Electroheat Sweden Ab Vagnugn 3978Sh nakup rabljenega (11.769)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, liquid smoke dosing device for smoke chambers; the device is designed to dose into two chambers. Nwedpfx Ajw Emd Heh Usg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, številka stroja/vozila: 2455698, moč: 41 kW (55,74 KM), nosilnost: 750 kg, tip droga: teleskopski, dvižna višina: 26.000 mm, dolžina platforme: 5.480 mm, širina platforme: 2.440 mm, skupna masa: 18.000 kg, transportna dolžina: 5.960 mm, transportna širina: 2.500 mm, transportna višina: 3.200 mm, vrsta goriva: dizel, barva: rdeča, Tehnični podatki Leto izdelave: 2010 Motor: Dizel Delovna višina: 28,00 m Višina platforme: 26,00 m Razširitev platforme: 2,13 m Dimenzije platforme (D x Š): 5,48 m x 2,44 m Skupne dimenzije (D x Š x V): 5,96 m x 2,50 m x 3,20 m Nosilnost: 750 kg Upravljanje: Proporcionalno Njdpfx Aheyqzrzs Uowg Plezalna sposobnost: 40 % Teža: 18.000 kg Hitrost vožnje: 0,7 - 4,0 km/h Pogon na vsa kolesa Običajne sledi uporabe, popolnoma delujoče

Stanje: zelo dobro (rabljeno), Длина 12 метров / ширина по запросу клиента. Также мы можем изготовить различные длины и предлагаем вариант с двумя или одной цепью. Nwjdpfsii Anhex Ah Ueg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, številka stroja/vozila: 2451648, nosilnost: 600 kg, dvižna višina: 30.150 mm, dolžina platforme: 5.800 mm, širina platforme: 1.200 mm, skupna masa: 21.500 kg, transportna dolžina: 6.420 mm, transportna širina: 1.390 mm, transportna višina: 3.190 mm, vrsta goriva: električni, barva: modra, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Technical specifications Year of manufacture: 2017 Engine: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 – 3.0 km/h Gradeability: 25% Nedpfjyqzcaox Ah Uewg Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, številka stroja/vozila: 2451638, nosilnost: 600 kg, dvižna višina: 30.150 mm, dolžina platforme: 5.800 mm, širina platforme: 1.200 mm, skupna masa: 21.500 kg, transportna dolžina: 6.420 mm, transportna širina: 1.390 mm, transportna višina: 3.190 mm, vrsta goriva: električni, barva: modra, obratovalna teža: 21.500 kg, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, zapora diferenciala, Tehnični podatki Leto izdelave: 2018 Motor: Električni Delovna višina: 32,15 m Višina platforme: 30,15 m Podaljšek platforme: 1,90 m Dimenzije platforme: 5,80 x 1,20 m Nazivna nosilnost: 600 kg Vožnja hitrost: 0,7 - 3,0 km/h Vzpenjalna sposobnost: 25% Mere (D x Š x V): 6,42 x 1,39 x 3,19 m Popolnoma delujoč Splošne sledi uporabe Nsdpfx Aheyqytws Uewg

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 24.629 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.650 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 900 kg, skupna masa: 24.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 1.350 m³/h, transportna širina: 2.400 mm, transportna dolžina: 10.000 mm, Good day, We are pleased to offer you, subject to prior sale, a used baler manufactured by Presona AB, model LP 100 CH2 S. The following technical specifications have been taken from the manufacturer's manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 (as of February 2026) Njdpoymmmpefx Ah Uewg Effective pump operating hours: 10,090 Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Feed opening dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic tank capacity: 2,000 L Transport weight (excluding the press after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and films. The baler is in good condition and will be replaced by a new, larger press in July 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this baler is of interest to you. Your service team Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC turning center with sub-spindle, driven tools and true Y-axis, 35° slant bed Nwjdpswwvldsfx Ah Uog Max. swing diameter: 650 mm Max. turning diameter: 320 mm Max. turning length: 550 mm Linear roller guides on all axes Rapid traverse X/Z/Y: 20/20/12 m/min Y-axis travel: 140 mm; +/- 70 mm Turret: 12 stations, BMT55 all 12 driven positions Max. speed: 4000 rpm, 3 kW Main spindle Chuck diameter: 254 mm Spindle nose: A2-8 Max. bar capacity: 75 mm Spindle bore diameter: 86 mm Drive power, direct drive: 15/16 kW Max. speed: 3500 rpm Sub-spindle Chuck diameter: 152 mm Spindle head standard: A2-5 Max. bar capacity: 46 mm Drive power: 11 kW Max. speed: 3,000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard equipment: Parts catcher preparation Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operator manual The machine will be exhibited at EMO, Hall 12/D10, and is immediately available afterwards. A variety of automation systems such as bar feeders and loading robots are available.

