Ploskovno-brusilni stroji

MAGERLE F12

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Gijdpoqiz N Rjfx Agwsp Lifting height: 9 meters

Stanje: dober (rabljeno), Automatische ROPP-afsluiter Merk: Bertolaso Gijdpfx Ajg Dvfwogwsp Type: Automatische ROPP (diefstalbeveiligde) afsluiter Model: Alfa 110-VH40 Capaciteit: Tot 2.000 doppen/uur Afmetingen (L x B x H): 1.800 x 800 x 1.800 mm Elektrisch: 380 Volt – 50 Hz Gereedschap: Naar keuze van de klant Kenmerken: Inclusief dop-sortering Levering: In huidige staat of aangepast naar klantspecificatie

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C3300, dolžina brušenja: 4.500 mm, širina brušenja: 300 mm, dolžina mize: 4.500 mm, širina mize: 300 mm, potrebna višina: 2.500 mm, zahteva za prostor dolžina: 13.700 mm, potrebna širina: 2.500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swivel range: ±90° Segment head diameter: 560 mm Spindle diameter at front bearing: 120 mm Godstqtn Dspfx Agwoip Swiveling: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction system: Hydrocyclone cleaning plant Auxiliary grinding unit ZU Feed rate: 2000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Stanje: rabljeno, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position controller - Backgauge adjustment via ball screw spindles - SICK light curtain safety system at the front for intervention protection - 3 support arms with ball rollers for material support - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine, extremely stable construction Space requirements (main machine) L x W x H: 4650 x 2610 x 3200 mm Weight (main machine): 27,000 kg Space required for transport (main machine) L x W x H: 4650 x 2610 x 3200 mm Transport space (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Giodpfx Agsd Hxx Aowop Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being newly sealed; the corresponding price adjustment will be made in the next few days.

Stanje: rabljeno, Leto izdelave: 2003, upravljanje BWO Največji premer glave: 700 mm Najmanjši premer noge: 50 mm Največja višina profila: 35 mm Število vrtljajev vretena: 0 - 5400 min⁻¹ Največja obremenitev mize: 500 kg Dimenzije stroja: 370x220x300 cm Skupna teža: pribl. 15.000 kg Obratovalne ure: 94.082 h Oprema: Upravljanje BWO Vse osi CNC krmiljene Odvod oljne megle Naprava za čiščenje hladilne tekočine s hladilno enoto Izravnalna enota Dittel Dodatki: Brusni koluti Ø400 mm z vključenimi koluti Gisdsxt Ur Sepfx Agwep Flanše za brusne kolute 1 diamantni stiskalni valj Dr. Kaiser Ø160 mm Kontra konica Krmilna omara: Širina 70 cm x dolžina 280 cm x višina 220 cm Stroj: Širina 220 cm x dolžina 370 cm x višina 300 cm Hladilni sistem: Širina 170 cm x dolžina 240 cm x višina 250 cm

Stanje: skoraj kot novo (rabljeno), Stroji za zobljanje ravnih stožčastih zobnikov GLEASON 104 Coniflex Specifikacije Proizvajalec: GLEASON Model: 104 Stanje: Rabljeno Serijska številka: 631406 Inventarna številka: DCN1749 Giodpfjxtpk Asx Agwep Največji premer: 432 mm Modul: 8,5 Min./maks. konusna razdalja: 0–305 mm Opis Oprema - Rezervna zobniška kolesa - Navodila za uporabo

Stanje: rabljeno, Leto izdelave: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For the hobbing of cylindrical and worm gears as well as all other regularly occurring hobbed profiles and shapes on cylindrical workpiece circumferences. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing of cylindrical gears for a wide range of industries: wind energy, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range is designed with future tool developments in mind. Of course, the hobbing head drive is also backlash-free. These machines are particularly suitable for the use of state-of-the-art cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped for both methods with the appropriate chip conveyor. The machine is equipped with an internal profile milling head as a motor-driven milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm --> Maximum machinable diameter: approx. 2,800 mm --> Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm --> Maximum axial slide travel (special version): 1,300 mm --> Maximum clampable cutter (internal milling head): --> Maximum diameter: 440 mm --> Maximum cutter width: 90 mm --> Swivel range of internal profile milling head/vertical axis: +/- 15° --> Cutter arbor taper: HSK-B160 --> Maximum cutter traverse path: 300 mm --> Table diameter: 2,500 mm --> Index gear diameter: 2,200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40,000 kg --> Max. feed and rapid traverse speeds: --> Axial (Z-axis): 4,000 mm/min --> Radial (X-axis): 3,000 mm/min Godpjwzyp Iefx Agwsip --> Tangential (Y-axis): 3,000 mm/min --> Cutter cooling lubrication system/Electric centrifugal pump: approx. 150 l/min --> Discharge height of elevated magnetic chip conveyor: 1,600 mm --> Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motorized milling head instead of standard motorized milling head --> Max. machinable profile depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm --> Infinitely variable cutter speed: 50 – 150 rpm --> Max. cutter diameter: 440 mm --> Min. cutter root circle diameter: 310 mm --> Max. cutter width: 90 mm --> Min. internal diameter at 0° helix angle: 800 mm *) --> Max. workpiece height at 0° helix angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Stanje: rabljeno, MOSTANA STANKO 1M65-5 TEŽKI STRUŽNIK S SREDIŠČEM IZDELOVALEC: MOSTANA STANKO, IZDELANO V ZSSR Giedpfx Aox Dmi Djgwop MODEL: 1M65-5 LETO: SREDINA 80-IH PREMER OBRATA NAD POSTELJO: 1000,0 mm PREMER OBRATA NAD SANMI: 650,0 mm VELIKOST VPAČNIKA: 1000,0 mm PREMER VRETENA: 135,0 mm OBRATI VRETENA: 5–500 o/min MOČ VRETENA: 22 kW DODATNO: AVTOMATSKI PODAJALNIK SANÍ METRIČNO IN COLSKO VREZOVANJE NAVOJEV 4-ČELJUSTNI VPAČNIK 1000,0 mm 2-OSNI DIGITALNI PRIKAZ ČISTA POSTELJA UPORABLJEN LE ZA KOMPOZITE, NE METALA

Stanje: rabljeno, Leto izdelave: 1996, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 80.000 kg, dolžina brušenja: 14.000 mm, premer brusilnega koluta: 915 mm, premer brušenja: 2.000 mm, poteza s peresom: 200 mm, premer tulec: 260 mm, teža obdelovanca med konicami: 80.000.000 g, premer obdelovanca med konicama: 2.000 mm, dolžina obdelovanca med konicami: 14.000 mm, moč: 35 kW (47,59 KM), High-capacity cylindrical grinder with hydrostatic guides POMINI model HD 402/425 – year 1996 – maximum diameter 2000 mm – working length 14000 mm – load capacity between centers 80,000 kg. Gedpetxlyxofx Agwsip Possibility of complete retrofit of the electrical unit, manageable upgrades or modifications for application changes. The grinding machine is disconnected and ready for collection.

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: Giedpfx Agecc D Ddswsp The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.