Nakup rabljenih strojev (200.000)

Stanje: delavnici obnovljeno (rabljeno), reinforced cast iron table, tiltable balanced cast iron flywheels precise upper & lower blade guides Tsdpfx Aqov Dg A Uotob Table dimensions approx. 680 x 580 mm Cast iron flywheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Stanje: novo, ATEX version Gear-driven radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Compressed air: 5–7 bar Note on used machinery: • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!) Tedpsh Ucqtofx Aqtsb

Stanje: zelo dobro (rabljeno), Direct drive Airflow rate: 12,000 m³/h Vacuum: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Todpfeh Tfqhsx Aqtob Discharge diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Technical specifications and prior sale subject to error. • Stated prices are ex-works, loaded onto transport free of charge. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: kot nova (razstavni stroj), Filter za čisti zrak Tip: Power Unit 250 P FU Vrsta ponudbe: demonstracijski stroj Tehnični podatki: Moč motorja: 7,5 kW / 3 Ph / 400 V / 50 Hz Premer sesalnega nastavka: 250 mm Nazivni volumenski pretok: 3.534 m3/h Maks. volumenski pretok: 4.900 m3/h Podtlak pri Vnenn: 3.184 Pa Filtrirna površina: 22,4 m2 Čiščenje s stisnjenim zrakom vklj. integrirani predločevalnik vklj. integrirani gasilni sistem Tedpfx Aqshfmpxetob vklj. inverter za regulacijo hitrosti vklj. integrirano zvočno izolacijo (- 4 dB(A)) Zbiralnik odrezkov: 2 x 250 l Raven zvočnega tlaka: 71 dB(A) vklj. prašno zaporo Dimenzije D x Š x V = 3000 x 1058 x 2361 mm Teža: 850 kg

Stanje: zelo dobro (rabljeno), Chain Mortising Machine PANHANS Drilling table size: 520 x 290 mm Tedpfx Ajza Dx Noqtsb Max. drilling depth: approx. 130 mm Max. drilling length: approx. 240 mm Height adjustment: approx. 135 mm Drill speed: 3000 rpm Motor power: 1.5 kW, 400 V, 50 Hz Required space (L x W): approx. 900 x 1100 mm Weight: approx. 220 kg 2-lever operation WESCOTT drill chuck, 20 mm Dowel drilling device with 4 stops (16, 22, 25, 32 mm) Mitre fence, continuously adjustable up to 45° 2 workpiece clamps Height adjustment via handwheel Motor protection switch with undervoltage release Workpiece stop, 1500 mm Includes inspection certificate for compliance with section 4 of the AM-VO Space requirement: approx. 950 mm x 1000 mm x 1300 mm Weight: approx. 200 kg Note regarding used machines: • Errors in technical data and prior sale excepted. • Prices listed are ex-location, free loading. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine at its location. • Special agreements are only valid if made in writing. (We only answer inquiries containing your address and telephone number!)

Stanje: zelo dobro (rabljeno), Motor power 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Todpfxevzramo Aqtsb Transverse travel: 300 mm Longitudinal travel: 150 mm Height adjustment: 170 mm Table height: 880 mm Weight approx. 280 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable passage height Z = 350 mm with H50 suction cups OF0165 Axis travel speed for Accord 40 fx PRO-SPEED version OF0168 Pendulum mode OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operating console with integrated PC Tsdpfeyfgzdsx Aqteb 450291 Additional fixed operating panel 870068 TECPAD - remote control for machine functions 560058 No. 10 MATIC support rails - L1825 230429 MAXI processing unit - Prisma KT 1 870046 Preparation for right-angle head "Prisma KT-KS" 470014 Air nozzle for tools 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 support rails 510205 Preparation for clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm, 36 pcs 480006 Suction cups H110 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving systems 210837 TR12 – side tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-Machine Interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operation interface software Maestro cnc OF0435 Maestro cnc hardware dongle 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED: - Increased max. panel width for complete machining up to 2,120 mm; beam length remains unchanged at 1,900 mm. - 10 support suction cups for offcuts. MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE NEW 2023 EUR 399,890.--

Stanje: novo, Equipment: Todpfedd Hi Esx Aqteb Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Tjdpfx Aev Tb Hgjqtsb Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Todor A Eq Rspfx Aqtsb Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Tedpjiknp Rsfx Aqtjb Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm Tjdpodcdwbsfx Aqtsb The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: delavnici obnovljeno (rabljeno), Heavy-Duty Surface Planer Robust German engineering Precision-planed machine tables, total table length 3,000 mm Table adjustment with ball bearing guide Chip removal adjustment with micrometer gauge Concave and pointed settings with scale display Heavy-duty cast iron fence – swivels 45° and height adjustable Machine completely rewired Automatic star-delta starter Motor protection switch Motor brake Emergency stop switch CE certified Cutterhead with 4 strip knives Cutterhead diameter: 120 mm Planing width: 410 mm Working table length: 3,000 mm Cutterhead speed: 5,000 rpm Motor: 400 V, 4.0 kW, 50 Hz Weight approx.: 1,050 kg Tsdpfx Aqevi H Nfstob Note on used machines: • Specifications subject to change and prior sale. • Quoted prices are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Tedsd Akyzjpfx Aqtsb Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor Todpfjdvn Hwex Aqtob • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Tjdpfjcq E Uujx Aqtob Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: zelo dobro (rabljeno), Surface Planer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence (tiltable), dimensions 1500x175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. depth of cut: 8 mm Extraction port: Ø 120 mm Table height: 860 mm Hydraulic table lifting/lowering with foot pedal Digital cutting depth display Noise-reducing combs on the cutterhead Star-delta starter Emergency stop button CE compliant Includes all documentation Todpfxsy Emf Rj Aqtsb Knife setting gauge NEW V-belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – free loading! • Machine has been cleaned and function-tested. • All machines are sold as seen and inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We answer inquiries only with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Throughfeed Moulder with 4 Spindles Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Spindle axial adjustment range: 30 mm Planer spindle adjustment range: 5 mm Planer spindle motor power: 5.5 kW Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Engines are braked Feed roller diameter: 140 mm Length of infeed table: 2,000 mm Pneumatic pressure for feed rollers Feed roller before first bottom spindle, pneumatically actuated Left pressure roller in front of machine infeed CE compliant Including 4 pcs. planing heads Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Tsdpoy Enlfjfx Aqtsb Note on used machines: • Technical data subject to errors and prior sale. • Specified prices are ex location - free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine onsite. • Special agreements are valid only in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Planing width: 520 mm Min./Max. working height: 3 - 240 mm Motor power: 5.5 kW, 400 V, 50 Hz Cutter shaft speed: 4500 rpm Cutter shaft diameter: 120 mm Planer knives: 4 pcs Thicknessing table dimensions: 520 x 850 mm Feed speed: 6.5 / 10 / 13 / 17 m/min Extraction port diameter: 150 mm Features: - Electric height adjustment - Hand wheel for fine adjustment of thicknessing table height - Helical-toothed steel infeed roller - Sectional pressure bar - 2 steel outfeed rollers - Under-table roller - Undervoltage release - Emergency stop switch - Knife setting gauge - Test report to confirm compliance with Section 4 of the AM-VO NEW drive belts NEW ball bearings NEW planer knives Approx. dimensions (L x W x H): 1120 x 990 x 1000 mm Approx. weight: 600 kg Note on used machinery: • Subject to errors in technical details and prior sale. • Prices quoted are ex works, free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Tjdpfoy Egmujx Aqtob

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. Todpfx Asydmaweqtjb • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Tedpjiiv Dcsfx Aqtsb Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: novo, Univerzalni drobilnik za les, palete, lesonitne plošče in ostanke, furnirje, MDF plošče, PVC,... SPLOŠNO: Siemens® PLC krmiljenje z zaslonom na dotik ReSmart™ inteligentni krmilni sistem (opcijski daljinski dostop) ReBoost™ funkcija – variabilna hitrost potisnega vozička za optimalno zmogljivost ob največjem prihranku energije ReMotion™ segmentno dno za linearno gibanje potisnega vozička, preprečeno zagozditev Vsi obrabni deli so na voljo v izjemno odporni HARDOX jekleni kakovosti (SSAB Švedska) Masiven, relativno velik dovodni lijak Robusten potisni voziček, premikan s težkim hidravličnim cilindrom Standardni rotor z velikim premerom, rezila iz kaljenega jekla Opcijski ‘W’ rotor in dimenzije rezil 30 x 30 ali 40 x 40 mm Kaljena, ob strani rotorja nameščena čistilna rezila – enostavna menjava Kaljene rezalne letve – dvostransko uporabne, enostavna menjava Pogonski motorji evropske industrijske kakovosti in v treh stopnjah moči Pogon motorja v zvezda-trikot postavitvi, zagon preko zaslona na dotik 2 leti ali 2000 delovnih ur ROBUST garancije TEHNIČNI PODATKI: Moč motorja: 22,0 kW Dolžina rotorja: 650 mm Premer rotorja: 270 mm Št. vrtljajev rotorja: 80 – 120 min⁻¹ Št. rezil: 28 kosov, kvadratna, brušena Št. čistilnih rezil: 2 kosa Premer sita: po izbiri, okrogle in kvadratne luknje Kapaciteta: 5 – 8 m³/h (odvisno od materiala) Odprtina lijaka: 1446 x 1342 mm Odprtina drobilnika: 1410 x 850 mm Količina hidravličnega olja: 30 l Dimenzije (d x š x v): 1920 x 1550 x 1790 mm Teža: pribl. 1750 kg MOŽNOSTI: - Moč motorja 30 kW - 2. rezalna letev HARDOX - Zobati profil na potisnem vozičku - HARDOX materialno sito - Zmogljivejši menjalnik - ReBoost™ hidravlična enota - Dovodni lijak po želji kupca - ReSmart™ z daljinskim dostopom & servisom Todpfx Aqehbdg Ujtob - SET kaljenih rezil - Cenik vseh razpoložljivih možnosti na zahtevo (Na povpraševanja odgovarjamo le, če navedete svoj naslov in telefonsko številko!)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Tsdsg Umrmspfx Aqtob Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Tjdpfx Aoc Tmygoqtjb Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Tjdpfx Aqey Emw Hotob Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)