Stanje: novo, Leto izdelave: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC Turning/Milling Center with tailstock, driven tools, and real Y-axis travel of ± 70 mm, 35° slant bed, and linear roller guides. Available for viewing in showroom. Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 driven Max. rotational speed: 4,000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options: 65, 75, and 91 mm) Spindle bore diameter: 66 mm Direct drive motor power: 22/30 kW Max. speed: 4,000 rpm Tailstock diameter: 110 mm / MK 3 Tailstock travel: 850 mm Dimensions (WxDxH): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard equipment: Coolant system 3-color warning light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Tools and tool box CE compliance Nedpfxjqa Dtfo Ah Uewg Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 95.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Vers. J18 (adattato F12), vrsta goriva: plin, moč: 2.651 kW (3.604,35 KM), izhodna napetost: 6.300 V, izhodna frekvenca: 50 Hz, nazivna moč: 2.714 kW (3.690,01 KM), Trenutno v obratovanju, do junija 2026. Zamenjava longblocka ob generalnem servisu (68.000 ur). Ob odklopu bo potreben poseg "Minor overhaul". Redno vzdrževano, vključeno v pogodbo o preventivnem in korektivnem servisu z dobaviteljem. Sistem vključuje: - toplotni izmenjevalnik za proizvodnjo pare (Siat 1.168 kW); - transformator SEA, 6.300 --> 21.000 V Različica Dia.Ne: XT 3 Nwsdpfxordx Ddo Ah Usg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 1 x odsesovalec oljne megle Absolent AB A mist 10C s Hepa filtrom Letnik: 2011 V zelo dobrem stanju. Odsesovalno napravo si lahko ogledate v našem skladišču. Njdpfxstp Thbo Ah Uswg

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Rezalni glavi: 2, tip rezalne glave: AWJ 2D, dovod peska: sistem SM4000, tip črpalke: KMT Streamline SL-VI Standard, maks. tlak črpalke: 3800 barov. Dimenzije mize X/Y: 3200 mm/1710 mm, dimenzije rezanja X/Y: 3010 mm/1510 mm, pomik X/Y/Z: 3010 mm/1510 mm/250 mm, hitrost pomika: 12 m/min, razdalja med rezalnima glavama: 90 mm–450 mm, natančnost pozicioniranja: +/-0,075 mm, ponovljivost: +/-0,035 mm, krmiljenje: Fanuc 0i-MF, delovne ure: 4866 h. Vključuje oljni hladilnik, pripravo vode in varnostno območje. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nwedpoxp Rcfefx Ah Usg

Stanje: rabljeno, Leto izdelave: 1962, Funkcionalnost: popolnoma funkcionalen, Adolf John Hanau AB II Construction Timber Saw | Wood Saw | Edging Saw Cutting Height: 105 mm, Throat Depth: 650 mm, Width: 160 mm, Conveyor Belt Speed: 5–45 m/min Single previous owner! Weight with conveyor unit: approx. 1250 kg Connection: 400 V, 32 A Used, fully functional condition Nedpfeuprqwsx Ah Uswg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 480 mm, pomik po osi Z: 475 mm, širina mize: 450 mm, dolžina mize: 1.200 mm, obremenitev mize: 400 kg, skupna masa: 2.300 kg, Ponujamo rabljeni rezkalni stroj Abene Ab VHF-360Ti, letnik 2011. Serijska številka: 36120 Leto izdelave: 2011 Krmiljenje Heidenhain TNC620 Velikost mize: 1200 x 450 mm Največja obremenitev: 400 kg Pomik X: 650 mm, Y: 480 mm, Z: 475 mm Vreteno: BT40 Nwodpfx Ahoy Hgnho Ueg Glavni motor: 7,5 kW Teža: 2300 kg Stroj je v odličnem stanju. Za dodatna vprašanja ali več informacij nas lahko kontaktirate preko sporočila ali po telefonu.

