Droblilna Naprava / Drobilnik Kamnin nakup rabljenega (7.533)

Stanje: dober (rabljeno), Leto izdelave: 2000, Temperirna enota Kdjdpfx Asgvddpsf Dol Skupne dimenzije: 600 x 700 x 1600 mm Teža: 157 kg Moč: 6 kW Napetost: 230 V Vrsta hladiva: R134a

Stanje: rabljeno, Potopna elektroerozijska stroj (Die Sinking EDM) Proizvajalec: AEG-ELOTHERM - tip: ELBOMAT 443B - skupne dimenzije: 2600x2500x3300 mm - dimenzije delovne mize: 1200x800 mm - miza za orodja: 280x200 mm Stanje: Ni testirano! Ksdpfx Aeyykr Dsf Dsdl Električna omara - skupne dimenzije: 1200x1500x2200 mm Hladilna enota - skupne dimenzije: 1200x1100x2200 mm

Stanje: rabljeno, Temperirna enota HB-Therm HB-100 U1, Temperiranje, Temperiranje tekočin, Industrijsko temperiranje, Termolator, Rabljeni stroj Proizvajalec: HB-Therm Tip: HB-100 U1 Skupne dimenzije: 200 × 650 × 500 mm Leto izdelave: 2008 Kedpfx Aox Emfwof Dodl Tehnični podatki: Maksimalna delovna temperatura: 100°C Grelná moč: 8 kW Hladilna zmogljivost: 30 kW Medij za prenos toplote: voda

Stanje: rabljeno, Drovalnik, Erdwich M700/1-600, rabljeni stroj Kodpfx Aox I Dmwof Dedl Proizvajalec: Erdwich Tip: M700/1-600 Leto: 2013 Moč: 2 × 22 kW Skupne dimenzije: 1750 × 1820 × 1810 mm Teža: pribl. 3.500 kg Velikost lijaka: 650 × 580 mm × 2

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 1.200 h, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.250 mm, No. 04531 Four-Shaft Shredder / WEIMA ZM 30 Used, year of manufacture: 1999, approx. 1,200 operating hours, machine in very good condition The four-shaft shredder is designed for bulky and very long wood waste such as boards, pallets, packaging, and all types of cardboard. It is also capable of shredding various plastics. The resulting wood chips are immediately suitable for use as heating fuel. Special post-crushers prevent chips from being too long. Hopper opening: 1250 x 1000 mm (LxW) Cutter width: 462 mm Cutter length: 562 mm Cutter disc diameter: 235 mm Rotational speed: approx. 25 rpm 2 motors, each 7.5 kW Throughput capacity: between 350–1250 kg/hour (depending on material and screen hole diameter) Protection: 50 / 63 A Extraction port diameter: 200 mm GS-tested, CE-compliant Cutting tools can be sharpened with an angle grinder or bench grinder (see operating manual). The entire cutting unit can be replaced. Includes technical documentation Includes electrical connection cable with plug Transport dimensions: approx. 1450 x 1250 x 2150 mm (LxWxH) Kdjdpfsy Tpg Tsx Af Del Weight: approx. 1300 kg To avoid misunderstandings, on-site inspection is possible and recommended by prior appointment. Sale is made in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sold 'as inspected'. Payment terms: Prices plus statutory VAT, payment required before collection or shipping. Delivery terms: ex works

Stanje: rabljeno, Leto izdelave: 1977, Ta industrijska odporovna varilna naprava SCHLATTER tip GPu 300/250 bo prodana na naši spletni dražbi RESTLOS 'Optimizacija lokacije - gasilska vozila, prikolice, kontejnerji, transportne škatle, skladiščni sistem Paternoster'. Dodatni podatki o stroju: Industrijska odporovna varilna naprava švicarskega proizvajalca Schlatter SCHLATTER varilna naprava tip GPu 300/250, serijska št. S1.3644.1095, letnik izdelave 1977; primarna napetost 380 V / 3-fazno / 50 Hz, navidezna moč 196,87 kVA, varilni tok 230 A / 795 A, potreba po hladilni vodi 30 l/min pri 4 bar. kot prikazano, funkcionalnost ni preverjena Kodpfxjy Takvo Af Djdl brez morebitnih drugih na sliki prikazanih postavk

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Fröhling sistem za sekance 500kW vklj. zalogovnik toplote. Odvzem s potisnim dnom za polnjenje. Samodejni polnilni in uplinjevalni sistem (star 2 leti). Omrežna črpalka vklj. upravljalnik za daljinsko ogrevanje. Cena po dogovoru. Kedpfx Asy Ti Evsf Djdl

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Motor: 7,5 kW Širina rotorja: cca 82 cm Teža: 1.460 kilogramov Polna obremenitvena toka: 32 A Kedpjxbyx Tefx Af Dsdl Predvarovalka: 35 A

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Kodpfx Aox Af Rdjf Dodl Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Kdodpfx Afsdwktke Dsl Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V Kedpfx Aforb D Ne Dodl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Kjdpfedv Eu Hsx Af Dsdl Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: Kodpsd E R D Sefx Af Djdl - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling Kdjdpfx Aod Hkqhjf Dol - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Kjdpox Tfdhofx Af Dodl Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: rabljeno, Leto izdelave: 2004, Potopna erozijska stroj Proizvajalec: Exeron Tip: 312 Leto izdelave: 2004 Krmiljenje: MF10 Pomiki X/Y/Z: 450 x 300 x 300 mm Delovna miza: 820 x 400 mm Delovni rezervoar: 900 x 520 mm Razdalja miza / pinola: 150 / 450 mm Maks. masa elektrode: 30 / 150 kg Maks. masa obdelovanca: 800 kg Višina napolnitve delovne posode: 300 mm Kodsytrz Sspfx Af Dedl 20-kratni menjalec orodja Generatorni tok: 60 A Priključna napetost: 400 V Trofazni tok: 50 Hz Moč: 8 kVA Skupne dimenzije D/Š/V pribl.: 1.910 x 1.798 x 2.300 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Moč motorja: 9 kW Dimenzije rotorja: 240 x 400 mm Število rezil: 11 Kdjdpfx Afsy N Sk Tj Dol Proizvodnja: 80/170 kg/h Proti rezilo iz kaljenega jekla 1 mreža (nameščena) z luknjami Ø 10 mm 1 dodatna mreža z luknjami Ø 8 mm Razželezovalna letvica

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava za čiščenje delov, IBS – rabljeno - : Cena na kos: 350 € (neto) Proizvajalec: IBS Scherer GmbH Tip: Tip F2 Leto izdelave: 2003 Serijska številka: 44675 Kdsdpex El A Uofx Af Djl Električni priključek: 1/N/PE 230V, 50Hz Nazivna moč: 18W, 0,2A Nosilnost: 60 kg Širina: 800 mm Lastna teža: 50 kg Velikost soda: sod 50 litrov Material ogrodja: jeklo Višina: 1125 mm Vrsta čiščenja: specialno čistilo Širina čistilnega korita: 790 mm Globina čistilnega korita: 540 mm Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 2.607 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, For sale: As-new PEMTec PEM800 from 2019. The machine can be inspected and tested under power. Operating hours: 9,880 PEM hours: 2,607 Pulse output current: 6,000A HOW THE PROCESS WORKS Metal parts are machined contactlessly and precisely using this process. An electrically conductive electrolyte (saltwater) is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). The ionized material is carried anodically out of the machining gap between the electrode and the workpiece. During the process, the electrode is mapped inversely onto the metal. The targeted current pulse, oscillating tool electrode, and extremely small working gap form the foundation for this technology's precision. The PECM process is the further development of electrochemical sinking (ECM). By utilizing synchronized current pulses and an oscillating tool electrode, PEMTec enables an extremely small machining gap. This allows for ultra-precise and cost-effective production with no process-related tool wear. Absolutely contactless machining without thermal or mechanical influences produces workpieces with imaging accuracy and repeatability in the lower micrometer range and surface finishes as fine as 0.03 µm. TECHNICAL DATA - Machine frame made of natural granite - Usable working area: 375–545 mm (min./max.) - Machine table: 660 × 540 mm (W × D) - Installation footprint: 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment system - Maintenance-free precision working axis with direct drive - Workholding fixture via 6 T-slot rails (M10) in the machine table Ksdpfx Afsy Etcvj Djdl - Real-time system for process control and short-circuit detection - HMI via 21.5-inch touchscreen - Water-cooled, modular generator from 1,200 A to 12,000 A - Automatic electrolyte treatment system - Optional XY alignment aid and C axis - The electrolyte system’s output is optimally matched to the application—standard systems starting from 1,000 or 2,000 liters

