Rotorski zlagalnik

Magni RTH 6.35

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 34.900 mm, skupna dolžina: 9.290 mm, - Rotating Telescopic Handler RTH 6.35 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 34.90 m - Continuous 360-degree rotation - Engine: Volvo TAD 583 VE, Stage V - Rated power: 175 kW (238 HP) at 2,300 rpm - Maximum torque: 975 Nm at 1,380 rpm - Displacement: 5.13 l - Number of cylinders: 4 in-line - Engine configuration: diesel engine with direct injection and turbocharging - Cooling system: water-cooled intercooler - Drive type: hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Delivery volume: electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox gearbox with 2 speed ranges forward and reverse - Axles and brakes: axle type with planetary final drives - Rear axle: oscillating steering axle with hydraulic lock - Front axle: oscillating steering axle with automatic leveling +/- 8 degrees - Service brake: oil-immersed disc brakes on each axle, hydraulically actuated - Parking brake: negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Maximum travel speed: 40 km/h - Maximum tractive force at hook: 152 kN - Climbing ability: 65% - Turning radius (with forks): 7,000 mm - Diesel fuel: 270 l - AdBlue: 40 l - Hydraulic oil: 220 l - Engine oil: 16 l - Coolant: 40 l - Maximum operating pressure: 350 bar - Hydraulic system type: load sensing - Main pump: Danfoss / Rexroth variable displacement pump - Distributor for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2 - Distributor for outriggers: Bosch Rexroth electrohydraulic actuators Fodpfxoydqv Ns Ahmsph - Motion control: two Danfoss 2-axis joysticks with dead man’s device - Control system: CAN bus technology

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Fpsdpohua Dqofx Ahmjh Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, vrsta prenosa: samodejen, dvižna višina: 35.000 mm, Leto izdelave: 2022, KEY FEATURES - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75cm) - Front windscreen protective grille - Enclosed boom - Boom wipers for the extensions - LED work lights on boom and cab - Camera system (camera on front of boom, sides, and rear counterweight) - Advanced radio remote control with saw function and stabilizers - 40 km/h or 20 km/h travel speed - Vibration dampers - Support pads with holder EQUIPMENT - Maintenance-free wet multi-disc brakes on front and rear axles - Comfort seat with weight adjustment and armrests - Spacious pressurized cab with air conditioning and heating - Operation via intuitive 10-inch touchpad and navigation knob - ROPS/FOPS cab with optimal all-round visibility - 360° continuous rotation - 12V socket in cab - Automatic leveling of stabilizer outriggers - Attachment recognition - Levelling system on wheels - Road lighting according to StVZO regulations - TÜV package + TÜV certification Fpedpfeyfqunex Ahmeh - Customizable maneuver settings - Fork carriage with 1,200 mm forks APPLICATIONS - Safe sectional dismantling of trees - Specialist tree removal in urban and residential areas - Maintenance operations along roads and trackways - Removal of hazardous/problem trees - Tree felling on slopes and embankments - Ideal for municipal use - Storm damage clearance - Traffic and pathway safety EXCLUSIVE: THE MAGNI RTH 6.30 SH / 6.35 SH WITH WESTTECH WOODCRACKER® CS 750 SMART is available exclusively from us at Stefan Ebert GmbH in Burghaun. We are official Magni telescopic handler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the full range of Westtech Woodcracker products! On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. For further information, please visit our homepage. Errors and interim sale excepted! Available for rental = Further Information = Engine type: Diesel Lifting capacity: 6,000 kg Please contact Tobias Ebert for more information.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 5,7 kW (7,75 KM), vrsta prenosa: hidrostat, barva: zelen, skupna masa: 1.995 kg, dvižna moč: 2.820 kg/m, dvižna višina: 8.700 mm, velikost pnevmatike: Rubber tracks, stanje pnevmatik: 100 odstotek, Leto izdelave: 2021, obratovalne ure: 2 h, Oprema: dodatne luči, hidravlika, računalnik na krovu, === TECHNICAL DATA === Year of manufacture: 2021 Operating hours: 2 h Max. lifting capacity: 2,820 kg Max. lifting height: 8.7 m Jib outreach: 8.205 m Drive: Fully electric (lithium-ion battery) Remote control: Yes (radio remote control) Jib: Included Attachments / Additional equipment: Searcher hook, multi-position outriggers, programmable load moment limiter Track type: Rubber tracks Track condition: Very good / as new Weight: 1,995 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certificate and full documentation available Immediately ready for operation and transportable Comprehensive technical documentation available Fpjdpfsyidbmex Ahmoh Fully electric zero-emission mini crane Lithium-ion battery with fast-charge function Continuous operation possible during charging Compact and lightweight design Multi-position outriggers Radio remote control Eco work modes === CONDITION === Excellent condition (new) – fully inspected, serviced, and tested by certified professionals. Viewing possible by appointment. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / plus VAT). Reliable machines from first hand with complete service history and professional technical support. Benefit from one of Europe’s largest inventories of new and used machines. All machines are fully inspected, CE certified, and ready for use. Spare parts and technical support available upon request. === DELIVERY === Crane loading available on request. Flexible shipping options depending on destination and logistical requirements. All transport is professionally organized by the Collé Rental & Sales logistics team.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: električni, naslednji pregled (TÜV): 10/2025, Leto izdelave: 2020, obratovalne ure: 900 h, Oprema: UVV varnostni pregled, gumene gosenice, nizka raven hrupa, žerjav, Tip-top condition! Fpsdpfjvriuvex Ahmoh

Stanje: novo, Leto izdelave: 2025, 3-osni varilni obračalni stroj Protec KT 10 000 HV z nastavljanjem višine Komplet vključuje ročni in dvojni nožni daljinski upravljalnik Digitalni prikaz hitrosti Hidravlično nastavljanje višine Naklonsko območje 0 do 130° Mere: minimalna višina pri naklonu: 1050 mm maksimalna višina pri naklonu: 2200 mm minimalna višina v vodoravnem položaju: 1360 mm Premer vpenjalne plošče: 2000 mm Dolžina: 3250 mm, širina: 1700 mm Hitrost od 0,05 do približno 0,6 obr/min. Fpsdpfxemk T Rbs Ahmeh

Stanje: zelo dobro (rabljeno), 3,000 kg Load Capacity Welding Positioner, extremely robust table speed continuously adjustable from 0.05 to 0.6 rpm Fpodoncfwmjpfx Ahmjh clamping plate: square, 2200 mm bore diameter: 190 mm, T-slot width: 70 mm height when tilted to center: 1,600 mm tilt angle up to 135° length 2.0 m x width 1.4 m handheld remote control with digital display and foot pedal control

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 230 h, Basic information: Maximum lifting height on the rope: 8.8 m. Maximum lifting capacity: 2.9 t. Dimensions: 2.69 x 0.6 x 1.59 m. 360-degree continuous boom rotation. 9.6 kW diesel engine. Fpjdpfx Ahewf Sfijmjh Additional 4-phase, 400 V, 3.7 kW electric motor. Winch: 59.47 m. Dimensions with outriggers extended: max. 3.93 m x 3.88 m. Crane operating weight: 2,090 kg. Overload acoustic warning signal. Glasslift is a distributor of BG LIFT and UNIC mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA spider lifts. We are part of the GGR GROUP and have also introduced our own GLW series of transport trolleys. Thanks to our extensive range of equipment, we can offer machines tailored to the specific requirements of each job, ensuring we meet every customer's needs. At Glasslift, we don’t just deliver projects; we provide the tools for their efficient execution. In addition to sales, we also offer short- and long-term rental options for the aforementioned equipment. Glasslift is a professional team of operators specializing in comprehensive glass installation, steel handling, and the operation of structural components. Our team of experienced specialists has in-depth industry knowledge and is highly qualified, with each operator fully committed to completing entrusted projects. We have the necessary expertise, technical knowledge, and relevant substantive preparation, making us a partner you can fully trust. Our skills are supported by positive feedback, references, and publications about us, all of which attest to our reliability and professionalism. Work with the best to ensure comprehensive and efficient project delivery. For sale: USED Japanese mini crane UNIC URW-295 Perfect for window frame installation jobs. It features high durability, excellent adaptation to tough conditions, and compact dimensions. This is a unit in exceptional condition – operated exclusively by our staff. The crane has a valid UDT inspection certificate until April 2025.