Stanje: dober (rabljeno), Quick-change chuck, quick-change holder, quick-change head, quick-action drill chuck, quick-change insert, interchangeable inserts, milling holder, collet chuck, reducing sleeves, adaptor holders - Quick-change sleeves: 12 interchangeable inserts Nedpfx Aovwal Neh Uowg - Version/Size: Ø 12/14/18 mm, see photos .: 22069-12.0 - Price/Delivery: complete - Transport dimensions (total): 300/245/H70 mm - Weight: 3.9 kg

Stanje: dober (rabljeno), Длина 9,6 м, ширина 1 м Nsdpfsv Scc Tex Ah Uowg

Stanje: dober (rabljeno), Enkelschroef Schroefdiameter 25 mm Afmetingen (LxBxH) 1860 x 900 x 1850 mm Nodpfjvri Ddjx Ah Uowg Opties • Inclusief afhaaltrek • Inclusief koeltrog

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, Nsdpfjv T I Evex Ah Uswg We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Nsdpfx Aoxv Arxeh Ujwg Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. Nwjdpeykqxdofx Ah Ujg • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Arbeitstische: Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 6 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17284006, skupna širina: 1.000 mm, skupna dolžina: 2.800 mm, skupna višina: 1.580 mm, skupna masa: 125 kg, vhodna napetost: 230 V, potreba po zraku: 12 m³/h, zračni tlak: 7 letvica, moč: 0,5 kW (0,68 KM), vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, Polavtomatski stroj za polnjenje tub MF10A, proizveden pri Medipac AB. Kapaciteta polnjenja je približno 24 tub/minuto. Ko je zalogovnik za napolnjene tube poln (pribl. 10 tub), stroj preide v stanje pripravljenosti (Stand by). Ko se napolnjene tube odstranijo iz zalogovnika, se stroj ponovno samodejno zažene, kar omogoča enostavno upravljanje z enim operaterjem. Stroj je opremljen za format Ø25mm tablete in tube z zunanjo premerom Ø29mm. Drugi formati na zahtevo. Dokumentacija (v angleščini) na voljo. Nwjdjxqf Rmepfx Ah Usg

Stanje: dober (rabljeno), Vare: D-1036 - Bulkføder. ABK Sweden Type: STR 301 Bulkføder i rustfrit stål med lukket kar i bunden. Udløbs-/afladningshøjde: 2700 mm Mål: L 3500 x H 2700 x B 1500 mm Kar: B 1500 x L 1450 x H 1350 mm Kar indvendigt: B 900 x L 1050 x H 700 mm Nwodpjn Nxprsfx Ah Uog Skovlhøjde: 100 mm Bredde på transportbånd: 300 mm

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction Nwodpfxjduub Ue Ah Ueg The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels using screws, staples, and/or nails. - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. - Component marking with inkjet. - Gluing. - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: Hidravlična giljotina Proizvajalec: HJO, Švedska Leto: 1984 Največja debelina pločevine: 4 mm Največja dolžina pločevine: 2500 mm Največji delovni tlak: 21,0 MPa V 3 x 380 Hz 50 Teža: 3700 kg Nedpsxgcz Iefx Ah Uowg Hitro nastavljiva reža rezila, talno nožno upravljanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Technical description • Notch depth: 30–115 mm Nsdpsd Arwhefx Ah Uswg • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Stanje: novo, Leto izdelave: 2026, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: • Emergency stop switch on control panel • CE conformity Nsdpfo Nn Hyox Ah Ujwg Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment