Silos polpriklopnik

OMEPS

OMEPS Tipping Silo Semi-Trailer----Type: CR 60

Chassis:
Two fully automatically welded I-profile longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva

Axles and Suspension:
22.5" disc brakes, SAF axle assemblies, 3 x 9 t with air suspension, axle spacing is 2 x 1310 mm, raise/lower valve, loading manometer on top of tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable without tractor unit equipment, third axle liftable with Wabco Optiturn

Rims and Tyres:
6 wheels with 385/65 R22.5 tyres, manufacturer’s choice on Alcoa Dura Bright aluminium rims in 11.75 x 22.5 ET 120

Brake System:
EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake wear indicator connected

Landing Gear:
Lhjdox Nuf Tepfx Ah Ajr
Mechanical landing legs with two speeds, 2 x 20 t support load with swiveling foot, rear with crank supports

Electrical System:
All lights in LED version, 24 Volt electrical installation consisting of: One 15-pin socket mounted in front of the fifth wheel on the chassis beam, yellow side marker lights in the required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/EC-2007/35/EC, 2 multi-chamber lights at rear at turntable level on aluminium brackets, 1 LED work light on the tank, yellow warning light at rear mounted at hose pipes, 2x reversing lights in underride guard, 2x reversing lights at support height (switchable on the power console)

Tank Design:
A horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn)
Single-compartment tank with 60,000 ltr. volume, tank warranty: 24 months from delivery

Operating Parameters:
Pressure vessel built to Pressure Equipment Directive PED 97/23/EC. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80°

Filling Options:
5 manholes DN 450 with swivelling and hinged dome covers. The dome covers each are sealed pressure-tight with four wing nuts, rubber support for dome covers at the top for storage, rain strip closed at front, open at rear

Material Discharge:
1 material discharge cone DN 800 in stainless steel, foldable with stainless steel disc for loosening, side-swingable material discharge cone, shut-off valve DN 150 with white seal, STORZ-A connection

Air Piping:
A 2.5'' stainless steel air main line mounted on the RIGHT-hand operating side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off flaps) in stainless steel, vent hose and air connection hoses in 2" STORZ couplings, micron filter, vacuum valve at top of tank, 1x vibrator 1m before turntable

Ladder and Walkway:
1 aluminium ladder mounted rear left on vehicle, 1 aluminium safety scissors-type railing foldable from below with separate ladder section, locking brake when open, 1 aluminium safety walkway runs on the left top along tank, anti-slip coating on tank

Discharge Hose Carrier:
4 hose tube containers 5 m long, DN 200 aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.