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 150 kW (203,94 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, poraba goriva na uro: 13 l/h, kapaciteta rezervoarja za gorivo: 180 l, barva: modra, skupna masa: 21.830 kg, lastna masa: 21.830 kg, obratovalna teža: 21.830 kg, največja dovoljena obremenitev: 6.000 kg, dvižna moč: 6.000 kg/m, dvižna višina: 29.900 mm, velikost pnevmatike: 445/65 R22.5, stanje pnevmatik: 90 odstotek, konfiguracija osi: 4x4, število sedežev: 1, emisijski razred: Euro 4, tip droga: teleskopski, Leto izdelave: 2017, obratovalne ure: 3.004 h, Oprema: CE označba, kabina, klimatska naprava, pogon na vsa štiri kolesa, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 3,004 h Max. lifting capacity: 6,000 kg Max. lift height: 29.90 m Max. reach: 25.40 m Drive: Diesel Transmission: Automatic (hydrostatic, 2 forward/reverse gears) All-wheel drive: Yes Stabilisers: Yes (scissor stabilisers) Cabin: Enclosed cabin with air conditioning and heating Heated cabin: Yes Fork length: 1,200 mm (standard pallet forks) Tyres: Off-road tyres (445/65 R22.5) Engine manufacturer: Mercedes OM 934 LA – 150 kW (203 hp) Emissions standard: Stage IV / Tier IV Final Weight: 21,830 kg CE certification: Yes === HIGHLIGHTS === Carefully sourced from reliable, traceable origins Supplied CE-certified with full documentation Rotating telehandler with 360° continuous rotation and 6-tonne lifting capacity Mercedes Stage IV engine with hydrostatic transmission Comfortable FOPS/ROPS cabin with air conditioning and joystick control Scissor stabilisers for maximum stability Fsdpsxdau Hefx Ahmsph Available immediately from stock in Sittard === CONDITION === Excellent condition – fully inspected, serviced, and tested by certified professionals. Viewing available on request. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide delivery available. Pricing on request (EXW / plus VAT). The Magni RTH 6.30 SH is a high-performance rotating telehandler offering nearly 30 metres lifting height and a 6-tonne payload. Equipped with a Mercedes Stage IV engine, hydrostatic drive, and all-wheel drive, this machine delivers outstanding performance, efficiency, and stability. Ideal for construction sites, assembly work, and heavy lifting applications. Fully CE-certified, ready for immediate use and available ex stock. === DELIVERY === Crane loading available on request for smooth shipping. Flexible delivery options depending on destination and logistics preference. All transport professionally coordinated by Collé Rental & Sales logistics team.

Stanje: novo, vrsta prenosa: polavtomatski, dvižna višina: 31.000 mm, Leto izdelave: 2024, obratovalne ure: 5 h, Magni RTH 6.31 SH Telescopic Handler, Year of manufacture: 2024, Operating hours: NEW!, Quick coupler, pallet forks, radio remote control, work platform preinstallation, 3rd hydraulic circuit, air conditioning, pressurized cab, radio/CD, touch-screen display, ROPS/FOBS cab, Engine: Volvo Penta [160kW/218hp], automatic leveling, variable stabilizers, 20km/h (optionally 40km/h), maximum lifting height: 30.80m, maximum horizontal reach: 26.90m, maximum lifting capacity: 6,000kg, manufacturer's warranty: 2 years / 2,000 hours, multiple units available!, Rental possible!, Optional for a surcharge: - Work platform, - Winch 1.5t to 8t, - Lifting hook, - Bucket, Upon request, we will be happy to provide you with a leasing or financing offer. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! Fpodpoyfq A Esfx Ahmoh Cab, rental possible. = More information = Engine type: Diesel Lifting capacity: 6,000 kg Please contact Tobias Ebert for further information.