Črpalka za taljenje

MAAG extrex EX 110-5HP Eo

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), NEUE HERBOLD Granulator Universal Mill – Heavy-Duty Version - Year of manufacture: 1998 Dsdpfoh Rwc Eex Aplokl - Constructed from stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The granulate mixer is available in 6 versions: The design can be either in stainless steel or painted steel. Technical specifications: MV 2 The MV 2 enables complete mixing of the entire plastic granulate, thanks to the forced feed via the screw sleeve. Container capacity: 120 kg / 200 L Dimensions (L x W x): 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Removable screw - Mixing time control system - Extraction unit Dkjdpfxod R Atre Aplel - 1 discharge outlet - Mobile frame with castors, 100 mm diameter, all with locking brakes.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer / Coperion ZSK 83 dvovijačni ekstruder Naprodaj je dvovijačni ekstruder ZSK 83 (sosukajoči) proizvajalca Werner & Pfleiderer / Coperion. Stroj je v zelo dobrem stanju in redno vzdrževan. Tehnične podrobnosti: • Model: ZSK 83 • Sistemski polž: sosukajoča dvovijačnost • Moč motorja: 46 kW • Valj: vodno hlajen • Odzračevalno območje: prisotno • Doziranje: vključeno (glej slike) • Rezervni vijaki: na voljo • Krmilna omara / električna omarica: v dobrem stanju, popolnoma funkcionalna Djdpfsx Dkmgsx Apljkl Splošno: Linija je idealna za compounding, masterbatch, recikliranje, polimerne in polnilne aplikacije. Ekstruder je bil po potrebi obnovljen in tehnično pregledan. Ogled in testni zagon na lokaciji je možen po dogovoru. Možnost dostave po celem svetu. Za več informacij nas kontaktirajte – na voljo so dodatne fotografije, tehnični listi in videi.

Leto izdelave: 2022, stanje: novo, Niro-tech RX-150 enogredni lopatični mešalnik Dsdpshqnppofx Apljkl Ta model RX-150 je izdelan iz nerjavečega jekla. Stroj omogoča mešanje v obe smeri. Opremljen je z enim mešalnim gredom in vlago-odpornim upravljalnim panelom z gumbi. Moč motorja 1,5 kW omogoča 5–48 obratov na minuto. Prostornina posode je 150 litrov, kar omogoča polnjenje z do 110 kg mesa. Praznjenje poteka s prevračanjem bobna približno na 96 stopinj. Mešalnik je prilagojen za neposredno praznjenje v standardne vozičke s prostornino 200 litrov. Dimenzije stroja: 1300 x 700 x 1600 mm.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. Dsdpfjuxfupex Aplekl The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Leto izdelave: 2022, stanje: novo, For sale is an NS 2 conveyor belt from Mass International. The belt can be purchased either with or without a separating roller. Dkedpfx Asf E E Iqepljl The separating roller is available at an additional price of €332. Feed width: 600 mm Cleated belt length: 1300 mm Overall width: 405 mm Nominal width: 350 mm Belt speed constant: 3 m/min

Leto izdelave: 2021, stanje: novo, Overband Plate Magnet from Surplus Stock / Overstock Design in stainless steel grade 1.4301, fully sealed. Dkjdpjfktk Hjfx Aplel For sale is a plate magnet with threaded holes on the rear side. The magnet can either be installed as a "police magnet" or used for extracting metal contaminants above a conveyor belt. Lifting eye bolts for suspension are included. Magnet block dimensions: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other dimensions available from stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. Real, measured, and weighed quantities are continuously compared with setpoint values via a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous automatic optimization. The complete unit includes: - 2 supply hoppers for virgin material or regrind/virgin material - 2 supply hoppers for masterbatch or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, enabling recipe, regrind and process data management, vibration compensation, and continuous automatic optimization; built-in Ethernet port and standard reporting/printing functions. Technical data: - Average output: 60 kg/h Dedpfxewm Ii Tj Aplskl - Main component dosing range: 1–100% - Additive dosing range: 0.5–10% - Power supply: 1/N/PE 230 V 50 Hz - Power consumption: 100 W - Compressed air: 6–8 bar, oil- and water-free - Weight: approx. 60 kg ✅ Piovan material loaders as shown in the photos are included in the offer.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Dkjdpfx Apeh Akm Tjljl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal Milling Machine Manufacturer: KUNZMANN Model: WF 650 Year of manufacture: 2007 Dkedpfxewhm S Ne Apljl Technical Data Manufacturer: Kunzmann Model: WF 650 Year: 2007 X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speeds: 5 - 6500 rpm Quill stroke: 60 mm Swiveling vertical head: +/- 90° Table load: max. 400 kg Feeds (longitudinal/cross/vertical): 0 - 4000 mm/min Rapid traverse: 25 / 25 / 20 m/min Distance table / vertical milling spindle: 100 / 550 mm Distance table / horizontal spindle: 270 / 720 mm Number of tool magazine stations: 20 Tool diameter: 95 mm Tool diameter with 2 free spaces: 135 mm Tool length: max. 300 mm Tool weight: max. 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions (L x W x H): 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 CNC control - Operating manual - Full enclosure - Vertical head with extendable quill - Hydraulic tool clamping - Fixed table - Electronic hand pendant - Coolant system - Chip conveyor All information without guarantee. A demonstration is possible at any time in our exhibition hall.