Silos polpriklopnik

OMEPS

O.ME.P.S Tipping Silo Trailer----Type: CR 47

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" kingpin, tipping cylinder: Hyva

Axles and Suspension:
22.5" disc brake SAF axle assemblies 3x 9t with air suspension. The axle spacing is 2 x 1310 mm. Lift and lowering valve, loading manometer at the top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Rims and Tyres:
6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected

Landing Gear:
Mechanical landing gear with two speeds, 2x 20t support load with folding foot, rear without stand

Electrical System:
All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the coupling plate on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multi-chamber rear lights mounted at pivot height on aluminum brackets to standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning light at the rear mounted at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at support height (individually switchable on energy console)

Tank Version:
A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank with 47,000 liters capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar - operating overpressure 2.0 bar, operating temperature -40° to +80°

Filling Options:
4 manholes DN 450 with pivoting and folding domed covers. Each domed cover is pressure-tight sealed with 4 wing nuts, rubber support for domed cover on top for storage, rain rail closed at front - open at rear

Material Discharge:
1 material discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivels to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A
Lhjdpfx Aex Nufmoh Aer

Air Piping:
One 2.5” stainless steel air collector pipe mounted on the operator side RIGHT, one 4” stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off dampers) in INOX, upper air and air connection hoses with 2” STORZ couplings, micron filter, vacuum valve on top of tank, 1x vibrator 1m in front of the pivot

Ladder and Walkway:
1 aluminum ladder mounted on the left rear of the vehicle, 1 aluminum safety scissor railing deployable from below with separate ladder folding section and parking brake when open, 1 aluminum safety walkway runs along the left upper side of the tank, anti-slip coating on tank

Discharge Hose Carriers:
4 hose carrying tubes, 5m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose carrier with compressor hose D.76

Accessories: The lateral collision guard

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.