Aft Enojni Odlagalec nakup rabljenega (1.789)

Stanje: rabljeno, Leto izdelave: 1989, Pritisk 080 t Izmet 300 mm Hod 8 - 140 mm Število hodov 60 / 90 /min Razdalja miza/bat, največji hod zgoraj, nastavljiv zgoraj 420 mm Površina mize 800 x 600 mm Odprtina v mizi 330 x 230 mm Miza nastavljiva 230 mm Višina mize nad tlemi 750 - 980 mm Površina bata 600 x 240 mm Nastavitev bata 100 mm Pogonska moč 4,5 / 6,9 kW Teža 5,5 t Potrebni prostor (ŠxGxV) 1,4 x 2,5 x 2,6 m Hnodpfx Aevuuavehuol Odobreno za ročno polaganje po nemških predpisih o varnosti pri delu (UVV) s motorjem z dvema hitrostma hoda, hidravlično sklopko-zavorno kombinacijo, hidravlično varnostno zaščito proti preobremenitvi na batu, ročnim nastavljanjem hoda, ročnim nastavljanjem bata, nastavljivo mizo, centralnim ročnim mazanjem, dvoročno in nožno upravljanje.

Stanje: rabljeno, Leto izdelave: 1977, Tlak 250 t Hod 40 - 190 mm Število hodov 40 /min Izsev 500 mm Prehod med stranicami ohišja 1050 mm Vgradna višina 615 mm Površina mize 1380 x 880 mm Prehodna odprtina v mizi 450 mm Višina mize nad tlemi 800 mm Površina drsnika 1200 x 800 mm Nastavitev drsnika 125 mm Pogonska moč 22,0 kW Teža 24,0 t Hnsdpfxevuuais Ahuel Prostorska potreba ca. 2,0 x 2,5 x 3,95 m x m x m Odobreno za ročno podajanje v skladu z nemškimi predpisi o preprečevanju nesreč (UVV) z motorjem, pnevmatsko kombinacijo sklopke/zavore, hidravlično prenapetostno zaščito v drsniku, pnevmatskim izravnalnikom teže drsnika, motorizirano nastavitvijo drsnika, ročno nastavitvijo hoda, motoriziranim centralnim mazalkam, pritrditveno ploščo, dvoročnim upravljanjem.

Stanje: rabljeno, Leto izdelave: 1977, Tlak 80 t Hod 8 - 112 mm Število hodov 65 /min Iztegovanje 345 mm Hnsdpfxjvut Npe Ahuel Prehod med stenami ohišja 500 mm Vgradna višina 472 mm Površina mize 840 x 610 mm Prehodna odprtina v mizi 280 / 315 mm Višina mize nad tlemi 800 mm Površina drsnika 650 x 410 mm Nastavitev drsnika 71 mm Pogonska moč 13,5 kW Teža 6,10 t Prostorske zahteve pribl. 1,5 x 1,9 x 3,0 m S polno spreminjanjem motorja, pnevmatsko kombinacijo sklopke/zavore (Ortlinghaus), mehansko zaščito pred preobremenitvijo v drsniku, ročno nastavitvijo hoda, motorizirano nastavitvijo drsnika, fiksno mizo, motoriziranim centralnim mazanjem, dvorokim upravljanjem.

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. Hnjdpsvut Ncjfx Ahusl The machine can be inspected under power at our warehouse.

Stanje: rabljeno, Leto izdelave: 2000, Tlak 0,75 t Izteg 295 mm Hod 16 - 140 mm Število hodov 75 / min Razdalja miza/bat, maksimalni hod zgoraj, zgornja nastavitev 450 mm Površina mize 800 x 595 mm Prebojna odprtina v mizi 330 x 230 mm Višina mize nad tlemi 745 mm Površina bata 470 x 180 mm Nastavitev bata 80 mm Pogonska moč 5,5 kW Teža 5,0 t Prostorske zahteve (ŠxDxV) 1,5 x 2,5 x 2,5 m Hnsdpfxjvut Hhs Ahuel Prenova s strani proizvajalca 2000 Z motorjem, pnevmatsko sklopko, mehanskim preobremenitvenim varovalom v batu, ročnim nastavljanjem hoda, ročno nastavitvijo bata, fiksno mizo, motoriziranim centralnim mazanjem, dvoročno in nožno upravljanje.

Stanje: rabljeno, Leto izdelave: 1977, Tlačna sila 80 t Iztek 280 mm Hod 8 - 112 mm Hnodpfx Ahovut E Reusl Število hodov 30 - 120 /min Razdalja miza/klin, največji hod zgoraj, nastavitev zgoraj 500 mm Površina mize 840 x 580 mm Prebojna odprtina v mizi 150 mm Višina mize nad tlemi 910 mm Prehod med stenami ohišja 640 mm Površina klina 560 x 300 mm Nastavitev klina 80 mm Pogon 7,5 kW Teža 8,0 t Prostorska potreba (ŠxGxV) 1,6 x 2,3 x 3,3 m S stopenjsko nastavljivim pogonom, pnevmatsko sklopko, hidravlično prenapetostno zaščito v klini, ročnim nastavljanjem hoda, motornim nastavljanjem klina, nagibna, ročna centralna mazalna, dvoročna in nožna upravljanja.

Stanje: rabljeno, Leto izdelave: 1995, Tlak 063 t Izvleček 260 mm Hod 12 - 120 mm Število hodov 30 - 130 / min Razdalja med mizo in batom, največji hod zgoraj, nastavitev zgoraj 495 mm Površina mize 800 x 560 mm Prebojna odprtina v mizi 220 mm Višina mize nad tlemi 800 mm Hnjdjvut Ewspfx Ahujl Prehod med stranskimi stenami 270 mm Površina bata 450 x 360 mm Nastavitev bata 120 mm Pogonska moč 5,5 kW Teža 5,0 t Dimenzije (ŠxGxV) 1,8 x 1,5 x 2,7 m Dovoljeno samo za avtomatsko delovanje v skladu s CE standardom S brezstopenjsko nastavljivim pogonom, pnevmatsko kombinacijo sklopke/zavore, mehanskim zaščitnim preobremenitvenim sistemom v batu, fiksna miza

Stanje: rabljeno, Leto izdelave: 1962, Tlak 060 t Izmet 220 mm Hod 6 - 94 mm Število hodov 115 /min Razdalja med mizo in batom, največji hod zgoraj, največja nastavitev zgoraj 340 mm Površina mize 680 x 400 mm Odpiralna odprtina na mizi 120 x 70 mm Višina mize nad tlemi 750 mm Prehod med stenami ohišja 290 mm Površina bata 240 x 240 mm Nastavitev bata 57 mm Pogonska moč 3,7 kW Teža 2,8 t Prostor potrebujem (ŠxGxV) 1,5 x 1,5 x 2,2 m POSEBNA AKCIJA Hnsdpfxoyq Sl Se Ahujl v stanju, kot je, BREZ dodatnih del brezplačno nakladanje na tovornjak

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Hnsdpeg Iy Dujfx Ahuol Glue system: EVA, laser Jointing cutters: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 units

Stanje: rabljeno, Leto izdelave: 1997, obratovalne ure: 3.861 h, skupna masa: 1.500 kg, premer rotorja: 235 mm, skupna dolžina: 2.500 mm, skupna višina: 2.500 mm, skupna širina: 1.500 mm, širina rotorja: 794 mm, moč: 11 kW (14,96 KM), širina odprtine za polnjenje: 800 mm, dolžina polnilne odprtine: 1.000 mm, No. 04527 Single-Shaft Shredder Vecoplan VAZ 100/80 U40 Used, year of manufacture 1997, 3,861 operating hours The VAZ 100/80 residual material shredder is designed for shredding waste wood, pallets, boxes, chipboard and fibreboard, paper and cardboard, plastics, etc. The machine is most commonly used to produce fuel chips from residual wood, wood waste, and pallets. Infeed cross-section: 1000 x 800 mm (L x W) Universal rotor, tool size 40 Electrical connection rating 13 kW, drive power 11 kW Throughput (solid wood): 250 – 350 kg/h Hnedey Hlgiepfx Ahuel Throughput (chipboard): 800 – 1000 kg/h Screen hole diameter: 25 mm Rotor diameter: 235 mm, rotor width: 794 mm, speed: 95 rpm Rotor mounted in pendulum roller bearings with steel housing Feed unit made of profile steel, driven by hydraulic cylinder Feed guided in brass rails, laterally guided by rollers Main drive via gear motor with two-stage worm gearbox Motor speed: 95 rpm Automatic foreign body breakage protection PLC control, automatic/manual operation Hydraulic unit with 2 working speeds 2 side extraction ports, each 200 mm Currently, the machine is set up so that the chip material falls downwards. If the bottom opening is sealed, an extraction system can be connected. Includes 1 new counter-blade, various cutting blades, complete technical documentation Transport dimensions approx. 2500 x 1500 x 2500 mm (L x W x H) Weight approx. 1,500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner; no guarantee. Prior sale reserved. For used machines, any warranty is excluded; applies: “purchased as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock

Stanje: rabljeno, Swing diameter 2000 mm Turning height 1800 mm Control system Siemens Sinumerik 840 Dsl Spindle speed range 2.8-315 rpm Cross rail adjustment - vertical 1200 mm Cross rail adjustment - horizontal +/- 1150 mm Tool slider - vertical travel 1500 mm Tool slider section 240 x 240 mm Minimum plunge diameter 340 mm Cutting force 50 kN Torque at faceplate 50,000 Nm Speed range level 1: 2.8 - 80 rpm Speed range level 2: 12 - 315 rpm Maximum clamping weight 12,000 kg Faceplate drive power 105 kW Machine weight approx. 33 t Space requirement approx. 10 x 5 x 6.5 m Additional Technical Data: - Feed range (three-phase servo motors): 1-3000 mm/min; 0.01-50 mm/rev - Cross rail travel speed: 425 mm/min Equipment / Accessories - Increased turning height (+600 mm) - Extension of Z-axis to 1500 mm - Tool magazine positions: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw touch probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Refurbishment: - Extensively refurbished in 2012 by Siemens Industry Munich Hjdoy Dvlqjpfx Ahujnl - Among other things, the following were reconditioned: control system, wiring, motors, measuring systems, etc. - Further information can be found in the PDF

Stanje: rabljeno, Višina obdelovanca - maks. 2.320 x 1.010 mm Moč 33 kW Hnjdpew Na Ulofx Ahujl Na voljo 2 kosa Membranska stiskalnica Orma PM/AFT za premazovanje enostransko profiliranih obdelovancev z avtomatskim sistemom za nalaganje in razlaganje.

Stanje: rabljeno, Pressure: 35 t Reach: 220 mm Stroke: 10 - 120 mm Strokes per minute: 120 spm Ram adjustment: 50 mm Table surface: 590 x 440 mm Hnedpfx Ahsykb Dqjusl Ram surface: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Features: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work will be carried out in our workshop: - Complete disassembly of the press, cleaning, and technical inspection - Removal of shaft, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Enzian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control and touch display Operation via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) as agreed with the end customer, Standard 0.8-1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand operation - Current accident prevention inspection (UVV) with braking time measurement After modernization, the machine is approved for manual loading operations at open tooling.

Leto izdelave: 2020, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Unused single-screw laboratory extruder Hedpfxefw Rige Ahuonl Screw diameter: 25 mm / 25 L/D Motor: 2.2 kW Strand die Touch display Hopper included Suitable for use as a laboratory extruder. Water bath and granulator available. Test run possible by arrangement.

Stanje: rabljeno, Leto izdelave: 2002, Tlak 80 t Iztek 300 mm Hod 8-110 mm Število hodov 100 hod/min Nastavitev batnice 75 mm Površina mize 750x590 mm Površina batnice 540x400 mm Prehodna odprtina v mizi 200x200 mm Višina mize 780 mm Oznanina v batnici Ø 40 mm Hnodpfx Ahsy I Dd Njusl Skupna potrebna moč 11 kW Teža stroja cca 5,5 t Prostorske zahteve cca D׊×V 1200x1700x2700 mm Hidravlična kombinacija sklopke in zavore, pnevmatsko upravljana Centralno mazanje z mastjo Polavtomatska nastavitev hoda Hidravlično prenapetostno varovanje Motorizirana nastavitev batnice Izravnalni valj batnice Prednji nasprotni ležaj

Stanje: rabljeno, Leto izdelave: 2008, Pritisk 40 t Izvlek 230 mm Hod 4-100 mm Delovna površina mize 650x450 mm Delovna površina bata 420x220 mm Nastavitev bata 85 mm Prehodna odprtina v mizi 170x220 mm Višina mize 800 mm Število hodov 60 hodov/min Vgradna višina 375 mm Dimenzije (VxŠxG) 2800x1200x1900 mm Teža stroja ca. 3,2 t Serijska številka: 54579 Centralno mazanje Mehanska lomna plošča v batu Nastavljiva miza Hidravlična sklopka-zavorna kombinacija Poseben krmilni omarica Dvoročno upravljanje Hnjdpfx Ajy I Ddvshuel Nožno stikalo Odobreno za ročno polaganje

Stanje: rabljeno, Leto izdelave: 1976, Tlak 032 t Izmet 280 mm Fiksna hoda 140 mm Broj hodova 120 /min Udaljenost sto/klip, maks. hod gore, regulisano gore 370 mm Površina stola 700 x 550 mm Otvori u stolu 260 x 260 mm Visina stola iznad poda 860 mm Prolaz između bočnih stranica tela 350 mm Površina klipa 320 x 300 mm Podešavanje klipa 63 mm Težina 3,0 t Prostor potrebnan (ŠxDxV) 1,2 x 1,4 x 2,4 m Hsdpfx Ajyx Imiehuonl Dozvoljeno za ručno ubacivanje radnih komada prema nemačkim propisima o sprečavanju nezgoda (UVV) Presa ima FIKSNI hod sa motorom, pneumatskom spojkom, FIKSNIM hodom, ručnim podešavanjem klipa, fiksnim stolom, motornim centralnim podmazivanjem, dvostrukom ručnom i nožnom komandnom može se ponuditi iz našeg skladišta sa ili bez novog Pilz upravljača, spremna za puštanje u rad

Stanje: rabljeno, Leto izdelave: 1959, Tlak 063 t Iztek 280 mm Hod 8 - 100 mm Število hodov 65 /min Razdalja med mizo in batačem, največji hod zgoraj, nastavitev zgoraj 550 mm Površina mize 630 x 500 mm Prebojna odprtina v mizi 230 mm Višina mize nad tlemi 740 mm Nastavljiva miza 200 mm Hnsdpjyx Ih Hsfx Ahuol Površina batača 320 x 260 mm Nastavitev batača 63 mm Pogonska moč 5,5 kW Teža 4,6 t Prostor potreben (ŠxGxV) 1,4 x 1,8 x 2,4 m Dovoljena za ročno podajanje po nemških predpisih za preprečevanje nesreč (UVV) z motorjem, trenjsko sklopko, mehansko zaščito pred preobremenitvijo na bataču, ročnim nastavljanjem hoda, ročno nastavitvijo batača, nastavljivo mizo, centralnim ročnim mazanjem, dvoročno upravljanje Stiskalnica je trenutno v prenovi

Stanje: rabljeno, Leto izdelave: 1961, Tlak 63 t Iztek 270 mm Hod 8 - 100 mm Število hodov 115 /min Razdalja miza/bat, veliki hod zgoraj, nast. zgoraj 415 mm Velikost mize 620 x 500 mm Prebojna odprtina v mizi 200 mm Višina mize nad tlemi 800 mm Površina bata 305 x 260 mm Nastavitev bata 63 mm Pogonska moč 7,5 kW Teža 4,0 t Dimenzije (ŠxGxV) 1,3 x 1,7 x 2,35 m POSEBNA AKCIJA Hnsdpfxsvuuc Rj Ahuol prodan kot stoji in leži, BREZ dodatnih del prosto naloženo na tovornjak

Stanje: rabljeno, Leto izdelave: 1957, Tlak 100 t Izvlek 315 mm Hod 30 - 160 mm Število hodov 40 /min Razdalja med mizo in batom, velik hod zgoraj, nastavljivo zgoraj 460 mm Površina mize 910 x 680 mm Prehodna odprtina v mizi 400 mm Višina mize nad tlemi 800 mm Prehod med stenami ohišja 400 mm Površina bata 630 x 400 mm Nastavitev bata 80 mm Pogonska moč 7,5 kW Teža 7,5 t Potrebni prostor (ŠxGxV) 1,7 x 2,0 x 3,0 m POSEBNA AKCIJA Hodpjvzxnwofx Ahujnl prodaja se kot stoji in leži BREZ zagona / BREZ drugih del natovorjeno na tovornjak brezplačno

