Eisele Type Lms I nakup rabljenega (78.201)

Leto izdelave: 1969, stanje: dober (rabljeno), številka stroja/vozila: 1130, Saw blade diameter: 315 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 100 x 60 mm Cutting speed: 17/34 m/min Drive motor: 380 V, 1.8/2.6 kW Space requirement: 1200 x 860 x 1850 mm Weight: 720 kg Lhjdpfed Rxw Sox Ahueh

Leto izdelave: 1979, stanje: dober (rabljeno), številka stroja/vozila: 2001, Saw blade Ø: 400 mm Cutting capacity at 90° (round): 95 x 240 mm Cutting capacity at 45° mitre (round): 75 x 180 mm Saw blade speed: 10.5 / 21 rpm Lhjdpofnrw Sefx Ahueh Drive motor: 380 V, 2.6/3.2 kW Space requirement: 1500 x 1100 x 2150 mm Weight: 630 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Premer žaginega lista: 350 mm Lodjxln Ukopfx Ahujhh Območje rezanja: pri 90° in 45° okroglo: 120 mm pri 90° ploščato: 170 x 100 mm pri 45° ploščato: 120 x 100 mm pri 90° kvadrat: 100 mm pri 45° kvadrat: 95 mm 2 hitrosti vrtenja žaginega lista: 17/34 obr/min Pogon motor: 400 V, 2/2,6 kW Teža: 425 kg Potrebni prostor: 900 x 800 x 1800 mm

Leto izdelave: 1970, stanje: dober (rabljeno), številka stroja/vozila: 1258, Saw blade diameter: 315 mm Cutting capacity at 90° round: 90 mm Lodoh I Dvnjpfx Ahuohh Cutting capacity at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatic, steplessly adjustable Cut-off length: 5 - 1580 mm Saw drive: 380 V, 1.8/2.5 kW Space required: 2300 x 1000 x 2800 mm Weight: 940 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, commande entièrement automatique entraînement 7,5 kW, S6, 400 V, 50 Hz, 2850 tr/min pour l’utilisation de lames de scie D 550 mm plage de coupe 270x140 mm (largeur x hauteur), D 185 mm largeur de profil max. 270 mm commande avec écran avec compteur de pièces avec dispositif de réversibilité pour une longueur de coupe max. 3000 mm arrêt automatique via interrupteur de fin de course en fin de matériau avancement de lame de scie hydropneumatique, réglable en continu, de bas en haut système de serrage vertical et horizontal, côté alimentation et évacuation de la tête de scie dispositif pneumatique de pulvérisation doseuse élargissement de l’écartement de coupe des deux côtés de la lame dispositif d’alimentation électronique 3–600 mm de longueur d’avance, avec vis à billes et servomoteur, avec dispositif de serrage pneumatique horizontal et vertical, longueur de chute à partir de 75 mm, selon le profil Lodpfjyvtyvjx Ahujhh 2 embouts d’aspiration D 100 mm capot de sécurité sur la tête de scie et l’unité d’avance Une installation d’aspiration adaptée peut être proposée en option !

Leto izdelave: 2009, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Lhjdpfx Ahsywtqdoueh Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Omejilnik materiala: vrtljiv 30° - 90° - 45° Vrtljiv omejilnik materiala z zaskoki in prikazom na zaslonu Programska krmiljenja za samodejno nastavitev višine reza, kotov in višine izreza Shranjevanje do 6 programov Hidropnevmatsko podajanje materiala preko dvoročnega upravljanja Pnevmatske vpenjalke za material Mazanje s hladilno tekočino

Stanje: dober (rabljeno), Leto izdelave: 1985, Cold Circular Saw Eisele VMS III S.PV Saw blade feed: manual Vice included Maximum saw blade diameter: 350 mm Mitre cuts from 90° to 30° Cutting capacity (straight cuts): Lodpfx Ajiyzccshuehh - Flat profiles: 200 x 90 mm - Tubes: 120 mm diameter - Square tubes: 90 mm - Solid material: 100 mm Cutting capacity (mitre cuts): - Flat profiles: 140 x 90 mm - Tubes: 120 mm diameter - Square tubes: 90 mm - Solid material: 100 mm Speeds: 34/68 rpm

