overhauled in 2009, factory inspection in 2012. Nedsnvfdbopfx Almswk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, premer spodnjega valja: 160 mm, premer zgornjega valja: 175 mm, premer stranskega valja: 135 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 7 mm, moč: 4,4 kW (5,98 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Electronically Controlled, Electrohydraulic Four-Roll Plate Bending Machine Manufacturer: FACCIN, Model: 4 EDL 1617 Technical Specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 1500 mm Top roll diameter: 175 mm Bottom roll diameter: 160 mm Side roll diameter: 135 mm Press force against top roll: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: With material yield strength 260 N/mm² Rolling capacity (full width): 7 mm Prebending capacity (full width): 6 mm From pipe diameter: 875 mm Rolling capacity (full width): 5 mm Prebending capacity (full width): 5 mm From pipe diameter: 225 mm Nwsdpfswwt Ddex Almok Standard Equipment: Double linear guide system for roll movement Extra wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported swing arm bearing Electronic Parallelism System EPS Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens PLC control Electric drive for top roll to increase efficiency Safety emergency stop rope and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Leto izdelave: 1966, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 562-66280, Hydraulic bridge punching and cutting machine with a platen that moves forwards and backwards. Work area dimensions: 600 x 2000 mm Maximum oil pressure per cylinder: 400 bar with a diameter of 185 mm = 107 tons per hydraulic cylinder Guaranteed pressing force regardless of load position: 100 tons Machine dimensions: 320 x 170 x 190 cm Nwjdpfx Aoud Rhvjlmek Weight: 4,500 kg The machine is supplied without oil; the oil was drained when the machine was removed All electrical documentation is complete, including warranty certificates for the Sick photoelectric sensors from 1970!

Stanje: kot nova (razstavni stroj), A fully hydraulic WIEGAND demonstration folding machine with NC-10 control manual or automatic bending mode automatic mode: Clamping beam closes, bends to preset angle, clamping beam opens Bending beam or clamping beam can be adjusted manually according to sheet thickness adjustable clamping beam opening width back gauge manually adjustable Nwedopgmqiepfx Almek CE standard Documentation included Bending length: 2500 mm Bending capacity: 2.5 mm max. bending angle: 0 – 120° Back gauge manually adjustable min/max: 60/1000 mm Power: 3.0 kW Weight: 2,500 kg Technical data and dimensions: subject to change without notice For further technical data, please refer to the PDF document.

Stanje: novo, Leto izdelave: 2026, Machine conventionnelle, à commande NC ou CNC, plieuse hydraulique / plieuse à tablier pivotant Longueur de pliage maximale : 2 500 mm Capacité de pliage maximale : Tôle d'acier DC01-A avec une résistance à la traction d'env. 350N/mm² ou matériau S235JR – 4 mm Tôle inox 304L – 2,5 mm Tôle aluminium H24 résistance à la traction env. 145N/mm² – 5,5 mm Tôle de zinc selon DIN EN988 résistance à la traction env. 190N/mm² – 4,5 mm Course de la traverse supérieure jusqu'à 110 mm Angle de pliage maximal : 135° Différentes variantes de butée arrière sont disponibles : - Butée arrière manuelle avec course de 650 mm - Butée arrière à commande NC avec table à brosses - ou butée arrière à commande NC avec supports de tôle + rouleaux à billes – chacune avec plage de réglage jusqu'à 1 470 mm Nsdpfx Aszhkgzolmowk Puissance du moteur : 5,5 kW Dimensions hors butée arrière : env. 3,5 x 1,7 m x hauteur 1,7 m Poids sans remplissage d'huile : env. 4 300 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Vrstna vrtalna stroj s 4 enotami, menjalnikom in podajalnim mehanizmom. Ena enota z napravo za rezanje navojev. Nosilec orodja MK 4. Nodpfx Aljx S U Uyemowk