Stanje: rabljeno, Leto izdelave: 1972, Planscheibendurchmesser 1200 mm Umlaufdurchmesser 1600 mm Drehhöhe 1250 mm Supportverstellung 800 mm Steuerung Siemens Typ 840 c Antriebsleistung 56 kW Mašina je remontovana i prepravljena u firmi Seidler Br. 97237 Br. 37 Tehnički podaci su prema navodima proizvođača, odnosno korisnika i stoga za nas nisu obavezujući. Zadržavamo pravo na međuprodaju; važe isključivo naši opšti uslovi poslovanja i prodaje. O nama više od 400 vlastitih mašina na lageru preko 15.000 m² skladišnog prostora, dizalična kapacitet 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite da prodate mašine, proizvodne linije ili svoju firmu, obratite nam se. Dodatne ponude možete pronaći na našem veb sajtu. Pregled mašina moguć je uz prethodni dogovor. Hsdsyqvfijpfx Ahuonl Radujemo se vašoj poseti. Vaš Markus Hirsch tim

Stanje: rabljeno, Leto izdelave: 2009, Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1500 mm Control: SIEMENS 840 D Max. workpiece weight: 5,000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 – 320 rpm Table drive power: 100 kW Torque: 31,784 Nm Total connected load: 218 kW Machine weight approx.: 55 t Hjdjvyliljpfx Ahuenl Turning and boring heads: - 4 x turning heads + turning tool holders - 3 x turning heads for Capto system - 1 x driven boring head - 2 x angle drilling heads (manufacturer: Benz) Dimensions: - Turning diameter on faceplate: 2000 mm - Faceplate diameter: 1800 mm - Turning height with turning head L100: 1500 mm Performance at ram: - Clamping force of tool holder or accessories: 120,000 N - Max. feed force axes Z and X: 30,000 N - Drive power for milling, drilling, and grinding spindle: 37 kW - Speeds for turning operations: 10 – 3,000 rpm Travel: - X-axis (horizontal slide on crossbeam): -2,270 / +2,275 mm - Z-axis (vertical slide on crossbeam): 1,250 mm - C-axis (table rotation): 360° Feed rates: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min - C-axis: 3.25 rpm Coolant system: - Coolant/filtration capacity: 1,500 l Chain-type tool magazine with 80 positions: - Max. tool weight: 30 kg - Max. tool diameter with free adjacent spaces: 250 mm Disc magazine with 12 positions: - Max. weight of tool holder/accessory unit: 150 kg - Max. tool holder length: 500 mm - Max. magazine load: 1,000 kg Pallet changer with 2 pallets: - Pallet diameter: 1,800 mm - Pallet load capacity (centered): 5,000 kg - Pallet load capacity (off center): 4,000 kg Equipment / accessories: - 1x pallet with jaw boxes, diameter 1,800 mm - 1x hydraulic chuck with base jaws, diameter 1,800 mm - Various drilling and milling heads - Various turning tool holders - 2x probe sensors

Stanje: rabljeno, številka stroja/vozila: MR003046, Rabljeni stroj za izdelavo moznikov, v dobrem stanju. Takoj pripravljen za uporabo. Cena franko Staphorst. Proizvajalec: Goma Van Groeneweghe. Stroj je opremljen z žago in pokončno osjo. Tehnične specifikacije: - Serijska številka: 248 Hedpfjy I N Nkox Ahujnl

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame structure, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution during ram movement, contributing to long-term precision retention. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame and supporting parts - Bronze Zr14 guide bushings - WPQR & WPS approved welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in conformity with CE standards - PLC-controlled hydraulic system - 7'' DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status display - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 300 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieved Welding Procedure: TÜRK-AK accredited and WPQR & WPS certified welding according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Hnedpfx Aex N T E Eohujl Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7'' Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: rabljeno, Technical Details: Hnsdpsvb Dcajfx Ahuol Faceplate diameter: 1000 mm Swing diameter: 1600 mm Turning height: 1200 mm Main motor: 75 kW Faceplate speed range: 7 – 800 rpm Milling motor: 25 kW Milling spindle speed range: 7 – 3000 rpm Milling spindle taper: ISO 50 Crossrail vertical adjustment: 800 mm Ram dimensions: 240 x 240 mm Machine weight approx.: 40 t Space requirements approx.: 9 x 7.8 x 6.0 m Machine overhauled and modernized by the manufacturer in 2004 with CNC SIEMENS 840 D C-axis with driven tools Angular milling head Tool magazine rack Coolant system and chip conveyor