Vračanje plošč

MAHROS SPINNER

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: nepreverjeno, največja širina rezanja: 4.500 mm, hitrost pomika os X: 140 m/min, dolžina odseka (maks.): 2.200 mm, Oprema: CE označba, dozator, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of crosscut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Dedpfsyxn Adjx Af Sekk Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible pusher system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, safeguarding, and use of the machine at the destination. External reference: 5711

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Dkodpfx Afeyxndbo Sek Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Dkjdpfx Aeyzy T Tof Sek System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Dkodsyzy Iwjpfx Af Ssk Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.400 mm, pomik osi Y: 1.300 mm, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 45 m/min, Oprema: CE označba, The machine has the following configuration: Drilling Groups: Upper group with 30 vertical and 6 horizontal spindles Milling Group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Dedpfoyzy S Njx Af Sjkk Milling Group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool Magazine 1: 24 positions, located at the rear of the machine Tool Magazine 2: 6 positions, located on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece through-feed height: 400 mm Axis X travel speed: 40 m/min Axis Y travel speed: 45 m/min Axis Z travel speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Support table with suction bars Number of suction bars: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial records of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8340

Stanje: rabljeno, številka stroja/vozila: 007234, Maximum panel width: 900 mm Dedpfswlpnnox Af Sekk Maximum panel length: 1200 mm Conveyor length: 8000 mm Part return for edge banding machine: left

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 2.000 mm, širina obdelovanca (maks.): 800 mm, dolžina transportnega traku: 5.700 mm, Oprema: CE označba, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Največja širina obdelovanca: 800 mm Dksdpfjxxafbex Af Sek Najmanjša dolžina obdelovanca: 140 mm Največja dolžina obdelovanca: 2.000 mm Dolžina transporterja: 5.700 mm PODROBNOSTI STROJA Dimenzije (D x Š): 5.700 x 1.000 mm OPREMA Povrat delov za lepilni stroj za robove na levi strani Izmet panela z banko z zračno zaveso Poganjanje panela z motorizirano preprogo CE označba