Stanje: rabljeno, Leto izdelave: 1971, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3229, vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 35 obr/min, največja hitrost vrtenja: 70 obr/min, vhodna napetost: 500 V, Naprodaj je robustna kovinska krožna žaga proizvajalca Eisele, model VMS III. Stroj je klasična hladno-rezalna krožna žaga namenjena industrijski uporabi, ki se odlikuje po stabilni konstrukciji in dolgi življenjski dobi. Idealna za delavnico, kovinsko obdelavo ali ključavničarstvo. Tehnični podatki: • Proizvajalec: Eisele Lhsdpfxey Dc I Sj Ahueh • Tip: VMS III • Leto izdelave: 1971 • Številka stroja: 3229 • Hitrosti: 35 / 70 obr/min • Napetost: 500 V • Moč motorja: ca. 1,8 do 2,6 kW • Frekvenca: 50 Hz • Izvedba: trifazni tok • Z vpenjalom in mehanskim podajanjem Stanje: Rabljeno, glede na starost. Stroj je masivne izdelave in je primeren za obnovo ali takojšnjo uporabo. Vizualno z znaki uporabe.

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Lodow Dvivepfx Ahushh Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: 9182, Offer 23168 Technical Data: - Notching options and miter cuts in 3 planes - Right-angled, single-sided, double-sided, and triple-sided bevel cuts Ljdpfx Aemb U E Aohushh - Can be used as a shifting cut-off saw - Pneumatic profile clamping - Processing with semi-automatic saw units - Saw blade dimensions - vertical: 500 x 3.5 x 40 mm, positive - horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade 60°–90°–25°, motorized positioning with digital display - Saw blade swivel range horizontal with vertical saw blade: - 45° – 90° – 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Manual profile stop shoulder, swivels 30°–90°–45° - Pneumatic coolant spray device - Air supply: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 x D 1400 mm - Weight approx. 1200 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 9155, Offer 24245 Technical Data: - Pneumatic feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. profile height: 190 mm - Max. milling depth: 110 mm - Max. milling length: 400 mm - Angle-adjustable fence, left and right: 20° – 90° – 20° - Milling spindle speed: 2,800 rpm - Drive: 400 V / 2.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per working cycle: approx. 10 l - Digital display (ELGO) for material cross stop Ledpfxotq Taks Ahuehh - Pneumatic profile clamping - Spray system - Footprint: approx. W 1100 x H 1500 x D 700 mm - Weight: approx. 300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Lodpfx Ahoxvbvvouohh Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Pneumatic cross pusher

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1015, profiles with dimensions (HxW) up to 100x195 mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V motor, 2850 rpm cutting disc d=450x3.8x40 mm, z=110 horizontal and vertical material clamping on the infeed side dosing spray installation horizontal material clamping in the feed device both clamping jaws retract when reversing (prevents scratching of the profile) infinitely adjustable hydropneumatic feed of the cutting disc Lhjdewgmv Sjpfx Ahujh cutting disc emerges from the rear cut length adjustable from 0–300 mm (with reversing device 0–600 mm) cut length adjustment by handwheel with mechanical counter maximum cut profile width 200 mm cutting range (height x width) 100x195 mm, 80x200 mm automatic shut-off when material is depleted possibility to connect an extraction unit

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Max. profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Feed movement radial from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable saw blade speed - Metered spray unit - 2 vertical and horizontal clamping units, each with clamping pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually opening safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm Ljdpox Eb Anjfx Ahujhh - Height with hood open: 2450 mm PD200-E-7 length measuring system - Usable as a stop or as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target size, actual size and piece count - Positioning accuracy 0.1 mm/m - Piece counter for number of completed parts/cuts

Leto izdelave: 1999, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication Lhedpfevmz R Sjx Ahujh

Leto izdelave: 1997, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Ledpfx Aex Ecg Uohushh Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Stanje: rabljeno, Leto izdelave: 1981, Speed 40/80 rpm Machine No.: 0025 Ljdpfxevu Hlkj Ahujhh Voltage 380 V Clamping: yes kW Mitre: yes Weight: 700 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Lhsdpfx Ahjvtarneush Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.