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30160328026, moč: 210 kW (285,52 KM), vrtljajska hitrost (min.): 1.500 obr/min, vrsta hlajenja: voda, nazivna moč: 210 kW (285,52 KM), Ta kogeneracijska enota izvira iz investicije, ki nikoli ni bila dana v obratovanje. Kdjdpsyzcxrsfx Af Del

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. Kdsdpfx Afey Tiyyj Dol The plant consists of: • Feed conveyor belt • Load-dependent control system for the feed belt • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower • Screening machine • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Stanje: rabljeno, Twin-shaft shredder Drive power: 37.50 kW Kdedsy Th Naspfx Af Dol

Stanje: novo, Leto izdelave: 2024, Odsesovalna naprava SAF STK-6500 je primerna za vsako mizarsko delavnico, ki potrebuje kvalitetno, tiho in varno odsesovalno napravo. Namenjena je za odsesovanje lesnega prahu in žagovine iz celotne manjše mizarske delavnice ali za odsesovanje žagovine iz stroja, ki ima večjo porabo odsesovalnega zraka (kontakna brusilka, CNC stroj, robna lepilka,...). Odsesovalna naprava ima 45 hlačnih filtrov s premerom 160 mm in dolžino 940 mm, kar zagotavlja večji pretok zraka kot podobni stroji z manjšim številom filtrov. Kjdof D S T Iepfx Af Dodl PODATKI: - Moč motorja (kW) 7,5 - Največja kapaciteta odsesovanja (m3/h) 6500 - Hitrost Pretoka (m/s) 32 - Površina filtriranja (m2) 21,25 - Volumen zalogovnika (l) 580 - Premer odsesovalne odprtine (mm) 300 - Teža (kg) 460 - Zunanje dimenzije stroja (DxŠxV) 2405 x 1170 x 2250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 500 mm, Sinker EDM Machine Agietron Hyperspark 3HS for sale in good condition. Fully functional and available for inspection under power. We are happy to provide you with a video of the machine. Includes all documentation and magnetic clamping plate. Loading by us is possible. Technical machine data: Agietron Hyperspark 3HS • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIETRON HYPERSPARK 3 HS • Year of manufacture: 2006 (with CE marking) • Serial number (unit): 306 • System list no.: 592.031.206 • Circuit diagram no.: 500.753.322 Electrical connection values & performance • Voltage: 3 x 400 V Kdedpsy Snl Ejfx Af Dol • Frequency: 50 Hz • Power: 8.3 kVA • Rated current: 12 A • Short-circuit current: 10 kA • Control / version: CNC01D HS9 HYPERSPARK (Ident. version: 05.05.01) Weight & components • Total weight: 3800 kg • Subcomponents (serial numbers): o Hyperspark 3 (unit): serial 306 / device list 007.354 o ATH3 Hyperspark: serial 7 / device list 500.059.354 o Cabinet Hyperspark (control cabinet): serial 14 / device list 500.059.324 If you have any questions, please do not hesitate to contact us.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, portable crusher that reduces material using a fixed and a movable jaw. - Crushing principle: Jaw crusher – large, wear-resistant manganese steel jaws. - Feed opening: approx. 700 mm × 400 mm – this is the maximum material size the crusher can accept at once. - Capacity: up to approx. 45 tonnes/hour (depending on material quality). - Power: Diesel engine (e.g. Deutz, approx. 66–70 HP, actual engine may vary by model). - Output size: adjustable from coarse to fine (e.g. 10–120 mm), allowing for variable grain sizes of the crushed material. - Mobility: Tracked or rubber-wheeled chassis → easily maneuverable on site. - Controls: often via radio remote control. Kdodpfxjy It Tge Af Del What is it used for? - Crushing construction debris - On-site reduction of concrete, reinforced concrete, bricks and stones for reuse or easier handling - Recycling