Elmag Superturn Vario Mit Mfb Vario nakup rabljenega (9.311)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) Iaodpfjh R Taqsx Alaet - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized Iaodpfxemhhy Ns Alaet - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1969, Number: 901895 Pressure: 20 bar Pump: 32 l/min Oil capacity: 125 l Dimensions: 1,400 x 420 x 1,500 mm Footprint: 800 x 420 mm Iaodpfx Alogm Txpjast Weight: 240 kg

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Iaodpfjwauaxex Alaot

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load Iasdey Rkk Iopfx Alaot - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Iasdpfxsy Rkh Hj Alaot Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Iaodpfx Aeykuh Nelaot Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps Iaedpfx Ajyktv Sjlaet TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. Iasdpfx Asx Ta Nxslaot MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck Iajdpfxsykud Rj Alaot MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Ijdpfx Aleyktrtoaeat Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm Iaedpfxjykub Aj Alajt ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. Iasdpjy Drhzsfx Alaot For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. Iasdpfxjy Drfyj Alast The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: MT 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill travel: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight: approx. 275 kg Space requirement: approx. 0.70 x 1.00 x 1.95 m - Factory No.: 138050673 Iaodpfxowlvlae Alaot - Electromagnetic feed - Tapping device - Machine vice, 150 mm - Two T-slot bolts, 14 mm - 9-piece drill bit set 14.5 mm – 30 mm, MT2 / MT3 - Cutting oil spray

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans Isdpfx Alov Hg Eujaoat - Automatic dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, 12-mesečna garancija, brez peči za topila! Iodsttbf Uepfx Alaoat -maks. temperatura 250 °C -skupni parni prostor 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 KW -maks. obremenitev pečnega vozička 6000 kg, električni pogon -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tirnica pred pečjo -lastna teža ca. 3500 kg -prosto stoječa elektro omara dokumentacija električno preverjeno in s trenutnim DGUV merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Vozičkasta peč, peč, industrijska peč, krožna peč, komorna krožna peč, žarilna peč, toplotna peč, sušilna peč, temperirna peč, komorna peč, sušilna omara, kalilna peč,

Stanje: dober (rabljeno), Leto izdelave: 2010, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 400 mm, pomik po osi Z: 500 mm, poteza s peresom: 105 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 1.400 mm, širina mize: 400 mm, skupna višina: 2.150 mm, skupna dolžina: 2.300 mm, skupna širina: 1.800 mm, skupna masa: 3.600 kg, obremenitev mize: 400 kg, Univerzalni rezkalni stroj, zmogljivost vrtanja Ø 80 mm, pomiki X/Y/Z - 1000/400/500 mm, pravokotna miza 1400x400 mm, rezkalna glava vrtljiva in nagibna +30°... -30°, motor 7,5 kW, število obratov 40-1800 vrt/min brezstopenjsko, ISO 50, hod pinole 105 mm, izlet 510 mm, avtomatski podajalniki in hitri pomiki, digitalni prikaz na 3 oseh, hladilna naprava, strojna svetilka, dimenzije 2300x1800x2150 mm, teža cca. 3600 kg, različni dodatki v omari. Iedpfxeyzacbe Alaoat

Stanje: novo, Leto izdelave: 2024, For sale is a robust ELMAG EUROREEL AIR 15 Automatic Hose Reel 42181 with metal housing. This universal hose reel is unused and therefore in mint condition. Technical specifications: - 15 m hose length (PU) Ø 8x12 mm + 2 m connection hose - Max. working pressure: 15 bar - Equipped with Euro-standard coupling (¼") - Weight: 8 kg - Free shipping The hose reel is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! If you are interested in this machine, please provide your complete address details in the contact form so that we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: hose reel, hose drum Iasdpforpl S Uox Alaot Reference: ZEL-42181

Stanje: nepreverjeno (rabljeno), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Isdpfehg Nk Dsx Alasat Heatable/coolable double jacket Enamelled tank

Stanje: nepreverjeno (rabljeno), Volume: approx. 6000 L Type: vertical, supported on three legs Iajdpfxjhg Niqs Alaot Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank

Stanje: nepreverjeno (rabljeno), Volume: Approx. 5000 L Iedpfxehg Nlpe Alajat Type: Vertical, standing on three legs Tank diameter: 2100 mm Heatable/coolable double jacket

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each Another 100 programs can be stored/loaded via FTP or USB flash drive - 2 pcs. circulating air fans - Double door with safety door sensors - Overtemperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motor-driven dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Loading tracks, recess for wheeled loading trolley - Documentation, CE declaration of conformity - Electrical circuit diagram with spare parts list Transportation, installation, and staff training can be offered upon request. This new unit is also available with exhaust air fan and other configurations! Delivery time approx. 10–12 weeks. Contact us! We offer new and used industrial furnaces, which we can also modify and retrofit according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber oven, heating oven, chamber recirculating oven, annealing oven, tempering oven. Iaodpfxelkb Ezs Alaot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, I am selling a combined tunnel for surface finishing, Superfici Elmag Combiline. Configuration: - 1-head roller application machine - Cleaning unit with extraction - 2-head UV drying tunnel - Cleaning unit with extraction Model: Combiline. Working width: 1500 mm Year of manufacture: 2005 Operating hours: 4,600 hours Overall length: 5.30 m Overall width: 2.40 m Isdjiuc R Hjpfx Alaeat Weight: 4,000 kg Available immediately Fully operational.

Stanje: zelo dobro (rabljeno), I am selling a 2-roller coating machine Superfici Elmag FVR. Working width: 1400 mm Very good condition. Fully operational. Iaedpfxeiuc R Ro Alaet Available immediately.