Stanje: rabljeno, Leto izdelave: 2021, Za dodatne informacije se obrnite na Center za rabljeno opremo. Ledpfx Aezfn Uwshuehh

Stanje: novo, Good day, we are offering a new flame detector from LOOS for sale. Lhjdpfxjw A I Afs Ahush

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 7 h, ABB 2600-12/1.85 Tip B + Trackmotion 2,9 metra, kompletno kot novo, DTC 7 ur, leto 2019 RAZVOJ GSG ROBOTICS Lhedpfx Ajyl Avqehujh GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marl od leta 2015, z obsežnim servisnim območjem za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celovitega partnerja na vseh področjih v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za znana proizvajalca robotov ABB in Fanuc.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 28.110 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Robot: 4600-101310 & 4600-101311 / Controller: 4600-101312, skupna masa: 1.130 kg, nosilnost: 60 kg, doseg roke: 2.050 mm, ABB industrial robots as a dual system, consisting of 2x IRB 4600-60/2.05 Type C units and IRC5 M2004 dual controller for industrial automation processes. The condition is used and tested. Typical applications include handling, assembly, machining, and synchronized automation tasks. Payload capacity is 60 kg with a reach of 2050 mm. Year of manufacture: 2014, with 28,110 operating hours and RobotWare 5.15.9100.10 software. Comes equipped with ABB FlexPendant teach pendant, cable sets for motor and data connections, as well as the following software options: MultiMove Independent 604-2, Multitasking 623-1, PROFINET IO master/slave, DeviceNet Master/Slave, PC Interface, and HOMEPOSRUNNING V6.03. Lodpfxszamk Ij Ahuehh

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Robot: 24-50924 / Controller: 24-50924, skupna masa: 534 kg, nosilnost: 10 kg, doseg roke: 1.550 mm, Industrieroboter ABB mit Manipulator IRB 2400 M2004 (IRB 2400/10 Typ B Standard) und IRC5 M2004 Steuerung für industrielle Automatisierungsanwendungen. Der Zustand ist gebraucht und geprüft. Typische Einsatzbereiche sind Handling, Montage, Bearbeitung und allgemeine Automatisierung. Die maximale Traglast beträgt 10 kg bei einer Reichweite von 1550 mm. Baujahr 2006, mit 66.804 Betriebsstunden und Software RobotWare Version 5.16.0005.00. Ausgestattet mit Hauptverbindungskabel zwischen Manipulator und Steuerung, FlexPendant DSQC 679 Programmierhandgerät sowie den Software-Optionen Deutsch, Weltzonen, Feste Positionsereignisse, Bahnwiederherstellung, Datei- und serielle Schnittstellenverarbeitung, logische Querverbindungen und Analogsignal-Interrupt. Lhodpfjzamkhex Ahujh

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 16.215 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Robot: 2600-104749 / Controller: 2600-104749, skupna masa: 422 kg, nosilnost: 20 kg, doseg roke: 1.650 mm, Industrijski robot ABB sa manipulatorom IRB 2600-20/1.65 Type A i upravljačkom jedinicom IRC5 M2004 namenjen za industrijske automatizacione aplikacije. Stanje: korišćeno i testirano. Tipične primene uključuju rukovanje, montažu, obradu i opštu automatizaciju. Nosivost iznosi 20 kg uz radijus dosega od 1650 mm, godina proizvodnje 2015, sa 16.215 radnih sati i softverom RobotWare 5.61.8001.08. Opremljen FlexPendant ručnim programatorom, napojnim kablom i 2x kompletom poveznih kablova. Lhodpfozamiqox Ahuoh

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 12.310 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 575 kg, nosilnost: 45 kg, doseg roke: 2.050 mm, Industrijski robot ABB sa manipulatorom IRB 4600-45/2.05 Type C i kontrolerom IRC5 M2004 za industrijske automatizacijske primene. Stanje: polovano i testirano. Tipične primene uključuju rukovanje, montažu, obradu i opštu automatizaciju. Nosivost iznosi 45 kg sa dohvatom od 2050 mm. Godina proizvodnje: 2013, sa 12.310 radnih sati i softverom RobotWare 5.15.0266.00. Opremljen je FlexPendant teach pendant-om, 2x setom priključnih kablova i mrežnim kablom. Lodpfx Aozamidohujhh